diff options
| author | Mark Brown <broonie@kernel.org> | 2024-06-26 20:09:28 +0100 |
|---|---|---|
| committer | Mark Brown <broonie@kernel.org> | 2024-06-26 20:09:28 +0100 |
| commit | db576ed76232875ca92372771bfd247ad47b46ce (patch) | |
| tree | 8fd09d0b674931515bfe869440fc72d75d5578f9 /drivers/spi/spi.c | |
| parent | b147ae7ae5141cb10c520d372ecabb2c520210c4 (diff) | |
| parent | 84fbd6198766336f627ba08f073fd9970729074e (diff) | |
| download | linux-db576ed76232875ca92372771bfd247ad47b46ce.tar.gz linux-db576ed76232875ca92372771bfd247ad47b46ce.tar.bz2 linux-db576ed76232875ca92372771bfd247ad47b46ce.zip | |
Add USB VBUS regulator for RZ/G2L
Merge series from Biju Das <biju.das.jz@bp.renesas.com>:
As per RZ/G2L HW manual, VBUS enable can be controlled by the VBOUT bit of
the VBUS Control Register(VBENCTL) register in the USBPHY Control. But
this IP is in the Reset block.
Reset driver exposes this register as regmap and instantiate the USB VBUS
regulator device. Consumers(phy device) can use regulator APIs to control
VBUS as controlling is done in the atomic context using a new API which
is added for the purpose.
Diffstat (limited to 'drivers/spi/spi.c')
| -rw-r--r-- | drivers/spi/spi.c | 16 |
1 files changed, 10 insertions, 6 deletions
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 9bc9fd10d538..fc13fa192189 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -689,10 +689,12 @@ static int __spi_add_device(struct spi_device *spi) * Make sure that multiple logical CS doesn't map to the same physical CS. * For example, spi->chip_select[0] != spi->chip_select[1] and so on. */ - for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) { - status = spi_dev_check_cs(dev, spi, idx, spi, idx + 1); - if (status) - return status; + if (!spi_controller_is_target(ctlr)) { + for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) { + status = spi_dev_check_cs(dev, spi, idx, spi, idx + 1); + if (status) + return status; + } } /* Set the bus ID string */ @@ -4156,7 +4158,8 @@ static int __spi_validate(struct spi_device *spi, struct spi_message *message) return -EINVAL; if (xfer->tx_nbits != SPI_NBITS_SINGLE && xfer->tx_nbits != SPI_NBITS_DUAL && - xfer->tx_nbits != SPI_NBITS_QUAD) + xfer->tx_nbits != SPI_NBITS_QUAD && + xfer->tx_nbits != SPI_NBITS_OCTAL) return -EINVAL; if ((xfer->tx_nbits == SPI_NBITS_DUAL) && !(spi->mode & (SPI_TX_DUAL | SPI_TX_QUAD))) @@ -4171,7 +4174,8 @@ static int __spi_validate(struct spi_device *spi, struct spi_message *message) return -EINVAL; if (xfer->rx_nbits != SPI_NBITS_SINGLE && xfer->rx_nbits != SPI_NBITS_DUAL && - xfer->rx_nbits != SPI_NBITS_QUAD) + xfer->rx_nbits != SPI_NBITS_QUAD && + xfer->rx_nbits != SPI_NBITS_OCTAL) return -EINVAL; if ((xfer->rx_nbits == SPI_NBITS_DUAL) && !(spi->mode & (SPI_RX_DUAL | SPI_RX_QUAD))) |