Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

Conflicts:

drivers/net/ethernet/faraday/ftgmac100.c
  4186c8d9e6af ("net: ftgmac100: Ensure tx descriptor updates are visible")
  e24a6c874601 ("net: ftgmac100: Get link speed and duplex for NC-SI")
https://lore.kernel.org/0b851ec5-f91d-4dd3-99da-e81b98c9ed28@kernel.org

net/ipv4/tcp.c
  bac76cf89816 ("tcp: fix forever orphan socket caused by tcp_abort")
  edefba66d929 ("tcp: rstreason: introduce SK_RST_REASON_TCP_STATE for active reset")
https://lore.kernel.org/20240828112207.5c199d41@canb.auug.org.au

No adjacent changes.

Link: https://patch.msgid.link/20240829130829.39148-1-pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

108 files changed, 1147 insertions, 370 deletions

diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
index c11cbe5b6eaa..674b9db7a1ef 100644
--- a/drivers/acpi/video_detect.c
+++ b/drivers/acpi/video_detect.c
@@ -54,6 +54,8 @@ static void acpi_video_parse_cmdline(void)
 		acpi_backlight_cmdline = acpi_backlight_nvidia_wmi_ec;
 	if (!strcmp("apple_gmux", acpi_video_backlight_string))
 		acpi_backlight_cmdline = acpi_backlight_apple_gmux;
+	if (!strcmp("dell_uart", acpi_video_backlight_string))
+		acpi_backlight_cmdline = acpi_backlight_dell_uart;
 	if (!strcmp("none", acpi_video_backlight_string))
 		acpi_backlight_cmdline = acpi_backlight_none;
 }
@@ -822,6 +824,21 @@ static const struct dmi_system_id video_detect_dmi_table[] = {
 	},
 
 	/*
+	 * Dell AIO (All in Ones) which advertise an UART attached backlight
+	 * controller board in their ACPI tables (and may even have one), but
+	 * which need native backlight control nevertheless.
+	 */
+	{
+	 /* https://bugzilla.redhat.com/show_bug.cgi?id=2303936 */
+	 .callback = video_detect_force_native,
+	 /* Dell OptiPlex 7760 AIO */
+	 .matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+		DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 7760 AIO"),
+		},
+	},
+
+	/*
 	 * Models which have nvidia-ec-wmi support, but should not use it.
 	 * Note this indicates a likely firmware bug on these models and should
 	 * be revisited if/when Linux gets support for dynamic mux mode.
@@ -918,6 +935,7 @@ enum acpi_backlight_type __acpi_video_get_backlight_type(bool native, bool *auto
 	static DEFINE_MUTEX(init_mutex);
 	static bool nvidia_wmi_ec_present;
 	static bool apple_gmux_present;
+	static bool dell_uart_present;
 	static bool native_available;
 	static bool init_done;
 	static long video_caps;
@@ -932,6 +950,7 @@ enum acpi_backlight_type __acpi_video_get_backlight_type(bool native, bool *auto
 				    &video_caps, NULL);
 		nvidia_wmi_ec_present = nvidia_wmi_ec_supported();
 		apple_gmux_present = apple_gmux_detect(NULL, NULL);
+		dell_uart_present = acpi_dev_present("DELL0501", NULL, -1);
 		init_done = true;
 	}
 	if (native)
@@ -962,6 +981,9 @@ enum acpi_backlight_type __acpi_video_get_backlight_type(bool native, bool *auto
 	if (apple_gmux_present)
 		return acpi_backlight_apple_gmux;
 
+	if (dell_uart_present)
+		return acpi_backlight_dell_uart;
+
 	/* Use ACPI video if available, except when native should be preferred. */
 	if ((video_caps & ACPI_VIDEO_BACKLIGHT) &&
 	     !(native_available && prefer_native_over_acpi_video()))
diff --git a/drivers/ata/pata_macio.c b/drivers/ata/pata_macio.c
index 1b85e8bf4ef9..f2f36e55a1f4 100644
--- a/drivers/ata/pata_macio.c
+++ b/drivers/ata/pata_macio.c
@@ -208,6 +208,19 @@ static const char* macio_ata_names[] = {
 /* Don't let a DMA segment go all the way to 64K */
 #define MAX_DBDMA_SEG		0xff00
 
+#ifdef CONFIG_PAGE_SIZE_64KB
+/*
+ * The SCSI core requires the segment size to cover at least a page, so
+ * for 64K page size kernels it must be at least 64K. However the
+ * hardware can't handle 64K, so pata_macio_qc_prep() will split large
+ * requests. To handle the split requests the tablesize must be halved.
+ */
+#define PATA_MACIO_MAX_SEGMENT_SIZE	SZ_64K
+#define PATA_MACIO_SG_TABLESIZE		(MAX_DCMDS / 2)
+#else
+#define PATA_MACIO_MAX_SEGMENT_SIZE	MAX_DBDMA_SEG
+#define PATA_MACIO_SG_TABLESIZE		MAX_DCMDS
+#endif
 
 /*
  * Wait 1s for disk to answer on IDE bus after a hard reset
@@ -541,7 +554,8 @@ static enum ata_completion_errors pata_macio_qc_prep(struct ata_queued_cmd *qc)
 
 		while (sg_len) {
 			/* table overflow should never happen */
-			BUG_ON (pi++ >= MAX_DCMDS);
+			if (WARN_ON_ONCE(pi >= MAX_DCMDS))
+				return AC_ERR_SYSTEM;
 
 			len = (sg_len < MAX_DBDMA_SEG) ? sg_len : MAX_DBDMA_SEG;
 			table->command = cpu_to_le16(write ? OUTPUT_MORE: INPUT_MORE);
@@ -553,11 +567,13 @@ static enum ata_completion_errors pata_macio_qc_prep(struct ata_queued_cmd *qc)
 			addr += len;
 			sg_len -= len;
 			++table;
+			++pi;
 		}
 	}
 
 	/* Should never happen according to Tejun */
-	BUG_ON(!pi);
+	if (WARN_ON_ONCE(!pi))
+		return AC_ERR_SYSTEM;
 
 	/* Convert the last command to an input/output */
 	table--;
@@ -912,16 +928,10 @@ static int pata_macio_do_resume(struct pata_macio_priv *priv)
 
 static const struct scsi_host_template pata_macio_sht = {
 	__ATA_BASE_SHT(DRV_NAME),
-	.sg_tablesize		= MAX_DCMDS,
+	.sg_tablesize		= PATA_MACIO_SG_TABLESIZE,
 	/* We may not need that strict one */
 	.dma_boundary		= ATA_DMA_BOUNDARY,
-	/*
-	 * The SCSI core requires the segment size to cover at least a page, so
-	 * for 64K page size kernels this must be at least 64K. However the
-	 * hardware can't handle 64K, so pata_macio_qc_prep() will split large
-	 * requests.
-	 */
-	.max_segment_size	= SZ_64K,
+	.max_segment_size	= PATA_MACIO_MAX_SEGMENT_SIZE,
 	.device_configure	= pata_macio_device_configure,
 	.sdev_groups		= ata_common_sdev_groups,
 	.can_queue		= ATA_DEF_QUEUE,
diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c
index 7d5e4de64e3c..1ccbb5157515 100644
--- a/drivers/bluetooth/btintel.c
+++ b/drivers/bluetooth/btintel.c
@@ -12,6 +12,7 @@
 #include <linux/acpi.h>
 #include <acpi/acpi_bus.h>
 #include <asm/unaligned.h>
+#include <linux/efi.h>
 
 #include <net/bluetooth/bluetooth.h>
 #include <net/bluetooth/hci_core.h>
@@ -26,6 +27,8 @@
 #define ECDSA_OFFSET		644
 #define ECDSA_HEADER_LEN	320
 
+#define BTINTEL_EFI_DSBR	L"UefiCnvCommonDSBR"
+
 enum {
 	DSM_SET_WDISABLE2_DELAY = 1,
 	DSM_SET_RESET_METHOD = 3,
@@ -2616,6 +2619,120 @@ static u8 btintel_classify_pkt_type(struct hci_dev *hdev, struct sk_buff *skb)
 	return hci_skb_pkt_type(skb);
 }
 
+/*
+ * UefiCnvCommonDSBR UEFI variable provides information from the OEM platforms
+ * if they have replaced the BRI (Bluetooth Radio Interface) resistor to
+ * overcome the potential STEP errors on their designs. Based on the
+ * configauration, bluetooth firmware shall adjust the BRI response line drive
+ * strength. The below structure represents DSBR data.
+ * struct {
+ *	u8 header;
+ *	u32 dsbr;
+ * } __packed;
+ *
+ * header - defines revision number of the structure
+ * dsbr - defines drive