Merge tag 'pinctrl-v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control bulk updates from Linus Walleij:
 "New drivers:

   - Qualcomm SDM845: this is their new flagship SoC platform which
     seems to be targeted at premium mobile handsets.

   - Renesas R-Car M3-N SoC.

   - Renesas R8A77980 SoC.

   - NXP (ex Freescale) i.MX 6SLL SoC.

   - Mediatek MT2712 SoC.

   - Allwinner H6 SoC.

  Improvements:

   - Uniphier adds a few new functions and pins.

   - Renesas refactorings and additional pin definitions.

   - Improved pin groups for Axis Artpec6.

  Cleanup:

   - Drop the TZ1090 drivers. This platform is no longer maintained and
     is being deleted.

   - Drop ST-Ericsson U8540/U9540 support as this was never
     productified.

   - Overall minor fixes and janitorial"

* tag 'pinctrl-v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (82 commits)
  pinctrl: uniphier: add UART hardware flow control pin-mux settings
  pinctrl: sunxi: add support for the Allwinner H6 main pin controller
  pinctrl: sunxi: change irq_bank_base to irq_bank_map
  pinctrl: sunxi: introduce IRQ bank conversion function
  pinctrl: sunxi: refactor irq related register function to have desc
  pinctrl: msm8998: Remove owner assignment from platform_driver
  pinctrl: uniphier: divide I2S and S/PDIF audio out pin-mux group
  pinctrl: uniphier: add PXs2 Audio in/out pin-mux settings
  pinctrl/amd: poll InterruptEnable bits in enable_irq
  pinctrl: ocelot: fix gpio direction
  pinctrl: mtk: fix check warnings.
  pintcrl: mtk: support bias-disable of generic and special pins simultaneously
  pinctrl: add mt2712 pinctrl driver
  pinctrl: pinctrl-single: Fix pcs_request_gpio() when bits_per_mux != 0
  pinctrl: imx: Add pinctrl driver support for imx6sll
  dt-bindings: imx: update pinctrl doc for imx6sll
  pinctrl: intel: Implement intel_gpio_get_direction callback
  pinctrl: stm32: add 'depends on HAS_IOMEM' to fix unmet dependency
  pinctrl: mediatek: mtk-common: use true and false for boolean values
  pinctrl: sunxi: always look for apb block
  ...

70 files changed, 13148 insertions, 7246 deletions

diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 008073570a38..01fe8e0455a0 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -244,18 +244,6 @@ config PINCTRL_ST
 	select PINCONF
 	select GPIOLIB_IRQCHIP
 
-config PINCTRL_TZ1090
-	bool "Toumaz Xenif TZ1090 pin control driver"
-	depends on SOC_TZ1090
-	select PINMUX
-	select GENERIC_PINCONF
-
-config PINCTRL_TZ1090_PDC
-	bool "Toumaz Xenif TZ1090 PDC pin control driver"
-	depends on SOC_TZ1090
-	select PINMUX
-	select PINCONF
-
 config PINCTRL_U300
 	bool "U300 pin controller driver"
 	depends on ARCH_U300
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index 92a40bdb6273..657332b121fb 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -31,8 +31,6 @@ obj-$(CONFIG_PINCTRL_SINGLE)	+= pinctrl-single.o
 obj-$(CONFIG_PINCTRL_SIRF)	+= sirf/
 obj-$(CONFIG_PINCTRL_SX150X)	+= pinctrl-sx150x.o
 obj-$(CONFIG_ARCH_TEGRA)	+= tegra/
-obj-$(CONFIG_PINCTRL_TZ1090)	+= pinctrl-tz1090.o
-obj-$(CONFIG_PINCTRL_TZ1090_PDC)	+= pinctrl-tz1090-pdc.o
 obj-$(CONFIG_PINCTRL_U300)	+= pinctrl-u300.o
 obj-$(CONFIG_PINCTRL_COH901)	+= pinctrl-coh901.o
 obj-$(CONFIG_PINCTRL_XWAY)	+= pinctrl-xway.o
diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c
index 2c0dbfcff3e6..e5a303002021 100644
--- a/drivers/pinctrl/core.c
+++ b/drivers/pinctrl/core.c
@@ -1416,6 +1416,7 @@ int pinctrl_register_mappings(const struct pinctrl_map *maps,
 {
 	return pinctrl_register_map(maps, num_maps, true);
 }
+EXPORT_SYMBOL_GPL(pinctrl_register_mappings);
 
 void pinctrl_unregister_map(const struct pinctrl_map *map)
 {
@@ -1586,6 +1587,7 @@ static int pinctrl_pins_show(struct seq_file *s, void *what)
 
 	return 0;
 }
+DEFINE_SHOW_ATTRIBUTE(pinctrl_pins);
 
 static int pinctrl_groups_show(struct seq_file *s, void *what)
 {
@@ -1631,6 +1633,7 @@ static int pinctrl_groups_show(struct seq_file *s, void *what)
 
 	return 0;
 }
+DEFINE_SHOW_ATTRIBUTE(pinctrl_groups);
 
 static int pinctrl_gpioranges_show(struct seq_file *s, void *what)
 {
@@ -1664,6 +1667,7 @@ static int pinctrl_gpioranges_show(struct seq_file *s, void *what)
 
 	return 0;
 }
+DEFINE_SHOW_ATTRIBUTE(pinctrl_gpioranges);
 
 static int pinctrl_devices_show(struct seq_file *s, void *what)
 {
@@ -1690,6 +1694,7 @@ static int pinctrl_devices_show(struct seq_file *s, void *what)
 
 	return 0;
 }
+DEFINE_SHOW_ATTRIBUTE(pinctrl_devices);
 
 static inline const char *map_type(enum pinctrl_map_type type)
 {
@@ -1743,6 +1748,7 @@ static int pinctrl_maps_show(struct seq_file *s, void *what)
 
 	return 0;
 }
+DEFINE_SHOW_ATTRIBUTE(pinctrl_maps);
 
 static int pinctrl_show(struct seq_file *s, void *what)
 {
@@ -1788,87 +1794,30 @@ static int pinctrl_show(struct seq_file *s, void *what)
 
 	return 0;
 }
-
-static int pinctrl_pins_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, pinctrl_pins_show, inode->i_private);
-}
-
-static int pinctrl_groups_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, pinctrl_groups_show, inode->i_private);
-}
-
-static int pinctrl_gpioranges_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, pinctrl_gpioranges_show, inode->i_private);
-}
-
-static int pinctrl_devices_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, pinctrl_devices_show, NULL);
-}
-
-static int pinctrl_maps_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, pinctrl_maps_show, NULL);
-}
-
-static int pinctrl_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, pinctrl_show, NULL);
-}
-
-static const struct file_operations pinctrl_pins_ops = {
-	.open		= pinctrl_pins_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-static const struct file_operations pinctrl_groups_ops = {
-	.open		= pinctrl_groups_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-static const struct file_operations pinctrl_gpioranges_ops = {
-	.open		= pinctrl_gpioranges_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-static const struct file_operations pinctrl_devices_ops = {
-	.open		= pinctrl_devices_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-static const struct file_operations pinctrl_maps_ops = {
-	.open		= pinctrl_maps_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-static const struct file_operations pinctrl_ops = {
-	.open		= pinctrl_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(pinctrl);
 
 static struct dentry *debugfs_root;
 
 static void pinctrl_init_device_debugfs(struct pinctrl_dev *pctldev)
 {
 	struct dentry *device_root;
+	const char *debugfs_name;
+
+	if (pctldev->desc->name &&
+			strcmp(dev_name(pctldev->dev), pctldev->desc->name)) {
+		debugfs_name = devm_kasprintf(pctldev->dev, GFP_KERNEL,
+				"%s-%s", dev_name(pctldev->dev),
+				pctldev->desc->name);
+		if (!debugfs_name) {
+			pr_warn("failed to determine debugfs dir name for %s\n",
+				dev_name(pctldev->dev));
+			return;
+		}
+	} else {
+		debugfs_name = dev_name(pctldev->dev);
+	}
 
-	device_root = debugfs_create_dir(dev_name(pctldev->dev),
-					 debugfs_root);
+	device_root = debugfs_create_dir(debugfs_name, debugfs_root);
 	pctldev->device_root = device_root;
 
 	if (IS_ERR(device_root) || !device_root) {
@@ -1877,11 +1826,11 @@ static void pinctrl_init_device_debugfs(struct pinctrl_dev *pctldev)
 		return;
 	}
 	debugfs_create_file("pins", S_IFREG | S_IRUGO,
-			    device_root, pctldev, &pinctrl_pins_ops);
+			    device_root, pctldev, &pinctrl_pins_fops);
 	debugfs_create_file("pingroups", S_IFREG | S_IRUGO,
-			    device_root, pctldev, &pinctrl_groups_ops);
+			    device_root, pctldev, &pinctrl_groups_fops);
 	debugfs_create_file("gpio-ranges", S_IFREG | S_IRUGO,
-			    device_root, pctldev, &pinctrl_gpioranges_ops);
+			    device_root, pctldev, &pinctrl_gpioranges_fops);
 	if (pctldev->desc->pmxops)
 		pinmux_init_device_debugfs(device_root, pctldev);
 	if (pctldev->desc->confops)
@@ -1903,11 +1852,11 @@ static void pinctrl_init_debugfs(void)
 	}
 
 	debugfs_create_file("pinctrl-devices", S_IFREG | S_IRUGO,
-			    debugfs_root, NULL, &pinctrl_devices_ops);
+			    debugfs_root, NULL, &pinctrl_devices_fops);
 	debugfs_create_file("pinctrl-maps", S_IFREG | S_IRUGO,
-			    debugfs_root, NULL, &pinctrl_maps_ops);
+			    debugfs_root, NULL, &pinctrl_maps_fops);
 	debugfs_create_file("pinctrl-handles", S_IFREG | S_IRUGO,
-			    debugfs_root, NULL, &pinctrl_ops);
+			    debugfs_root, NULL, &pinctrl_fops);
 }
 
 #else /* CONFIG_DEBUG_FS */
diff --git a/drivers/pinctrl/devicetree.c b/drivers/pinctrl/devicetree.c
index 1ff6c3573493..b601039d6c69 100644
--- a/drivers/pinctrl/devicetree.c
+++ b/drivers/pinctrl/devicetree.c
@@ -122,8 +122,10 @@ static int dt_to_map_one_config(struct pinctrl *p,
 			/* OK let's just assume this will appear later then */
 			return -EPROBE_DEFER;
 		}
-		if (!pctldev)
-			pctldev = get_pinctrl_dev_from_of_node(np_pctldev);
+		/* If we're creating a hog we can use the passed pctldev */
+		if (pctldev && (np_pctldev == p->dev->of_node))
+			break;
+		pctldev = get_pinctrl_dev_from_of_node(np_pctldev);
 		if (pctldev)
 			break;
 		/* Do not defer probing of hogs (circular loop) */
diff --git a/drivers/pinctrl/freescale/Kconfig b/drivers/pinctrl/freescale/Kconfig
index 4dbc576ae27c..0d8ba1ef5329 100644
--- a/drivers/pinctrl/freescale/Kconfig
+++ b/drivers/pinctrl/freescale/Kconfig
@@ -82,6 +82,13 @@ config PINCTRL_IMX6SL
 	help
 	  Say Y here to enable the imx6sl pinctrl driver
 
+config PINCTRL_IMX6SLL
+	bool "IMX6SLL pinctrl driver"
+	depends on SOC_IMX6SLL
+	select PINCTRL_IMX
+	help
+	  Say Y here to enable the imx6sll pinctrl driver
+
 config PINCTRL_IMX6SX
 	bool "IMX6SX pinctrl driver"
 	depends on SOC_IMX6SX
diff --git a/drivers/pinctrl/freescale/Makefile b/drivers/pinctrl/freescale/Makefile
index 19bb9a55a567..368be8cfc9b1 100644
--- a/drivers/pinctrl/freescale/Makefile
+++ b/drivers/pinctrl/freescale/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_PINCTRL_IMX53)	+= pinctrl-imx53.o
 obj-$(CONFIG_PINCTRL_IMX6Q)	+= pinctrl-imx6q.o
 obj-$(CONFIG_PINCTRL_IMX6Q)	+= pinctrl-imx6dl.o
 obj-$(CONFIG_PINCTRL_IMX6SL)	+= pinctrl-imx6sl.o
+obj-$(CONFIG_PINCTRL_IMX6SLL)	+= pinctrl-imx6sll.o
 obj-$(CONFIG_PINCTRL_IMX6SX)	+= pinctrl-imx6sx.o
 obj-$(CONFIG_PINCTRL_IMX6UL)	+= pinctrl-imx6ul.o
 obj-$(CONFIG_PINCTRL_IMX7D)	+= pinctrl-imx7d.o
diff --git a/drivers/pinctrl/freescale/pinctrl-imx6sll.c b/drivers/pinctrl/freescale/pinctrl-imx6sll.c
new file mode 100644
index 000000000000..0fbea9cf536d
--- /dev/null
+++ b/drivers/pinctrl/freescale/pinctrl-imx6sll.c
@@ -0,0 +1,360 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2018 NXP.
+ *
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-imx.h"
+
+enum imx6sll_pads {
+	MX6SLL_PAD_RESERVE0 = 0,
+	MX6SLL_PAD_RESERVE1 = 1,
+	MX6SLL_PAD_RESERVE2 = 2,
+	MX6SLL_PAD_RESERVE3 = 3,
+	MX6SLL_PAD_RESERVE4 = 4,
+	MX6SLL_PAD_WDOG_B = 5,
+	MX6SLL_PAD_REF_CLK_24M = 6,
+	MX6SLL_PAD_REF_CLK_32K = 7,
+	MX6SLL_PAD_PWM1 = 8,
+	MX6SLL_PAD_KEY_COL0 = 9,
+	MX6SLL_PAD_KEY_ROW0 = 10,
+	MX6SLL_PAD_KEY_COL1 = 11,
+	MX6SLL_PAD_KEY_ROW1 = 12,
+	MX6SLL_PAD_KEY_COL2 = 13,
+	MX6SLL_PAD_KEY_ROW2 = 14,
+	MX6SLL_PAD_KEY_COL3 = 15,
+	MX6SLL_PAD_KEY_ROW3 = 16,
+	MX6SLL_PAD_KEY_COL4 = 17,
+	MX6SLL_PAD_KEY_ROW4 = 18,
+	MX6SLL_PAD_KEY_COL5 = 19,
+	MX6SLL_PAD_KEY_ROW5 = 20,
+	MX6SLL_PAD_KEY_COL6 = 21,
+	MX6SLL_PAD_KEY_ROW6 = 22,
+	MX6SLL_PAD_KEY_COL7 = 23,
+	MX6SLL_PAD_KEY_ROW7 = 24,
+	MX6SLL_PAD_EPDC_DATA00 = 25,
+	MX6SLL_PAD_EPDC_DATA01 = 26,
+	MX6SLL_PAD_EPDC_DATA02 = 27,
+	MX6SLL_PAD_EPDC_DATA03 = 28,
+	MX6SLL_PAD_EPDC_DATA04 = 29,
+	MX6SLL_PAD_EPDC_DATA05 = 30,
+	MX6SLL_PAD_EPDC_DATA06 = 31,
+	MX6SLL_PAD_EPDC_DATA07 = 32,
+	MX6SLL_PAD_EPDC_DATA08 = 33,
+	MX6SLL_PAD_EPDC_DATA09 = 34,
+	MX6SLL_PAD_EPDC_DATA10 = 35,
+	MX6SLL_PAD_EPDC_DATA11 = 36,
+	MX6SLL_PAD_EPDC_DATA12 = 37,
+	MX6SLL_PAD_EPDC_DATA13 = 38,
+	MX6SLL_PAD_EPDC_DATA14 = 39,
+	MX6SLL_PAD_EPDC_DATA15 = 40,
+	MX6SLL_PAD_EPDC_SDCLK = 41,
+	MX6SLL_PAD_EPDC_SDLE = 42,
+	MX6SLL_PAD_EPDC_SDOE = 43,
+	MX6SLL_PAD_EPDC_SDSHR = 44,
+	MX6SLL_PAD_EPDC_SDCE0 = 45,
+	MX6SLL_PAD_EPDC_SDCE1 = 46,
+	MX6SLL_PAD_EPDC_SDCE2 = 47,
+	MX6SLL_PAD_EPDC_SDCE3 = 48,
+	MX6SLL_PAD_EPDC_GDCLK = 49,
+	MX6SLL_PAD_EPDC_GDOE = 50,
+	MX6SLL_PAD_EPDC_GDRL = 51,
+	MX6SLL_PAD_EPDC_GDSP = 52,
+	MX6SLL_PAD_EPDC_VCOM0 = 53,
+	MX6SLL_PAD_EPDC_VCOM1 = 54,
+	MX6SLL_PAD_EPDC_BDR0 = 55,
+	MX6SLL_PAD_EPDC_BDR1 = 56,
+	MX6SLL_PAD_EPDC_PWR_CTRL0 = 57,
+	MX6SLL_PAD_EPDC_PWR_CTRL1 = 58,
+	MX6SLL_PAD_EPDC_PWR_CTRL2 = 59,
+	MX6SLL_PAD_EPDC_PWR_CTRL3 = 60,
+	MX6SLL_PAD_EPDC_PWR_COM = 61,
+	MX6SLL_PAD_EPDC_PWR_INT = 62,
+	MX6SLL_PAD_EPDC_PWR_STAT = 63,
+	MX6SLL_PAD_EPDC_PWR_WAKE = 64,
+	MX6SLL_PAD_LCD_CLK = 65,
+	MX6SLL_PAD_LCD_ENABLE = 66,
+	MX6SLL_PAD_LCD_HSYNC = 67,
+	MX6SLL_PAD_LCD_VSYNC = 68,
+	MX6SLL_PAD_LCD_RESET = 69,
+	MX6SLL_PAD_LCD_DATA00 = 70,
+	MX6SLL_PAD_LCD_DATA01 = 71,
+	MX6SLL_PAD_LCD_DATA02 = 72,
+	MX6SLL_PAD_LCD_DATA03 = 73,
+	MX6SLL_PAD_LCD_DATA04 = 74,
+	MX6SLL_PAD_LCD_DATA05 = 75,
+	MX6SLL_PAD_LCD_DATA06 = 76,
+	MX6SLL_PAD_LCD_DATA07 = 77,
+	MX6SLL_PAD_LCD_DATA08 = 78,
+	MX6SLL_PAD_LCD_DATA09 = 79,
+	MX6SLL_PAD_LCD_DATA10 = 80,
+	MX6SLL_PAD_LCD_DATA11 = 81,
+	MX6SLL_PAD_LCD_DATA12 = 82,
+	MX6SLL_PAD_LCD_DATA13 = 83,
+	MX6SLL_PAD_LCD_DATA14 = 84,
+	MX6SLL_PAD_LCD_DATA15 = 85,
+	MX6SLL_PAD_LCD_DATA16 = 86,
+	MX6SLL_PAD_LCD_DATA17 = 87,
+	MX6SLL_PAD_LCD_DATA18 = 88,
+	MX6SLL_PAD_LCD_DATA19 = 89,
+	MX6SLL_PAD_LCD_DATA20 = 90,
+	MX6SLL_PAD_LCD_DATA21 = 91,
+	MX6SLL_PAD_LCD_DATA22 = 92,
+	MX6SLL_PAD_LCD_DATA23 = 93,
+	MX6SLL_PAD_AUD_RXFS = 94,
+	MX6SLL_PAD_AUD_RXC = 95,
+	MX6SLL_PAD_AUD_RXD = 96,
+	MX6SLL_PAD_AUD_TXC = 97,
+	MX6SLL_PAD_AUD_TXFS = 98,
+	MX6SLL_PAD_AUD_TXD = 99,
+	MX6SLL_PAD_AUD_MCLK = 100,
+	MX6SLL_PAD_UART1_RXD = 101,
+	MX6SLL_PAD_UART1_TXD = 102,
+	MX6SLL_PAD_I2C1_SCL = 103,
+	MX6SLL_PAD_I2C1_SDA = 104,
+	MX6SLL_PAD_I2C2_SCL = 105,
+	MX6SLL_PAD_I2C2_SDA = 106,
+	MX6SLL_PAD_ECSPI1_SCLK = 107,
+	MX6SLL_PAD_ECSPI1_MOSI = 108,
+	MX6SLL_PAD_ECSPI1_MISO = 109,
+	MX6SLL_PAD_ECSPI1_SS0 = 110,
+	MX6SLL_PAD_ECSPI2_SCLK = 111,
+	MX6SLL_PAD_ECSPI2_MOSI = 112,
+	MX6SLL_PAD_ECSPI2_MISO = 113,
+	MX6SLL_PAD_ECSPI2_SS0 = 114,
+	MX6SLL_PAD_SD1_CLK = 115,
+	MX6SLL_PAD_SD1_CMD = 116,
+	MX6SLL_PAD_SD1_DATA0 = 117,
+	MX6SLL_PAD_SD1_DATA1 = 118,
+	MX6SLL_PAD_SD1_DATA2 = 119,
+	MX6SLL_PAD_SD1_DATA3 = 120,
+	MX6SLL_PAD_SD1_DATA4 = 121,
+	MX6SLL_PAD_SD1_DATA5 = 122,
+	MX6SLL_PAD_SD1_DATA6 = 123,
+	MX6SLL_PAD_SD1_DATA7 = 124,
+	MX6SLL_PAD_SD2_RESET = 125,
+	MX6SLL_PAD_SD2_CLK = 126,
+	MX6SLL_PAD_SD2_CMD = 127,
+	MX6SLL_PAD_SD2_DATA0 = 128,
+	MX6SLL_PAD_SD2_DATA1 = 129,
+	MX6SLL_PAD_SD2_DATA2 = 130,
+	MX6SLL_PAD_SD2_DATA3 = 131,
+	MX6SLL_PAD_SD2_DATA4 = 132,
+	MX6SLL_PAD_SD2_DATA5 = 133,
+	MX6SLL_PAD_SD2_DATA6 = 134,
+	MX6SLL_PAD_SD2_DATA7 = 135,
+	MX6SLL_PAD_SD3_CLK = 136,
+	MX6SLL_PAD_SD3_CMD = 137,
+	MX6SLL_PAD_SD3_DATA0 = 138,
+	MX6SLL_PAD_SD3_DATA1 = 139,
+	MX6SLL_PAD_SD3_DATA2 = 140,
+	MX6SLL_PAD_SD3_DATA3 = 141,
+	MX6SLL_PAD_GPIO4_IO20 = 142,
+	MX6SLL_PAD_GPIO4_IO21 = 143,
+	MX6SLL_PAD_GPIO4_IO19 = 144,
+	MX6SLL_PAD_GPIO4_IO25 = 145,
+	MX6SLL_PAD_GPIO4_IO18 = 146,
+	MX6SLL_PAD_GPIO4_IO24 = 147,
+	MX6SLL_PAD_GPIO4_IO23 = 148,