Merge tag 'usb-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt changes for 6.8-rc1.
  Included in here are the following:

   - Thunderbolt subsystem and driver updates for USB 4 hardware and
     issues reported by real devices

   - xhci driver updates

   - dwc3 driver updates

   - uvc_video gadget driver updates

   - typec driver updates

   - gadget string functions cleaned up

   - other small changes

  All of these have been in the linux-next tree for a while with no
  reported issues"

* tag 'usb-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (169 commits)
  usb: typec: tipd: fix use of device-specific init function
  usb: typec: tipd: Separate reset for TPS6598x
  usb: mon: Fix atomicity violation in mon_bin_vma_fault
  usb: gadget: uvc: Remove nested locking
  usb: gadget: uvc: Fix use are free during STREAMOFF
  usb: typec: class: fix typec_altmode_put_partner to put plugs
  dt-bindings: usb: dwc3: Limit num-hc-interrupters definition
  dt-bindings: usb: xhci: Add num-hc-interrupters definition
  xhci: add support to allocate several interrupters
  USB: core: Use device_driver directly in struct usb_driver and usb_device_driver
  arm64: dts: mediatek: mt8195: Add 'rx-fifo-depth' for cherry
  usb: xhci-mtk: fix a short packet issue of gen1 isoc-in transfer
  dt-bindings: usb: mtk-xhci: add a property for Gen1 isoc-in transfer issue
  arm64: dts: qcom: msm8996: Remove PNoC clock from MSS
  arm64: dts: qcom: msm8996: Remove AGGRE2 clock from SLPI
  arm64: dts: qcom: msm8998: Remove AGGRE2 clock from SLPI
  arm64: dts: qcom: msm8939: Drop RPM bus clocks
  arm64: dts: qcom: sdm630: Drop RPM bus clocks
  arm64: dts: qcom: qcs404: Drop RPM bus clocks
  arm64: dts: qcom: msm8996: Drop RPM bus clocks
  ...

1 files changed, 44 insertions, 4 deletions

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 87480a6e6d93..ffd7c99e24a3 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -47,12 +47,24 @@
 #define USB_VENDOR_TEXAS_INSTRUMENTS		0x0451
 #define USB_PRODUCT_TUSB8041_USB3		0x8140
 #define USB_PRODUCT_TUSB8041_USB2		0x8142
-#define HUB_QUIRK_CHECK_PORT_AUTOSUSPEND	0x01
-#define HUB_QUIRK_DISABLE_AUTOSUSPEND		0x02
+#define USB_VENDOR_MICROCHIP			0x0424
+#define USB_PRODUCT_USB4913			0x4913
+#define USB_PRODUCT_USB4914			0x4914
+#define USB_PRODUCT_USB4915			0x4915
+#define HUB_QUIRK_CHECK_PORT_AUTOSUSPEND	BIT(0)
+#define HUB_QUIRK_DISABLE_AUTOSUSPEND		BIT(1)
+#define HUB_QUIRK_REDUCE_FRAME_INTR_BINTERVAL	BIT(2)
 
 #define USB_TP_TRANSMISSION_DELAY	40	/* ns */
 #define USB_TP_TRANSMISSION_DELAY_MAX	65535	/* ns */
 #define USB_PING_RESPONSE_TIME		400	/* ns */
+#define USB_REDUCE_FRAME_INTR_BINTERVAL	9
+
+/*
+ * The SET_ADDRESS request timeout will be 500 ms when
+ * USB_QUIRK_SHORT_SET_ADDRESS_REQ_TIMEOUT quirk flag is set.
+ */
+#define USB_SHORT_SET_ADDRESS_REQ_TIMEOUT	500  /* ms */
 
 /* Protect struct usb_device->state and ->children members
  * Note: Both are also protected by ->dev.sem, except that ->state can
@@ -1904,6 +1916,14 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id)
 		usb_autopm_get_interface_no_resume(intf);
 	}
 
+	if ((id->driver_info & HUB_QUIRK_REDUCE_FRAME_INTR_BINTERVAL) &&
+	    desc->endpoint[0].desc.bInterval > USB_REDUCE_FRAME_INTR_BINTERVAL) {
+		desc->endpoint[0].desc.bInterval =
+			USB_REDUCE_FRAME_INTR_BINTERVAL;
+		/* Tell the HCD about the interrupt ep's new bInterval */
+		usb_set_interface(hdev, 0, 0);
+	}
+
 	if (hub_configure(hub, &desc->endpoint[0].desc) >= 0) {
 		onboard_hub_create_pdevs(hdev, &hub->onboard_hub_devs);
 
@@ -4626,7 +4646,12 @@ EXPORT_SYMBOL_GPL(usb_ep0_reinit);
 static int hub_set_address(struct usb_device *udev, int devnum)
 {
 	int retval;
+	unsigned int timeout_ms = USB_CTRL_SET_TIMEOUT;
 	struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+	struct usb_hub *hub = usb_hub_to_struct_hub(udev->parent);
+
+	if (hub->hdev->quirks & USB_QUIRK_SHORT_SET_ADDRESS_REQ_TIMEOUT)
+		timeout_ms = USB_SHORT_SET_ADDRESS_REQ_TIMEOUT;
 
 	/*
 	 * The host controller will choose the device address,
@@ -4639,11 +4664,11 @@ static int hub_set_address(struct usb_device *udev, int devnum)
 	if (udev->state != USB_STATE_DEFAULT)
 		return -EINVAL;
 	if (hcd->driver->address_device)
-		retval = hcd->driver->address_device(hcd, udev);
+		retval = hcd->driver->address_device(hcd, udev, timeout_ms);
 	else
 		retval = usb_control_msg(udev, usb_sndaddr0pipe(),
 				USB_REQ_SET_ADDRESS, 0, devnum, 0,
-				NULL, 0, USB_CTRL_SET_TIMEOUT);
+				NULL, 0, timeout_ms);
 	if (retval == 0) {
 		update_devnum(udev, devnum);
 		/* Device now using proper address. */
@@ -5895,6 +5920,21 @@ static const struct usb_device_id hub_id_table[] = {
       .idVendor = USB_VENDOR_TEXAS_INSTRUMENTS,
       .idProduct = USB_PRODUCT_TUSB8041_USB3,
       .driver_info = HUB_QUIRK_DISABLE_AUTOSUSPEND},
+	{ .match_flags = USB_DEVICE_ID_MATCH_VENDOR
+			| USB_DEVICE_ID_MATCH_PRODUCT,
+	  .idVendor = USB_VENDOR_MICROCHIP,
+	  .idProduct = USB_PRODUCT_USB4913,
+	  .driver_info = HUB_QUIRK_REDUCE_FRAME_INTR_BINTERVAL},
+	{ .match_flags = USB_DEVICE_ID_MATCH_VENDOR
+			| USB_DEVICE_ID_MATCH_PRODUCT,
+	  .idVendor = USB_VENDOR_MICROCHIP,
+	  .idProduct = USB_PRODUCT_USB4914,
+	  .driver_info = HUB_QUIRK_REDUCE_FRAME_INTR_BINTERVAL},
+	{ .match_flags = USB_DEVICE_ID_MATCH_VENDOR
+			| USB_DEVICE_ID_MATCH_PRODUCT,
+	  .idVendor = USB_VENDOR_MICROCHIP,
+	  .idProduct = USB_PRODUCT_USB4915,
+	  .driver_info = HUB_QUIRK_REDUCE_FRAME_INTR_BINTERVAL},
     { .match_flags = USB_DEVICE_ID_MATCH_DEV_CLASS,
       .bDeviceClass = USB_CLASS_HUB},
     { .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS,