Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Olof Johansson:
 "This branch contains platform-related driver updates for ARM and ARM64.

  Among them:

   - Reset driver updates:
     + New API for dealing with arrays of resets
     + Make unimplemented {de,}assert return success on shared resets
     + MSDKv1 driver
     + Removal of obsolete Gemini reset driver
     + Misc updates for sunxi and Uniphier

   - SoC drivers:
     + Platform SoC driver registration on Tegra
     + Shuffle of Qualcomm drivers into a submenu
     + Allwinner A64 support for SRAM
     + Renesas R-Car R3 support
     + Power domains for Rockchip RK3366

   - Misc updates and smaller fixes for TEE and memory driver
     subsystems"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits)
  firmware: arm_scpi: fix endianness of dev_id in struct dev_pstate_set
  soc/tegra: fuse: Add missing semi-colon
  soc/tegra: Restrict SoC device registration to Tegra
  drivers: soc: sunxi: add support for A64 and its SRAM C
  drivers: soc: sunxi: add support for remapping func value to reg value
  drivers: soc: sunxi: fix error processing on base address when claiming
  dt-bindings: add binding for Allwinner A64 SRAM controller and SRAM C
  bus: sunxi-rsb: Enable by default for ARM64
  soc/tegra: Register SoC device
  firmware: tegra: set drvdata earlier
  memory: Convert to using %pOF instead of full_name
  soc: Convert to using %pOF instead of full_name
  bus: Convert to using %pOF instead of full_name
  firmware: Convert to using %pOF instead of full_name
  soc: mediatek: add SCPSYS power domain driver for MediaTek MT7622 SoC
  soc: mediatek: add header files required for MT7622 SCPSYS dt-binding
  soc: mediatek: reduce code duplication of scpsys_probe across all SoCs
  dt-bindings: soc: update the binding document for SCPSYS on MediaTek MT7622 SoC
  reset: uniphier: add analog amplifiers reset control
  reset: uniphier: add video input subsystem reset control
  ...

54 files changed, 1102 insertions, 430 deletions

diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
index 2408ea38a39c..ae3d8f3444b9 100644
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -132,7 +132,7 @@ config SIMPLE_PM_BUS
 
 config SUNXI_RSB
 	tristate "Allwinner sunXi Reduced Serial Bus Driver"
-	  default MACH_SUN8I || MACH_SUN9I
+	  default MACH_SUN8I || MACH_SUN9I || ARM64
 	  depends on ARCH_SUNXI
 	  select REGMAP
 	  help
diff --git a/drivers/bus/arm-cci.c b/drivers/bus/arm-cci.c
index c49da15d9790..3c29d36702a8 100644
--- a/drivers/bus/arm-cci.c
+++ b/drivers/bus/arm-cci.c
@@ -2124,8 +2124,8 @@ int notrace __cci_control_port_by_device(struct device_node *dn, bool enable)
 		return -ENODEV;
 
 	port = __cci_ace_get_port(dn, ACE_LITE_PORT);
-	if (WARN_ONCE(port < 0, "node %s ACE lite port look-up failure\n",
-				dn->full_name))
+	if (WARN_ONCE(port < 0, "node %pOF ACE lite port look-up failure\n",
+				dn))
 		return -ENODEV;
 	cci_port_control(port, enable);
 	return 0;
@@ -2200,14 +2200,14 @@ static int cci_probe_ports(struct device_node *np)
 
 		if (of_property_read_string(cp, "interface-type",
 					&match_str)) {
-			WARN(1, "node %s missing interface-type property\n",
-				  cp->full_name);
+			WARN(1, "node %pOF missing interface-type property\n",
+				  cp);
 			continue;
 		}
 		is_ace = strcmp(match_str, "ace") == 0;
 		if (!is_ace && strcmp(match_str, "ace-lite")) {
-			WARN(1, "node %s containing invalid interface-type property, skipping it\n",
-					cp->full_name);
+			WARN(1, "node %pOF containing invalid interface-type property, skipping it\n",
+					cp);
 			continue;
 		}
 
diff --git a/drivers/bus/imx-weim.c b/drivers/bus/imx-weim.c
index 4bd361d64270..3d56ebcda720 100644
--- a/drivers/bus/imx-weim.c
+++ b/drivers/bus/imx-weim.c
@@ -156,8 +156,8 @@ static int __init weim_parse_dt(struct platform_device *pdev,
 
 		ret = weim_timing_setup(child, base, devtype);
 		if (ret)
-			dev_warn(&pdev->dev, "%s set timing failed.\n",
-				child->full_name);
+			dev_warn(&pdev->dev, "%pOF set timing failed.\n",
+				child);
 		else
 			have_child = 1;
 	}
@@ -166,8 +166,8 @@ static int __init weim_parse_dt(struct platform_device *pdev,
 		ret = of_platform_default_populate(pdev->dev.of_node,
 						   NULL, &pdev->dev);
 	if (ret)
-		dev_err(&pdev->dev, "%s fail to create devices.\n",
-			pdev->dev.of_node->full_name);
+		dev_err(&pdev->dev, "%pOF fail to create devices.\n",
+			pdev->dev.of_node);
 	return ret;
 }
 
diff --git a/drivers/bus/sunxi-rsb.c b/drivers/bus/sunxi-rsb.c
index 795c9d9c96a6..328ca93781cf 100644
--- a/drivers/bus/sunxi-rsb.c
+++ b/drivers/bus/sunxi-rsb.c
@@ -556,20 +556,20 @@ static int of_rsb_register_devices(struct sunxi_rsb *rsb)
 
 	/* Runtime addresses for all slaves should be set first */
 	for_each_available_child_of_node(np, child) {
-		dev_dbg(dev, "setting child %s runtime address\n",
-			child->full_name);
+		dev_dbg(dev, "setting child %pOF runtime address\n",
+			child);
 
 		ret = of_property_read_u32(child, "reg", &hwaddr);
 		if (ret) {
-			dev_err(dev, "%s: invalid 'reg' property: %d\n",
-				child->full_name, ret);
+			dev_err(dev, "%pOF: invalid 'reg' property: %d\n",
+				child, ret);
 			continue;
 		}
 
 		rtaddr = sunxi_rsb_get_rtaddr(hwaddr);
 		if (!rtaddr) {
-			dev_err(dev, "%s: unknown hardware device address\n",
-				child->full_name);
+			dev_err(dev, "%pOF: unknown hardware device address\n",
+				child);
 			continue;
 		}
 
@@ -586,15 +586,15 @@ static int of_rsb_register_devices(struct sunxi_rsb *rsb)
 		/* send command */
 		ret = _sunxi_rsb_run_xfer(rsb);
 		if (ret)
-			dev_warn(dev, "%s: set runtime address failed: %d\n",
-				 child->full_name, ret);
+			dev_warn(dev, "%pOF: set runtime address failed: %d\n",
+				 child, ret);
 	}
 
 	/* Then we start adding devices and probing them */
 	for_each_available_child_of_node(np, child) {
 		struct sunxi_rsb_device *rdev;
 
-		dev_dbg(dev, "adding child %s\n", child->full_name);
+		dev_dbg(dev, "adding child %pOF\n", child);
 
 		ret = of_property_read_u32(child, "reg", &hwaddr);
 		if (ret)
@@ -606,8 +606,8 @@ static int of_rsb_register_devices(struct sunxi_rsb *rsb)
 
 		rdev = sunxi_rsb_device_create(rsb, child, hwaddr, rtaddr);
 		if (IS_ERR(rdev))
-			dev_err(dev, "failed to add child device %s: %ld\n",
-				child->full_name, PTR_ERR(rdev));
+			dev_err(dev, "failed to add child device %pOF: %ld\n",
+				child, PTR_ERR(rdev));
 	}
 
 	return 0;
diff --git a/drivers/firmware/arm_scpi.c b/drivers/firmware/arm_scpi.c
index 8043e51de897..7da9f1b83ebe 100644
--- a/drivers/firmware/arm_scpi.c
+++ b/drivers/firmware/arm_scpi.c
@@ -357,7 +357,7 @@ struct sensor_value {
 } __packed;
 
 struct dev_pstate_set {
-	u16 dev_id;
+	__le16 dev_id;
 	u8 pstate;
 } __packed;
 
@@ -965,7 +965,7 @@ static int scpi_probe(struct platform_device *pdev)
 
 	count = of_count_phandle_with_args(np, "mboxes", "#mbox-cells");
 	if (count < 0) {
-		dev_err(dev, "no mboxes property in '%s'\n", np->full_name);
+		dev_err(dev, "no mboxes property in '%pOF'\n", np);
 		return -ENODEV;
 	}
 
diff --git a/drivers/firmware/psci.c b/drivers/firmware/psci.c
index 493a56a4cfc4..d687ca3d5049 100644
--- a/drivers/firmware/psci.c
+++ b/drivers/firmware/psci.c
@@ -280,8 +280,8 @@ static int psci_dt_cpu_init_idle(struct device_node *cpu_node, int cpu)
 					   "arm,psci-suspend-param",
 					   &state);
 		if (ret) {
-			pr_warn(" * %s missing arm,psci-suspend-param property\n",
-				state_node->full_name);
+			pr_warn(" * %pOF missing arm,psci-suspend-param property\n",
+				state_node);
 			of_node_put(state_node);
 			goto free_mem;
 		}
diff --git a/drivers/firmware/tegra/bpmp.c b/drivers/firmware/tegra/bpmp.c
index b25179517cc5..73ca55b7b7ec 100644
--- a/drivers/firmware/tegra/bpmp.c
+++ b/drivers/firmware/tegra/bpmp.c
@@ -806,6 +806,8 @@ static int tegra_bpmp_probe(struct platform_device *pdev)
 
 	dev_info(&pdev->dev, "firmware: %s\n", tag);
 
+	platform_set_drvdata(pdev, bpmp);
+
 	err = of_platform_default_populate(pdev->dev.of_node, NULL, &pdev->dev);
 	if (err < 0)
 		goto free_mrq;
@@ -822,8 +824,6 @@ static int tegra_bpmp_probe(struct platform_device *pdev)
 	if (err < 0)
 		goto free_mrq;
 
-	platform_set_drvdata(pdev, bpmp);
-
 	return 0;
 
 free_mrq:
diff --git a/drivers/memory/atmel-ebi.c b/drivers/memory/atmel-ebi.c
index c00a7c7f460a..b907865d4664 100644
--- a/drivers/memory/atmel-ebi.c
+++ b/drivers/memory/atmel-ebi.c
@@ -159,8 +159,8 @@ static int atmel_ebi_xslate_smc_timings(struct atmel_ebi_dev *ebid,
 out:
 	if (ret) {
 		dev_err(ebid->ebi->dev,
-			"missing or invalid timings definition in %s",
-			np->full_name);
+			"missing or invalid timings definition in %pOF",
+			np);
 		return ret;
 	}
 
@@ -270,8 +270,8 @@ static int atmel_ebi_xslate_smc_config(struct atmel_ebi_dev *ebid,
 		return -EINVAL;
 
 	if ((ret > 0 && !required) || (!ret && required)) {
-		dev_err(ebid->ebi->dev, "missing atmel,smc- properties in %s",
-			np->full_name);
+		dev_err(ebid->ebi->dev, "missing atmel,smc- properties in %pOF",
+			np);
 		return -EINVAL;
 	}
 
@@ -314,8 +314,7 @@ static int atmel_ebi_dev_setup(struct atmel_ebi *ebi, struct device_node *np,
 
 		if (cs >= AT91_MATRIX_EBI_NUM_CS ||
 		    !(ebi->caps->available_cs & BIT(cs))) {
-			dev_err(dev, "invalid reg property in %s\n",
-				np->full_name);
+			dev_err(dev, "invalid reg property in %pOF\n", np);
 			return -EINVAL;
 		}
 
@@ -324,7 +323,7 @@ static int atmel_ebi_dev_setup(struct atmel_ebi *ebi, struct device_node *np,
 	}
 
 	if (!numcs) {
-		dev_err(dev, "invalid reg property in %s\n", np->full_name);
+		dev_err(dev, "invalid reg property in %pOF\n", np);
 		return -EINVAL;
 	}
 
@@ -576,8 +575,8 @@ static int atmel_ebi_probe(struct platform_device *pdev)
 
 		ret = atmel_ebi_dev_setup(ebi, child, reg_cells);
 		if (ret) {
-			dev_err(dev, "failed to configure EBI bus for %s, disabling the device",
-				child->full_name);
+			dev_err(dev, "failed to configure EBI bus for %pOF, disabling the device",
+				child);
 
 			ret = atmel_ebi_dev_disable(ebi, child);
 			if (ret)
diff --git a/drivers/memory/jz4780-nemc.c b/drivers/memory/jz4780-nemc.c
index 919d1925acb9..bcf06adefc96 100644
--- a/drivers/memory/jz4780-nemc.c
+++ b/drivers/memory/jz4780-nemc.c
@@ -322,8 +322,8 @@ static int jz4780_nemc_probe(struct platform_device *pdev)
 			bank = of_read_number(prop, 1);
 			if (bank < 1 || bank >= JZ4780_NEMC_NUM_BANKS) {
 				dev_err(nemc->dev,
-					"%s requests invalid bank %u\n",
-					child->full_name, bank);
+					"%pOF requests invalid bank %u\n",
+					child, bank);
 
 				/* Will continue the outer loop below. */
 				referenced = 0;
@@ -334,12 +334,12 @@ static int jz4780_nemc_probe(struct platform_device *pdev)
 		}
 
 		if (!referenced) {
-			dev_err(nemc->dev, "%s has no addresses\n",
-				child->full_name);
+			dev_err(nemc->dev, "%pOF has no addresses\n",
+				child);
 			continue;
 		} else if (nemc->banks_present & referenced) {
-			dev_err(nemc->dev, "%s conflicts with another node\n",
-				child->full_name);
+			dev_err(nemc->dev, "%pOF conflicts with another node\n",
+				child);
 			continue;
 		}
 
diff --git a/drivers/memory/mvebu-devbus.c b/drivers/memory/mvebu-devbus.c
index 24852812fd44..981860879d02 100644
--- a/drivers/memory/mvebu-devbus.c
+++ b/drivers/memory/mvebu-devbus.c
@@ -105,8 +105,8 @@ static int get_timing_param_ps(struct devbus *devbus,
 
 	err = of_property_read_u32(node, name, &time_ps);
 	if (err < 0) {
-		dev_err(devbus->dev, "%s has no '%s' property\n",
-			name, node->full_name);
+		dev_err(devbus->dev, "%pOF has no '%s' property\n",
+			node, name);
 		return err;
 	}
 
@@ -127,8 +127,8 @@ static int devbus_get_timing_params(struct devbus *devbus,
 	err = of_property_read_u32(node, "devbus,bus-width", &r->bus_width);
 	if (err < 0) {
 		dev_err(devbus->dev,
-			"%s has no 'devbus,bus-width' property\n",
-			node->full_name);
+			"%pOF has no 'devbus,bus-width' property\n",
+			node);
 		return err;
 	}
 
@@ -180,8 +180,8 @@ static int devbus_get_timing_params(struct devbus *devbus,
 					   &w->sync_enable);
 		if (err < 0) {
 			dev_err(devbus->dev,
-				"%s has no 'devbus,sync-enable' property\n",
-				node->full_name);
+				"%pOF has no 'devbus,sync-enable' property\n",
+				node);
 			return err;
 		}
 	}
diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c
index a80e17de906d..7059bbda2fac 100644
--- a/drivers/memory/omap-gpmc.c
+++ b/drivers/memory/omap-gpmc.c
@@ -1930,8 +1930,8 @@ static int gpmc_probe_onenand_child(struct platform_device *pdev,
 	struct omap_onenand_platform_data *gpmc_onenand_data;
 
 	if (of_property_read_u32(child, "reg", &val) < 0) {
-		dev_err(&pdev->dev, "%s has no 'reg' property\n",
-			child->full_name);
+		dev_err(&pdev->dev, "%pOF has no 'reg' property\n",
+			child);
 		return -ENODEV;
 	}
 
@@ -1979,14 +1979,14 @@ static int gpmc_probe_generic_child(struct platform_device *pdev,
 	struct gpmc_device *gpmc = platform_get_drvdata(pdev);
 
 	if (of_property_read_u32(child, "reg", &cs) < 0) {
-		dev_err(&pdev->dev, "%s has no 'reg' property\n",
-			child->full_name);
+		dev_err(&pdev->dev, "%pOF has no 'reg' property\n",
+			child);
 		return -ENODEV;
 	}
 
 	if (of_address_to_resource(child, 0, &res) < 0) {
-		dev_err(&pdev->dev, "%s has malformed 'reg' property\n",
-			child->full_name);
+		dev_err(&pdev->dev, "%pOF has malformed 'reg' property\n",
+			child);
 		return -ENODEV;
 	}
 
@@ -2084,8 +2084,8 @@ static int gpmc_probe_generic_child(struct platform_device *pdev,
 		ret = of_property_read_u32(child, "bank-width",
 					   &gpmc_s.device_width);
 		if (ret < 0) {
-			dev_err(&pdev->dev, "%s has no 'bank-width' property\n",
-				child->full_name);
+			dev_err(&pdev->dev, "%pOF has no 'bank-width' property\n",
+				child);
 			goto err;
 		}
 	}
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 608c071e4bbf..52d5251660b9 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -34,12 +34,11 @@ config RESET_BERLIN
 	help
 	  This enables the reset controller driver for Marvell Berlin SoCs.
 
-config RESET_GEMINI
-	bool "Gemini Reset Driver" if COMPILE_TEST
-	default ARCH_GEMINI
-	select MFD_SYSCON
+config RESET_HSDK_V1
+	bool "HSDK v1 Reset Driver"
+	default n
 	help
-	  This enables the reset controller driver for Cortina Systems Gemini.
+	  This enables the reset controller driver for HSDK v1.
 
 config RESET_IMX7
 	bool "i.MX7 Reset Driver" if COMPILE_TEST
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 7081f9da2599..b62783f50fe5 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -5,7 +5,7 @@ obj-$(CONFIG_ARCH_TEGRA) += tegra/
 obj-$(CONFIG_RESET_A10SR) += reset-a10sr.o
 obj-$(CONFIG_RESET_ATH79) += reset-ath79.o
 obj-$(CONFIG_RESET_BERLIN) += reset-berlin.o
-obj-$(CONFIG_RESET_GEMINI) += reset-gemini.o
+obj-$(CONFIG_RESET_HSDK_V1) += reset-hsdk-v1.o
 obj-$(CONFIG_RESET_IMX7) += reset-imx7.o
 obj-$(CONFIG_RESET_LPC18XX) += reset-lpc18xx.o
 obj-$(CONFIG_RESET_MESON) += reset-meson.o
diff --git a/drivers/reset/core.c b/drivers/reset/core.c
index 0090784ff410..1d21c6f7d56c 100644
--- a/drivers/reset/core.c
+++ b/drivers/reset/core.c
@@ -43,11 +43,24 @@ struct reset_control {
 	unsigned int id;
 	struct kref refcnt;
 	bool shared;
+	bool array;
 	atomic_t deassert_count;
 	atomic_t triggered_count;
 };
 
 /**
+ * struct reset_control_array - an array of reset controls
+ * @base: reset control for compatibility with reset control API functions
+ * @num_rstcs: number of reset controls
+ * @rstc: array of reset controls
+ */
+struct reset_control_array {
+	struct reset_control base;
+	unsigned int num_rstcs;
+	struct reset_control *rstc[];
+};
+
+/**
  * of_reset_simple_xlate - translate reset_spec to the reset line number
  * @rcdev: a pointer to the reset controller device
  * @reset_spec: reset line specifier as found in the device tree
@@ -135,6 +148,65 @@ int devm_reset_controller_register(struct device *dev,
 }
 EXPORT_SYMBOL_GPL(devm_reset_controller_register);
 
+static inline struct reset_control_array *
+rstc_to_array(struct reset_control *rstc) {
+	return container_of(rstc, struct reset_control_array, base);
+}
+
+static int reset_control_array_reset(struct reset_control_array *resets)
+{
+	int ret, i;
+
+	for (i = 0; i < resets->num_rstcs; i++) {
+		ret = reset_control_reset(resets->rstc[i]);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int reset_control_array_assert(struct reset_control_array *resets)
+{
+	int ret, i;
+
+	for (i = 0; i < resets->num_rstcs; i++) {
+		ret = reset_control_assert(resets->rstc[i]);
+		if (ret)
+			goto err;
+	}
+
+	return 0;
+
+err:
+	while (i--)
+		reset_control_deassert(resets->rstc[i]);
+	return ret;
+}
+
+static int reset_control_array_deassert(struct reset_control_array *resets)
+{
+	int ret, i;
+
+	for (i = 0; i < resets->num_rstcs; i++) {
+		ret = reset_control_deassert(resets->rstc[i]);
+		if (ret)
+			goto err;
+	}
+
+	return 0;
+
+err:
+	while (i--)
+		reset_control_assert(resets->rstc[i]);
+	return ret;
+}
+
+static inline bool reset_control_is_array(struct reset_control *rstc)
+{
+	return rstc->array;
+}
+
 /**
  * reset_control_reset - reset the controlled device
  * @rstc: reset controller
@@ -158,6 +230,9 @@ int reset_control_reset(struct reset_control *rstc)
 	if (WARN_ON(IS_ERR(rstc)))
 		return -EINVAL;
 
+	if (reset_control_is_array(rstc))
+		return reset_control_array_reset(rstc_to_array(rstc));
+
 	if (!rstc->rcdev->ops->reset)
 		return -ENOTSUPP;
 
@@ -202,8 +277,8 @@ int reset_control_assert(struct reset_control *rstc)
 	if (WARN_ON(IS_ERR(rstc)))
 		return -EINVAL;
 
-	if (!rstc->rcdev->ops->assert)
-		return -ENOTSUPP;
+	if (reset_control_is_array(rstc))
+		return reset_control_array_assert(rstc_to_array(rstc));
 
 	if (rstc->shared) {
 		if (WARN_ON(atomic_read(&rstc->triggered_count) != 0))
@@ -214,6 +289,21 @@ int reset_control_assert(struct reset_control *rstc)
 
 		if (atomic_dec_return(&rstc->deassert_count) != 0)
 			return 0;
+
+		/*
+		 * Shared reset controls allow the reset line to be in any state
+		 * after this call, so doing nothing is a valid option.
+		 */
+		if (!rstc->rcdev->ops->assert)
+			return 0;
+	} else {
+		/*
+		 * If the reset controller does not implement .assert(), there
+		 * is no way to guarantee that the reset line is asserted after
+		 * this call.
+		 */
+		if (!rstc->rcdev->ops->assert)
+			return -ENOTSUPP;
 	}
 
 	return rstc->rcdev->ops->assert(rstc->rcdev, rstc->id);
@@ -240,8 +330,8 @@ int reset_control_deassert(struct reset_control *rstc)
 	if (WARN_ON(IS_ERR(rstc)))
 		return -EINVAL;
 
-	if (!rstc->rcdev->ops->deassert)
-		return -ENOTSUPP;
+	if (reset_control_is_array(rstc))
+		return reset_control_array_deassert(rstc_to_array(rstc));
 
 	if (rstc->shared) {
 		if (WARN_ON(atomic_read(&rstc->triggered_count) != 0))
@@ -251,6 +341,16 @@ int reset_control_deassert(struct reset_control *rstc)
 			return 0;
 	}
 
+	/*
+	 * If the reset controller does not implement .deassert(), we assume
+	 * that it handles self-deasserting reset lines via .reset(). In that
+	 * case, the reset lines are deasserted by default. If that is not the
+	 * case, the reset controller driver should implement .deassert() and
+	 * return -ENOTSUPP.
+	 */
+	if (!rstc->rcdev->ops->deassert)
+		return 0;
+
 	return rstc->rcdev->ops->deassert(rstc->rcdev, rstc->id);
 }
 EXPORT_SYMBOL_GPL(reset_control_deassert);
@@ -266,7 +366,7 @@ int reset_control_status(struct reset_control *rstc)
 	if (!rstc)
 		return 0;
 
-	if (WARN_ON(IS_ERR(rstc)))
+	if (WARN_ON(IS_ERR(rstc)) || reset_control_is_array(rstc))
 		return -EINVAL;
 
 	if (rstc->rcdev->ops->status)
@@ -404,6 +504,16 @@ struct reset_control *__reset_control_get(struct device *dev, const char *id,
 }
 EXPORT_SYMBOL_GPL(__reset_control_get);
 
+static void reset_control_array_put(struct reset_control_ar