Merge tag 'tty-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial updates from Greg KH:
 "Here is the big set of tty and serial driver patches for 5.10-rc1.

  Lots of little things in here, including:

   - tasklet_setup api conversions

   - sysrq support for capital letters

   - vt and vc cleanups and unwinding the mess some more

   - serial driver updates and minor tweaks

   - new device ids

   - rs485 support for some drivers

   - serial binding documentation updates

   - lots of small serial driver changes for reported issues

  All have been in linux-next for a while with no reported issues"

* tag 'tty-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits)
  serial: mcf: add sysrq capability
  serial: fsl_lpuart: add sysrq support when using dma
  fbcon: remove no-op fbcon_set_origin()
  tty/sysrq: Extend the sysrq_key_table to cover capital letters
  serial: max310x: rework RX interrupt handling
  serial: 8250_dw: Fix clk-notifier/port suspend deadlock
  serial: 8250: Skip uninitialized TTY port baud rate update
  serial: 8250: Discard RTS/DTS setting from clock update method
  tty: serial: imx: disable TXDC IRQ in imx_uart_shutdown() to avoid IRQ storm
  serial: 8250_fsl: Fix TX interrupt handling condition
  serial: pl011: Fix lockdep splat when handling magic-sysrq interrupt
  tty: serial: fsl_lpuart: fix lpuart32_poll_get_char
  tty: serial: lpuart: fix lpuart32_write usage
  serial: qcom_geni_serial: To correct QUP Version detection logic
  serial: mvebu-uart: fix unused variable warning
  vt_ioctl: make VT_RESIZEX behave like VT_RESIZE
  serial: mvebu-uart: simplify the return expression of mvebu_uart_probe()
  tty: serial: imx: fix link error with CONFIG_SERIAL_CORE_CONSOLE=n
  tty: hvc: fix link error with CONFIG_SERIAL_CORE_CONSOLE=n
  pch_uart: drop double zeroing
  ...

1 files changed, 25 insertions, 8 deletions

diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index ba503dd04ce2..ee6c7762d355 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -129,13 +129,9 @@ static int stm32_config_rs485(struct uart_port *port,
 		if (rs485conf->flags & SER_RS485_RTS_ON_SEND) {
 			cr3 &= ~USART_CR3_DEP;
 			rs485conf->flags &= ~SER_RS485_RTS_AFTER_SEND;
-			mctrl_gpio_set(stm32_port->gpios,
-					stm32_port->port.mctrl & ~TIOCM_RTS);
 		} else {
 			cr3 |= USART_CR3_DEP;
 			rs485conf->flags |= SER_RS485_RTS_AFTER_SEND;
-			mctrl_gpio_set(stm32_port->gpios,
-					stm32_port->port.mctrl | TIOCM_RTS);
 		}
 
 		writel_relaxed(cr3, port->membase + ofs->cr3);
@@ -541,17 +537,42 @@ static void stm32_disable_ms(struct uart_port *port)
 /* Transmit stop */
 static void stm32_stop_tx(struct uart_port *port)
 {
+	struct stm32_port *stm32_port = to_stm32_port(port);
+	struct serial_rs485 *rs485conf = &port->rs485;
+
 	stm32_tx_interrupt_disable(port);
+
+	if (rs485conf->flags & SER_RS485_ENABLED) {
+		if (rs485conf->flags & SER_RS485_RTS_ON_SEND) {
+			mctrl_gpio_set(stm32_port->gpios,
+					stm32_port->port.mctrl & ~TIOCM_RTS);
+		} else {
+			mctrl_gpio_set(stm32_port->gpios,
+					stm32_port->port.mctrl | TIOCM_RTS);
+		}
+	}
 }
 
 /* There are probably characters waiting to be transmitted. */
 static void stm32_start_tx(struct uart_port *port)
 {
+	struct stm32_port *stm32_port = to_stm32_port(port);
+	struct serial_rs485 *rs485conf = &port->rs485;
 	struct circ_buf *xmit = &port->state->xmit;
 
 	if (uart_circ_empty(xmit))
 		return;
 
+	if (rs485conf->flags & SER_RS485_ENABLED) {
+		if (rs485conf->flags & SER_RS485_RTS_ON_SEND) {
+			mctrl_gpio_set(stm32_port->gpios,
+					stm32_port->port.mctrl | TIOCM_RTS);
+		} else {
+			mctrl_gpio_set(stm32_port->gpios,
+					stm32_port->port.mctrl & ~TIOCM_RTS);
+		}
+	}
+
 	stm32_transmit_chars(port);
 }
 
@@ -851,13 +872,9 @@ static void stm32_set_termios(struct uart_port *port, struct ktermios *termios,
 		if (rs485conf->flags & SER_RS485_RTS_ON_SEND) {
 			cr3 &= ~USART_CR3_DEP;
 			rs485conf->flags &= ~SER_RS485_RTS_AFTER_SEND;
-			mctrl_gpio_set(stm32_port->gpios,
-					stm32_port->port.mctrl & ~TIOCM_RTS);
 		} else {
 			cr3 |= USART_CR3_DEP;
 			rs485conf->flags |= SER_RS485_RTS_AFTER_SEND;
-			mctrl_gpio_set(stm32_port->gpios,
-					stm32_port->port.mctrl | TIOCM_RTS);
 		}
 
 	} else {