Merge tag 'pinctrl-for-v3.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control changes from Linus Walleij:

 - A large slew of improvements of the Genric pin configuration support,
   and deployment in four different platforms: Rockchip, Super-H PFC,
   ABx500 and TZ1090.  Support BIAS_BUS_HOLD, get device tree parsing
   and debugfs support into shape.

 - We also have device tree support with generic naming conventions for
   the generic pin configuration.

 - Delete the unused and confusing direct pinconf API.  Now state
   transitions is *the* way to control pins and multiplexing.

 - New drivers for Rockchip, TZ1090, and TZ1090 PDC.

 - Two pin control states related to power management are now handled in
   the device core: "sleep" and "idle", removing a lot of boilerplate
   code in drivers.  We do not yet know if this is the final word for
   pin PM, but it already make things a lot easier to handle.

 - Handle sparse GPIO ranges passing a list of disparate pins, and
   utilize these in the new BayTrail (x86 Atom SoC) driver.

 - Make the sunxi (AllWinner) driver handle external interrupts.

 - Make it possible for pinctrl-single to handle the case where several
   pins are managed by a single register, and augment it to handle sleep
   modes.

 - Cleanups and improvements for the abx500 drivers.

 - Move Sirf pin control drivers to their own directory, support
   save/restore of context and add support for the SiRFatlas6 SoC.

 - PMU muxing for the Dove pinctrl driver.

 - Finalization and support for VF610 in the i.MX6 pinctrl driver.

 - Smoothen out various Exynos rough edges.

 - Generic cleanups of various kinds.

* tag 'pinctrl-for-v3.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (82 commits)
  pinctrl: vt8500: wmt: remove redundant dev_err call in wmt_pinctrl_probe()
  pinctrl: remove bindings for pinconf options needing more thought
  pinctrl: remove slew-rate parameter from tz1090
  pinctrl: set unit for debounce time pinconfig to usec
  pinctrl: more clarifications for generic pull configs
  pinctrl: rip out the direct pinconf API
  pinctrl-tz1090-pdc: add TZ1090 PDC pinctrl driver
  pinctrl-tz1090: add TZ1090 pinctrl driver
  pinctrl: samsung: Staticize drvdata_list
  pinctrl: rockchip: Add missing irq_gc_unlock() call before return error
  pinctrl: abx500: rework error path
  pinctrl: abx500: suppress hardcoded value
  pinctrl: abx500: factorize code
  pinctrl: abx500: fix abx500_gpio_get()
  pinctrl: abx500: fix abx500_pin_config_set()
  pinctrl: abx500: Add device tree support
  sh-pfc: Guard DT parsing with #ifdef CONFIG_OF
  pinctrl: add Intel BayTrail GPIO/pinctrl support
  pinctrl: fix pinconf_ops::pin_config_dbg_parse_modify kerneldoc
  pinctrl: Staticize local symbols
  ...

Conflicts:
	drivers/net/ethernet/ti/davinci_mdio.c
	drivers/pinctrl/Makefile

43 files changed, 11238 insertions, 2864 deletions

diff --git a/drivers/base/pinctrl.c b/drivers/base/pinctrl.c
index 67a274e86727..5fb74b43848e 100644
--- a/drivers/base/pinctrl.c
+++ b/drivers/base/pinctrl.c
@@ -48,6 +48,25 @@ int pinctrl_bind_pins(struct device *dev)
 		goto cleanup_get;
 	}
 
+#ifdef CONFIG_PM
+	/*
+	 * If power management is enabled, we also look for the optional
+	 * sleep and idle pin states, with semantics as defined in
+	 * <linux/pinctrl/pinctrl-state.h>
+	 */
+	dev->pins->sleep_state = pinctrl_lookup_state(dev->pins->p,
+					PINCTRL_STATE_SLEEP);
+	if (IS_ERR(dev->pins->sleep_state))
+		/* Not supplying this state is perfectly legal */
+		dev_dbg(dev, "no sleep pinctrl state\n");
+
+	dev->pins->idle_state = pinctrl_lookup_state(dev->pins->p,
+					PINCTRL_STATE_IDLE);
+	if (IS_ERR(dev->pins->idle_state))
+		/* Not supplying this state is perfectly legal */
+		dev_dbg(dev, "no idle pinctrl state\n");
+#endif
+
 	return 0;
 
 	/*
diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index 650293ff4d62..c7e3b0c1a1ca 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -148,10 +148,6 @@ struct i2c_nmk_client {
  * @stop: stop condition.
  * @xfer_complete: acknowledge completion for a I2C message.
  * @result: controller propogated result.
- * @pinctrl: pinctrl handle.
- * @pins_default: default state for the pins.
- * @pins_idle: idle state for the pins.
- * @pins_sleep: sleep state for the pins.
  * @busy: Busy doing transfer.
  */
 struct nmk_i2c_dev {
@@ -165,11 +161,6 @@ struct nmk_i2c_dev {
 	int				stop;
 	struct completion		xfer_complete;
 	int				result;
-	/* Three pin states - default, idle & sleep */
-	struct pinctrl			*pinctrl;
-	struct pinctrl_state		*pins_default;
-	struct pinctrl_state		*pins_idle;
-	struct pinctrl_state		*pins_sleep;
 	bool				busy;
 };
 
@@ -645,13 +636,7 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
 	}
 
 	/* Optionaly enable pins to be muxed in and configured */
-	if (!IS_ERR(dev->pins_default)) {
-		status = pinctrl_select_state(dev->pinctrl,
-				dev->pins_default);
-		if (status)
-			dev_err(&dev->adev->dev,
-				"could not set default pins\n");
-	}
+	pinctrl_pm_select_default_state(&dev->adev->dev);
 
 	status = init_hw(dev);
 	if (status)
@@ -681,13 +666,7 @@ out:
 	clk_disable_unprepare(dev->clk);
 out_clk:
 	/* Optionally let pins go into idle state */
-	if (!IS_ERR(dev->pins_idle)) {
-		status = pinctrl_select_state(dev->pinctrl,
-				dev->pins_idle);
-		if (status)
-			dev_err(&dev->adev->dev,
-				"could not set pins to idle state\n");
-	}
+	pinctrl_pm_select_idle_state(&dev->adev->dev);
 
 	pm_runtime_put_sync(&dev->adev->dev);
 
@@ -882,41 +861,22 @@ static int nmk_i2c_suspend(struct device *dev)
 {
 	struct amba_device *adev = to_amba_device(dev);
 	struct nmk_i2c_dev *nmk_i2c = amba_get_drvdata(adev);
-	int ret;
 
 	if (nmk_i2c->busy)
 		return -EBUSY;
 
-	if (!IS_ERR(nmk_i2c->pins_sleep)) {
-		ret = pinctrl_select_state(nmk_i2c->pinctrl,
-				nmk_i2c->pins_sleep);
-		if (ret)
-			dev_err(dev, "could not set pins to sleep state\n");
-	}
+	pinctrl_pm_select_sleep_state(dev);
 
 	return 0;
 }
 
 static int nmk_i2c_resume(struct device *dev)
 {
-	struct amba_device *adev = to_amba_device(dev);
-	struct nmk_i2c_dev *nmk_i2c = amba_get_drvdata(adev);
-	int ret;
-
 	/* First go to the default state */
-	if (!IS_ERR(nmk_i2c->pins_default)) {
-		ret = pinctrl_select_state(nmk_i2c->pinctrl,
-				nmk_i2c->pins_default);
-		if (ret)
-			dev_err(dev, "could not set pins to default state\n");
-	}
+	pinctrl_pm_select_default_state(dev);
 	/* Then let's idle the pins until the next transfer happens */
-	if (!IS_ERR(nmk_i2c->pins_idle)) {
-		ret = pinctrl_select_state(nmk_i2c->pinctrl,
-				nmk_i2c->pins_idle);
-		if (ret)
-			dev_err(dev, "could not set pins to idle state\n");
-	}
+	pinctrl_pm_select_idle_state(dev);
+
 	return 0;
 }
 #else
@@ -1004,39 +964,10 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
 	dev->adev = adev;
 	amba_set_drvdata(adev, dev);
 
-	dev->pinctrl = devm_pinctrl_get(&adev->dev);
-	if (IS_ERR(dev->pinctrl)) {
-		ret = PTR_ERR(dev->pinctrl);
-		goto err_pinctrl;
-	}
-
-	dev->pins_default = pinctrl_lookup_state(dev->pinctrl,
-						 PINCTRL_STATE_DEFAULT);
-	if (IS_ERR(dev->pins_default)) {
-		dev_err(&adev->dev, "could not get default pinstate\n");
-	} else {
-		ret = pinctrl_select_state(dev->pinctrl,
-					   dev->pins_default);
-		if (ret)
-			dev_dbg(&adev->dev, "could not set default pinstate\n");
-	}
-
-	dev->pins_idle = pinctrl_lookup_state(dev->pinctrl,
-					      PINCTRL_STATE_IDLE);
-	if (IS_ERR(dev->pins_idle)) {
-		dev_dbg(&adev->dev, "could not get idle pinstate\n");
-	} else {
-		/* If possible, let's go to idle until the first transfer */
-		ret = pinctrl_select_state(dev->pinctrl,
-					   dev->pins_idle);
-		if (ret)
-			dev_dbg(&adev->dev, "could not set idle pinstate\n");
-	}
-
-	dev->pins_sleep = pinctrl_lookup_state(dev->pinctrl,
-					       PINCTRL_STATE_SLEEP);
-	if (IS_ERR(dev->pins_sleep))
-		dev_dbg(&adev->dev, "could not get sleep pinstate\n");
+	/* Select default pin state */
+	pinctrl_pm_select_default_state(&adev->dev);
+	/* If possible, let's go to idle until the first transfer */
+	pinctrl_pm_select_idle_state(&adev->dev);
 
 	dev->virtbase = ioremap(adev->res.start, resource_size(&adev->res));
 	if (!dev->virtbase) {
@@ -1106,7 +1037,6 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
 	iounmap(dev->virtbase);
  err_no_ioremap:
 	kfree(dev);
- err_pinctrl:
  err_no_mem:
 
 	return ret;
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index d1a769f35f9d..da4415d9dee6 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -35,6 +35,7 @@
 #include <linux/if_vlan.h>
 
 #include <linux/platform_data/cpsw.h>
+#include <linux/pinctrl/consumer.h>
 
 #include "cpsw_ale.h"
 #include "cpts.h"
@@ -1689,6 +1690,9 @@ static int cpsw_probe(struct platform_device *pdev)
 	 */
 	pm_runtime_enable(&pdev->dev);
 
+	/* Select default pin state */
+	pinctrl_pm_select_default_state(&pdev->dev);
+
 	if (cpsw_probe_dt(&priv->data, pdev)) {
 		pr_err("cpsw: platform data missing\n");
 		ret = -ENODEV;
@@ -1981,6 +1985,9 @@ static int cpsw_suspend(struct device *dev)
 	soft_reset("sliver 1", &priv->slaves[1].sliver->soft_reset);
 	pm_runtime_put_sync(&pdev->dev);
 
+	/* Select sleep pin state */
+	pinctrl_pm_select_sleep_state(&pdev->dev);
+
 	return 0;
 }
 
@@ -1990,6 +1997,10 @@ static int cpsw_resume(struct device *dev)
 	struct net_device	*ndev = platform_get_drvdata(pdev);
 
 	pm_runtime_get_sync(&pdev->dev);
+
+	/* Select default pin state */
+	pinctrl_pm_select_default_state(&pdev->dev);
+
 	if (netif_running(ndev))
 		cpsw_ndo_open(ndev);
 	return 0;
diff --git a/drivers/net/ethernet/ti/davinci_mdio.c b/drivers/net/ethernet/ti/davinci_mdio.c
index c47f0dbcebb5..ce7c4991e41c 100644
--- a/drivers/net/ethernet/ti/davinci_mdio.c
+++ b/drivers/net/ethernet/ti/davinci_mdio.c
@@ -38,6 +38,7 @@
 #include <linux/davinci_emac.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
+#include <linux/pinctrl/consumer.h>
 
 /*
  * This timeout definition is a worst-case ultra defensive measure against
@@ -347,6 +348,9 @@ static int davinci_mdio_probe(struct platform_device *pdev)
 	data->bus->parent	= dev;
 	data->bus->priv		= data;
 
+	/* Select default pin state */
+	pinctrl_pm_select_default_state(&pdev->dev);
+
 	pm_runtime_enable(&pdev->dev);
 	pm_runtime_get_sync(&pdev->dev);
 	data->clk = clk_get(&pdev->dev, "fck");
@@ -453,6 +457,9 @@ static int davinci_mdio_suspend(struct device *dev)
 	spin_unlock(&data->lock);
 	pm_runtime_put_sync(data->dev);
 
+	/* Select sleep pin state */
+	pinctrl_pm_select_sleep_state(dev);
+
 	return 0;
 }
 
@@ -460,6 +467,9 @@ static int davinci_mdio_resume(struct device *dev)
 {
 	struct davinci_mdio_data *data = dev_get_drvdata(dev);
 
+	/* Select default pin state */
+	pinctrl_pm_select_default_state(dev);
+
 	pm_runtime_get_sync(data->dev);
 
 	spin_lock(&data->lock);
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 19396c8ffe45..5a8ad5139312 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -58,6 +58,18 @@ config PINCTRL_AT91
 	help
 	  Say Y here to enable the at91 pinctrl driver
 
+config PINCTRL_BAYTRAIL
+	bool "Intel Baytrail GPIO pin control"
+	depends on GPIOLIB && ACPI && X86
+        select IRQ_DOMAIN
+	help
+	  driver for memory mapped GPIO functionality on Intel Baytrail
+	  platforms. Supports 3 banks with 102, 28 and 44 gpios.
+	  Most pins are usually muxed to some other functionality by firmware,
+	  so only a small amount is available for gpio use.
+
+	  Requires ACPI device enumeration code to set up a platform device.
+
 config PINCTRL_BCM2835
 	bool
 	select PINMUX
@@ -108,6 +120,14 @@ config PINCTRL_IMX6SL
 	help
 	  Say Y here to enable the imx6sl pinctrl driver
 
+config PINCTRL_VF610
+	bool "Freescale Vybrid VF610 pinctrl driver"
+	depends on OF
+	depends on SOC_VF610
+	select PINCTRL_IMX
+	help
+	  Say Y here to enable the Freescale Vybrid VF610 pinctrl driver
+
 config PINCTRL_LANTIQ
 	bool
 	depends on LANTIQ
@@ -150,6 +170,12 @@ config PINCTRL_DB8540
 	bool "DB8540 pin controller driver"
 	depends on PINCTRL_NOMADIK && ARCH_U8500
 
+config PINCTRL_ROCKCHIP
+	bool
+	select PINMUX
+	select GENERIC_PINCONF
+	select GENERIC_IRQ_CHIP
+
 config PINCTRL_SINGLE
 	tristate "One-register-per-pin type device tree based pinctrl driver"
 	depends on OF
@@ -192,6 +218,18 @@ config PINCTRL_TEGRA114
 	bool
 	select PINCTRL_TEGRA
 
+config PINCTRL_TZ1090
+	bool "Toumaz Xenif TZ1090 pin control driver"
+	depends on SOC_TZ1090
+	select PINMUX
+	select GENERIC_PINCONF
+
+config PINCTRL_TZ1090_PDC
+	bool "Toumaz Xenif TZ1090 PDC pin control driver"
+	depends on SOC_TZ1090
+	select PINMUX
+	select PINCONF
+
 config PINCTRL_U300
 	bool "U300 pin controller driver"
 	depends on ARCH_U300
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index 76c937cbbb13..d64563bf6fb4 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -16,12 +16,14 @@ obj-$(CONFIG_PINCTRL_AB9540)	+= pinctrl-ab9540.o
 obj-$(CONFIG_PINCTRL_AB8505)	+= pinctrl-ab8505.o
 obj-$(CONFIG_PINCTRL_AT91)	+= pinctrl-at91.o
 obj-$(CONFIG_PINCTRL_BCM2835)	+= pinctrl-bcm2835.o
+obj-$(CONFIG_PINCTRL_BAYTRAIL)	+= pinctrl-baytrail.o
 obj-$(CONFIG_PINCTRL_IMX)	+= pinctrl-imx.o
 obj-$(CONFIG_PINCTRL_IMX35)	+= pinctrl-imx35.o
 obj-$(CONFIG_PINCTRL_IMX51)	+= pinctrl-imx51.o
 obj-$(CONFIG_PINCTRL_IMX53)	+= pinctrl-imx53.o
 obj-$(CONFIG_PINCTRL_IMX6Q)	+= pinctrl-imx6q.o
 obj-$(CONFIG_PINCTRL_IMX6Q)	+= pinctrl-imx6dl.o
+obj-$(CONFIG_PINCTRL_IMX6SL)	+= pinctrl-imx6sl.o
 obj-$(CONFIG_PINCTRL_FALCON)	+= pinctrl-falcon.o
 obj-$(CONFIG_PINCTRL_MXS)	+= pinctrl-mxs.o
 obj-$(CONFIG_PINCTRL_IMX23)	+= pinctrl-imx23.o
@@ -30,13 +32,16 @@ obj-$(CONFIG_PINCTRL_NOMADIK)	+= pinctrl-nomadik.o
 obj-$(CONFIG_PINCTRL_STN8815)	+= pinctrl-nomadik-stn8815.o
 obj-$(CONFIG_PINCTRL_DB8500)	+= pinctrl-nomadik-db8500.o
 obj-$(CONFIG_PINCTRL_DB8540)	+= pinctrl-nomadik-db8540.o
+obj-$(CONFIG_PINCTRL_ROCKCHIP)	+= pinctrl-rockchip.o
 obj-$(CONFIG_PINCTRL_SINGLE)	+= pinctrl-single.o
-obj-$(CONFIG_PINCTRL_SIRF)	+= pinctrl-sirf.o
+obj-$(CONFIG_PINCTRL_SIRF)	+= sirf/
 obj-$(CONFIG_PINCTRL_SUNXI)	+= pinctrl-sunxi.o
 obj-$(CONFIG_PINCTRL_TEGRA)	+= pinctrl-tegra.o
 obj-$(CONFIG_PINCTRL_TEGRA20)	+= pinctrl-tegra20.o
 obj-$(CONFIG_PINCTRL_TEGRA30)	+= pinctrl-tegra30.o
 obj-$(CONFIG_PINCTRL_TEGRA114)	+= pinctrl-tegra114.o
+obj-$(CONFIG_PINCTRL_TZ1090)	+= pinctrl-tz1090.o
+obj-$(CONFIG_PINCTRL_TZ1090_PDC)	+= pinctrl-tz1090-pdc.o
 obj-$(CONFIG_PINCTRL_U300)	+= pinctrl-u300.o
 obj-$(CONFIG_PINCTRL_COH901)	+= pinctrl-coh901.o
 obj-$(CONFIG_PINCTRL_SAMSUNG)	+= pinctrl-samsung.o
@@ -47,6 +52,7 @@ obj-$(CONFIG_PINCTRL_S3C64XX)	+= pinctrl-s3c64xx.o
 obj-$(CONFIG_PINCTRL_XWAY)	+= pinctrl-xway.o
 obj-$(CONFIG_PINCTRL_LANTIQ)	+= pinctrl-lantiq.o
 obj-$(CONFIG_PINCTRL_ST) 	+= pinctrl-st.o
+obj-$(CONFIG_PINCTRL_VF610)	+= pinctrl-vf610.o
 
 obj-$(CONFIG_PLAT_ORION)        += mvebu/
 obj-$(CONFIG_ARCH_SHMOBILE)	+= sh-pfc/
diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c
index 5327f35d9b5c..5b272bfd261d 100644
--- a/drivers/pinctrl/core.c
+++ b/drivers/pinctrl/core.c
@@ -41,13 +41,13 @@
 static bool pinctrl_dummy_state;
 
 /* Mutex taken to protect pinctrl_list */
-DEFINE_MUTEX(pinctrl_list_mutex);
+static DEFINE_MUTEX(pinctrl_list_mutex);
 
 /* Mutex taken to protect pinctrl_maps */
 DEFINE_MUTEX(pinctrl_maps_mutex);
 
 /* Mutex taken to protect pinctrldev_list */
-DEFINE_MUTEX(pinctrldev_list_mutex);
+static DEFINE_MUTEX(pinctrldev_list_mutex);
 
 /* Global list of pin control devices (struct pinctrl_dev) */
 static LIST_HEAD(pinctrldev_list);
@@ -101,20 +101,23 @@ EXPORT_SYMBOL_GPL(pinctrl_dev_get_drvdata);
 struct pinctrl_dev *get_pinctrl_dev_from_devname(const char *devname)
 {
 	struct pinctrl_dev *pctldev = NULL;
-	bool found = false;
 
 	if (!devname)
 		return NULL;
 
+	mutex_lock(&pinctrldev_list_mutex);
+
 	list_for_each_entry(pctldev, &pinctrldev_list, node) {
 		if (!strcmp(dev_name(pctldev->dev), devname)) {
 			/* Matched on device name */
-			found = true;
-			break;
+			mutex_unlock(&pinctrldev_list_mutex);
+			return pctldev;
 		}
 	}
 
-	return found ? pctldev : NULL;
+	mutex_unlock(&pinctrldev_list_mutex);
+
+	return NULL;
 }
 
 struct pinctrl_dev *get_pinctrl_dev_from_of_node(struct device_node *np)
@@ -280,6 +283,29 @@ static int pinctrl_register_pins(struct pinctrl_dev *pctldev,
 }
 
 /**
+ * gpio_to_pin() - GPIO range GPIO number to pin number translation
+ * @range: GPIO range used for the translation
+ * @gpio: gpio pin to translate to a pin number
+ *
+ * Finds the pin number for a given GPIO using the specified GPIO range
+ * as a base for translation. The distinction between linear GPIO ranges
+ * and pin list based GPIO ranges is managed correctly by this function.
+ *
+ * This function assumes the gpio is part of the specified GPIO range, use
+ * only after making sure this is the case (e.g. by calling it on the
+ * result of successful pinctrl_get_device_gpio_range calls)!
+ */
+static inline int gpio_to_pin(struct pinctrl_gpio_range *range,
+				unsigned int gpio)
+{
+	unsigned int offset = gpio - range->base;
+	if (range->pins)
+		return range->pins[offset];
+	else
+		return range->pin_base + offset;
+}
+
+/**
  * pinctrl_match_gpio_range() - check if a certain GPIO pin is in range
  * @pctldev: pin controller device to check
  * @gpio: gpio pin to check taken from the global GPIO pin space
@@ -326,6 +352,8 @@ static bool pinctrl_ready_for_gpio_range(unsigned gpio)
 	struct pinctrl_gpio_range *range = NULL;
 	struct gpio_chip *chip = gpio_to_chip(gpio);
 
+	mutex_lock(&pinctrldev_list_mutex);
+
 	/* Loop over the pin controllers */
 	list_for_each_entry(pctldev, &pinctrldev_list, node) {
 		/* Loop over the ranges */
@@ -334,9 +362,13 @@ static bool pinctrl_ready_for_gpio_range(unsigned gpio)
 			if (range->base + range->npins - 1 < chip->base ||
 			    range->base > chip->base + chip->ngpio - 1)
 				continue;
+			mutex_unlock(&pinctrldev_list_mutex);
 			return true;
 		}
 	}
+
+	mutex_unlock(&pinctrldev_list_mutex);
+
 	return false;
 }
 #else
@@ -408,8 +440,6 @@ struct pinctrl_dev *pinctrl_find_and_add_gpio_range(const char *devname,
 {
 	struct pinctrl_dev *pctldev;
 
-	mutex_lock(&pinctrldev_list_mutex);
-
 	pctldev = get_pinctrl_dev_from_devname(devname);
 
 	/*
@@ -418,13 +448,10 @@ struct pinctrl_dev *pinctrl_find_and_add_gpio_range(const char *devname,
 	 * range need to defer probing.
 	 */
 	if (!pctldev) {
-		mutex_unlock(&pinctrldev_list_mutex);
 		return ERR_PTR(-EPROBE_DEFER);
 	}
 	pinctrl_add_gpio_range(pctldev, range);
 
-	mutex_unlock(&pinctrldev_list_mutex);
-
 	return pctldev;
 }
 EXPORT_SYMBOL_GPL(pinctrl_find_and_add_gpio_range);
@@ -438,21 +465,26 @@ struct pinctrl_gpio_range *
 pinctrl_find_gpio_range_from_pin(struct pinctrl_dev *pctldev,
 				 unsigned int pin)
 {
-	struct pinctrl_gpio_range *range = NULL;
+	struct pinctrl_gpio_range *range;
 
 	mutex_lock(&pctldev->mutex);
 	/* Loop over the ranges */
 	list_for_each_entry(range, &pctldev->gpio_ranges, node) {
 		/* Check if we're in the valid range */
-		if (pin >= range->pin_base &&
-		    pin < range->pin_base + range->npins) {
-			mutex_unlock(&pctldev->mutex);
-			return range;
-		}
+		if (range->pins) {
+			int a;
+			for (a = 0; a < range->npins; a++) {
+				if (range->pins[a] == pin)
+					goto out;
+			}
+		} else if (pin >= range->pin_base &&
+			   pin < range->pin_base + range->npins)
+			goto out;
 	}
+	range = NULL;
+out:
 	mutex_unlock(&pctldev->mutex);
-
-	return NULL;
+	return range;
 }
 EXPORT_SYMBOL_GPL(pinctrl_find_gpio_range_from_pin);
 
@@ -517,22 +549,18 @@ int pinctrl_request_gpio(unsigned gpio)
 	int ret;
 	int pin;
 
-	mutex_lock(&pinctrldev_list_mutex);
-
 	ret = pinctrl_get_device_gpio_range(gpio, &pctldev, &range);
 	if (ret) {
 		if (pinctrl_ready_for_gpio_range(gpio))
 			ret = 0;
-		mutex_unlock(&pinctrldev_list_mutex);
 		return ret;
 	}
 
 	/* Convert to the pin controllers number space */
-	pin = gpio - range->base + range->pin_base;
+	pin = gpio_to_pin(range, gpio);
 
 	ret = pinmux_request_gpio(pctldev, range, pin, gpio);
 
-	mutex_unlock(&pinctrldev_list_mutex);
 	return ret;
 }
 EXPORT_SYMBOL_GPL(pinctrl_request_gpio);
@@ -552,22 +580,18 @@ void pinctrl_free_gpio(unsigned gpio)
 	int ret;
 	int pin;
 
-	mutex_lock(&pinctrldev_list_mutex);
-
 	ret = pinctrl_get_device_gpio_range(gpio, &pctldev, &range);
 	if (ret) {
-		mutex_unlock(&pinctrldev_list_mutex);
 		return;
 	}
 	mutex_lock(&pctldev->mutex);
 
 	/* Convert to the pin controllers number space */
-	pin = gpio - range->base + range->pin_base;
+	pin = gpio_to_pin(range, gpio);
 
 	pinmux_free_gpio(pctldev, pin, range);
 
 	mutex_unlock(&pctldev->mutex);
-	mutex_unlock(&pinctrldev_list_mutex);
 }
 EXPORT_SYMBOL_GPL(pinctrl_free_gpio);
 
@@ -578,22 +602,18 @@ static int pinctrl_gpio_direction(unsigned gpio, bool input)
 	int ret;
 	int pin;
 
-	mutex_lock(&pinctrldev_list_mutex);
-
 	ret = pinctrl_get_device_gpio_range(gpio, &pctldev, &range);
 	if (ret) {
-		mutex_unlock(&pinctrldev_list_mutex);
 		return ret;
 	}
 
 	mutex_lock(&pctldev->mutex);
 
 	/* Convert to the pin controllers number space */
-	pin = gpio - range->base + range->pin_base;
+	pin = gpio_to_pin(range, gpio);
 	ret = pinmux_gpio_direction(pctldev, range, pin, input);
 
 	mutex_unlock(&pctldev->mutex);
-	mutex_unlock(&pinctrldev_list_mutex);
 
 	return ret;
 }
@@ -1204,6 +1224,69 @@ int pinctrl_force_default(struct pinctrl_dev *pctldev)
 }
 EXPORT_SYMBOL_GPL(pinctrl_force_default);
 
+#ifdef CONFIG_PM
+
+/**
+ * pinctrl_pm_select_default_state() - select default pinctrl state for PM
+ * @dev: device to select default state for
+ */
+int pinctrl_pm_select_default_state(struct device *dev)
+{
+	struct dev_pin_info *pins = dev->pins;
+	int ret;
+
+	if (!pins)
+		return 0;
+	if (IS_ERR(pins->default_state))
+		return 0; /* No default state */
+	ret = pinctrl_select_state(pins->p, pins->default_state);
+	if (ret)
+		dev_err(dev, "failed to activate default pinctrl state\n");
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pinctrl_pm_select_default_state);
+
+/**
+ * pinctrl_pm_select_sleep_state() - select sleep pinctrl state for PM
+ * @dev: device to select sleep state for
+ */
+int pinctrl_pm_select_sleep_state(struct device *dev)
+{
+	struct dev_pin_info *pins = dev->pins;
+	int ret;
+
+	if (!pins)
+		return 0;
+	if (IS_ERR(pins->sleep_state))
+		return 0; /* No sleep state */
+	ret = pinctrl_select_state(pins->p, pins->sleep_state);
+	if (ret)
+		dev_err(dev, "failed to activate pinctrl sleep state\n");
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pinctrl_pm_select_sleep_state);
+
+/**
+ * pinctrl_pm_select_idle_state() - select idle pinctrl state for PM
+ * @dev: device to select idle state for
+ */
+int pinctrl_pm_