Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Olof Johansson:
 "Driver updates for ARM SoCs.

  A slew of changes this release cycle.  The reset driver tree, that we
  merge through arm-soc for historical reasons, is also sizable this
  time around.

  Among the changes:

   - clps711x: Treewide changes to compatible strings, merged here for simplicity.
   - Qualcomm: SCM firmware driver cleanups, move to platform driver
   - ux500: Major cleanups, removal of old mach-specific infrastructure.
   - Atmel external bus memory driver
   - Move of brcmstb platform to the rest of bcm
   - PMC driver updates for tegra, various fixes and improvements
   - Samsung platform driver updates to support 64-bit Exynos platforms
   - Reset controller cleanups moving to devm_reset_controller_register() APIs
   - Reset controller driver for Amlogic Meson
   - Reset controller driver for Hisilicon hi6220
   - ARM SCPI power domain support"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (100 commits)
  ARM: ux500: consolidate base platform files
  ARM: ux500: move soc_id driver to drivers/soc
  ARM: ux500: call ux500_setup_id later
  ARM: ux500: consolidate soc_device code in id.c
  ARM: ux500: remove cpu_is_u* helpers
  ARM: ux500: use CLK_OF_DECLARE()
  ARM: ux500: move l2x0 init to .init_irq
  mfd: db8500 stop passing around platform data
  ASoC: ab8500-codec: remove platform data based probe
  ARM: ux500: move ab8500_regulator_plat_data into driver
  ARM: ux500: remove unused regulator data
  soc: raspberrypi-power: add CONFIG_OF dependency
  firmware: scpi: add CONFIG_OF dependency
  video: clps711x-fb: Changing the compatibility string to match with the smallest supported chip
  input: clps711x-keypad: Changing the compatibility string to match with the smallest supported chip
  pwm: clps711x: Changing the compatibility string to match with the smallest supported chip
  serial: clps711x: Changing the compatibility string to match with the smallest supported chip
  irqchip: clps711x: Changing the compatibility string to match with the smallest supported chip
  clocksource: clps711x: Changing the compatibility string to match with the smallest supported chip
  clk: clps711x: Changing the compatibility string to match with the smallest supported chip
  ...

1 files changed, 106 insertions, 19 deletions

diff --git a/drivers/soc/qcom/wcnss_ctrl.c b/drivers/soc/qcom/wcnss_ctrl.c
index c544f3d2c6ee..520aedd29965 100644
--- a/drivers/soc/qcom/wcnss_ctrl.c
+++ b/drivers/soc/qcom/wcnss_ctrl.c
@@ -1,4 +1,5 @@
 /*
+ * Copyright (c) 2016, Linaro Ltd.
  * Copyright (c) 2015, Sony Mobile Communications Inc.
  *
  * This program is free software; you can redistribute it and/or modify
@@ -14,8 +15,16 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/soc/qcom/smd.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/soc/qcom/wcnss_ctrl.h>
 
 #define WCNSS_REQUEST_TIMEOUT	(5 * HZ)
+#define WCNSS_CBC_TIMEOUT	(10 * HZ)
+
+#define WCNSS_ACK_DONE_BOOTING	1
+#define WCNSS_ACK_COLD_BOOTING	2
 
 #define NV_FRAGMENT_SIZE	3072
 #define NVBIN_FILE		"wlan/prima/WCNSS_qcom_wlan_nv.bin"
@@ -25,17 +34,19 @@
  * @dev:	device handle
  * @channel:	SMD channel handle
  * @ack:	completion for outstanding requests
+ * @cbc:	completion for cbc complete indication
  * @ack_status:	status of the outstanding request
- * @download_nv_work: worker for uploading nv binary
+ * @probe_work: worker for uploading nv binary
  */
 struct wcnss_ctrl {
 	struct device *dev;
 	struct qcom_smd_channel *channel;
 
 	struct completion ack;
+	struct completion cbc;
 	int ack_status;
 
-	struct work_struct download_nv_work;
+	struct work_struct probe_work;
 };
 
 /* message types */
@@ -48,6 +59,11 @@ enum {
 	WCNSS_UPLOAD_CAL_RESP,
 	WCNSS_DOWNLOAD_CAL_REQ,
 	WCNSS_DOWNLOAD_CAL_RESP,
+	WCNSS_VBAT_LEVEL_IND,
+	WCNSS_BUILD_VERSION_REQ,
+	WCNSS_BUILD_VERSION_RESP,
+	WCNSS_PM_CONFIG_REQ,
+	WCNSS_CBC_COMPLETE_IND,
 };
 
 /**
@@ -128,7 +144,7 @@ static int wcnss_ctrl_smd_callback(struct qcom_smd_channel *channel,
 			 version->major, version->minor,
 			 version->version, version->revision);
 
-		schedule_work(&wcnss->download_nv_work);
+		complete(&wcnss->ack);
 		break;
 	case WCNSS_DOWNLOAD_NV_RESP:
 		if (count != sizeof(*nvresp)) {
@@ -141,6 +157,10 @@ static int wcnss_ctrl_smd_callback(struct qcom_smd_channel *channel,
 		wcnss->ack_status = nvresp->status;
 		complete(&wcnss->ack);
 		break;
+	case WCNSS_CBC_COMPLETE_IND:
+		dev_dbg(wcnss->dev, "cold boot complete\n");
+		complete(&wcnss->cbc);
+		break;
 	default:
 		dev_info(wcnss->dev, "unknown message type %d\n", hdr->type);
 		break;
@@ -156,20 +176,32 @@ static int wcnss_ctrl_smd_callback(struct qcom_smd_channel *channel,
 static int wcnss_request_version(struct wcnss_ctrl *wcnss)
 {
 	struct wcnss_msg_hdr msg;
+	int ret;
 
 	msg.type = WCNSS_VERSION_REQ;
 	msg.len = sizeof(msg);
+	ret = qcom_smd_send(wcnss->channel, &msg, sizeof(msg));
+	if (ret < 0)
+		return ret;
+
+	ret = wait_for_completion_timeout(&wcnss->ack, WCNSS_CBC_TIMEOUT);
+	if (!ret) {
+		dev_err(wcnss->dev, "timeout waiting for version response\n");
+		return -ETIMEDOUT;
+	}
 
-	return qcom_smd_send(wcnss->channel, &msg, sizeof(msg));
+	return 0;
 }
 
 /**
  * wcnss_download_nv() - send nv binary to WCNSS
- * @work:	work struct to acquire wcnss context
+ * @wcnss:	wcnss_ctrl state handle
+ * @expect_cbc:	indicator to caller that an cbc event is expected
+ *
+ * Returns 0 on success. Negative errno on failure.
  */
-static void wcnss_download_nv(struct work_struct *work)
+static int wcnss_download_nv(struct wcnss_ctrl *wcnss, bool *expect_cbc)
 {
-	struct wcnss_ctrl *wcnss = container_of(work, struct wcnss_ctrl, download_nv_work);
 	struct wcnss_download_nv_req *req;
 	const struct firmware *fw;
 	const void *data;
@@ -178,10 +210,10 @@ static void wcnss_download_nv(struct work_struct *work)
 
 	req = kzalloc(sizeof(*req) + NV_FRAGMENT_SIZE, GFP_KERNEL);
 	if (!req)
-		return;
+		return -ENOMEM;
 
 	ret = request_firmware(&fw, NVBIN_FILE, wcnss->dev);
-	if (ret) {
+	if (ret < 0) {
 		dev_err(wcnss->dev, "Failed to load nv file %s: %d\n",
 			NVBIN_FILE, ret);
 		goto free_req;
@@ -207,7 +239,7 @@ static void wcnss_download_nv(struct work_struct *work)
 		memcpy(req->fragment, data, req->frag_size);
 
 		ret = qcom_smd_send(wcnss->channel, req, req->hdr.len);
-		if (ret) {
+		if (ret < 0) {
 			dev_err(wcnss->dev, "failed to send smd packet\n");
 			goto release_fw;
 		}
@@ -220,16 +252,58 @@ static void wcnss_download_nv(struct work_struct *work)
 	} while (left > 0);
 
 	ret = wait_for_completion_timeout(&wcnss->ack, WCNSS_REQUEST_TIMEOUT);
-	if (!ret)
+	if (!ret) {
 		dev_err(wcnss->dev, "timeout waiting for nv upload ack\n");
-	else if (wcnss->ack_status != 1)
-		dev_err(wcnss->dev, "nv upload response failed err: %d\n",
-			wcnss->ack_status);
+		ret = -ETIMEDOUT;
+	} else {
+		*expect_cbc = wcnss->ack_status == WCNSS_ACK_COLD_BOOTING;
+		ret = 0;
+	}
 
 release_fw:
 	release_firmware(fw);
 free_req:
 	kfree(req);
+
+	return ret;
+}
+
+/**
+ * qcom_wcnss_open_channel() - open additional SMD channel to WCNSS
+ * @wcnss:	wcnss handle, retrieved from drvdata
+ * @name:	SMD channel name
+ * @cb:		callback to handle incoming data on the channel
+ */
+struct qcom_smd_channel *qcom_wcnss_open_channel(void *wcnss, const char *name, qcom_smd_cb_t cb)
+{
+	struct wcnss_ctrl *_wcnss = wcnss;
+
+	return qcom_smd_open_channel(_wcnss->channel, name, cb);
+}
+EXPORT_SYMBOL(qcom_wcnss_open_channel);
+
+static void wcnss_async_probe(struct work_struct *work)
+{
+	struct wcnss_ctrl *wcnss = container_of(work, struct wcnss_ctrl, probe_work);
+	bool expect_cbc;
+	int ret;
+
+	ret = wcnss_request_version(wcnss);
+	if (ret < 0)
+		return;
+
+	ret = wcnss_download_nv(wcnss, &expect_cbc);
+	if (ret < 0)
+		return;
+
+	/* Wait for pending cold boot completion if indicated by the nv downloader */
+	if (expect_cbc) {
+		ret = wait_for_completion_timeout(&wcnss->cbc, WCNSS_REQUEST_TIMEOUT);
+		if (!ret)
+			dev_err(wcnss->dev, "expected cold boot completion\n");
+	}
+
+	of_platform_populate(wcnss->dev->of_node, NULL, NULL, wcnss->dev);
 }
 
 static int wcnss_ctrl_probe(struct qcom_smd_device *sdev)
@@ -244,25 +318,38 @@ static int wcnss_ctrl_probe(struct qcom_smd_device *sdev)
 	wcnss->channel = sdev->channel;
 
 	init_completion(&wcnss->ack);
-	INIT_WORK(&wcnss->download_nv_work, wcnss_download_nv);
+	init_completion(&wcnss->cbc);
+	INIT_WORK(&wcnss->probe_work, wcnss_async_probe);
 
 	qcom_smd_set_drvdata(sdev->channel, wcnss);
+	dev_set_drvdata(&sdev->dev, wcnss);
+
+	schedule_work(&wcnss->probe_work);
+
+	return 0;
+}
+
+static void wcnss_ctrl_remove(struct qcom_smd_device *sdev)
+{
+	struct wcnss_ctrl *wcnss = qcom_smd_get_drvdata(sdev->channel);
 
-	return wcnss_request_version(wcnss);
+	cancel_work_sync(&wcnss->probe_work);
+	of_platform_depopulate(&sdev->dev);
 }
 
-static const struct qcom_smd_id wcnss_ctrl_smd_match[] = {
-	{ .name = "WCNSS_CTRL" },
+static const struct of_device_id wcnss_ctrl_of_match[] = {
+	{ .compatible = "qcom,wcnss", },
 	{}
 };
 
 static struct qcom_smd_driver wcnss_ctrl_driver = {
 	.probe = wcnss_ctrl_probe,
+	.remove = wcnss_ctrl_remove,
 	.callback = wcnss_ctrl_smd_callback,
-	.smd_match_table = wcnss_ctrl_smd_match,
 	.driver  = {
 		.name  = "qcom_wcnss_ctrl",
 		.owner = THIS_MODULE,
+		.of_match_table = wcnss_ctrl_of_match,
 	},
 };