Merge tag 'usb-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: changes for v4.15 merge window

Not much going on this time around. With only 51 non-merge commits,
this was one of the smallest pull requests from the Gadget tree.

Most of the changes are in the mtu3 driver which added support for
36-bit DMA, support for USB 3.1 and support for dual-role (along with
some non-critical fixes).

The dwc2 driver got a few improvements to how we handle gadget state
tracking and also added support for STM32F7xx devices.

Other than that, we just some minor non-critical fixes and
improvements all over the place.

1 files changed, 45 insertions, 16 deletions

diff --git a/drivers/usb/mtu3/mtu3_dr.c b/drivers/usb/mtu3/mtu3_dr.c
index 560256115b23..ec442cd5a1ad 100644
--- a/drivers/usb/mtu3/mtu3_dr.c
+++ b/drivers/usb/mtu3/mtu3_dr.c
@@ -261,21 +261,22 @@ static void extcon_register_dwork(struct work_struct *work)
  * depending on user input.
  * This is useful in special cases, such as uses TYPE-A receptacle but also
  * wants to support dual-role mode.
- * It generates cable state changes by pulling up/down IDPIN and
- * notifies driver to switch mode by "extcon-usb-gpio".
- * NOTE: when use MICRO receptacle, should not enable this interface.
  */
 static void ssusb_mode_manual_switch(struct ssusb_mtk *ssusb, int to_host)
 {
 	struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
 
-	if (to_host)
-		pinctrl_select_state(otg_sx->id_pinctrl, otg_sx->id_ground);
-	else
-		pinctrl_select_state(otg_sx->id_pinctrl, otg_sx->id_float);
+	if (to_host) {
+		ssusb_set_force_mode(ssusb, MTU3_DR_FORCE_HOST);
+		ssusb_set_mailbox(otg_sx, MTU3_VBUS_OFF);
+		ssusb_set_mailbox(otg_sx, MTU3_ID_GROUND);
+	} else {
+		ssusb_set_force_mode(ssusb, MTU3_DR_FORCE_DEVICE);
+		ssusb_set_mailbox(otg_sx, MTU3_ID_FLOAT);
+		ssusb_set_mailbox(otg_sx, MTU3_VBUS_VALID);
+	}
 }
 
-
 static int ssusb_mode_show(struct seq_file *sf, void *unused)
 {
 	struct ssusb_mtk *ssusb = sf->private;
@@ -388,17 +389,45 @@ static void ssusb_debugfs_exit(struct ssusb_mtk *ssusb)
 	debugfs_remove_recursive(ssusb->dbgfs_root);
 }
 
+void ssusb_set_force_mode(struct ssusb_mtk *ssusb,
+			  enum mtu3_dr_force_mode mode)
+{
+	u32 value;
+
+	value = mtu3_readl(ssusb->ippc_base, SSUSB_U2_CTRL(0));
+	switch (mode) {
+	case MTU3_DR_FORCE_DEVICE:
+		value |= SSUSB_U2_PORT_FORCE_IDDIG | SSUSB_U2_PORT_RG_IDDIG;
+		break;
+	case MTU3_DR_FORCE_HOST:
+		value |= SSUSB_U2_PORT_FORCE_IDDIG;
+		value &= ~SSUSB_U2_PORT_RG_IDDIG;
+		break;
+	case MTU3_DR_FORCE_NONE:
+		value &= ~(SSUSB_U2_PORT_FORCE_IDDIG | SSUSB_U2_PORT_RG_IDDIG);
+		break;
+	default:
+		return;
+	}
+	mtu3_writel(ssusb->ippc_base, SSUSB_U2_CTRL(0), value);
+}
+
 int ssusb_otg_switch_init(struct ssusb_mtk *ssusb)
 {
 	struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
 
-	INIT_DELAYED_WORK(&otg_sx->extcon_reg_dwork, extcon_register_dwork);
-
-	if (otg_sx->manual_drd_enabled)
+	if (otg_sx->manual_drd_enabled) {
 		ssusb_debugfs_init(ssusb);
-
-	/* It is enough to delay 1s for waiting for host initialization */
-	schedule_delayed_work(&otg_sx->extcon_reg_dwork, HZ);
+	} else {
+		INIT_DELAYED_WORK(&otg_sx->extcon_reg_dwork,
+				  extcon_register_dwork);
+
+		/*
+		 * It is enough to delay 1s for waiting for
+		 * host initialization
+		 */
+		schedule_delayed_work(&otg_sx->extcon_reg_dwork, HZ);
+	}
 
 	return 0;
 }
@@ -407,8 +436,8 @@ void ssusb_otg_switch_exit(struct ssusb_mtk *ssusb)
 {
 	struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
 
-	cancel_delayed_work(&otg_sx->extcon_reg_dwork);
-
 	if (otg_sx->manual_drd_enabled)
 		ssusb_debugfs_exit(ssusb);
+	else
+		cancel_delayed_work(&otg_sx->extcon_reg_dwork);
 }