Merge tag 'tty-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty / serial updates from Greg KH:
 "Here is a small set of tty and serial driver updates for 6.11-rc1. Not
  much happened this cycle, unlike the previous kernel release which had
  lots of "excitement" in this part of the kernel. Included in here are
  the following changes:

   - dt binding updates for new platforms

   - 8250 driver updates

   - various small serial driver fixes and updates

   - printk/console naming and matching attempt #2 (was reverted for
     6.10-final, should be good to go this time around, acked by the
     relevant maintainers).

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (22 commits)
  Documentation: kernel-parameters: Add DEVNAME:0.0 format for serial ports
  serial: core: Add serial_base_match_and_update_preferred_console()
  printk: Add match_devname_and_update_preferred_console()
  serial: sc16is7xx: hardware reset chip if reset-gpios is defined in DT
  dt-bindings: serial: sc16is7xx: add reset-gpios
  dt-bindings: serial: vt8500-uart: convert to json-schema
  serial: 8250_platform: Explicitly show we initialise ISA ports only once
  tty: add missing MODULE_DESCRIPTION() macros
  dt-bindings: serial: mediatek,uart: add MT7988
  serial: sh-sci: Add support for RZ/V2H(P) SoC
  dt-bindings: serial: Add documentation for Renesas RZ/V2H(P) (R9A09G057) SCIF support
  dt-bindings: serial: renesas,scif: Make 'interrupt-names' property as required
  dt-bindings: serial: renesas,scif: Validate 'interrupts' and 'interrupt-names'
  dt-bindings: serial: renesas,scif: Move ref for serial.yaml at the end
  riscv: dts: starfive: jh7110: Add the core reset and jh7110 compatible for uarts
  serial: 8250_dw: Use reset array API to get resets
  dt-bindings: serial: snps-dw-apb-uart: Add one more reset signal for StarFive JH7110 SoC
  serial: 8250: Extract platform driver
  serial: 8250: Extract RSA bits
  serial: imx: stop casting struct uart_port to struct imx_port
  ...

29 files changed, 697 insertions, 510 deletions

diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c
index 8c964da75f2d..37164289277b 100644
--- a/drivers/tty/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -1660,5 +1660,6 @@ console_initcall(amiserial_console_init);
 
 #endif /* CONFIG_SERIAL_CONSOLE && !MODULE */
 
+MODULE_DESCRIPTION("Serial driver for the amiga builtin port");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:amiga-serial");
diff --git a/drivers/tty/goldfish.c b/drivers/tty/goldfish.c
index 34421ec06a69..c60745f8e621 100644
--- a/drivers/tty/goldfish.c
+++ b/drivers/tty/goldfish.c
@@ -470,4 +470,5 @@ static struct platform_driver goldfish_tty_platform_driver = {
 
 module_platform_driver(goldfish_tty_platform_driver);
 
+MODULE_DESCRIPTION("Goldfish TTY Driver");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index be35f7334ecd..5d37a0984916 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -4634,5 +4634,6 @@ module_init(gsm_init);
 module_exit(gsm_exit);
 
 
+MODULE_DESCRIPTION("GSM 0710 tty multiplexor");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS_LDISC(N_GSM0710);
diff --git a/drivers/tty/n_hdlc.c b/drivers/tty/n_hdlc.c
index 1615f074ab86..4a4dc58b866a 100644
--- a/drivers/tty/n_hdlc.c
+++ b/drivers/tty/n_hdlc.c
@@ -822,6 +822,7 @@ static void __exit n_hdlc_exit(void)
 module_init(n_hdlc_init);
 module_exit(n_hdlc_exit);
 
+MODULE_DESCRIPTION("HDLC line discipline support");
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Paul Fulghum paulkf@microgate.com");
 module_param(maxframe, int, 0);
diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index 6a7b286f6f5a..e5310c65cf52 100644
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -9,7 +9,7 @@
 
 #include <linux/bits.h>
 #include <linux/serial_8250.h>
-#include <linux/serial_reg.h>
+#include <linux/serial_core.h>
 #include <linux/dmaengine.h>
 
 #include "../serial_mctrl_gpio.h"
@@ -93,6 +93,10 @@ struct serial8250_config {
 #define UART_BUG_THRE	BIT(3)	/* UART has buggy THRE reassertion */
 #define UART_BUG_TXRACE	BIT(5)	/* UART Tx fails to set remote DR */
 
+/* Module parameters */
+#define UART_NR	CONFIG_SERIAL_8250_NR_UARTS
+
+extern unsigned int nr_uarts;
 
 #ifdef CONFIG_SERIAL_8250_SHARE_IRQ
 #define SERIAL8250_SHARE_IRQS 1
@@ -100,6 +104,9 @@ struct serial8250_config {
 #define SERIAL8250_SHARE_IRQS 0
 #endif
 
+extern unsigned int share_irqs;
+extern unsigned int skip_txen_test;
+
 #define SERIAL8250_PORT_FLAGS(_base, _irq, _flags)		\
 	{							\
 		.iobase		= _base,			\
@@ -111,6 +118,19 @@ struct serial8250_config {
 
 #define SERIAL8250_PORT(_base, _irq) SERIAL8250_PORT_FLAGS(_base, _irq, 0)
 
+extern struct uart_driver serial8250_reg;
+void serial8250_register_ports(struct uart_driver *drv, struct device *dev);
+
+/* Legacy ISA bus related APIs */
+typedef void (*serial8250_isa_config_fn)(int, struct uart_port *, u32 *);
+extern serial8250_isa_config_fn serial8250_isa_config;
+
+void serial8250_isa_init_ports(void);
+
+extern struct platform_device *serial8250_isa_devs;
+
+extern const struct uart_ops *univ8250_port_base_ops;
+extern struct uart_ops univ8250_port_ops;
 
 static inline int serial_in(struct uart_8250_port *up, int offset)
 {
@@ -200,6 +220,7 @@ static inline bool serial8250_clear_THRI(struct uart_8250_port *up)
 	return true;
 }
 
+struct uart_8250_port *serial8250_setup_port(int index);
 struct uart_8250_port *serial8250_get_port(int line);
 
 void serial8250_rpm_get(struct uart_8250_port *p);
@@ -301,6 +322,12 @@ static inline int serial8250_pnp_init(void) { return 0; }
 static inline void serial8250_pnp_exit(void) { }
 #endif
 
+#ifdef CONFIG_SERIAL_8250_RSA
+void univ8250_rsa_support(struct uart_ops *ops);
+#else
+static inline void univ8250_rsa_support(struct uart_ops *ops) { }
+#endif
+
 #ifdef CONFIG_SERIAL_8250_FINTEK
 int fintek_8250_probe(struct uart_8250_port *uart);
 #else
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index b0adafc44747..29e4b83e0376 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -6,11 +6,9 @@
  *
  *  Copyright (C) 2001 Russell King.
  *
- *  Supports: ISA-compatible 8250/16550 ports
- *	      PNP 8250/16550 ports
+ *  Supports:
  *	      early_serial_setup() ports
  *	      userspace-configurable "phantom" ports
- *	      "serial8250" platform devices
  *	      serial8250_register_8250_port() ports
  */
 
@@ -35,52 +33,13 @@
 #include <linux/string_helpers.h>
 #include <linux/uaccess.h>
 #include <linux/io.h>
-#ifdef CONFIG_SPARC
-#include <linux/sunserialcore.h>
-#endif
 
 #include <asm/irq.h>
 
 #include "8250.h"
 
-/*
- * Configuration:
- *   share_irqs - whether we pass IRQF_SHARED to request_irq().  This option
- *                is unsafe when used on edge-triggered interrupts.
- */
-static unsigned int share_irqs = SERIAL8250_SHARE_IRQS;
-
-static unsigned int nr_uarts = CONFIG_SERIAL_8250_RUNTIME_UARTS;
-
-static struct uart_driver serial8250_reg;
-
-static unsigned int skip_txen_test; /* force skip of txen test at init time */
-
 #define PASS_LIMIT	512
 
-#include <asm/serial.h>
-/*
- * SERIAL_PORT_DFNS tells us about built-in ports that have no
- * standard enumeration mechanism.   Platforms that can find all
- * serial ports via mechanisms like ACPI or PCI need not supply it.
- */
-#ifndef SERIAL_PORT_DFNS
-#define SERIAL_PORT_DFNS
-#endif
-
-static const struct old_serial_port old_serial_port[] = {
-	SERIAL_PORT_DFNS /* defined in asm/serial.h */
-};
-
-#define UART_NR	CONFIG_SERIAL_8250_NR_UARTS
-
-#ifdef CONFIG_SERIAL_8250_RSA
-
-#define PORT_RSA_MAX 4
-static unsigned long probe_rsa[PORT_RSA_MAX];
-static unsigned int probe_rsa_count;
-#endif /* CONFIG_SERIAL_8250_RSA  */
-
 struct irq_info {
 	struct			hlist_node node;
 	int			irq;
@@ -345,45 +304,8 @@ static void univ8250_release_irq(struct uart_8250_port *up)
 		serial_unlink_irq_chain(up);
 }
 
-#ifdef CONFIG_SERIAL_8250_RSA
-static int serial8250_request_rsa_resource(struct uart_8250_port *up)
-{
-	unsigned long start = UART_RSA_BASE << up->port.regshift;
-	unsigned int size = 8 << up->port.regshift;
-	struct uart_port *port = &up->port;
-	int ret = -EINVAL;
-
-	switch (port->iotype) {
-	case UPIO_HUB6:
-	case UPIO_PORT:
-		start += port->iobase;
-		if (request_region(start, size, "serial-rsa"))
-			ret = 0;
-		else
-			ret = -EBUSY;
-		break;
-	}
-
-	return ret;
-}
-
-static void serial8250_release_rsa_resource(struct uart_8250_port *up)
-{
-	unsigned long offset = UART_RSA_BASE << up->port.regshift;
-	unsigned int size = 8 << up->port.regshift;
-	struct uart_port *port = &up->port;
-
-	switch (port->iotype) {
-	case UPIO_HUB6:
-	case UPIO_PORT:
-		release_region(port->iobase + offset, size);
-		break;
-	}
-}
-#endif
-
-static const struct uart_ops *base_ops;
-static struct uart_ops univ8250_port_ops;
+const struct uart_ops *univ8250_port_base_ops = NULL;
+struct uart_ops univ8250_port_ops;
 
 static const struct uart_8250_ops univ8250_driver_ops = {
 	.setup_irq	= univ8250_setup_irq,
@@ -411,85 +333,12 @@ struct uart_8250_port *serial8250_get_port(int line)
 }
 EXPORT_SYMBOL_GPL(serial8250_get_port);
 
-static void (*serial8250_isa_config)(int port, struct uart_port *up,
-	u32 *capabilities);
-
-void serial8250_set_isa_configurator(
-	void (*v)(int port, struct uart_port *up, u32 *capabilities))
-{
-	serial8250_isa_config = v;
-}
-EXPORT_SYMBOL(serial8250_set_isa_configurator);
-
-#ifdef CONFIG_SERIAL_8250_RSA
-
-static void univ8250_config_port(struct uart_port *port, int flags)
-{
-	struct uart_8250_port *up = up_to_u8250p(port);
-
-	up->probe &= ~UART_PROBE_RSA;
-	if (port->type == PORT_RSA) {
-		if (serial8250_request_rsa_resource(up) == 0)
-			up->probe |= UART_PROBE_RSA;
-	} else if (flags & UART_CONFIG_TYPE) {
-		int i;
-
-		for (i = 0; i < probe_rsa_count; i++) {
-			if (probe_rsa[i] == up->port.iobase) {
-				if (serial8250_request_rsa_resource(up) == 0)
-					up->probe |= UART_PROBE_RSA;
-				break;
-			}
-		}
-	}
-
-	base_ops->config_port(port, flags);
-
-	if (port->type != PORT_RSA && up->probe & UART_PROBE_RSA)
-		serial8250_release_rsa_resource(up);
-}
-
-static int univ8250_request_port(struct uart_port *port)
-{
-	struct uart_8250_port *up = up_to_u8250p(port);
-	int ret;
-
-	ret = base_ops->request_port(port);
-	if (ret == 0 && port->type == PORT_RSA) {
-		ret = serial8250_request_rsa_resource(up);
-		if (ret < 0)
-			base_ops->release_port(port);
-	}
-
-	return ret;
-}
-
-static void univ8250_release_port(struct uart_port *port)
-{
-	struct uart_8250_port *up = up_to_u8250p(port);
-
-	if (port->type == PORT_RSA)
-		serial8250_release_rsa_resource(up);
-	base_ops->release_port(port);
-}
-
-static void univ8250_rsa_support(struct uart_ops *ops)
-{
-	ops->config_port  = univ8250_config_port;
-	ops->request_port = univ8250_request_port;
-	ops->release_port = univ8250_release_port;
-}
-
-#else
-#define univ8250_rsa_support(x)		do { } while (0)
-#endif /* CONFIG_SERIAL_8250_RSA */
-
 static inline void serial8250_apply_quirks(struct uart_8250_port *up)
 {
 	up->port.quirks |= skip_txen_test ? UPQ_NO_TXEN_TEST : 0;
 }
 
-static struct uart_8250_port *serial8250_setup_port(int index)
+struct uart_8250_port *serial8250_setup_port(int index)
 {
 	struct uart_8250_port *up;
 
@@ -501,8 +350,8 @@ static struct uart_8250_port *serial8250_setup_port(int index)
 	up->port.port_id = index;
 
 	serial8250_init_port(up);
-	if (!base_ops)
-		base_ops = up->port.ops;
+	if (!univ8250_port_base_ops)
+		univ8250_port_base_ops = up->port.ops;
 	up->port.ops = &univ8250_port_ops;
 
 	timer_setup(&up->timer, serial8250_timeout, 0);
@@ -514,57 +363,7 @@ static struct uart_8250_port *serial8250_setup_port(int index)
 	return up;
 }
 
-static void __init serial8250_isa_init_ports(void)
-{
-	struct uart_8250_port *up;
-	static int first = 1;
-	int i, irqflag = 0;
-
-	if (!first)
-		return;
-	first = 0;
-
-	if (nr_uarts > UART_NR)
-		nr_uarts = UART_NR;
-
-	/*
-	 * Set up initial isa ports based on nr_uart module param, or else
-	 * default to CONFIG_SERIAL_8250_RUNTIME_UARTS. Note that we do not
-	 * need to increase nr_uarts when setting up the initial isa ports.
-	 */
-	for (i = 0; i < nr_uarts; i++)
-		serial8250_setup_port(i);
-
-	/* chain base port ops to support Remote Supervisor Adapter */
-	univ8250_port_ops = *base_ops;
-	univ8250_rsa_support(&univ8250_port_ops);
-
-	if (share_irqs)
-		irqflag = IRQF_SHARED;
-
-	for (i = 0, up = serial8250_ports;
-	     i < ARRAY_SIZE(old_serial_port) && i < nr_uarts;
-	     i++, up++) {
-		struct uart_port *port = &up->port;
-
-		port->iobase   = old_serial_port[i].port;
-		port->irq      = irq_canonicalize(old_serial_port[i].irq);
-		port->irqflags = 0;
-		port->uartclk  = old_serial_port[i].baud_base * 16;
-		port->flags    = old_serial_port[i].flags;
-		port->hub6     = 0;
-		port->membase  = old_serial_port[i].iomem_base;
-		port->iotype   = old_serial_port[i].io_type;
-		port->regshift = old_serial_port[i].iomem_reg_shift;
-
-		port->irqflags |= irqflag;
-		if (serial8250_isa_config != NULL)
-			serial8250_isa_config(i, &up->port, &up->capabilities);
-	}
-}
-
-static void __init
-serial8250_register_ports(struct uart_driver *drv, struct device *dev)
+void __init serial8250_register_ports(struct uart_driver *drv, struct device *dev)
 {
 	int i;
 
@@ -721,7 +520,7 @@ console_initcall(univ8250_console_init);
 #define SERIAL8250_CONSOLE	NULL
 #endif
 
-static struct uart_driver serial8250_reg = {
+struct uart_driver serial8250_reg = {
 	.owner			= THIS_MODULE,
 	.driver_name		= "serial",
 	.dev_name		= "ttyS",
@@ -823,120 +622,6 @@ void serial8250_resume_port(int line)
 EXPORT_SYMBOL(serial8250_resume_port);
 
 /*
- * Register a set of serial devices attached to a platform device.  The
- * list is terminated with a zero flags entry, which means we expect
- * all entries to have at least UPF_BOOT_AUTOCONF set.
- */
-static int serial8250_probe(struct platform_device *dev)
-{
-	struct plat_serial8250_port *p = dev_get_platdata(&dev->dev);
-	struct uart_8250_port uart;
-	int ret, i, irqflag = 0;
-
-	memset(&uart, 0, sizeof(uart));
-
-	if (share_irqs)
-		irqflag = IRQF_SHARED;
-
-	for (i = 0; p && p->flags != 0; p++, i++) {
-		uart.port.iobase	= p->iobase;
-		uart.port.membase	= p->membase;
-		uart.port.irq		= p->irq;
-		uart.port.irqflags	= p->irqflags;
-		uart.port.uartclk	= p->uartclk;
-		uart.port.regshift	= p->regshift;
-		uart.port.iotype	= p->iotype;
-		uart.port.flags		= p->flags;
-		uart.port.mapbase	= p->mapbase;
-		uart.port.mapsize	= p->mapsize;
-		uart.port.hub6		= p->hub6;
-		uart.port.has_sysrq	= p->has_sysrq;
-		uart.port.private_data	= p->private_data;
-		uart.port.type		= p->type;
-		uart.bugs		= p->bugs;
-		uart.port.serial_in	= p->serial_in;
-		uart.port.serial_out	= p->serial_out;
-		uart.dl_read		= p->dl_read;
-		uart.dl_write		= p->dl_write;
-		uart.port.handle_irq	= p->handle_irq;
-		uart.port.handle_break	= p->handle_break;
-		uart.port.set_termios	= p->set_termios;
-		uart.port.set_ldisc	= p->set_ldisc;
-		uart.port.get_mctrl	= p->get_mctrl;
-		uart.port.pm		= p->pm;
-		uart.port.dev		= &dev->dev;
-		uart.port.irqflags	|= irqflag;
-		ret = serial8250_register_8250_port(&uart);
-		if (ret < 0) {
-			dev_err(&dev->dev, "unable to register port at index %d "
-				"(IO%lx MEM%llx IRQ%d): %d\n", i,
-				p->iobase, (unsigned long long)p->mapbase,
-				p->irq, ret);
-		}
-	}
-	return 0;
-}
-
-/*
- * Remove serial ports registered against a platform device.
- */
-static void serial8250_remove(struct platform_device *dev)
-{
-	int i;
-
-	for (i = 0; i < nr_uarts; i++) {
-		struct uart_8250_port *up = &serial8250_ports[i];
-
-		if (up->port.dev == &dev->dev)
-			serial8250_unregister_port(i);
-	}
-}
-
-static int serial8250_suspend(struct platform_device *dev, pm_message_t state)
-{
-	int i;
-
-	for (i = 0; i < UART_NR; i++) {
-		struct uart_8250_port *up = &serial8250_ports[i];
-
-		if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev)
-			uart_suspend_port(&serial8250_reg, &up->port);
-	}
-
-	return 0;
-}
-
-static int serial8250_resume(struct platform_device *dev)
-{
-	int i;
-
-	for (i = 0; i < UART_NR; i++) {
-		struct uart_8250_port *up = &serial8250_ports[i];
-
-		if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev)
-			serial8250_resume_port(i);
-	}
-
-	return 0;
-}
-
-static struct platform_driver serial8250_isa_driver = {
-	.probe		= serial8250_probe,
-	.remove_new	= serial8250_remove,
-	.suspend	= serial8250_suspend,
-	.resume		= serial8250_resume,
-	.driver		= {
-		.name	= "serial8250",
-	},
-};
-
-/*
- * This "device" covers _all_ ISA 8250-compatible serial devices listed
- * in the table in include/asm/serial.h
- */
-static struct platform_device *serial8250_isa_devs;
-
-/*
  * serial8250_register_8250_port and serial8250_unregister_port allows for
  * 16x50 serial ports to be configured at run-time, to support PCMCIA
  * modems and PCI multiport cards.
@@ -1212,134 +897,5 @@ void serial8250_unregister_port(int line)
 }
 EXPORT_SYMBOL(serial8250_unregister_port);
 
-static int __init serial8250_init(void)
-{
-	int ret;
-
-	if (nr_uarts == 0)
-		return -ENODEV;
-
-	serial8250_isa_init_ports();
-
-	pr_info("Serial: 8250/16550 driver, %d ports, IRQ sharing %s\n",
-		nr_uarts, str_enabled_disabled(share_irqs));
-
-#ifdef CONFIG_SPARC
-	ret = sunserial_register_minors(&serial8250_reg, UART_NR);
-#else
-	serial8250_reg.nr = UART_NR;
-	ret = uart_register_driver(&serial8250_reg);
-#endif
-	if (ret)
-		goto out;
-
-	ret = serial8250_pnp_init();
-	if (ret)
-		goto unreg_uart_drv;
-
-	serial8250_isa_devs = platform_device_alloc("serial8250",
-						    PLAT8250_DEV_LEGACY);
-	if (!serial8250_isa_devs) {
-		ret = -ENOMEM;
-		goto unreg_pnp;
-	}
-
-	ret = platform_device_add(serial8250_isa_devs);
-	if (ret)
-		goto put_dev;
-
-	serial8250_register_ports(&serial8250_reg, &serial8250_isa_devs->dev);
-
-	ret = platform_driver_register(&serial8250_isa_driver);
-	if (ret == 0)
-		goto out;
-
-	platform_device_del(serial8250_isa_devs);
-put_dev:
-	platform_device_put(serial8250_isa_devs);
-unreg_pnp:
-	serial8250_pnp_exit();
-unreg_uart_drv:
-#ifdef CONFIG_SPARC
-	sunserial_unregister_minors(&serial8250_reg, UART_NR);
-#else
-	uart_unregister_driver(&serial8250_reg);
-#endif
-out:
-	return ret;
-}
-
-static void __exit serial8250_exit(void)
-{
-	struct platform_device *isa_dev = serial8250_isa_devs;
-
-	/*
-	 * This tells serial8250_unregister_port() not to re-register
-	 * the ports (thereby making serial8250_isa_driver permanently
-	 * in use.)
-	 */
-	serial8250_isa_devs = NULL;
-
-	platform_driver_unregister(&serial8250_isa_driver);
-	platform_device_unregister(isa_dev);
-
-	serial8250_pnp_exit();
-
-#ifdef CONFIG_SPARC
-	sunserial_unregister_minors(&serial8250_reg, UART_NR);
-#else
-	uart_unregister_driver(&serial8250_reg);
-#endif
-}
-
-module_init(serial8250_init);
-module_exit(serial8250_exit);
-
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Generic 8250/16x50 serial driver");
-
-module_param_hw(share_irqs, uint, other, 0644);
-MODULE_PARM_DESC(share_irqs, "Share IRQs with other non-8250/16x50 devices (unsafe)");
-
-module_param(nr_uarts, uint, 0644);
-MODULE_PARM_DESC(nr_uarts, "Maximum number of UARTs supported. (1-" __MODULE_STRING(CONFIG_SERIAL_8250_NR_UARTS) ")");
-
-module_param(skip_txen_test, uint, 0644);
-MODULE_PARM_DESC(skip_txen_test, "Skip checking for the TXEN bug at init time");
-
-#ifdef CONFIG_SERIAL_8250_RSA
-module_param_hw_array(probe_rsa, ulong, ioport, &probe_rsa_count, 0444);
-MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA");
-#endif
-MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR);
-
-#ifdef CONFIG_SERIAL_8250_DEPRECATED_OPTIONS
-#ifndef MODULE
-/* This module was renamed to 8250_core in 3.7.  Keep the old "8250" name
- * working as well for the module options so we don't break people.  We
- * need to keep the names identical and the convenient macros will happily
- * refuse to let us do that by failing the build with redefinition errors
- * of global variables.  So we stick them inside a dummy function to avoid
- * those conflicts.  The options still get parsed, and the redefined
- * MODULE_PARAM_PREFIX lets us keep the "8250." syntax alive.
- *
- * This is hacky.  I'm sorry.
- */
-static void __used s8250_options(void)
-{
-#undef MODULE_PARAM_PREFIX
-#define MODULE_PARAM_PREFIX "8250_core."
-
-	module_param_cb(share_irqs, &param_ops_uint, &share_irqs, 0644);
-	module_param_cb(nr_uarts, &param_ops_uint, &nr_uarts, 0644);
-	module_param_cb(skip_txen_test, &param_ops_uint, &skip_txen_test, 0644);
-#ifdef CONFIG_SERIAL_8250_RSA
-	__module_param_call(MODULE_PARAM_PREFIX, probe_rsa,
-		&param_array_ops, .arr = &__param_arr_probe_rsa,
-		0444, -1, 0);
-#endif
-}
-#else
-MODULE_ALIAS("8250_core");
-#endif
-#endif
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index fb809e32c6ae..ab9e7f204260 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -616,7 +616,7 @@ static int dw8250_probe(struct platform_device *pdev)
 	if (IS_ERR(data->pclk))
 		return PTR_ERR(data->pclk);
 
-	data->rst = devm_reset_control_get_optional_exclusive(dev, NULL);
+	data->rst = devm_reset_control_array_get_optional_exclusive(dev);
 	if (IS_ERR(data->rst))
 		return PTR_ERR(data->rst);
 
diff --git a/drivers/tty/serial/8250/8250_parisc.c b/drivers/tty/serial/8250/8250_parisc.c
index 948d0a1c6ae8..4ba05a98791c 100644
--- a/drivers/tty/serial/8250/8250_parisc.c
+++ b/drivers/tty/serial/8250/8250_parisc.c
@@ -127,4 +127,5 @@ static int __init probe_serial_gsc(void)
 
 module_init(probe_serial_gsc);
 
+MODULE_DESCRIPTION("Serial Device Initialisation for Lasi/Asp/Wax/Dino");
 MODULE_LICENSE("GPL");
diff --git a/drivers/tty/serial/8250/8250_pcilib.c b/drivers/tty/serial/8250/8250_pcilib.c
index d234e9194feb..ea906d721b2c 100644
--- a/drivers/tty/serial/8250/8250_pcilib.c
+++ b/drivers/tty/serial/8250/8250_pcilib.c
@@ -37,4 +37,5 @@ int serial8250_pci_setup_port(struct pci_dev *dev, struct uart_8250_port *port,
 	return 0;
 }
 EXPORT_SYMBOL_NS_GPL(serial8250_pci_setup_port, SERIAL_8250_PCI);
+MODULE_DESCRIPTION("8250 PCI library");
 MODULE_LICENSE("GPL");
diff --git a/drivers/tty/serial/8250/8250_platform.c b/drivers/tty/serial/8250/8250_platform.c
new file mode 100644
index 000000000000..d5c8d851348d
--- /dev/null
+++ b/drivers/tty/serial/8250/8250_platform.c
@@ -0,0 +1,337 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *  Universal/legacy platform driver for 8250/16550-type serial ports
+ *
+ *  Supports: ISA-compatible 8250/16550 ports
+ *	      PNP 8250/16550 ports
+ *	      "serial8250" platform devices
+ */
+#include <linux/array_size.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/once.h>
+#include <linux/platform_device.h>
+
+#include <linux/serial_8250.h>
+
+#ifdef CONFIG_SPARC
+#include <linux/sunserialcore.h>
+#endif
+
+#include "8250.h"
+
+/*
+ * Configuration:
+ *    share_irqs   Whether we pass IRQF_SHARED to request_irq().
+ *                 This option is unsafe when used on edge-triggered interrupts.
+ * skip_txen_test  Force skip of txen test at init time.
+ */
+unsigned int share_irqs = SERIAL8250_SHARE_IRQS;
+unsigned int skip_txen_test;
+
+unsigned int nr_uarts = CONFIG_SERIAL_8250_RUNTIME_UARTS;
+
+#include <asm/serial.h>
+
+/*
+ * SERIAL_PORT_DFNS tells us about built-in ports that have no
+ * standard enumeration mechanism. Platforms that can find all
+ * serial ports via mechanisms like ACPI or PCI need not supply it.
+ */
+#ifndef SERIAL_PORT_DFNS
+#define SERIAL_PORT_DFNS
+#endif
+
+static const struct old_serial_port old_serial_port[] = {
+	SERIAL_PORT_DFNS /* defined in asm/serial.h */
+};
+
+serial8250_isa_config_fn serial8250_isa_config;
+void serial8250_set_isa_configurator(serial8250_isa_config_fn v)
+{
+	serial8250_isa_config = v;
+}
+EXPORT_SYMBOL(serial8250_set_isa_configurator);
+
+static void __init __serial8250_isa_init_ports(void)
+{
+	int i, irqflag = 0;
+
+	if (nr_uarts > UART_NR)
+		nr_uarts = UART_NR;
+
+	/*
+	 * Set up initial isa ports based on nr_uart module param, or else
+	 * default to CONFIG_SERIAL_8250_RUNTIME_UARTS. Note that we do not
+	 * need to increase nr_uarts when setting up the initial isa ports.
+	 */
+	for (i = 0; i < nr_uarts; i++)
+		serial8250_setup_port(i);
+
+	/* chain base port ops to support Remote Supervisor Adapter */
+	univ8250_port_ops = *univ8250_port_base_ops;
+	univ8250_rsa_support(&univ8250_port_ops);
+
+	if (share_irqs)
+		irqflag = IRQF_SHARED;
+
+	for (i = 0; i < ARRAY_SIZE(old_serial_port) && i < nr_uarts; i++) {
+		struct uart_8250_port *up = serial8250_get_port(i);
+		struct uart_port *port = &up->port;
+
+		port->iobase   = old_serial_port[i].port;
+		port->irq      = irq_canonicalize(old_serial_port[i].irq);
+		port->irqflags = 0;
+		port->uartclk  = old_serial_port[i].baud_base * 16;
+		port->flags    = old_serial_port[i].flags;
+		port->hub6     = 0;
+		port->membase  = old_serial_port[i].iomem_base;
+		port->iotype   = old_serial_port[i].io_type;
+		port->regshift = old_serial_port[i].iomem_reg_shift;
+
+		port->irqflags |= irqflag;
+		if (serial8250_isa_config != NULL)