diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2021-11-06 14:36:12 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2021-11-06 14:36:12 -0700 |
| commit | 0c5c62ddf88c34bc83b66e4ac9beb2bb0e1887d4 (patch) | |
| tree | f1043e124056c7f2a061f2d2e5240aa687534633 /drivers/pci | |
| parent | 512b7931ad0561ffe14265f9ff554a3c081b476b (diff) | |
| parent | dda4b381f05d447a0ae31e2e44aeb35d313a311f (diff) | |
| download | linux-0c5c62ddf88c34bc83b66e4ac9beb2bb0e1887d4.tar.gz linux-0c5c62ddf88c34bc83b66e4ac9beb2bb0e1887d4.tar.bz2 linux-0c5c62ddf88c34bc83b66e4ac9beb2bb0e1887d4.zip | |
Merge tag 'pci-v5.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Conserve IRQs by setting up portdrv IRQs only when there are users
(Jan Kiszka)
- Rework and simplify _OSC negotiation for control of PCIe features
(Joerg Roedel)
- Remove struct pci_dev.driver pointer since it's redundant with the
struct device.driver pointer (Uwe Kleine-König)
Resource management:
- Coalesce contiguous host bridge apertures from _CRS to accommodate
BARs that cover more than one aperture (Kai-Heng Feng)
Sysfs:
- Check CAP_SYS_ADMIN before parsing user input (Krzysztof
Wilczyński)
- Return -EINVAL consistently from "store" functions (Krzysztof
Wilczyński)
- Use sysfs_emit() in endpoint "show" functions to avoid buffer
overruns (Kunihiko Hayashi)
PCIe native device hotplug:
- Ignore Link Down/Up caused by resets during error recovery so
endpoint drivers can remain bound to the device (Lukas Wunner)
Virtualization:
- Avoid bus resets on Atheros QCA6174, where they hang the device
(Ingmar Klein)
- Work around Pericom PI7C9X2G switch packet drop erratum by using
store and forward mode instead of cut-through (Nathan Rossi)
- Avoid trying to enable AtomicOps on VFs; the PF setting applies to
all VFs (Selvin Xavier)
MSI:
- Document that /sys/bus/pci/devices/.../irq contains the legacy INTx
interrupt or the IRQ of the first MSI (not MSI-X) vector (Barry
Song)
VPD:
- Add pci_read_vpd_any() and pci_write_vpd_any() to access anywhere
in the possible VPD space; use these to simplify the cxgb3 driver
(Heiner Kallweit)
Peer-to-peer DMA:
- Add (not subtract) the bus offset when calculating DMA address
(Wang Lu)
ASPM:
- Re-enable LTR at Downstream Ports so they don't report Unsupported
Requests when reset or hot-added devices send LTR messages
(Mingchuang Qiao)
Apple PCIe controller driver:
- Add driver for Apple M1 PCIe controller (Alyssa Rosenzweig, Marc
Zyngier)
Cadence PCIe controller driver:
- Return success when probe succeeds instead of falling into error
path (Li Chen)
HiSilicon Kirin PCIe controller driver:
- Reorganize PHY logic and add support for external PHY drivers
(Mauro Carvalho Chehab)
- Support PERST# GPIOs for HiKey970 external PEX 8606 bridge (Mauro
Carvalho Chehab)
- Add Kirin 970 support (Mauro Carvalho Chehab)
- Make driver removable (Mauro Carvalho Chehab)
Intel VMD host bridge driver:
- If IOMMU supports interrupt remapping, leave VMD MSI-X remapping
enabled (Adrian Huang)
- Number each controller so we can tell them apart in
/proc/interrupts (Chunguang Xu)
- Avoid building on UML because VMD depends on x86 bare metal APIs
(Johannes Berg)
Marvell Aardvark PCIe controller driver:
- Define macros for PCI_EXP_DEVCTL_PAYLOAD_* (Pali Rohár)
- Set Max Payload Size to 512 bytes per Marvell spec (Pali Rohár)
- Downgrade PIO Response Status messages to debug level (Marek Behún)
- Preserve CRS SV (Config Request Retry Software Visibility) bit in
emulated Root Control register (Pali Rohár)
- Fix issue in configuring reference clock (Pali Rohár)
- Don't clear status bits for masked interrupts (Pali Rohár)
- Don't mask unused interrupts (Pali Rohár)
- Avoid code repetition in advk_pcie_rd_conf() (Marek Behún)
- Retry config accesses on CRS response (Pali Rohár)
- Simplify emulated Root Capabilities initialization (Pali Rohár)
- Fix several link training issues (Pali Rohár)
- Fix link-up checking via LTSSM (Pali Rohár)
- Fix reporting of Data Link Layer Link Active (Pali Rohár)
- Fix emulation of W1C bits (Marek Behún)
- Fix MSI domain .alloc() method to return zero on success (Marek
Behún)
- Read entire 16-bit MSI vector in MSI handler, not just low 8 bits
(Marek Behún)
- Clear Root Port I/O Space, Memory Space, and Bus Master Enable bits
at startup; PCI core will set those as necessary (Pali Rohár)
- When operating as a Root Port, set class code to "PCI Bridge"
instead of the default "Mass Storage Controller" (Pali Rohár)
- Add emulation for PCI_BRIDGE_CTL_BUS_RESET since aardvark doesn't
implement this per spec (Pali Rohár)
- Add emulation of option ROM BAR since aardvark doesn't implement
this per spec (Pali Rohár)
MediaTek MT7621 PCIe controller driver:
- Add MediaTek MT7621 PCIe host controller driver and DT binding
(Sergio Paracuellos)
Qualcomm PCIe controller driver:
- Add SC8180x compatible string (Bjorn Andersson)
- Add endpoint controller driver and DT binding (Manivannan
Sadhasivam)
- Restructure to use of_device_get_match_data() (Prasad Malisetty)
- Add SC7280-specific pcie_1_pipe_clk_src handling (Prasad Malisetty)
Renesas R-Car PCIe controller driver:
- Remove unnecessary includes (Geert Uytterhoeven)
Rockchip DesignWare PCIe controller driver:
- Add DT binding (Simon Xue)
Socionext UniPhier Pro5 controller driver:
- Serialize INTx masking/unmasking (Kunihiko Hayashi)
Synopsys DesignWare PCIe controller driver:
- Run dwc .host_init() method before registering MSI interrupt
handler so we can deal with pending interrupts left by bootloader
(Bjorn Andersson)
- Clean up Kconfig dependencies (Andy Shevchenko)
- Export symbols to allow more modular drivers (Luca Ceresoli)
TI DRA7xx PCIe controller driver:
- Allow host and endpoint drivers to be modules (Luca Ceresoli)
- Enable external clock if present (Luca Ceresoli)
TI J721E PCIe driver:
- Disable PHY when probe fails after initializing it (Christophe
JAILLET)
MicroSemi Switchtec management driver:
- Return error to application when command execution fails because an
out-of-band reset has cleared the device BARs, Memory Space Enable,
etc (Kelvin Cao)
- Fix MRPC error status handling issue (Kelvin Cao)
- Mask out other bits when reading of management VEP instance ID
(Kelvin Cao)
- Return EOPNOTSUPP instead of ENOTSUPP from sysfs show functions
(Kelvin Cao)
- Add check of event support (Logan Gunthorpe)
Miscellaneous:
- Remove unused pci_pool wrappers, which have been replaced by
dma_pool (Cai Huoqing)
- Use 'unsigned int' instead of bare 'unsigned' (Krzysztof
Wilczyński)
- Use kstrtobool() directly, sans strtobool() wrapper (Krzysztof
Wilczyński)
- Fix some sscanf(), sprintf() format mismatches (Krzysztof
Wilczyński)
- Update PCI subsystem information in MAINTAINERS (Krzysztof
Wilczyński)
- Correct some misspellings (Krzysztof Wilczyński)"
* tag 'pci-v5.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (137 commits)
PCI: Add ACS quirk for Pericom PI7C9X2G switches
PCI: apple: Configure RID to SID mapper on device addition
iommu/dart: Exclude MSI doorbell from PCIe device IOVA range
PCI: apple: Implement MSI support
PCI: apple: Add INTx and per-port interrupt support
PCI: kirin: Allow removing the driver
PCI: kirin: De-init the dwc driver
PCI: kirin: Disable clkreq during poweroff sequence
PCI: kirin: Move the power-off code to a common routine
PCI: kirin: Add power_off support for Kirin 960 PHY
PCI: kirin: Allow building it as a module
PCI: kirin: Add MODULE_* macros
PCI: kirin: Add Kirin 970 compatible
PCI: kirin: Support PERST# GPIOs for HiKey970 external PEX 8606 bridge
PCI: apple: Set up reference clocks when probing
PCI: apple: Add initial hardware bring-up
PCI: of: Allow matching of an interrupt-map local to a PCI device
of/irq: Allow matching of an interrupt-map local to an interrupt controller
irqdomain: Make of_phandle_args_to_fwspec() generally available
PCI: Do not enable AtomicOps on VFs
...
Diffstat (limited to 'drivers/pci')
65 files changed, 3776 insertions, 745 deletions
diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig index 326f7d13024f..e917bb3652bb 100644 --- a/drivers/pci/controller/Kconfig +++ b/drivers/pci/controller/Kconfig @@ -254,7 +254,7 @@ config PCIE_MEDIATEK_GEN3 MediaTek SoCs. config VMD - depends on PCI_MSI && X86_64 && SRCU + depends on PCI_MSI && X86_64 && SRCU && !UML tristate "Intel Volume Management Device Driver" help Adds support for the Intel Volume Management Device (VMD). VMD is a @@ -312,6 +312,32 @@ config PCIE_HISI_ERR Say Y here if you want error handling support for the PCIe controller's errors on HiSilicon HIP SoCs +config PCIE_APPLE_MSI_DOORBELL_ADDR + hex + default 0xfffff000 + depends on PCIE_APPLE + +config PCIE_APPLE + tristate "Apple PCIe controller" + depends on ARCH_APPLE || COMPILE_TEST + depends on OF + depends on PCI_MSI_IRQ_DOMAIN + select PCI_HOST_COMMON + help + Say Y here if you want to enable PCIe controller support on Apple + system-on-chips, like the Apple M1. This is required for the USB + type-A ports, Ethernet, Wi-Fi, and Bluetooth. + + If unsure, say Y if you have an Apple Silicon system. + +config PCIE_MT7621 + tristate "MediaTek MT7621 PCIe Controller" + depends on (RALINK && SOC_MT7621) || (MIPS && COMPILE_TEST) + select PHY_MT7621_PCI + default SOC_MT7621 + help + This selects a driver for the MediaTek MT7621 PCIe Controller. + source "drivers/pci/controller/dwc/Kconfig" source "drivers/pci/controller/mobiveil/Kconfig" source "drivers/pci/controller/cadence/Kconfig" diff --git a/drivers/pci/controller/Makefile b/drivers/pci/controller/Makefile index aaf30b3dcc14..37c8663de7fe 100644 --- a/drivers/pci/controller/Makefile +++ b/drivers/pci/controller/Makefile @@ -37,6 +37,9 @@ obj-$(CONFIG_VMD) += vmd.o obj-$(CONFIG_PCIE_BRCMSTB) += pcie-brcmstb.o obj-$(CONFIG_PCI_LOONGSON) += pci-loongson.o obj-$(CONFIG_PCIE_HISI_ERR) += pcie-hisi-error.o +obj-$(CONFIG_PCIE_APPLE) += pcie-apple.o +obj-$(CONFIG_PCIE_MT7621) += pcie-mt7621.o + # pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW obj-y += dwc/ obj-y += mobiveil/ diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c index ffb176d288cd..918e11082e6a 100644 --- a/drivers/pci/controller/cadence/pci-j721e.c +++ b/drivers/pci/controller/cadence/pci-j721e.c @@ -474,7 +474,7 @@ static int j721e_pcie_probe(struct platform_device *pdev) ret = clk_prepare_enable(clk); if (ret) { dev_err(dev, "failed to enable pcie_refclk\n"); - goto err_get_sync; + goto err_pcie_setup; } pcie->refclk = clk; diff --git a/drivers/pci/controller/cadence/pcie-cadence-plat.c b/drivers/pci/controller/cadence/pcie-cadence-plat.c index 5fee0f89ab59..a224afadbcc0 100644 --- a/drivers/pci/controller/cadence/pcie-cadence-plat.c +++ b/drivers/pci/controller/cadence/pcie-cadence-plat.c @@ -127,6 +127,8 @@ static int cdns_plat_pcie_probe(struct platform_device *pdev) goto err_init; } + return 0; + err_init: err_get_sync: pm_runtime_put_sync(dev); diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig index 76c0a63a3f64..62ce3abf0f19 100644 --- a/drivers/pci/controller/dwc/Kconfig +++ b/drivers/pci/controller/dwc/Kconfig @@ -8,22 +8,20 @@ config PCIE_DW config PCIE_DW_HOST bool - depends on PCI_MSI_IRQ_DOMAIN select PCIE_DW config PCIE_DW_EP bool - depends on PCI_ENDPOINT select PCIE_DW config PCI_DRA7XX - bool + tristate config PCI_DRA7XX_HOST - bool "TI DRA7xx PCIe controller Host Mode" + tristate "TI DRA7xx PCIe controller Host Mode" depends on SOC_DRA7XX || COMPILE_TEST - depends on PCI_MSI_IRQ_DOMAIN depends on OF && HAS_IOMEM && TI_PIPE3 + depends on PCI_MSI_IRQ_DOMAIN select PCIE_DW_HOST select PCI_DRA7XX default y if SOC_DRA7XX @@ -36,10 +34,10 @@ config PCI_DRA7XX_HOST This uses the DesignWare core. config PCI_DRA7XX_EP - bool "TI DRA7xx PCIe controller Endpoint Mode" + tristate "TI DRA7xx PCIe controller Endpoint Mode" depends on SOC_DRA7XX || COMPILE_TEST - depends on PCI_ENDPOINT depends on OF && HAS_IOMEM && TI_PIPE3 + depends on PCI_ENDPOINT select PCIE_DW_EP select PCI_DRA7XX help @@ -55,7 +53,7 @@ config PCIE_DW_PLAT config PCIE_DW_PLAT_HOST bool "Platform bus based DesignWare PCIe Controller - Host mode" - depends on PCI && PCI_MSI_IRQ_DOMAIN + depends on PCI_MSI_IRQ_DOMAIN select PCIE_DW_HOST select PCIE_DW_PLAT help @@ -138,8 +136,8 @@ config PCI_LAYERSCAPE bool "Freescale Layerscape PCIe controller - Host mode" depends on OF && (ARM || ARCH_LAYERSCAPE || COMPILE_TEST) depends on PCI_MSI_IRQ_DOMAIN - select MFD_SYSCON select PCIE_DW_HOST + select MFD_SYSCON help Say Y here if you want to enable PCIe controller support on Layerscape SoCs to work in Host mode. @@ -180,6 +178,16 @@ config PCIE_QCOM PCIe controller uses the DesignWare core plus Qualcomm-specific hardware wrappers. +config PCIE_QCOM_EP + tristate "Qualcomm PCIe controller - Endpoint mode" + depends on OF && (ARCH_QCOM || COMPILE_TEST) + depends on PCI_ENDPOINT + select PCIE_DW_EP + help + Say Y here to enable support for the PCIe controllers on Qualcomm SoCs + to work in endpoint mode. The PCIe controller uses the DesignWare core + plus Qualcomm-specific hardware wrappers. + config PCIE_ARMADA_8K bool "Marvell Armada-8K PCIe controller" depends on ARCH_MVEBU || COMPILE_TEST @@ -266,7 +274,7 @@ config PCIE_KEEMBAY_EP config PCIE_KIRIN depends on OF && (ARM64 || COMPILE_TEST) - bool "HiSilicon Kirin series SoCs PCIe controllers" + tristate "HiSilicon Kirin series SoCs PCIe controllers" depends on PCI_MSI_IRQ_DOMAIN select PCIE_DW_HOST help @@ -283,8 +291,8 @@ config PCIE_HISI_STB config PCI_MESON tristate "MESON PCIe controller" - depends on PCI_MSI_IRQ_DOMAIN default m if ARCH_MESON + depends on PCI_MSI_IRQ_DOMAIN select PCIE_DW_HOST help Say Y here if you want to enable PCI controller support on Amlogic diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile index 73244409792c..8ba7b67f5e50 100644 --- a/drivers/pci/controller/dwc/Makefile +++ b/drivers/pci/controller/dwc/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone.o obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o obj-$(CONFIG_PCI_LAYERSCAPE_EP) += pci-layerscape-ep.o obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o +obj-$(CONFIG_PCIE_QCOM_EP) += pcie-qcom-ep.o obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o obj-$(CONFIG_PCIE_ROCKCHIP_DW_HOST) += pcie-dw-rockchip.o diff --git a/drivers/pci/controller/dwc/pci-dra7xx.c b/drivers/pci/controller/dwc/pci-dra7xx.c index fbbb78f6885e..a4221f6f3629 100644 --- a/drivers/pci/controller/dwc/pci-dra7xx.c +++ b/drivers/pci/controller/dwc/pci-dra7xx.c @@ -7,6 +7,7 @@ * Authors: Kishon Vijay Abraham I <kishon@ti.com> */ +#include <linux/clk.h> #include <linux/delay.h> #include <linux/device.h> #include <linux/err.h> @@ -14,7 +15,7 @@ #include <linux/irq.h> #include <linux/irqdomain.h> #include <linux/kernel.h> -#include <linux/init.h> +#include <linux/module.h> #include <linux/of_device.h> #include <linux/of_gpio.h> #include <linux/of_pci.h> @@ -90,6 +91,7 @@ struct dra7xx_pcie { int phy_count; /* DT phy-names count */ struct phy **phy; struct irq_domain *irq_domain; + struct clk *clk; enum dw_pcie_device_mode mode; }; @@ -607,6 +609,7 @@ static const struct of_device_id of_dra7xx_pcie_match[] = { }, {}, }; +MODULE_DEVICE_TABLE(of, of_dra7xx_pcie_match); /* * dra7xx_pcie_unaligned_memaccess: workaround for AM572x/AM571x Errata i870 @@ -740,6 +743,15 @@ static int dra7xx_pcie_probe(struct platform_device *pdev) if (!link) return -ENOMEM; + dra7xx->clk = devm_clk_get_optional(dev, NULL); + if (IS_ERR(dra7xx->clk)) + return dev_err_probe(dev, PTR_ERR(dra7xx->clk), + "clock request failed"); + + ret = clk_prepare_enable(dra7xx->clk); + if (ret) + return ret; + for (i = 0; i < phy_count; i++) { snprintf(name, sizeof(name), "pcie-phy%d", i); phy[i] = devm_phy_get(dev, name); @@ -925,6 +937,8 @@ static void dra7xx_pcie_shutdown(struct platform_device *pdev) pm_runtime_disable(dev); dra7xx_pcie_disable_phy(dra7xx); + + clk_disable_unprepare(dra7xx->clk); } static const struct dev_pm_ops dra7xx_pcie_pm_ops = { @@ -943,4 +957,8 @@ static struct platform_driver dra7xx_pcie_driver = { }, .shutdown = dra7xx_pcie_shutdown, }; -builtin_platform_driver(dra7xx_pcie_driver); +module_platform_driver(dra7xx_pcie_driver); + +MODULE_AUTHOR("Kishon Vijay Abraham I <kishon@ti.com>"); +MODULE_DESCRIPTION("PCIe controller driver for TI DRA7xx SoCs"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c index 80fc98acf097..26f49f797b0f 100644 --- a/drivers/pci/controller/dwc/pci-imx6.c +++ b/drivers/pci/controller/dwc/pci-imx6.c @@ -1132,7 +1132,7 @@ static int imx6_pcie_probe(struct platform_device *pdev) /* Limit link speed */ pci->link_gen = 1; - ret = of_property_read_u32(node, "fsl,max-link-speed", &pci->link_gen); + of_property_read_u32(node, "fsl,max-link-speed", &pci->link_gen); imx6_pcie->vpcie = devm_regulator_get_optional(&pdev->dev, "vpcie"); if (IS_ERR(imx6_pcie->vpcie)) { diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c index 998b698f4085..0eda8236c125 100644 --- a/drivers/pci/controller/dwc/pcie-designware-ep.c +++ b/drivers/pci/controller/dwc/pcie-designware-ep.c @@ -83,6 +83,7 @@ void dw_pcie_ep_reset_bar(struct dw_pcie *pci, enum pci_barno bar) for (func_no = 0; func_no < funcs; func_no++) __dw_pcie_ep_reset_bar(pci, func_no, bar, 0); } +EXPORT_SYMBOL_GPL(dw_pcie_ep_reset_bar); static u8 __dw_pcie_ep_find_next_cap(struct dw_pcie_ep *ep, u8 func_no, u8 cap_ptr, u8 cap) @@ -485,6 +486,7 @@ int dw_pcie_ep_raise_legacy_irq(struct dw_pcie_ep *ep, u8 func_no) return -EINVAL; } +EXPORT_SYMBOL_GPL(dw_pcie_ep_raise_legacy_irq); int dw_pcie_ep_raise_msi_irq(struct dw_pcie_ep *ep, u8 func_no, u8 interrupt_num) @@ -536,6 +538,7 @@ int dw_pcie_ep_raise_msi_irq(struct dw_pcie_ep *ep, u8 func_no, return 0; } +EXPORT_SYMBOL_GPL(dw_pcie_ep_raise_msi_irq); int dw_pcie_ep_raise_msix_irq_doorbell(struct dw_pcie_ep *ep, u8 func_no, u16 interrupt_num) diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c index d1d9b8344ec9..f4755f3a03be 100644 --- a/drivers/pci/controller/dwc/pcie-designware-host.c +++ b/drivers/pci/controller/dwc/pcie-designware-host.c @@ -335,6 +335,16 @@ int dw_pcie_host_init(struct pcie_port *pp) if (pci->link_gen < 1) pci->link_gen = of_pci_get_max_link_speed(np); + /* Set default bus ops */ + bridge->ops = &dw_pcie_ops; + bridge->child_ops = &dw_child_pcie_ops; + + if (pp->ops->host_init) { + ret = pp->ops->host_init(pp); + if (ret) + return ret; + } + if (pci_msi_enabled()) { pp->has_msi_ctrl = !(pp->ops->msi_host_init || of_property_read_bool(np, "msi-parent") || @@ -388,15 +398,6 @@ int dw_pcie_host_init(struct pcie_port *pp) } } - /* Set default bus ops */ - bridge->ops = &dw_pcie_ops; - bridge->child_ops = &dw_child_pcie_ops; - - if (pp->ops->host_init) { - ret = pp->ops->host_init(pp); - if (ret) - goto err_free_msi; - } dw_pcie_iatu_detect(pci); dw_pcie_setup_rc(pp); diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c index a945f0c0e73d..850b4533f4ef 100644 --- a/drivers/pci/controller/dwc/pc |
