Merge tag 'for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull power supply and reset updates from Sebastian Reichel:
 "Power-supply core:

   - Introduce "Bypass" charging type used by USB PPS standard

   - Refactor power_supply_set_input_current_limit_from_supplier()

   - Add fwnode support to power_supply_get_battery_info()

  Drivers:

   - ab8500: continue migrating towards using standard core APIs

   - axp288 fuel-gauge: refactor driver to be fully resource managed

   - battery-samsung-sdi: new in-kernel provider for (constant) Samsung
     battery info

   - bq24190: disable boost regulator on shutdown

   - bq24190: add support for battery-info on ACPI based systems

   - bq25890: prepare driver for usage on ACPI based systems

   - bq25890: add boost regulator support

   - cpcap-battery: add NVMEM based battery detection support

   - injoinic ip5xxx: new driver for power bank IC

   - upi ug3105: new battery driver

   - misc small improvements and fixes"

* tag 'for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (94 commits)
  power: ab8500_chargalg: Use CLOCK_MONOTONIC
  power: supply: Add a driver for Injoinic power bank ICs
  dt-bindings: trivial-devices: Add Injoinic power bank ICs
  dt-bindings: vendor-prefixes: Add Injoinic
  power: supply: ab8500: Remove unused variable
  power: supply: da9150-fg: Remove unnecessary print function dev_err()
  power: supply: ab8500: fix a handful of spelling mistakes
  power: supply: ab8500_fg: Account for line impedance
  dt-bindings: power: supply: ab8500_fg: Add line impedance
  power: supply: axp20x_usb_power: fix platform_get_irq.cocci warnings
  power: supply: axp20x_ac_power: fix platform_get_irq.cocci warning
  power: supply: wm8350-power: Add missing free in free_charger_irq
  power: supply: wm8350-power: Handle error for wm8350_register_irq
  power: supply: Static data for Samsung batteries
  power: supply: ab8500_fg: Use VBAT-to-Ri if possible
  power: supply: Support VBAT-to-Ri lookup tables
  power: supply: ab8500: Standardize BTI resistance
  power: supply: ab8500: Standardize alert mode charging
  power: supply: ab8500: Standardize maintenance charging
  power: supply: bq24190_charger: Delay applying charge_type changes when OTG 5V Vbus boost is on
  ...

41 files changed, 3796 insertions, 1423 deletions

diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig
index aab87c9b35c8..0d42e49105dd 100644
--- a/drivers/extcon/Kconfig
+++ b/drivers/extcon/Kconfig
@@ -61,6 +61,8 @@ config EXTCON_INTEL_INT3496
 config EXTCON_INTEL_CHT_WC
 	tristate "Intel Cherrytrail Whiskey Cove PMIC extcon driver"
 	depends on INTEL_SOC_PMIC_CHTWC
+	depends on USB_SUPPORT
+	select USB_ROLE_SWITCH
 	help
 	  Say Y here to enable extcon support for charger detection / control
 	  on the Intel Cherrytrail Whiskey Cove PMIC.
diff --git a/drivers/extcon/extcon-intel-cht-wc.c b/drivers/extcon/extcon-intel-cht-wc.c
index 771f6f4cf92e..89a6449e3f4a 100644
--- a/drivers/extcon/extcon-intel-cht-wc.c
+++ b/drivers/extcon/extcon-intel-cht-wc.c
@@ -14,8 +14,12 @@
 #include <linux/module.h>
 #include <linux/mod_devicetable.h>
 #include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/property.h>
 #include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
 #include <linux/slab.h>
+#include <linux/usb/role.h>
 
 #include "extcon-intel.h"
 
@@ -101,8 +105,13 @@ struct cht_wc_extcon_data {
 	struct device *dev;
 	struct regmap *regmap;
 	struct extcon_dev *edev;
+	struct usb_role_switch *role_sw;
+	struct regulator *vbus_boost;
+	struct power_supply *psy;
+	enum power_supply_usb_type usb_type;
 	unsigned int previous_cable;
 	bool usb_host;
+	bool vbus_boost_enabled;
 };
 
 static int cht_wc_extcon_get_id(struct cht_wc_extcon_data *ext, int pwrsrc_sts)
@@ -112,13 +121,21 @@ static int cht_wc_extcon_get_id(struct cht_wc_extcon_data *ext, int pwrsrc_sts)
 		return INTEL_USB_ID_GND;
 	case CHT_WC_PWRSRC_RID_FLOAT:
 		return INTEL_USB_ID_FLOAT;
+	/*
+	 * According to the spec. we should read the USB-ID pin ADC value here
+	 * to determine the resistance of the used pull-down resister and then
+	 * return RID_A / RID_B / RID_C based on this. But all "Accessory
+	 * Charger Adapter"s (ACAs) which users can actually buy always use
+	 * a combination of a charging port with one or more USB-A ports, so
+	 * they should always use a resistor indicating RID_A. But the spec
+	 * is hard to read / badly-worded so some of them actually indicate
+	 * they are a RID_B ACA evnen though they clearly are a RID_A ACA.
+	 * To workaround this simply always return INTEL_USB_RID_A, which
+	 * matches all the ACAs which users can actually buy.
+	 */
 	case CHT_WC_PWRSRC_RID_ACA:
+		return INTEL_USB_RID_A;
 	default:
-		/*
-		 * Once we have IIO support for the GPADC we should read
-		 * the USBID GPADC channel here and determine ACA role
-		 * based on that.
-		 */
 		return INTEL_USB_ID_FLOAT;
 	}
 }
@@ -147,14 +164,15 @@ static int cht_wc_extcon_get_charger(struct cht_wc_extcon_data *ext,
 	} while (time_before(jiffies, timeout));
 
 	if (status != CHT_WC_USBSRC_STS_SUCCESS) {
-		if (ignore_errors)
-			return EXTCON_CHG_USB_SDP; /* Save fallback */
+		if (!ignore_errors) {
+			if (status == CHT_WC_USBSRC_STS_FAIL)
+				dev_warn(ext->dev, "Could not detect charger type\n");
+			else
+				dev_warn(ext->dev, "Timeout detecting charger type\n");
+		}
 
-		if (status == CHT_WC_USBSRC_STS_FAIL)
-			dev_warn(ext->dev, "Could not detect charger type\n");
-		else
-			dev_warn(ext->dev, "Timeout detecting charger type\n");
-		return EXTCON_CHG_USB_SDP; /* Save fallback */
+		/* Safe fallback */
+		usbsrc = CHT_WC_USBSRC_TYPE_SDP << CHT_WC_USBSRC_TYPE_SHIFT;
 	}
 
 	usbsrc = (usbsrc & CHT_WC_USBSRC_TYPE_MASK) >> CHT_WC_USBSRC_TYPE_SHIFT;
@@ -163,18 +181,23 @@ static int cht_wc_extcon_get_charger(struct cht_wc_extcon_data *ext,
 		dev_warn(ext->dev,
 			"Unhandled charger type %d, defaulting to SDP\n",
 			 ret);
+		ext->usb_type = POWER_SUPPLY_USB_TYPE_SDP;
 		return EXTCON_CHG_USB_SDP;
 	case CHT_WC_USBSRC_TYPE_SDP:
 	case CHT_WC_USBSRC_TYPE_FLOATING:
 	case CHT_WC_USBSRC_TYPE_OTHER:
+		ext->usb_type = POWER_SUPPLY_USB_TYPE_SDP;
 		return EXTCON_CHG_USB_SDP;
 	case CHT_WC_USBSRC_TYPE_CDP:
+		ext->usb_type = POWER_SUPPLY_USB_TYPE_CDP;
 		return EXTCON_CHG_USB_CDP;
 	case CHT_WC_USBSRC_TYPE_DCP:
 	case CHT_WC_USBSRC_TYPE_DCP_EXTPHY:
 	case CHT_WC_USBSRC_TYPE_MHL: /* MHL2+ delivers upto 2A, treat as DCP */
+		ext->usb_type = POWER_SUPPLY_USB_TYPE_DCP;
 		return EXTCON_CHG_USB_DCP;
 	case CHT_WC_USBSRC_TYPE_ACA:
+		ext->usb_type = POWER_SUPPLY_USB_TYPE_ACA;
 		return EXTCON_CHG_USB_ACA;
 	}
 }
@@ -216,6 +239,18 @@ static void cht_wc_extcon_set_otgmode(struct cht_wc_extcon_data *ext,
 				 CHT_WC_CHGRCTRL1_OTGMODE, val);
 	if (ret)
 		dev_err(ext->dev, "Error updating CHGRCTRL1 reg: %d\n", ret);
+
+	if (ext->vbus_boost && ext->vbus_boost_enabled != enable) {
+		if (enable)
+			ret = regulator_enable(ext->vbus_boost);
+		else
+			ret = regulator_disable(ext->vbus_boost);
+
+		if (ret)
+			dev_err(ext->dev, "Error updating Vbus boost regulator: %d\n", ret);
+		else
+			ext->vbus_boost_enabled = enable;
+	}
 }
 
 static void cht_wc_extcon_enable_charging(struct cht_wc_extcon_data *ext,
@@ -245,6 +280,9 @@ static void cht_wc_extcon_pwrsrc_event(struct cht_wc_extcon_data *ext)
 	unsigned int cable = EXTCON_NONE;
 	/* Ignore errors in host mode, as the 5v boost converter is on then */
 	bool ignore_get_charger_errors = ext->usb_host;
+	enum usb_role role;
+
+	ext->usb_type = POWER_SUPPLY_USB_TYPE_UNKNOWN;
 
 	ret = regmap_read(ext->regmap, CHT_WC_PWRSRC_STS, &pwrsrc_sts);
 	if (ret) {
@@ -288,6 +326,21 @@ set_state:
 
 	ext->usb_host = ((id == INTEL_USB_ID_GND) || (id == INTEL_USB_RID_A));
 	extcon_set_state_sync(ext->edev, EXTCON_USB_HOST, ext->usb_host);
+
+	if (ext->usb_host)
+		role = USB_ROLE_HOST;
+	else if (pwrsrc_sts & CHT_WC_PWRSRC_VBUS)
+		role = USB_ROLE_DEVICE;
+	else
+		role = USB_ROLE_NONE;
+
+	/* Note: this is a no-op when ext->role_sw is NULL */
+	ret = usb_role_switch_set_role(ext->role_sw, role);
+	if (ret)
+		dev_err(ext->dev, "Error setting USB-role: %d\n", ret);
+
+	if (ext->psy)
+		power_supply_changed(ext->psy);
 }
 
 static irqreturn_t cht_wc_extcon_isr(int irq, void *data)
@@ -333,6 +386,114 @@ static int cht_wc_extcon_sw_control(struct cht_wc_extcon_data *ext, bool enable)
 	return ret;
 }
 
+static int cht_wc_extcon_find_role_sw(struct cht_wc_extcon_data *ext)
+{
+	const struct software_node *swnode;
+	struct fwnode_handle *fwnode;
+
+	swnode = software_node_find_by_name(NULL, "intel-xhci-usb-sw");
+	if (!swnode)
+		return -EPROBE_DEFER;
+
+	fwnode = software_node_fwnode(swnode);
+	ext->role_sw = usb_role_switch_find_by_fwnode(fwnode);
+	fwnode_handle_put(fwnode);
+
+	return ext->role_sw ? 0 : -EPROBE_DEFER;
+}
+
+static void cht_wc_extcon_put_role_sw(void *data)
+{
+	struct cht_wc_extcon_data *ext = data;
+
+	usb_role_switch_put(ext->role_sw);
+}
+
+/* Some boards require controlling the role-sw and Vbus based on the id-pin */
+static int cht_wc_extcon_get_role_sw_and_regulator(struct cht_wc_extcon_data *ext)
+{
+	int ret;
+
+	ret = cht_wc_extcon_find_role_sw(ext);
+	if (ret)
+		return ret;
+
+	ret = devm_add_action_or_reset(ext->dev, cht_wc_extcon_put_role_sw, ext);
+	if (ret)
+		return ret;
+
+	/*
+	 * On x86/ACPI platforms the regulator <-> consumer link is provided
+	 * by platform_data passed to the regulator driver. This means that
+	 * this info is not available before the regulator driver has bound.
+	 * Use devm_regulator_get_optional() to avoid getting a dummy
+	 * regulator and wait for the regulator to show up if necessary.
+	 */
+	ext->vbus_boost = devm_regulator_get_optional(ext->dev, "vbus");
+	if (IS_ERR(ext->vbus_boost)) {
+		ret = PTR_ERR(ext->vbus_boost);
+		if (ret == -ENODEV)
+			ret = -EPROBE_DEFER;
+
+		return dev_err_probe(ext->dev, ret, "getting Vbus regulator");
+	}
+
+	return 0;
+}
+
+static int cht_wc_extcon_psy_get_prop(struct power_supply *psy,
+				      enum power_supply_property psp,
+				      union power_supply_propval *val)
+{
+	struct cht_wc_extcon_data *ext = power_supply_get_drvdata(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_USB_TYPE:
+		val->intval = ext->usb_type;
+		break;
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = ext->usb_type ? 1 : 0;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static const enum power_supply_usb_type cht_wc_extcon_psy_usb_types[] = {
+	POWER_SUPPLY_USB_TYPE_SDP,
+	POWER_SUPPLY_USB_TYPE_CDP,
+	POWER_SUPPLY_USB_TYPE_DCP,
+	POWER_SUPPLY_USB_TYPE_ACA,
+	POWER_SUPPLY_USB_TYPE_UNKNOWN,
+};
+
+static const enum power_supply_property cht_wc_extcon_psy_props[] = {
+	POWER_SUPPLY_PROP_USB_TYPE,
+	POWER_SUPPLY_PROP_ONLINE,
+};
+
+static const struct power_supply_desc cht_wc_extcon_psy_desc = {
+	.name = "cht_wcove_pwrsrc",
+	.type = POWER_SUPPLY_TYPE_USB,
+	.usb_types = cht_wc_extcon_psy_usb_types,
+	.num_usb_types = ARRAY_SIZE(cht_wc_extcon_psy_usb_types),
+	.properties = cht_wc_extcon_psy_props,
+	.num_properties = ARRAY_SIZE(cht_wc_extcon_psy_props),
+	.get_property = cht_wc_extcon_psy_get_prop,
+};
+
+static int cht_wc_extcon_register_psy(struct cht_wc_extcon_data *ext)
+{
+	struct power_supply_config psy_cfg = { .drv_data = ext };
+
+	ext->psy = devm_power_supply_register(ext->dev,
+					      &cht_wc_extcon_psy_desc,
+					      &psy_cfg);
+	return PTR_ERR_OR_ZERO(ext->psy);
+}
+
 static int cht_wc_extcon_probe(struct platform_device *pdev)
 {
 	struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent);
@@ -358,20 +519,47 @@ static int cht_wc_extcon_probe(struct platform_device *pdev)
 	if (IS_ERR(ext->edev))
 		return PTR_ERR(ext->edev);
 
-	/*
-	 * When a host-cable is detected the BIOS enables an external 5v boost
-	 * converter to power connected devices there are 2 problems with this:
-	 * 1) This gets seen by the external battery charger as a valid Vbus
-	 *    supply and it then tries to feed Vsys from this creating a
-	 *    feedback loop which causes aprox. 300 mA extra battery drain
-	 *    (and unless we drive the external-charger-disable pin high it
-	 *    also tries to charge the battery causing even more feedback).
-	 * 2) This gets seen by the pwrsrc block as a SDP USB Vbus supply
-	 * Since the external battery charger has its own 5v boost converter
-	 * which does not have these issues, we simply turn the separate
-	 * external 5v boost converter off and leave it off entirely.
-	 */
-	cht_wc_extcon_set_5v_boost(ext, false);
+	switch (pmic->cht_wc_model) {
+	case INTEL_CHT_WC_GPD_WIN_POCKET:
+		/*
+		 * When a host-cable is detected the BIOS enables an external 5v boost
+		 * converter to power connected devices there are 2 problems with this:
+		 * 1) This gets seen by the external battery charger as a valid Vbus
+		 *    supply and it then tries to feed Vsys from this creating a
+		 *    feedback loop which causes aprox. 300 mA extra battery drain
+		 *    (and unless we drive the external-charger-disable pin high it
+		 *    also tries to charge the battery causing even more feedback).
+		 * 2) This gets seen by the pwrsrc block as a SDP USB Vbus supply
+		 * Since the external battery charger has its own 5v boost converter
+		 * which does not have these issues, we simply turn the separate
+		 * external 5v boost converter off and leave it off entirely.
+		 */
+		cht_wc_extcon_set_5v_boost(ext, false);
+		break;
+	case INTEL_CHT_WC_LENOVO_YOGABOOK1:
+		/* Do this first, as it may very well return -EPROBE_DEFER. */
+		ret = cht_wc_extcon_get_role_sw_and_regulator(ext);
+		if (ret)
+			return ret;
+		/*
+		 * The bq25890 used here relies on this driver's BC-1.2 charger
+		 * detection, and the bq25890 driver expect this info to be
+		 * available through a parent power_supply class device which
+		 * models the detected charger (idem to how the Type-C TCPM code
+		 * registers a power_supply classdev for the connected charger).
+		 */
+		ret = cht_wc_extcon_register_psy(ext);
+		if (ret)
+			return ret;
+		break;
+	case INTEL_CHT_WC_XIAOMI_MIPAD2:
+		ret = cht_wc_extcon_get_role_sw_and_regulator(ext);
+		if (ret)
+			return ret;
+		break;
+	default:
+		break;
+	}
 
 	/* Enable sw control */
 	ret = cht_wc_extcon_sw_control(ext, true);
diff --git a/drivers/i2c/busses/i2c-cht-wc.c b/drivers/i2c/busses/i2c-cht-wc.c
index 1cf68f85b2e1..54e909f9eab6 100644
--- a/drivers/i2c/busses/i2c-cht-wc.c
+++ b/drivers/i2c/busses/i2c-cht-wc.c
@@ -18,6 +18,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/power/bq24190_charger.h>
+#include <linux/power/bq25890_charger.h>
 #include <linux/slab.h>
 
 #define CHT_WC_I2C_CTRL			0x5e24
@@ -270,6 +271,7 @@ static const struct irq_chip cht_wc_i2c_irq_chip = {
 	.name			= "cht_wc_ext_chrg_irq_chip",
 };
 
+/********** GPD Win / Pocket charger IC settings **********/
 static const char * const bq24190_suppliers[] = {
 	"tcpm-source-psy-i2c-fusb302" };
 
@@ -304,17 +306,92 @@ static struct bq24190_platform_data bq24190_pdata = {
 	.regulator_init_data = &bq24190_vbus_init_data,
 };
 
+static struct i2c_board_info gpd_win_board_info = {
+	.type = "bq24190",
+	.addr = 0x6b,
+	.dev_name = "bq24190",
+	.swnode = &bq24190_node,
+	.platform_data = &bq24190_pdata,
+};
+
+/********** Xiaomi Mi Pad 2 charger IC settings  **********/
+static struct regulator_consumer_supply bq2589x_vbus_consumer = {
+	.supply = "vbus",
+	.dev_name = "cht_wcove_pwrsrc",
+};
+
+static const struct regulator_init_data bq2589x_vbus_init_data = {
+	.constraints = {
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.consumer_supplies = &bq2589x_vbus_consumer,
+	.num_consumer_supplies = 1,
+};
+
+static struct bq25890_platform_data bq2589x_pdata = {
+	.regulator_init_data = &bq2589x_vbus_init_data,
+};
+
+static const struct property_entry xiaomi_mipad2_props[] = {
+	PROPERTY_ENTRY_BOOL("linux,skip-reset"),
+	PROPERTY_ENTRY_BOOL("linux,read-back-settings"),
+	{ }
+};
+
+static const struct software_node xiaomi_mipad2_node = {
+	.properties = xiaomi_mipad2_props,
+};
+
+static struct i2c_board_info xiaomi_mipad2_board_info = {
+	.type = "bq25890",
+	.addr = 0x6a,
+	.dev_name = "bq25890",
+	.swnode = &xiaomi_mipad2_node,
+	.platform_data = &bq2589x_pdata,
+};
+
+/********** Lenovo Yogabook YB1-X90F/-X91F/-X91L charger settings **********/
+static const char * const lenovo_yb1_bq25892_suppliers[] = { "cht_wcove_pwrsrc" };
+
+static const struct property_entry lenovo_yb1_bq25892_props[] = {
+	PROPERTY_ENTRY_STRING_ARRAY("supplied-from",
+				    lenovo_yb1_bq25892_suppliers),
+	PROPERTY_ENTRY_U32("linux,pump-express-vbus-max", 12000000),
+	PROPERTY_ENTRY_BOOL("linux,skip-reset"),
+	/*
+	 * The firmware sets everything to the defaults, which leads to a
+	 * somewhat low charge-current of 2048mA and worse to a battery-voltage
+	 * of 4.2V instead of 4.35V (when booted without a charger connected).
+	 * Use our own values instead of "linux,read-back-settings" to fix this.
+	 */
+	PROPERTY_ENTRY_U32("ti,charge-current", 4224000),
+	PROPERTY_ENTRY_U32("ti,battery-regulation-voltage", 4352000),
+	PROPERTY_ENTRY_U32("ti,termination-current", 256000),
+	PROPERTY_ENTRY_U32("ti,precharge-current", 128000),
+	PROPERTY_ENTRY_U32("ti,minimum-sys-voltage", 3500000),
+	PROPERTY_ENTRY_U32("ti,boost-voltage", 4998000),
+	PROPERTY_ENTRY_U32("ti,boost-max-current", 1400000),
+	PROPERTY_ENTRY_BOOL("ti,use-ilim-pin"),
+	{ }
+};
+
+static const struct software_node lenovo_yb1_bq25892_node = {
+	.properties = lenovo_yb1_bq25892_props,
+};
+
+static struct i2c_board_info lenovo_yogabook1_board_info = {
+	.type = "bq25892",
+	.addr = 0x6b,
+	.dev_name = "bq25892",
+	.swnode = &lenovo_yb1_bq25892_node,
+	.platform_data = &bq2589x_pdata,
+};
+
 static int cht_wc_i2c_adap_i2c_probe(struct platform_device *pdev)
 {
 	struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent);
+	struct i2c_board_info *board_info = NULL;
 	struct cht_wc_i2c_adap *adap;
-	struct i2c_board_info board_info = {
-		.type = "bq24190",
-		.addr = 0x6b,
-		.dev_name = "bq24190",
-		.swnode = &bq24190_node,
-		.platform_data = &bq24190_pdata,
-	};
 	int ret, reg, irq;
 
 	irq = platform_get_irq(pdev, 0);
@@ -379,17 +456,24 @@ static int cht_wc_i2c_adap_i2c_probe(struct platform_device *pdev)
 	if (ret)
 		goto remove_irq_domain;
 
-	/*
-	 * Normally the Whiskey Cove PMIC is paired with a TI bq24292i charger,
-	 * connected to this i2c bus, and a max17047 fuel-gauge and a fusb302
-	 * USB Type-C controller connected to another i2c bus. In this setup
-	 * the max17047 and fusb302 devices are enumerated through an INT33FE
-	 * ACPI device. If this device is present register an i2c-client for
-	 * the TI bq24292i charger.
-	 */
-	if (acpi_dev_present("INT33FE", NULL, -1)) {
-		board_info.irq = adap->client_irq;
-		adap->client = i2c_new_client_device(&adap->adapter, &board_info);
+	switch (pmic->cht_wc_model) {
+	case INTEL_CHT_WC_GPD_WIN_POCKET:
+		board_info = &gpd_win_board_info;
+		break;
+	case INTEL_CHT_WC_XIAOMI_MIPAD2:
+		board_info = &xiaomi_mipad2_board_info;
+		break;
+	case INTEL_CHT_WC_LENOVO_YOGABOOK1:
+		board_info = &lenovo_yogabook1_board_info;
+		break;
+	default:
+		dev_warn(&pdev->dev, "Unknown model, not instantiating charger device\n");
+		break;
+	}
+
+	if (board_info) {
+		board_info->irq = adap->client_irq;
+		adap->client = i2c_new_client_device(&adap->adapter, board_info);
 		if (IS_ERR(adap->client)) {
 			ret = PTR_ERR(adap->client);
 			goto del_adapter;
diff --git a/drivers/mfd/intel_soc_pmic_chtwc.c b/drivers/mfd/intel_soc_pmic_chtwc.c
index 49c5f71664bc..4eab191e053a 100644
--- a/drivers/mfd/intel_soc_pmic_chtwc.c
+++ b/drivers/mfd/intel_soc_pmic_chtwc.c
@@ -10,6 +10,7 @@
 
 #include <linux/acpi.h>
 #include <linux/delay.h>
+#include <linux/dmi.h>
 #include <linux/err.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
@@ -134,9 +135,44 @@ static const struct regmap_irq_chip cht_wc_regmap_irq_chip = {
 	.num_regs = 1,
 };
 
+static const struct dmi_system_id cht_wc_model_dmi_ids[] = {
+	{
+		/* GPD win / GPD pocket mini laptops */
+		.driver_data = (void *)(long)INTEL_CHT_WC_GPD_WIN_POCKET,
+		/*
+		 * This DMI match may not seem unique, but it is. In the 67000+
+		 * DMI decode dumps from linux-hardware.org only 116 have
+		 * board_vendor set to "AMI Corporation" and of those 116 only
+		 * the GPD win's and pocket's board_name is "Default string".
+		 */
+		.matches = {
+			DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
+			DMI_EXACT_MATCH(DMI_BOARD_NAME, "Default string"),
+			DMI_EXACT_MATCH(DMI_BOARD_SERIAL, "Default string"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Default string"),
+		},
+	}, {
+		/* Xiaomi Mi Pad 2 */
+		.driver_data = (void *)(long)INTEL_CHT_WC_XIAOMI_MIPAD2,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Xiaomi Inc"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Mipad2"),
+		},
+	}, {
+		/* Lenovo Yoga Book X90F / X91F / X91L */
+		.driver_data = (void *)(long)INTEL_CHT_WC_LENOVO_YOGABOOK1,
+		.matches = {
+			/* Non exact match to match all versions */
+			DMI_MATCH(DMI_PRODUCT_NAME, "Lenovo YB1-X9"),
+		},
+	},
+	{ }
+};
+
 static int cht_wc_probe(struct i2c_client *client)
 {
 	struct device *dev = &client->dev;
+	const struct dmi_system_id *id;
 	struct intel_soc_pmic *pmic;
 	acpi_status status;
 	unsigned long long hrv;
@@ -160,6 +196,10 @@ static int cht_wc_probe(struct i2c_client *client)
 	if (!pmic)
 		return -ENOMEM;
 
+	id = dmi_first_match(cht_wc_model_dmi_ids);
+	if (id)
+		pmic->cht_wc_model = (long)id->driver_data;
+
 	pmic->irq = client->irq;
 	pmic->dev = dev;
 	i2c_set_clientdata(client, pmic);
diff --git a/drivers/power/reset/gemini-poweroff.c b/drivers/power/reset/gemini-poweroff.c
index 90e35c07240a..b7f7a8225f22 100644
--- a/drivers/power/reset/gemini-poweroff.c
+++ b/drivers/power/reset/gemini-poweroff.c
@@ -107,8 +107,8 @@ static int gemini_poweroff_probe(struct platform_device *pdev)
 		return PTR_ERR(gpw->base);
 
 	irq = platform_get_irq(pdev, 0);
-	if (!irq)
-		return -EINVAL;
+	if (irq < 0)
+		return irq;
 
 	gpw->dev = dev;
 
diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
index b366e2fd8e97..1aa8323ad9f6 100644
--- a/drivers/power/supply/Kconfig
+++ b/drivers/power/supply/Kconfig
@@ -51,6 +51,14 @@ config GENERIC_ADC_BATTERY
 	  Say Y here to enable support for the generic battery driver
 	  which uses IIO framework to read adc.
 
+config IP5XXX_POWER
+	tristate "Injoinic IP5xxx power bank IC driver"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Say Y to include support for Injoinic IP5xxx power bank ICs,
+	  which include a battery charger and a boost converter.
+
 config MAX8925_POWER
 	tristate "MAX8925 battery charger support"
 	depends on MFD_MAX8925
@@ -181,6 +189,12 @@ config BATTERY_OLPC
 	help
 	  Say Y to enable support for the battery on the OLPC laptop.
 
+config BATTERY_SAMSUNG_SDI
+	bool "Samsung SDI batteries"
+	help
+	  Say Y to enable support for Samsung SDI battery data.
+	  These batteries are used in Samsung mobile phones.
+
 config BATTERY_TOSA
 	tristate "Sharp SL-6000 (tosa) battery"
 	depends on MACH_TOSA && MFD_TC6393XB && TOUCHSCREEN_WM97XX
@@ -351,14 +365,14 @@ config AXP20X_POWER
 
 config AXP288_CHARGER
 	tristate "X-Powers AXP288 Charger"
-	depends on MFD_AXP20X && EXTCON_AXP288 && IOSF_MBI
+	depends on MFD_AXP20X && EXTCON_AXP288 && IOSF_MBI && ACPI
 	help
 	  Say yes here to have support X-Power AXP288 power management IC (PMIC)
 	  integrated charger.
 
 config AXP288_FUEL_GAUGE
 	tristate "X-Powers AXP288 Fuel Gauge"
-	depends on MFD_AXP20X && IIO && IOSF_MBI
+	depends on MFD_AXP20X && IIO && IOSF_MBI && ACPI
 	help
 	  Say yes here to have support for X-Power power management IC (PMIC)
 	  Fuel Gauge. The device provides battery statistics and status
@@ -728,6 +742,8 @@ config BATTERY_GAUGE_LTC2941
 config AB8500_BM
 	bool "AB8500 Battery Management Driver"
 	depends on AB8500_CORE && AB8500_GPADC && (IIO = y) && OF
+	select THERMAL
+	select THERMAL_OF
 	help
 	  Say Y to include support for AB8500 battery management.
 
@@ -866,4 +882,19 @@ config CHARGER_SURFACE