ssb: Remove home-grown printk wrappers

Replace the ssb printk wrappers by standard print helpers.
Also remove SSB_SILENT. Nobody should use it anyway.

Originally submitted by Joe Perches <joe@perches.com>.
Modified to add dev_... based printks.

Signed-off-by: Michael Buesch <m@bues.ch>
Tested-by: Michael Buesch <m@bues.ch>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

19 files changed, 152 insertions, 189 deletions

diff --git a/drivers/ssb/Kconfig b/drivers/ssb/Kconfig
index c574dd210500..6c438c819eb9 100644
--- a/drivers/ssb/Kconfig
+++ b/drivers/ssb/Kconfig
@@ -89,21 +89,9 @@ config SSB_HOST_SOC
 
 	  If unsure, say N
 
-config SSB_SILENT
-	bool "No SSB kernel messages"
-	depends on SSB && EXPERT
-	help
-	  This option turns off all Sonics Silicon Backplane printks.
-	  Note that you won't be able to identify problems, once
-	  messages are turned off.
-	  This might only be desired for production kernels on
-	  embedded devices to reduce the kernel size.
-
-	  Say N
-
 config SSB_DEBUG
 	bool "SSB debugging"
-	depends on SSB && !SSB_SILENT
+	depends on SSB
 	help
 	  This turns on additional runtime checks and debugging
 	  messages. Turn this on for SSB troubleshooting.
diff --git a/drivers/ssb/b43_pci_bridge.c b/drivers/ssb/b43_pci_bridge.c
index bed2fedeb057..9c7316b5685f 100644
--- a/drivers/ssb/b43_pci_bridge.c
+++ b/drivers/ssb/b43_pci_bridge.c
@@ -10,12 +10,12 @@
  * Licensed under the GNU/GPL. See COPYING for details.
  */
 
+#include "ssb_private.h"
+
 #include <linux/pci.h>
 #include <linux/module.h>
 #include <linux/ssb/ssb.h>
 
-#include "ssb_private.h"
-
 
 static const struct pci_device_id b43_pci_bridge_tbl[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4301) },
diff --git a/drivers/ssb/bridge_pcmcia_80211.c b/drivers/ssb/bridge_pcmcia_80211.c
index d70568ea02d5..f51f150307df 100644
--- a/drivers/ssb/bridge_pcmcia_80211.c
+++ b/drivers/ssb/bridge_pcmcia_80211.c
@@ -6,6 +6,8 @@
  * Licensed under the GNU/GPL. See COPYING for details.
  */
 
+#include "ssb_private.h"
+
 #include <linux/ssb/ssb.h>
 #include <linux/slab.h>
 #include <linux/module.h>
@@ -15,8 +17,6 @@
 #include <pcmcia/ds.h>
 #include <pcmcia/cisreg.h>
 
-#include "ssb_private.h"
-
 static const struct pcmcia_device_id ssb_host_pcmcia_tbl[] = {
 	PCMCIA_DEVICE_MANF_CARD(0x2D0, 0x448),
 	PCMCIA_DEVICE_MANF_CARD(0x2D0, 0x476),
@@ -70,7 +70,7 @@ err_disable:
 err_kfree_ssb:
 	kfree(ssb);
 out_error:
-	ssb_err("Initialization failed (%d, %d)\n", res, err);
+	dev_err(&dev->dev, "Initialization failed (%d, %d)\n", res, err);
 	return err;
 }
 
diff --git a/drivers/ssb/driver_chipcommon.c b/drivers/ssb/driver_chipcommon.c
index 7cb7d2c8fd86..48050c6fd847 100644
--- a/drivers/ssb/driver_chipcommon.c
+++ b/drivers/ssb/driver_chipcommon.c
@@ -9,14 +9,14 @@
  * Licensed under the GNU/GPL. See COPYING for details.
  */
 
+#include "ssb_private.h"
+
 #include <linux/ssb/ssb.h>
 #include <linux/ssb/ssb_regs.h>
 #include <linux/export.h>
 #include <linux/pci.h>
 #include <linux/bcm47xx_wdt.h>
 
-#include "ssb_private.h"
-
 
 /* Clock sources */
 enum ssb_clksrc {
@@ -354,7 +354,7 @@ void ssb_chipcommon_init(struct ssb_chipcommon *cc)
 
 	if (cc->dev->id.revision >= 11)
 		cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT);
-	ssb_dbg("chipcommon status is 0x%x\n", cc->status);
+	dev_dbg(cc->dev->dev, "chipcommon status is 0x%x\n", cc->status);
 
 	if (cc->dev->id.revision >= 20) {
 		chipco_write32(cc, SSB_CHIPCO_GPIOPULLUP, 0);
diff --git a/drivers/ssb/driver_chipcommon_pmu.c b/drivers/ssb/driver_chipcommon_pmu.c
index c5352ea4821e..e28682a53cdf 100644
--- a/drivers/ssb/driver_chipcommon_pmu.c
+++ b/drivers/ssb/driver_chipcommon_pmu.c
@@ -8,6 +8,8 @@
  * Licensed under the GNU/GPL. See COPYING for details.
  */
 
+#include "ssb_private.h"
+
 #include <linux/ssb/ssb.h>
 #include <linux/ssb/ssb_regs.h>
 #include <linux/ssb/ssb_driver_chipcommon.h>
@@ -17,8 +19,6 @@
 #include <linux/bcm47xx_nvram.h>
 #endif
 
-#include "ssb_private.h"
-
 static u32 ssb_chipco_pll_read(struct ssb_chipcommon *cc, u32 offset)
 {
 	chipco_write32(cc, SSB_CHIPCO_PLLCTL_ADDR, offset);
@@ -110,7 +110,7 @@ static void ssb_pmu0_pllinit_r0(struct ssb_chipcommon *cc,
 		return;
 	}
 
-	ssb_info("Programming PLL to %u.%03u MHz\n",
+	dev_info(cc->dev->dev, "Programming PLL to %u.%03u MHz\n",
 		 crystalfreq / 1000, crystalfreq % 1000);
 
 	/* First turn the PLL off. */
@@ -138,7 +138,7 @@ static void ssb_pmu0_pllinit_r0(struct ssb_chipcommon *cc,
 	}
 	tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
 	if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)
-		ssb_emerg("Failed to turn the PLL off!\n");
+		dev_emerg(cc->dev->dev, "Failed to turn the PLL off!\n");
 
 	/* Set PDIV in PLL control 0. */
 	pllctl = ssb_chipco_pll_read(cc, SSB_PMU0_PLLCTL0);
@@ -249,7 +249,7 @@ static void ssb_pmu1_pllinit_r0(struct ssb_chipcommon *cc,
 		return;
 	}
 
-	ssb_info("Programming PLL to %u.%03u MHz\n",
+	dev_info(cc->dev->dev, "Programming PLL to %u.%03u MHz\n",
 		 crystalfreq / 1000, crystalfreq % 1000);
 
 	/* First turn the PLL off. */
@@ -275,7 +275,7 @@ static void ssb_pmu1_pllinit_r0(struct ssb_chipcommon *cc,
 	}
 	tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
 	if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)
-		ssb_emerg("Failed to turn the PLL off!\n");
+		dev_emerg(cc->dev->dev, "Failed to turn the PLL off!\n");
 
 	/* Set p1div and p2div. */
 	pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL0);
@@ -349,7 +349,7 @@ static void ssb_pmu_pll_init(struct ssb_chipcommon *cc)
 	case 43222:
 		break;
 	default:
-		ssb_err("ERROR: PLL init unknown for device %04X\n",
+		dev_err(cc->dev->dev, "ERROR: PLL init unknown for device %04X\n",
 			bus->chip_id);
 	}
 }
@@ -471,7 +471,7 @@ static void ssb_pmu_resources_init(struct ssb_chipcommon *cc)
 		max_msk = 0xFFFFF;
 		break;
 	default:
-		ssb_err("ERROR: PMU resource config unknown for device %04X\n",
+		dev_err(cc->dev->dev, "ERROR: PMU resource config unknown for device %04X\n",
 			bus->chip_id);
 	}
 
@@ -524,7 +524,7 @@ void ssb_pmu_init(struct ssb_chipcommon *cc)
 	pmucap = chipco_read32(cc, SSB_CHIPCO_PMU_CAP);
 	cc->pmu.rev = (pmucap & SSB_CHIPCO_PMU_CAP_REVISION);
 
-	ssb_dbg("Found rev %u PMU (capabilities 0x%08X)\n",
+	dev_dbg(cc->dev->dev, "Found rev %u PMU (capabilities 0x%08X)\n",
 		cc->pmu.rev, pmucap);
 
 	if (cc->pmu.rev == 1)
@@ -636,7 +636,7 @@ u32 ssb_pmu_get_alp_clock(struct ssb_chipcommon *cc)
 	case 0x5354:
 		return ssb_pmu_get_alp_clock_clk0(cc);
 	default:
-		ssb_err("ERROR: PMU alp clock unknown for device %04X\n",
+		dev_err(cc->dev->dev, "ERROR: PMU alp clock unknown for device %04X\n",
 			bus->chip_id);
 		return 0;
 	}
@@ -651,7 +651,7 @@ u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc)
 		/* 5354 chip uses a non programmable PLL of frequency 240MHz */
 		return 240000000;
 	default:
-		ssb_err("ERROR: PMU cpu clock unknown for device %04X\n",
+		dev_err(cc->dev->dev, "ERROR: PMU cpu clock unknown for device %04X\n",
 			bus->chip_id);
 		return 0;
 	}
@@ -665,7 +665,7 @@ u32 ssb_pmu_get_controlclock(struct ssb_chipcommon *cc)
 	case 0x5354:
 		return 120000000;
 	default:
-		ssb_err("ERROR: PMU controlclock unknown for device %04X\n",
+		dev_err(cc->dev->dev, "ERROR: PMU controlclock unknown for device %04X\n",
 			bus->chip_id);
 		return 0;
 	}
@@ -705,9 +705,9 @@ void ssb_pmu_spuravoid_pllupdate(struct ssb_chipcommon *cc, int spuravoid)
 		pmu_ctl = SSB_CHIPCO_PMU_CTL_PLL_UPD;
 		break;
 	default:
-		ssb_printk(KERN_ERR PFX
-			   "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
-			   cc->dev->bus->chip_id);
+		dev_err(cc->dev->dev,
+			"Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
+			cc->dev->bus->chip_id);
 		return;
 	}
 
diff --git a/drivers/ssb/driver_chipcommon_sflash.c b/drivers/ssb/driver_chipcommon_sflash.c
index 937fc31971a7..fac0e6828288 100644
--- a/drivers/ssb/driver_chipcommon_sflash.c
+++ b/drivers/ssb/driver_chipcommon_sflash.c
@@ -5,10 +5,10 @@
  * Licensed under the GNU/GPL. See COPYING for details.
  */
 
-#include <linux/ssb/ssb.h>
-
 #include "ssb_private.h"
 
+#include <linux/ssb/ssb.h>
+
 static struct resource ssb_sflash_resource = {
 	.name	= "ssb_sflash",
 	.start	= SSB_FLASH2,
@@ -80,7 +80,7 @@ static void ssb_sflash_cmd(struct ssb_chipcommon *cc, u32 opcode)
 			return;
 		cpu_relax();
 	}
-	pr_err("SFLASH control command failed (timeout)!\n");
+	dev_err(cc->dev->dev, "SFLASH control command failed (timeout)!\n");
 }
 
 /* Initialize serial flash access */
diff --git a/drivers/ssb/driver_extif.c b/drivers/ssb/driver_extif.c
index 59385fdab5b0..06b68dd6e022 100644
--- a/drivers/ssb/driver_extif.c
+++ b/drivers/ssb/driver_extif.c
@@ -10,12 +10,12 @@
  * Licensed under the GNU/GPL. See COPYING for details.
  */
 
+#include "ssb_private.h"
+
 #include <linux/serial.h>
 #include <linux/serial_core.h>
 #include <linux/serial_reg.h>
 
-#include "ssb_private.h"
-
 
 static inline u32 extif_read32(struct ssb_extif *extif, u16 offset)
 {
diff --git a/drivers/ssb/driver_gpio.c b/drivers/ssb/driver_gpio.c
index 796e22037bc4..6ce4abf7d473 100644
--- a/drivers/ssb/driver_gpio.c
+++ b/drivers/ssb/driver_gpio.c
@@ -8,6 +8,8 @@
  * Licensed under the GNU/GPL. See COPYING for details.
  */
 
+#include "ssb_private.h"
+
 #include <linux/gpio/driver.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
@@ -15,8 +17,6 @@
 #include <linux/export.h>
 #include <linux/ssb/ssb.h>
 
-#include "ssb_private.h"
-
 
 /**************************************************
  * Shared
diff --git a/drivers/ssb/driver_mipscore.c b/drivers/ssb/driver_mipscore.c
index f87efef42252..1ca2ac5ef2b8 100644
--- a/drivers/ssb/driver_mipscore.c
+++ b/drivers/ssb/driver_mipscore.c
@@ -8,6 +8,8 @@
  * Licensed under the GNU/GPL. See COPYING for details.
  */
 
+#include "ssb_private.h"
+
 #include <linux/ssb/ssb.h>
 
 #include <linux/mtd/physmap.h>
@@ -19,8 +21,6 @@
 #include <linux/bcm47xx_nvram.h>
 #endif
 
-#include "ssb_private.h"
-
 static const char * const part_probes[] = { "bcm47xxpart", NULL };
 
 static struct physmap_flash_data ssb_pflash_data = {
@@ -170,14 +170,15 @@ static void set_irq(struct ssb_device *dev, unsigned int irq)
 		irqflag |= (ipsflag & ~ipsflag_irq_mask[irq]);
 		ssb_write32(mdev, SSB_IPSFLAG, irqflag);
 	}
-	ssb_dbg("set_irq: core 0x%04x, irq %d => %d\n",
+	dev_dbg(dev->dev, "set_irq: core 0x%04x, irq %d => %d\n",
 		dev->id.coreid, oldirq+2, irq+2);
 }
 
 static void print_irq(struct ssb_device *dev, unsigned int irq)
 {
 	static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"};
-	ssb_dbg("core 0x%04x, irq : %s%s %s%s %s%s %s%s %s%s %s%s %s%s\n",
+	dev_dbg(dev->dev,
+		"core 0x%04x, irq : %s%s %s%s %s%s %s%s %s%s %s%s %s%s\n",
 		dev->id.coreid,
 		irq_name[0], irq == 0 ? "*" : " ",
 		irq_name[1], irq == 1 ? "*" : " ",
@@ -229,11 +230,11 @@ static void ssb_mips_flash_detect(struct ssb_mipscore *mcore)
 	switch (bus->chipco.capabilities & SSB_CHIPCO_CAP_FLASHT) {
 	case SSB_CHIPCO_FLASHT_STSER:
 	case SSB_CHIPCO_FLASHT_ATSER:
-		pr_debug("Found serial flash\n");
+		dev_dbg(mcore->dev->dev, "Found serial flash\n");
 		ssb_sflash_init(&bus->chipco);
 		break;
 	case SSB_CHIPCO_FLASHT_PARA:
-		pr_debug("Found parallel flash\n");
+		dev_dbg(mcore->dev->dev, "Found parallel flash\n");
 		pflash->present = true;
 		pflash->window = SSB_FLASH2;
 		pflash->window_size = SSB_FLASH2_SZ;
@@ -299,7 +300,7 @@ void ssb_mipscore_init(struct ssb_mipscore *mcore)
 	if (!mcore->dev)
 		return; /* We don't have a MIPS core */
 
-	ssb_dbg("Initializing MIPS core...\n");
+	dev_dbg(mcore->dev->dev, "Initializing MIPS core...\n");
 
 	bus = mcore->dev->bus;
 	hz = ssb_clockspeed(bus);
@@ -347,7 +348,7 @@ void ssb_mipscore_init(struct ssb_mipscore *mcore)
 			break;
 		}
 	}
-	ssb_dbg("after irq reconfiguration\n");
+	dev_dbg(mcore->dev->dev, "after irq reconfiguration\n");
 	dump_irq(bus);
 
 	ssb_mips_serial_init(mcore);
diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c
index 5fe1c22e289b..ae80b3171523 100644
--- a/drivers/ssb/driver_pcicore.c
+++ b/drivers/ssb/driver_pcicore.c
@@ -8,14 +8,14 @@
  * Licensed under the GNU/GPL. See COPYING for details.
  */
 
+#include "ssb_private.h"
+
 #include <linux/ssb/ssb.h>
 #include <linux/pci.h>
 #include <linux/export.h>
 #include <linux/delay.h>
 #include <linux/ssb/ssb_embedded.h>
 
-#include "ssb_private.h"
-
 static u32 ssb_pcie_read(struct ssb_pcicore *pc, u32 address);
 static void ssb_pcie_write(struct ssb_pcicore *pc, u32 address, u32 data);
 static u16 ssb_pcie_mdio_read(struct ssb_pcicore *pc, u8 device, u8 address);
@@ -263,7 +263,7 @@ int ssb_pcicore_plat_dev_init(struct pci_dev *d)
 		return -ENODEV;
 	}
 
-	ssb_info("PCI: Fixing up device %s\n", pci_name(d));
+	dev_info(&d->dev, "PCI: Fixing up device %s\n", pci_name(d));
 
 	/* Fix up interrupt lines */
 	d->irq = ssb_mips_irq(extpci_core->dev) + 2;
@@ -284,12 +284,12 @@ static void ssb_pcicore_fixup_pcibridge(struct pci_dev *dev)
 	if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0)
 		return;
 
-	ssb_info("PCI: Fixing up bridge %s\n", pci_name(dev));
+	dev_info(&dev->dev, "PCI: Fixing up bridge %s\n", pci_name(dev));
 
 	/* Enable PCI bridge bus mastering and memory space */
 	pci_set_master(dev);
 	if (pcibios_enable_device(dev, ~0) < 0) {
-		ssb_err("PCI: SSB bridge enable failed\n");
+		dev_err(&dev->dev, "PCI: SSB bridge enable failed\n");
 		return;
 	}
 
@@ -298,7 +298,8 @@ static void ssb_pcicore_fixup_pcibridge(struct pci_dev *dev)
 
 	/* Make sure our latency is high enough to handle the devices behind us */
 	lat = 168;
-	ssb_info("PCI: Fixing latency timer of device %s to %u\n",
+	dev_info(&dev->dev,
+		 "PCI: Fixing latency timer of device %s to %u\n",
 		 pci_name(dev), lat);
 	pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
 }
@@ -322,7 +323,7 @@ static void ssb_pcicore_init_hostmode(struct ssb_pcicore *pc)
 		return;
 	extpci_core = pc;
 
-	ssb_dbg("PCIcore in host mode found\n");
+	dev_dbg(pc->dev->dev, "PCIcore in host mode found\n");
 	/* Reset devices on the external PCI bus */
 	val = SSB_PCICORE_CTL_RST_OE;
 	val |= SSB_PCICORE_CTL_CLK_OE;
@@ -337,7 +338,7 @@ static void ssb_pcicore_init_hostmode(struct ssb_pcicore *pc)
 	udelay(1); /* Assertion time demanded by the PCI standard */
 
 	if (pc->dev->bus->has_cardbus_slot) {
-		ssb_dbg("CardBus slot detected\n");
+		dev_dbg(pc->dev->dev, "CardBus slot detected\n");
 		pc->cardbusmode = 1;
 		/* GPIO 1 resets the bridge */
 		ssb_gpio_out(pc->dev->bus, 1, 1);
diff --git a/drivers/ssb/embedded.c b/drivers/ssb/embedded.c
index 55e101115038..c39ddf8988c1 100644
--- a/drivers/ssb/embedded.c
+++ b/drivers/ssb/embedded.c
@@ -9,6 +9,8 @@
  * Licensed under the GNU/GPL. See COPYING for details.
  */
 
+#include "ssb_private.h"
+
 #include <linux/export.h>
 #include <linux/platform_device.h>
 #include <linux/ssb/ssb.h>
@@ -17,8 +19,6 @@
 #include <linux/ssb/ssb_driver_gige.h>
 #include <linux/pci.h>
 
-#include "ssb_private.h"
-
 
 int ssb_watchdog_timer_set(struct ssb_bus *bus, u32 ticks)
 {
@@ -57,8 +57,8 @@ int ssb_watchdog_register(struct ssb_bus *bus)
 					     bus->busnumber, &wdt,
 					     sizeof(wdt));
 	if (IS_ERR(pdev)) {
-		ssb_dbg("can not register watchdog device, err: %li\n",
-			PTR_ERR(pdev));
+		pr_debug("can not register watchdog device, err: %li\n",
+			 PTR_ERR(pdev));
 		return PTR_ERR(pdev);
 	}
 
diff --git a/drivers/ssb/host_soc.c b/drivers/ssb/host_soc.c
index d62992dc08b2..eadaedf466f6 100644
--- a/drivers/ssb/host_soc.c
+++ b/drivers/ssb/host_soc.c
@@ -8,11 +8,11 @@
  * Licensed under the GNU/GPL. See COPYING for details.
  */
 
+#include "ssb_private.h"
+
 #include <linux/bcm47xx_nvram.h>
 #include <linux/ssb/ssb.h>
 
-#include "ssb_private.h"
-
 static u8 ssb_host_soc_read8(struct ssb_device *dev, u16 offset)
 {
 	struct ssb_bus *bus = dev->bus;
diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c
index 116594413f66..9da56d2fdbd3 100644
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -256,7 +256,8 @@ int ssb_devices_thaw(struct ssb_freeze_context *ctx)
 
 		err = sdrv->probe(sdev, &sdev->id);
 		if (err) {
-			ssb_err("Failed to thaw device %s\n",
+			dev_err(sdev->dev,
+				"Failed to thaw device %s\n",
 				dev_name(sdev->dev));
 			result = err;
 		}
@@ -431,9 +432,9 @@ void ssb_bus_unregister(struct ssb_bus *bus)
 
 	err = ssb_gpio_unregister(bus);
 	if (err == -EBUSY)
-		ssb_dbg("Some GPIOs are still in use\n");
+		pr_debug("Some GPIOs are still in use\n");
 	else if (err)
-		ssb_dbg("Can not unregister GPIO driver: %i\n", err);
+		pr_debug("Can not unregister GPIO driver: %i\n", err);
 
 	ssb_buses_lock();
 	ssb_devices_unregister(bus);
@@ -518,7 +519,7 @@ static int ssb_devices_register(struct ssb_bus *bus)
 		sdev->dev = dev;
 		err = device_register(dev);
 		if (err) {
-			ssb_err("Could not register %s\n", dev_name(dev));
+			pr_err("Could not register %s\n", dev_name(dev));
 			/* Set dev to NULL to not unregister
 			 * dev on error unwinding. */
 			sdev->dev = NULL;
@@ -576,9 +577,9 @@ static int ssb_attach_queued_buses(void)
 
 		err = ssb_gpio_init(bus);
 		if (err == -ENOTSUPP)
-			ssb_dbg("GPIO driver not activated\n");
+			pr_debug("GPIO driver not activated\n");
 		else if (err)
-			ssb_dbg("Error registering GPIO driver: %i\n", err);
+			pr_debug("Error registering GPIO driver: %i\n", err);
 
 		ssb_bus_may_powerdown(bus);
 
@@ -707,10 +708,12 @@ int ssb_bus_pcibus_register(struct ssb_bus *bus, struct pci_dev *host_pci)
 
 	err = ssb_bus_register(bus, ssb_pci_get_invariants, 0);
 	if (!err) {
-		ssb_info("Sonics Silicon Backplane found on PCI device %s\n",
+		dev_info(&host_pci->dev,
+			 "Sonics Silicon Backplane found on PCI device %s\n",
 			 dev_name(&host_pci->dev));
 	} else {
-		ssb_err("Failed to register PCI version of SSB with error %d\n",
+		dev_err(&host_pci->dev,
+			"Failed to register PCI version of SSB with error %d\n",
 			err);
 	}
 
@@ -731,7 +734,8 @@ int ssb_bus_pcmciabus_register(struct ssb_bus *bus,
 
 	err = ssb_bus_register(bus, ssb_pcmcia_get_invariants, baseaddr);
 	if (!err) {
-		ssb_info("Sonics Silicon Backplane found on PCMCIA device %s\n",
+		dev_info(&pcmcia_dev->dev,
+			 "Sonics Silicon Backplane found on PCMCIA device %s\n",
 			 pcmcia_dev->devname);
 	}
 
@@ -752,7 +756,8 @@ int ssb_bus_sdiobus_register(struct ssb_bus *bus, struct sdio_func *func,
 
 	err = ssb_bus_register(bus, ssb_sdio_get_invariants, ~0);
 	if (!err) {
-		ssb_info("Sonics Silicon Backplane found on SDIO device %s\n",
+		dev_info(&func->dev,
+			 "Sonics Silicon Backplane found on SDIO device %s\n",
 			 sdio_func_id(func));
 	}
 
@@ -771,8 +776,8 @@ int ssb_bus_host_soc_register(struct ssb_bus *bus, unsigned long baseaddr)
 
 	err = ssb_bus_register(bus, ssb_host_soc_get_invariants, baseaddr);
 	if (!err) {
-		ssb_info("Sonics Silicon Backplane found at address 0x%08lX\n",
-			 baseaddr);
+		pr_info("Sonics Silicon Backplane found at address 0x%08lX\n",
+			baseaddr);
 	}
 
 	return err;
@@ -1057,9 +1062,9 @@ static int ssb_wait_bits(struct ssb_device *dev, u16 reg, u32 bitmask,
 		}
 		udelay(10);
 	}
-	printk(KERN_ERR PFX "Timeout waiting for bitmask %08X on "
-			    "register %04X to %s.\n",
-	       bitmask, reg, (set ? "set" : "clear"));
+	dev_err(dev->dev,
+		"Timeout waiting for bitmask %08X on register %04X to %s\n",
+		bitmask, reg, set ? "set" : "clear");
 
 	return -ETIMEDOUT;
 }
@@ -1169,7 +1174,7 @@ out:
 #endif
 	return err;
 error:
-	ssb_err("Bus powerdown failed\n");
+	pr_err("Bus powerdown failed\n");
 	goto out;
 }
 EXPORT_SYMBOL(ssb_bus_may_powerdown);
@@ -1192,7 +1197,7 @@ int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl)
 
 	return 0;
 error:
-	ssb_err("Bus powerup failed\n");
+	pr_err("Bus powerup failed\n");
 	return err;
 }
 EXPORT_SYMBOL(ssb_bus_powerup);
@@ -1300,19 +1305,19 @@ static int __init ssb_modinit(void)
 
 	err = b43_pci_ssb_bridge_init();
 	if (err) {
-		ssb_err("Broadcom 43xx PCI-SSB-bridge initialization failed\n");
+		pr_err("Broadcom 43xx PCI-SSB-bridge initialization failed\n");
 		/* don't fail SSB init because of this */
 		err = 0;
 	}
 	err = ssb_host_pcmcia_init();
 	if (err) {
-		ssb_err("PCMCIA host initialization failed\n");
+		pr_err("PCMCIA host initialization failed\n");
 		/* don't fail SSB init because of this */
 		err = 0;
 	}
 	err = ssb_gige_init();
 	if (err) {
-		ssb_err("SSB Broadcom Gigabit Ethernet driver initialization failed\n");
+		pr_err("SSB Broadcom Gigabit Ethernet driver initialization failed\n");
 		/* don't fail SSB init because of this */
 		err = 0;
 	}
diff --git a/drivers/ssb/pci.c b/drivers/ssb/pci.c
index 77b551da5728..ad4308529eba 100644
--- a/drivers/ssb/pci.c
+++ b/drivers/ssb/pci.c
@@ -15,14 +15,14 @@
  * Licensed under the GNU/GPL. See COPYING for details.
  */
 
+#include "ssb_private.h"
+
 #include <linux/ssb/ssb.h>
 #include <linux/ssb/ssb_regs.h>
 #include <linux/slab.h>
 #include <linux/pci.h>
 #include <linux/delay.h>
 
-#include "ssb_private.h"
-
 
 /* Define the following to 1 to enable a printk on each coreswitch. */
 #define SSB_VERBOSE_PCICORESWITCH_DEBUG		0
@@ -56,7 +56,7 @@ int ssb_pci_switch_coreidx(struct ssb_bus *bus, u8 coreidx)
 	}
 	return 0;
 error:
-	ssb_err("Failed to switch to core %u\n", coreidx);
+	pr_err("Failed to switch to core %u\n", coreidx);
 	return -ENODEV;
 }
 
@@ -67,9 +67,8 @@ int ssb_pci_switch_core(struct ssb_bus *bus,
 	unsigned long flags;
 
 #if SSB_VERBOSE_PCICORESWITCH_DEBUG
-	ssb_info("Switching to %s core, index %d\n",
-		 ssb_core_name(dev->id.coreid),
-		 dev->core_index);
+	pr_info("Switching to %s core, index %d\n",
+		ssb_core_name(dev->id.coreid), dev->core_index);
 #endif
 
 	spin_lock_irqsave(&bus->bar_lock, flags);
@@ -161,7 +160,7 @@ out:
 	return err;
 
 err_pci:
-	printk(KERN_ERR PFX "Error: ssb_pci_xtal() could not access PCI config space!\n");
+	pr_err("Error: ssb_pci_xtal() could not access PCI config space!\n");
 	err = -EBUSY;
 	goto out;
 }
@@ -286,7 +285,7 @@ static int sprom_do_write(struct ssb_bus *bus, const u16 *sprom)
 	u32 spromctl;
 	u16 size = bus->sprom_size;
 
-	ssb_notice("Writing SPROM. Do NOT turn off the power! Please stand by...\n");
+	pr_notice("Writing SPROM. Do NOT turn off the power! Please stand by...\n");
 	err = pci_read_config_dword(pdev, SSB_SPROMCTL, &spromctl);
 	if (err)
 		goto err_ctlreg;
@@ -294,17 +293,17 @@ static int sprom_do_write(struct ssb_bus *bus, const u16 *sprom)
 	err = pci_write_config_dword(pdev, SSB_SPROMCTL, spromctl);
 	if (err)
 		goto err_ctlreg;
-	ssb_notice("[ 0%%");
+	pr_notice("[ 0%%");
 	msleep(500);
 	for (i = 0; i < size; i++) {
 		if (i == size / 4)
-			ssb_cont("25%%");
+			pr_cont("25%%");
 		else if (i == size / 2)
-			ssb_cont("50%%");
+			pr_cont("50%%");
 		else if (i == (size * 3) / 4)
-			ssb_cont("75%%");
+			pr_cont("75%%");
 		else if (i % 2)
-			ssb_cont(".");
+			pr_cont(".");
 		writew(sprom[i], bus->mmio + bus->sprom_offset + (i * 2));
 		mmiowb();
 		msleep(20);
@@ -317,12 +316,12 @@ static int sprom_do_write(struct ssb_bus *bus, const u16 *sprom)
 	if (err)
 		goto err_ctlreg;
 	msleep(500);
-	ssb_cont("100%% ]\n");
-	ssb_notice("SPROM written\n");
+	pr_cont("100%% ]\n");
+	pr_notice("SPROM written\n");
 
 	return 0;
 err_ctlreg:
-	ssb_err("Could not access SPROM control register.\n");
+	pr_err("Could not access SPROM control register.\n");
 	return err;
 }
 
@@ -816,7 +815,7 @@ static int sprom_extract(struct ssb_bus *bus, struct ssb_sprom *out,
 	memset(out, 0, sizeof(*out));
 
 	out->revision = in[size - 1] & 0x00FF;
-	ssb_dbg("SPROM revision %d detected\n", out->revision);
+	pr_debug("SPROM revision %d detected\n", out->revision);
 	memset(out->et0mac, 0xFF, 6);		/* preset et0 and et1 mac */
 	memset(out->et1mac, 0xFF, 6);
 
@@ -825,7 +824,7 @@ static int sprom_extract(struct ssb_bus *bus, struct ssb_sprom *out,
 		 * number stored in the SPROM.
 		 * Always extract r1. */
 		out->revision = 1;
-		ssb_dbg("SPROM treated as revision %d\n", out->revision);
+		pr_debug("SPROM treated as revision %d\n", out->revision);
 	}
 
 	switch (out->revision) {
@@ -842,8 +841,8 @@ static int sprom_extract(struct ssb_bus *bus, struct ssb_sprom *out,
 		sprom_extract_r8(out, in);
 		break;
 	default:
-		ssb_warn("Unsupported SPROM revision %d detected. Will extract v1\n",
-			 out->revision);
+		pr_warn("Unsupported SPROM revision %d detected. Will extract v1\n",
+			out->revision);
 		out->revision = 1;
 		sprom_extract_r123(out, in);
 	}
@@ -863,7 +862,7 @@ static int ssb_pci_sprom_get(struct ssb_bus *bus,
 	u16 *buf;
 
 	if (!ssb_is_sprom_available(bus)) {
-		ssb_err("No SPROM available!\n");
+		pr_err("No SPROM available!\n");
 		return -ENODEV;
 	}
 	if (bus->chipco.dev) {	/* can be unavailable! */
@@ -882,7 +881,7 @@ static int ssb_pci_sprom_get(struct ssb_bus *bus,
 	} else {
 		bus->sprom_offset = SSB_SPROM_BASE1;
 	}
-	ssb_dbg("SPROM offset is 0x%x\n", bus->sprom_offset);
+	pr_debug("SPROM offset is 0x%x\n", bus->sprom_offset);
 
 	buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL);
 	if (!buf)
@@ -907,16 +906,16 @@ static int ssb_pci_sprom_get(struct ssb_bus *bus,
 			 * available for this device in some other storage */
 			err = ssb_fill_sprom_with_fallback(bus, sprom);
 			if (err) {
-				ssb_warn("WARNING: Using fallback SPROM failed (err %d)\n",
-					 err);
+				pr_warn("WARNING: Using fallback SPROM failed (err %d)\n",
+					err);
 				goto out_free;
 			} else {
-				ssb_dbg("Using SPROM revision %d provided by platform\n",
-					sprom->revision);
+				pr_debug("Using SPROM revision %d provided by platform\n",
+					 sprom->revision);
 				err = 0;
 				goto out_free;
 			}
-			ssb_warn("WARNING: Invalid SPROM CRC (corrupt SPROM)\n");
+			pr_warn("WARNING: Invalid SPROM CRC (corrupt SPROM)\n");
 		}
 	}
 	err = sprom_extract(bus, sprom, buf, bus->sprom_size);
@@ -953,8 +952,7 @@ static int ssb_pci_assert_buspower(struct ssb_bus *bus)
 	if (likely(bus->powered_up))
 		return 0;
 
-	printk(KERN_ERR PFX "FATAL ERROR: Bus powered down "
-	       "while accessing PCI MMIO space\n");
+	pr_err("FATAL ERROR: Bus powered down while accessing PCI MMIO space\n");
 	if (bus->power_warn_count <= 10) {
 		bus->power_warn_count++;
 		dump_stack();
diff --git a/drivers/ssb/pcmcia.c b/drivers/ssb/pcmcia.c
index f03422bbf087..20f63cc88e70 100644
--- a/drivers/ssb/pcmcia.c
+++ b/drivers/ssb/pcmcia.c
@@ -8,6 +8,8 @@
  * Licensed under the GNU/GPL. See COPYING for details.
  */
 
+#include "ssb_private.h"
+
 #include <linux/ssb/ssb.h>
 #include <linux/delay.h>
 #include <linux/io.h>
@@ -18,8 +20,6 @@
 #include <pcmcia/ds.h>
 #include <pcmcia/cisreg.h>
 
-#include "ssb_private.h"
-
 
 /* Define the following to 1 to enable a printk on each coreswitch. */
 #define SSB_VERBOSE_PCMCIACORESWITCH_DEBUG		0
@@ -143,7 +143,7 @@ int ssb_pcmcia_switch_coreidx(struct ssb_bus *bus,
 
 	return 0;
 error:
-	ssb_err("Failed to switch to core %u\n", coreidx);
+	pr_err("Failed to switch to core %u\n", coreidx);
 	return err;
 }
 
@@ -152,9 +152,8 @@ static int ssb_pcmcia_switch_core(struct ssb_bus *bus, struct ssb_device *dev)
 	int err;
 
 #if SSB_VERBOSE_PCMCIACORESWITCH_DEBUG
-	ssb_info("Switching to %s core, index %d\n",
-		 ssb_core_name(dev->id.coreid),
-		 dev->core_index);
+	pr_info("Switching to %s core, index %d\n",
+		ssb_core_name(dev->id.coreid), dev->core_index);
 #endif
 
 	err = ssb_pcmcia_switch_coreidx(bus, dev->core_index);
@@ -190,7 +189,7 @@ int ssb_pcmcia_switch_segment(struct ssb_bus *bus, u8 seg)
 
 	return 0;
 error:
-	ssb_err("Failed to switch pcmcia segment\n");
+	pr_err("Failed to switch pcmcia segment\n");
 	return err;
 }
 
@@ -547,39 +546,39 @@ static int ssb_pcmcia_sprom_write_all(struct ssb_bus *bus, const u16 *sprom)
 	bool failed = 0;
 	size_t size = SSB_PCMCIA_SPROM_SIZE;