Merge tag 'arm-soc-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "There are a couple of subsystems maintained by other people that merge
  their drivers through the SoC tree, those changes include:

   - The SCMI firmware framework gains support for sensor notifications
     and for controlling voltage domains.

   - A large update for the Tegra memory controller driver, integrating
     it better with the interconnect framework

   - The memory controller subsystem gains support for Mediatek MT8192

   - The reset controller framework gains support for sharing pulsed
     resets

  For Soc specific drivers in drivers/soc, the main changes are

   - The Allwinner/sunxi MBUS gets a rework for the way it handles
     dma_map_ops and offsets between physical and dma address spaces.

   - An errata fix plus some cleanups for Freescale Layerscape SoCs

   - A cleanup for renesas drivers regarding MMIO accesses.

   - New SoC specific drivers for Mediatek MT8192 and MT8183 power
     domains

   - New SoC specific drivers for Aspeed AST2600 LPC bus control and SoC
     identification.

   - Core Power Domain support for Qualcomm MSM8916, MSM8939, SDM660 and
     SDX55.

   - A rework of the TI AM33xx 'genpd' power domain support to use
     information from DT instead of platform data

   - Support for TI AM64x SoCs

   - Allow building some Amlogic drivers as modules instead of built-in

  Finally, there are numerous cleanups and smaller bug fixes for
  Mediatek, Tegra, Samsung, Qualcomm, TI OMAP, Amlogic, Rockchips,
  Renesas, and Xilinx SoCs"

* tag 'arm-soc-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (222 commits)
  soc: mediatek: mmsys: Specify HAS_IOMEM dependency for MTK_MMSYS
  firmware: xilinx: Properly align function parameter
  firmware: xilinx: Add a blank line after function declaration
  firmware: xilinx: Remove additional newline
  firmware: xilinx: Fix kernel-doc warnings
  firmware: xlnx-zynqmp: fix compilation warning
  soc: xilinx: vcu: add missing register NUM_CORE
  soc: xilinx: vcu: use vcu-settings syscon registers
  dt-bindings: soc: xlnx: extract xlnx, vcu-settings to separate binding
  soc: xilinx: vcu: drop useless success message
  clk: samsung: mark PM functions as __maybe_unused
  soc: samsung: exynos-chipid: initialize later - with arch_initcall
  soc: samsung: exynos-chipid: order list of SoCs by name
  memory: jz4780_nemc: Fix potential NULL dereference in jz4780_nemc_probe()
  memory: ti-emif-sram: only build for ARMv7
  memory: tegra30: Support interconnect framework
  memory: tegra20: Support hardware versioning and clean up OPP table initialization
  dt-bindings: memory: tegra20-emc: Document opp-supported-hw property
  soc: rockchip: io-domain: Fix error return code in rockchip_iodomain_probe()
  reset-controller: ti: force the write operation when assert or deassert
  ...

1 files changed, 34 insertions, 3 deletions

diff --git a/drivers/soc/aspeed/aspeed-lpc-ctrl.c b/drivers/soc/aspeed/aspeed-lpc-ctrl.c
index 01ed21e8bfee..439bcd6b8c4a 100644
--- a/drivers/soc/aspeed/aspeed-lpc-ctrl.c
+++ b/drivers/soc/aspeed/aspeed-lpc-ctrl.c
@@ -4,6 +4,7 @@
  */
 
 #include <linux/clk.h>
+#include <linux/log2.h>
 #include <linux/mfd/syscon.h>
 #include <linux/miscdevice.h>
 #include <linux/mm.h>
@@ -21,6 +22,9 @@
 #define HICR5_ENL2H	BIT(8)
 #define HICR5_ENFWH	BIT(10)
 
+#define HICR6 0x4
+#define SW_FWH2AHB	BIT(17)
+
 #define HICR7 0x8
 #define HICR8 0xc
 
@@ -30,8 +34,9 @@ struct aspeed_lpc_ctrl {
 	struct clk		*clk;
 	phys_addr_t		mem_base;
 	resource_size_t		mem_size;
-	u32		pnor_size;
-	u32		pnor_base;
+	u32			pnor_size;
+	u32			pnor_base;
+	bool			fwh2ahb;
 };
 
 static struct aspeed_lpc_ctrl *file_aspeed_lpc_ctrl(struct file *file)
@@ -177,6 +182,16 @@ static long aspeed_lpc_ctrl_ioctl(struct file *file, unsigned int cmd,
 			return rc;
 
 		/*
+		 * Switch to FWH2AHB mode, AST2600 only.
+		 *
+		 * The other bits in this register are interrupt status bits
+		 * that are cleared by writing 1. As we don't want to clear
+		 * them, set only the bit of interest.
+		 */
+		if (lpc_ctrl->fwh2ahb)
+			regmap_write(lpc_ctrl->regmap, HICR6, SW_FWH2AHB);
+
+		/*
 		 * Enable LPC FHW cycles. This is required for the host to
 		 * access the regions specified.
 		 */
@@ -241,6 +256,18 @@ static int aspeed_lpc_ctrl_probe(struct platform_device *pdev)
 
 		lpc_ctrl->mem_size = resource_size(&resm);
 		lpc_ctrl->mem_base = resm.start;
+
+		if (!is_power_of_2(lpc_ctrl->mem_size)) {
+			dev_err(dev, "Reserved memory size must be a power of 2, got %u\n",
+			       (unsigned int)lpc_ctrl->mem_size);
+			return -EINVAL;
+		}
+
+		if (!IS_ALIGNED(lpc_ctrl->mem_base, lpc_ctrl->mem_size)) {
+			dev_err(dev, "Reserved memory must be naturally aligned for size %u\n",
+			       (unsigned int)lpc_ctrl->mem_size);
+			return -EINVAL;
+		}
 	}
 
 	lpc_ctrl->regmap = syscon_node_to_regmap(
@@ -261,6 +288,9 @@ static int aspeed_lpc_ctrl_probe(struct platform_device *pdev)
 		return rc;
 	}
 
+	if (of_device_is_compatible(dev->of_node, "aspeed,ast2600-lpc-ctrl"))
+		lpc_ctrl->fwh2ahb = true;
+
 	lpc_ctrl->miscdev.minor = MISC_DYNAMIC_MINOR;
 	lpc_ctrl->miscdev.name = DEVICE_NAME;
 	lpc_ctrl->miscdev.fops = &aspeed_lpc_ctrl_fops;
@@ -291,6 +321,7 @@ static int aspeed_lpc_ctrl_remove(struct platform_device *pdev)
 static const struct of_device_id aspeed_lpc_ctrl_match[] = {
 	{ .compatible = "aspeed,ast2400-lpc-ctrl" },
 	{ .compatible = "aspeed,ast2500-lpc-ctrl" },
+	{ .compatible = "aspeed,ast2600-lpc-ctrl" },
 	{ },
 };
 
@@ -308,4 +339,4 @@ module_platform_driver(aspeed_lpc_ctrl_driver);
 MODULE_DEVICE_TABLE(of, aspeed_lpc_ctrl_match);
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Cyril Bur <cyrilbur@gmail.com>");
-MODULE_DESCRIPTION("Control for aspeed 2400/2500 LPC HOST to BMC mappings");
+MODULE_DESCRIPTION("Control for ASPEED LPC HOST to BMC mappings");