Merge tag 'char-misc-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc updates from Greg KH:
 "Here is the big set of char/misc driver patches for 4.17-rc1.

  There are a lot of little things in here, nothing huge, but all
  important to the different hardware types involved:

   -  thunderbolt driver updates

   -  parport updates (people still care...)

   -  nvmem driver updates

   -  mei updates (as always)

   -  hwtracing driver updates

   -  hyperv driver updates

   -  extcon driver updates

   -  ... and a handful of even smaller driver subsystem and individual
      driver updates

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (149 commits)
  hwtracing: Add HW tracing support menu
  intel_th: Add ACPI glue layer
  intel_th: Allow forcing host mode through drvdata
  intel_th: Pick up irq number from resources
  intel_th: Don't touch switch routing in host mode
  intel_th: Use correct method of finding hub
  intel_th: Add SPDX GPL-2.0 header to replace GPLv2 boilerplate
  stm class: Make dummy's master/channel ranges configurable
  stm class: Add SPDX GPL-2.0 header to replace GPLv2 boilerplate
  MAINTAINERS: Bestow upon myself the care for drivers/hwtracing
  hv: add SPDX license id to Kconfig
  hv: add SPDX license to trace
  Drivers: hv: vmbus: do not mark HV_PCIE as perf_device
  Drivers: hv: vmbus: respect what we get from hv_get_synint_state()
  /dev/mem: Avoid overwriting "err" in read_mem()
  eeprom: at24: use SPDX identifier instead of GPL boiler-plate
  eeprom: at24: simplify the i2c functionality checking
  eeprom: at24: fix a line break
  eeprom: at24: tweak newlines
  eeprom: at24: refactor at24_probe()
  ...

106 files changed, 2690 insertions, 1002 deletions

diff --git a/drivers/Kconfig b/drivers/Kconfig
index 879dc0604cba..95b9ccc08165 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -199,9 +199,7 @@ source "drivers/dax/Kconfig"
 
 source "drivers/nvmem/Kconfig"
 
-source "drivers/hwtracing/stm/Kconfig"
-
-source "drivers/hwtracing/intel_th/Kconfig"
+source "drivers/hwtracing/Kconfig"
 
 source "drivers/fpga/Kconfig"
 
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 40947a796666..e538061eadcb 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -236,7 +236,7 @@ source "drivers/char/hw_random/Kconfig"
 
 config NVRAM
 	tristate "/dev/nvram support"
-	depends on ATARI || X86 || (ARM && RTC_DRV_CMOS) || GENERIC_NVRAM
+	depends on ATARI || X86 || GENERIC_NVRAM
 	---help---
 	  If you say Y here and create a character special file /dev/nvram
 	  with major number 10 and minor number 144 using mknod ("man mknod"),
diff --git a/drivers/char/mem.c b/drivers/char/mem.c
index 052011bcf100..ffeb60d3434c 100644
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -137,7 +137,7 @@ static ssize_t read_mem(struct file *file, char __user *buf,
 
 	while (count > 0) {
 		unsigned long remaining;
-		int allowed;
+		int allowed, probe;
 
 		sz = size_inside_page(p, count);
 
@@ -160,9 +160,9 @@ static ssize_t read_mem(struct file *file, char __user *buf,
 			if (!ptr)
 				goto failed;
 
-			err = probe_kernel_read(bounce, ptr, sz);
+			probe = probe_kernel_read(bounce, ptr, sz);
 			unxlate_dev_mem_ptr(p, ptr);
-			if (err)
+			if (probe)
 				goto failed;
 
 			remaining = copy_to_user(buf, bounce, sz);
diff --git a/drivers/char/xillybus/xillybus_pcie.c b/drivers/char/xillybus/xillybus_pcie.c
index dff2d1538164..05e5324f60bd 100644
--- a/drivers/char/xillybus/xillybus_pcie.c
+++ b/drivers/char/xillybus/xillybus_pcie.c
@@ -24,7 +24,6 @@ MODULE_LICENSE("GPL v2");
 
 #define PCI_DEVICE_ID_XILLYBUS		0xebeb
 
-#define PCI_VENDOR_ID_ALTERA		0x1172
 #define PCI_VENDOR_ID_ACTEL		0x11aa
 #define PCI_VENDOR_ID_LATTICE		0x1204
 
diff --git a/drivers/extcon/extcon-gpio.c b/drivers/extcon/extcon-gpio.c
index ab770adcca7e..13ba3a6e81d5 100644
--- a/drivers/extcon/extcon-gpio.c
+++ b/drivers/extcon/extcon-gpio.c
@@ -18,8 +18,6 @@
  */
 
 #include <linux/extcon-provider.h>
-#include <linux/extcon/extcon-gpio.h>
-#include <linux/gpio.h>
 #include <linux/gpio/consumer.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
@@ -29,14 +27,30 @@
 #include <linux/slab.h>
 #include <linux/workqueue.h>
 
+/**
+ * struct gpio_extcon_data - A simple GPIO-controlled extcon device state container.
+ * @edev:		Extcon device.
+ * @irq:		Interrupt line for the external connector.
+ * @work:		Work fired by the interrupt.
+ * @debounce_jiffies:	Number of jiffies to wait for the GPIO to stabilize, from the debounce
+ *			value.
+ * @gpiod:		GPIO descriptor for this external connector.
+ * @extcon_id:		The unique id of specific external connector.
+ * @debounce:		Debounce time for GPIO IRQ in ms.
+ * @irq_flags:		IRQ Flags (e.g., IRQF_TRIGGER_LOW).
+ * @check_on_resume:	Boolean describing whether to check the state of gpio
+ *			while resuming from sleep.
+ */
 struct gpio_extcon_data {
 	struct extcon_dev *edev;
 	int irq;
 	struct delayed_work work;
 	unsigned long debounce_jiffies;
-
-	struct gpio_desc *id_gpiod;
-	struct gpio_extcon_pdata *pdata;
+	struct gpio_desc *gpiod;
+	unsigned int extcon_id;
+	unsigned long debounce;
+	unsigned long irq_flags;
+	bool check_on_resume;
 };
 
 static void gpio_extcon_work(struct work_struct *work)
@@ -46,11 +60,8 @@ static void gpio_extcon_work(struct work_struct *work)
 		container_of(to_delayed_work(work), struct gpio_extcon_data,
 			     work);
 
-	state = gpiod_get_value_cansleep(data->id_gpiod);
-	if (data->pdata->gpio_active_low)
-		state = !state;
-
-	extcon_set_state_sync(data->edev, data->pdata->extcon_id, state);
+	state = gpiod_get_value_cansleep(data->gpiod);
+	extcon_set_state_sync(data->edev, data->extcon_id, state);
 }
 
 static irqreturn_t gpio_irq_handler(int irq, void *dev_id)
@@ -62,65 +73,41 @@ static irqreturn_t gpio_irq_handler(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static int gpio_extcon_init(struct device *dev, struct gpio_extcon_data *data)
-{
-	struct gpio_extcon_pdata *pdata = data->pdata;
-	int ret;
-
-	ret = devm_gpio_request_one(dev, pdata->gpio, GPIOF_DIR_IN,
-				dev_name(dev));
-	if (ret < 0)
-		return ret;
-
-	data->id_gpiod = gpio_to_desc(pdata->gpio);
-	if (!data->id_gpiod)
-		return -EINVAL;
-
-	if (pdata->debounce) {
-		ret = gpiod_set_debounce(data->id_gpiod,
-					pdata->debounce * 1000);
-		if (ret < 0)
-			data->debounce_jiffies =
-				msecs_to_jiffies(pdata->debounce);
-	}
-
-	data->irq = gpiod_to_irq(data->id_gpiod);
-	if (data->irq < 0)
-		return data->irq;
-
-	return 0;
-}
-
 static int gpio_extcon_probe(struct platform_device *pdev)
 {
-	struct gpio_extcon_pdata *pdata = dev_get_platdata(&pdev->dev);
 	struct gpio_extcon_data *data;
+	struct device *dev = &pdev->dev;
 	int ret;
 
-	if (!pdata)
-		return -EBUSY;
-	if (!pdata->irq_flags || pdata->extcon_id > EXTCON_NONE)
-		return -EINVAL;
-
-	data = devm_kzalloc(&pdev->dev, sizeof(struct gpio_extcon_data),
-				   GFP_KERNEL);
+	data = devm_kzalloc(dev, sizeof(struct gpio_extcon_data), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
-	data->pdata = pdata;
 
-	/* Initialize the gpio */
-	ret = gpio_extcon_init(&pdev->dev, data);
-	if (ret < 0)
-		return ret;
+	/*
+	 * FIXME: extcon_id represents the unique identifier of external
+	 * connectors such as EXTCON_USB, EXTCON_DISP_HDMI and so on. extcon_id
+	 * is necessary to register the extcon device. But, it's not yet
+	 * developed to get the extcon id from device-tree or others.
+	 * On later, it have to be solved.
+	 */
+	if (!data->irq_flags || dat