Merge tag 'spi-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "The diffstat for this release is dominated by the new Airoha driver,
  mainly as a result of this being a generally quite quiet release.
  There were a couple of cleanups in the core but nothing substantial,
  the updates here are almost all driver specific ones.

   - Support for multi-word mode in the OMAP2 McSPI driver

   - Overhaul of the PXA2xx driver, mostly API updates

   - A number of DT binding conversions

   - Support for Airoha NAND controllers, Cirrus Logic CS35L56, Mobileye
     EYEQ5 and Renesas R8A779H0"

* tag 'spi-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (87 commits)
  spi: dw: Bail out early on unsupported target mode
  spi: Remove unneded check for orig_nents
  MAINTAINERS: repair file entry in AIROHA SPI SNFI DRIVER
  spi: pxa2xx: Drop the stale entry in documentation TOC
  spi: pxa2xx: Don't provide struct chip_data for others
  spi: pxa2xx: Remove timeout field from struct chip_data
  spi: pxa2xx: Remove DMA parameters from struct chip_data
  spi: pxa2xx: Drop struct pxa2xx_spi_chip
  spi: pxa2xx: Don't use "proxy" headers
  spi: pxa2xx: Remove outdated documentation
  spi: pxa2xx: Move contents of linux/spi/pxa2xx_spi.h to a local one
  spi: pxa2xx: Provide num-cs for Sharp PDAs via device properties
  spi: pxa2xx: Allow number of chip select pins to be read from property
  spi: dt-bindings: ti,qspi: convert to dtschema
  spi: bitbang: Add missing MODULE_DESCRIPTION()
  spi: bitbang: Use NSEC_PER_*SEC rather than hard coding
  spi: dw: Drop default number of CS setting
  spi: dw: Convert dw_spi::num_cs to u32
  spi: dw: Add a number of native CS auto-detection
  spi: dw: Convert to using BITS_TO_BYTES() macro
  ...

43 files changed, 1946 insertions, 513 deletions

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index b50d0b470849..00b5c007a2bb 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -103,6 +103,15 @@ config GPIO_REGMAP
 	select REGMAP
 	tristate
 
+config GPIO_SWNODE_UNDEFINED
+	bool
+	help
+	  This adds a special place holder for software nodes to contain an
+	  undefined GPIO reference, this is primarily used by SPI to allow a
+	  list of GPIO chip selects to mark a certain chip select as being
+	  controlled the SPI device's internal chip select mechanism and not
+	  a GPIO.
+
 # put drivers in the right section, in alphabetical order
 
 # This symbol is selected by both I2C and SPI expanders
diff --git a/drivers/gpio/gpiolib-swnode.c b/drivers/gpio/gpiolib-swnode.c
index fa52bdb1a29a..cec1ab878af8 100644
--- a/drivers/gpio/gpiolib-swnode.c
+++ b/drivers/gpio/gpiolib-swnode.c
@@ -4,8 +4,13 @@
  *
  * Copyright 2022 Google LLC
  */
+
+#define pr_fmt(fmt) "gpiolib: swnode: " fmt
+
 #include <linux/err.h>
 #include <linux/errno.h>
+#include <linux/export.h>
+#include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/printk.h>
 #include <linux/property.h>
@@ -17,6 +22,8 @@
 #include "gpiolib.h"
 #include "gpiolib-swnode.h"
 
+#define GPIOLIB_SWNODE_UNDEFINED_NAME "swnode-gpio-undefined"
+
 static void swnode_format_propname(const char *con_id, char *propname,
 				   size_t max_size)
 {
@@ -40,6 +47,14 @@ static struct gpio_device *swnode_get_gpio_device(struct fwnode_handle *fwnode)
 	if (!gdev_node || !gdev_node->name)
 		return ERR_PTR(-EINVAL);
 
+	/*
+	 * Check for a special node that identifies undefined GPIOs, this is
+	 * primarily used as a key for internal chip selects in SPI bindings.
+	 */
+	if (IS_ENABLED(CONFIG_GPIO_SWNODE_UNDEFINED) &&
+	    !strcmp(gdev_node->name, GPIOLIB_SWNODE_UNDEFINED_NAME))
+		return ERR_PTR(-ENOENT);
+
 	gdev = gpio_device_find_by_label(gdev_node->name);
 	return gdev ?: ERR_PTR(-EPROBE_DEFER);
 }
@@ -121,3 +136,32 @@ int swnode_gpio_count(const struct fwnode_handle *fwnode, const char *con_id)
 
 	return count ?: -ENOENT;
 }
+
+#if IS_ENABLED(CONFIG_GPIO_SWNODE_UNDEFINED)
+/*
+ * A special node that identifies undefined GPIOs, this is primarily used as
+ * a key for internal chip selects in SPI bindings.
+ */
+const struct software_node swnode_gpio_undefined = {
+	.name = GPIOLIB_SWNODE_UNDEFINED_NAME,
+};
+EXPORT_SYMBOL_NS_GPL(swnode_gpio_undefined, GPIO_SWNODE);
+
+static int __init swnode_gpio_init(void)
+{
+	int ret;
+
+	ret = software_node_register(&swnode_gpio_undefined);
+	if (ret < 0)
+		pr_err("failed to register swnode: %d\n", ret);
+
+	return ret;
+}
+subsys_initcall(swnode_gpio_init);
+
+static void __exit swnode_gpio_cleanup(void)
+{
+	software_node_unregister(&swnode_gpio_undefined);
+}
+__exitcall(swnode_gpio_cleanup);
+#endif
diff --git a/drivers/soc/pxa/ssp.c b/drivers/soc/pxa/ssp.c
index 7af04e8b8163..854d32e04558 100644
--- a/drivers/soc/pxa/ssp.c
+++ b/drivers/soc/pxa/ssp.c
@@ -25,7 +25,7 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
-#include <linux/spi/pxa2xx_spi.h>
+#include <linux/pxa2xx_ssp.h>
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index bc7021da2fe9..a2c99ff33e0a 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -57,6 +57,16 @@ config SPI_MEM
 
 comment "SPI Master Controller Drivers"
 
+config SPI_AIROHA_SNFI
+	tristate "Airoha SPI NAND Flash Interface"
+	depends on ARCH_AIROHA || COMPILE_TEST
+	depends on SPI_MASTER
+	select REGMAP_MMIO
+	help
+	  This enables support for SPI-NAND mode on the Airoha NAND
+	  Flash Interface found on Airoha ARM SoCs. This controller
+	  is implemented as a SPI-MEM controller.
+
 config SPI_ALTERA
 	tristate "Altera SPI Controller platform driver"
 	select SPI_ALTERA_CORE
@@ -216,11 +226,11 @@ config SPI_BCMBCA_HSSPI
 	  explicitly.
 
 config SPI_BITBANG
-	tristate "Utilities for Bitbanging SPI masters"
+	tristate "Utilities for Bitbanging SPI host controllers"
 	help
 	  With a few GPIO pins, your system can bitbang the SPI protocol.
 	  Select this to get SPI support through I/O pins (GPIO, parallel
-	  port, etc).  Or, some systems' SPI master controller drivers use
+	  port, etc).  Or, some systems' SPI host controller drivers use
 	  this code to manage the per-word or per-transfer accesses to the
 	  hardware shift registers.
 
@@ -246,7 +256,7 @@ config SPI_CADENCE
 
 config SPI_CADENCE_QUADSPI
 	tristate "Cadence Quad SPI controller"
-	depends on OF && (ARM || ARM64 || X86 || RISCV || COMPILE_TEST)
+	depends on OF && (ARM || ARM64 || X86 || RISCV || MIPS || COMPILE_TEST)
 	help
 	  Enable support for the Cadence Quad SPI Flash controller.
 
@@ -284,6 +294,7 @@ config SPI_COLDFIRE_QSPI
 config SPI_CS42L43
 	tristate "Cirrus Logic CS42L43 SPI controller"
 	depends on MFD_CS42L43 && PINCTRL_CS42L43
+	select GPIO_SWNODE_UNDEFINED
 	help
 	  This enables support for the SPI controller inside the Cirrus Logic
 	  CS42L43 audio codec.
@@ -817,12 +828,11 @@ config SPI_PPC4xx
 
 config SPI_PXA2XX
 	tristate "PXA2xx SSP SPI master"
-	depends on ARCH_PXA || ARCH_MMP || PCI || ACPI || COMPILE_TEST
+	depends on ARCH_PXA || ARCH_MMP || (X86 && (PCI || ACPI)) || COMPILE_TEST
 	select PXA_SSP if ARCH_PXA || ARCH_MMP
 	help
 	  This enables using a PXA2xx or Sodaville SSP port as a SPI master
-	  controller. The driver can be configured to use any SSP port and
-	  additional documentation can be found a Documentation/spi/pxa2xx.rst.
+	  controller. The driver can be configured to use any SSP port.
 
 config SPI_PXA2XX_PCI
 	def_tristate SPI_PXA2XX && PCI && COMMON_CLK
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 4ff8d725ba5e..e694254dec04 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_SPI_SPIDEV)		+= spidev.o
 obj-$(CONFIG_SPI_LOOPBACK_TEST)		+= spi-loopback-test.o
 
 # SPI master controller drivers (bus)
+obj-$(CONFIG_SPI_AIROHA_SNFI)		+= spi-airoha-snfi.o
 obj-$(CONFIG_SPI_ALTERA)		+= spi-altera-platform.o
 obj-$(CONFIG_SPI_ALTERA_CORE)		+= spi-altera-core.o
 obj-$(CONFIG_SPI_ALTERA_DFL)		+= spi-altera-dfl.o
diff --git a/drivers/spi/spi-airoha-snfi.c b/drivers/spi/spi-airoha-snfi.c
new file mode 100644
index 000000000000..9d97ec98881c
--- /dev/null
+++ b/drivers/spi/spi-airoha-snfi.c
@@ -0,0 +1,1129 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2024 AIROHA Inc
+ * Author: Lorenzo Bianconi <lorenzo@kernel.org>
+ * Author: Ray Liu <ray.liu@airoha.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/errno.h>
+#include <linux/limits.h>
+#include <linux/math.h>
+#include <linux/minmax.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/sizes.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi-mem.h>
+#include <linux/types.h>
+#include <asm/unaligned.h>
+
+/* SPI */
+#define REG_SPI_CTRL_BASE			0x1FA10000
+
+#define REG_SPI_CTRL_READ_MODE			0x0000
+#define REG_SPI_CTRL_READ_IDLE_EN		0x0004
+#define REG_SPI_CTRL_SIDLY			0x0008
+#define REG_SPI_CTRL_CSHEXT			0x000c
+#define REG_SPI_CTRL_CSLEXT			0x0010
+
+#define REG_SPI_CTRL_MTX_MODE_TOG		0x0014
+#define SPI_CTRL_MTX_MODE_TOG			GENMASK(3, 0)
+
+#define REG_SPI_CTRL_RDCTL_FSM			0x0018
+#define SPI_CTRL_RDCTL_FSM			GENMASK(3, 0)
+
+#define REG_SPI_CTRL_MACMUX_SEL			0x001c
+
+#define REG_SPI_CTRL_MANUAL_EN			0x0020
+#define SPI_CTRL_MANUAL_EN			BIT(0)
+
+#define REG_SPI_CTRL_OPFIFO_EMPTY		0x0024
+#define SPI_CTRL_OPFIFO_EMPTY			BIT(0)
+
+#define REG_SPI_CTRL_OPFIFO_WDATA		0x0028
+#define SPI_CTRL_OPFIFO_LEN			GENMASK(8, 0)
+#define SPI_CTRL_OPFIFO_OP			GENMASK(13, 9)
+
+#define REG_SPI_CTRL_OPFIFO_FULL		0x002c
+#define SPI_CTRL_OPFIFO_FULL			BIT(0)
+
+#define REG_SPI_CTRL_OPFIFO_WR			0x0030
+#define SPI_CTRL_OPFIFO_WR			BIT(0)
+
+#define REG_SPI_CTRL_DFIFO_FULL			0x0034
+#define SPI_CTRL_DFIFO_FULL			BIT(0)
+
+#define REG_SPI_CTRL_DFIFO_WDATA		0x0038
+#define SPI_CTRL_DFIFO_WDATA			GENMASK(7, 0)
+
+#define REG_SPI_CTRL_DFIFO_EMPTY		0x003c
+#define SPI_CTRL_DFIFO_EMPTY			BIT(0)
+
+#define REG_SPI_CTRL_DFIFO_RD			0x0040
+#define SPI_CTRL_DFIFO_RD			BIT(0)
+
+#define REG_SPI_CTRL_DFIFO_RDATA		0x0044
+#define SPI_CTRL_DFIFO_RDATA			GENMASK(7, 0)
+
+#define REG_SPI_CTRL_DUMMY			0x0080
+#define SPI_CTRL_CTRL_DUMMY			GENMASK(3, 0)
+
+#define REG_SPI_CTRL_PROBE_SEL			0x0088
+#define REG_SPI_CTRL_INTERRUPT			0x0090
+#define REG_SPI_CTRL_INTERRUPT_EN		0x0094
+#define REG_SPI_CTRL_SI_CK_SEL			0x009c
+#define REG_SPI_CTRL_SW_CFGNANDADDR_VAL		0x010c
+#define REG_SPI_CTRL_SW_CFGNANDADDR_EN		0x0110
+#define REG_SPI_CTRL_SFC_STRAP			0x0114
+
+#define REG_SPI_CTRL_NFI2SPI_EN			0x0130
+#define SPI_CTRL_NFI2SPI_EN			BIT(0)
+
+/* NFI2SPI */
+#define REG_SPI_NFI_CNFG			0x0000
+#define SPI_NFI_DMA_MODE			BIT(0)
+#define SPI_NFI_READ_MODE			BIT(1)
+#define SPI_NFI_DMA_BURST_EN			BIT(2)
+#define SPI_NFI_HW_ECC_EN			BIT(8)
+#define SPI_NFI_AUTO_FDM_EN			BIT(9)
+#define SPI_NFI_OPMODE				GENMASK(14, 12)
+
+#define REG_SPI_NFI_PAGEFMT			0x0004
+#define SPI_NFI_PAGE_SIZE			GENMASK(1, 0)
+#define SPI_NFI_SPARE_SIZE			GENMASK(5, 4)
+
+#define REG_SPI_NFI_CON				0x0008
+#define SPI_NFI_FIFO_FLUSH			BIT(0)
+#define SPI_NFI_RST				BIT(1)
+#define SPI_NFI_RD_TRIG				BIT(8)
+#define SPI_NFI_WR_TRIG				BIT(9)
+#define SPI_NFI_SEC_NUM				GENMASK(15, 12)
+
+#define REG_SPI_NFI_INTR_EN			0x0010
+#define SPI_NFI_RD_DONE_EN			BIT(0)
+#define SPI_NFI_WR_DONE_EN			BIT(1)
+#define SPI_NFI_RST_DONE_EN			BIT(2)
+#define SPI_NFI_ERASE_DONE_EN			BIT(3)
+#define SPI_NFI_BUSY_RETURN_EN			BIT(4)
+#define SPI_NFI_ACCESS_LOCK_EN			BIT(5)
+#define SPI_NFI_AHB_DONE_EN			BIT(6)
+#define SPI_NFI_ALL_IRQ_EN					\
+	(SPI_NFI_RD_DONE_EN | SPI_NFI_WR_DONE_EN |		\
+	 SPI_NFI_RST_DONE_EN | SPI_NFI_ERASE_DONE_EN |		\
+	 SPI_NFI_BUSY_RETURN_EN | SPI_NFI_ACCESS_LOCK_EN |	\
+	 SPI_NFI_AHB_DONE_EN)
+
+#define REG_SPI_NFI_INTR			0x0014
+#define SPI_NFI_AHB_DONE			BIT(6)
+
+#define REG_SPI_NFI_CMD				0x0020
+
+#define REG_SPI_NFI_ADDR_NOB			0x0030
+#define SPI_NFI_ROW_ADDR_NOB			GENMASK(6, 4)
+
+#define REG_SPI_NFI_STA				0x0060
+#define REG_SPI_NFI_FIFOSTA			0x0064
+#define REG_SPI_NFI_STRADDR			0x0080
+#define REG_SPI_NFI_FDM0L			0x00a0
+#define REG_SPI_NFI_FDM0M			0x00a4
+#define REG_SPI_NFI_FDM7L			0x00d8
+#define REG_SPI_NFI_FDM7M			0x00dc
+#define REG_SPI_NFI_FIFODATA0			0x0190
+#define REG_SPI_NFI_FIFODATA1			0x0194
+#define REG_SPI_NFI_FIFODATA2			0x0198
+#define REG_SPI_NFI_FIFODATA3			0x019c
+#define REG_SPI_NFI_MASTERSTA			0x0224
+
+#define REG_SPI_NFI_SECCUS_SIZE			0x022c
+#define SPI_NFI_CUS_SEC_SIZE			GENMASK(12, 0)
+#define SPI_NFI_CUS_SEC_SIZE_EN			BIT(16)
+
+#define REG_SPI_NFI_RD_CTL2			0x0510
+#define REG_SPI_NFI_RD_CTL3			0x0514
+
+#define REG_SPI_NFI_PG_CTL1			0x0524
+#define SPI_NFI_PG_LOAD_CMD			GENMASK(15, 8)
+
+#define REG_SPI_NFI_PG_CTL2			0x0528
+#define REG_SPI_NFI_NOR_PROG_ADDR		0x052c
+#define REG_SPI_NFI_NOR_RD_ADDR			0x0534
+
+#define REG_SPI_NFI_SNF_MISC_CTL		0x0538
+#define SPI_NFI_DATA_READ_WR_MODE		GENMASK(18, 16)
+
+#define REG_SPI_NFI_SNF_MISC_CTL2		0x053c
+#define SPI_NFI_READ_DATA_BYTE_NUM		GENMASK(12, 0)
+#define SPI_NFI_PROG_LOAD_BYTE_NUM		GENMASK(28, 16)
+
+#define REG_SPI_NFI_SNF_STA_CTL1		0x0550
+#define SPI_NFI_READ_FROM_CACHE_DONE		BIT(25)
+#define SPI_NFI_LOAD_TO_CACHE_DONE		BIT(26)
+
+#define REG_SPI_NFI_SNF_STA_CTL2		0x0554
+
+#define REG_SPI_NFI_SNF_NFI_CNFG		0x055c
+#define SPI_NFI_SPI_MODE			BIT(0)
+
+/* SPI NAND Protocol OP */
+#define SPI_NAND_OP_GET_FEATURE			0x0f
+#define SPI_NAND_OP_SET_FEATURE			0x1f
+#define SPI_NAND_OP_PAGE_READ			0x13
+#define SPI_NAND_OP_READ_FROM_CACHE_SINGLE	0x03
+#define SPI_NAND_OP_READ_FROM_CACHE_SINGLE_FAST	0x0b
+#define SPI_NAND_OP_READ_FROM_CACHE_DUAL	0x3b
+#define SPI_NAND_OP_READ_FROM_CACHE_QUAD	0x6b
+#define SPI_NAND_OP_WRITE_ENABLE		0x06
+#define SPI_NAND_OP_WRITE_DISABLE		0x04
+#define SPI_NAND_OP_PROGRAM_LOAD_SINGLE		0x02
+#define SPI_NAND_OP_PROGRAM_LOAD_QUAD		0x32
+#define SPI_NAND_OP_PROGRAM_LOAD_RAMDOM_SINGLE	0x84
+#define SPI_NAND_OP_PROGRAM_LOAD_RAMDON_QUAD	0x34
+#define SPI_NAND_OP_PROGRAM_EXECUTE		0x10
+#define SPI_NAND_OP_READ_ID			0x9f
+#define SPI_NAND_OP_BLOCK_ERASE			0xd8
+#define SPI_NAND_OP_RESET			0xff
+#define SPI_NAND_OP_DIE_SELECT			0xc2
+
+#define SPI_NAND_CACHE_SIZE			(SZ_4K + SZ_256)
+#define SPI_MAX_TRANSFER_SIZE			511
+
+enum airoha_snand_mode {
+	SPI_MODE_AUTO,
+	SPI_MODE_MANUAL,
+	SPI_MODE_DMA,
+};
+
+enum airoha_snand_cs {
+	SPI_CHIP_SEL_HIGH,
+	SPI_CHIP_SEL_LOW,
+};
+
+struct airoha_snand_dev {
+	size_t buf_len;
+
+	u8 *txrx_buf;
+	dma_addr_t dma_addr;
+
+	u64 cur_page_num;
+	bool data_need_update;
+};
+
+struct airoha_snand_ctrl {
+	struct device *dev;
+	struct regmap *regmap_ctrl;
+	struct regmap *regmap_nfi;
+	struct clk *spi_clk;
+
+	struct {
+		size_t page_size;
+		size_t sec_size;
+		u8 sec_num;
+		u8 spare_size;
+	} nfi_cfg;
+};
+
+static int airoha_snand_set_fifo_op(struct airoha_snand_ctrl *as_ctrl,
+				    u8 op_cmd, int op_len)
+{
+	int err;
+	u32 val;
+
+	err = regmap_write(as_ctrl->regmap_ctrl, REG_SPI_CTRL_OPFIFO_WDATA,
+			   FIELD_PREP(SPI_CTRL_OPFIFO_LEN, op_len) |
+			   FIELD_PREP(SPI_CTRL_OPFIFO_OP, op_cmd));
+	if (err)
+		return err;
+
+	err = regmap_read_poll_timeout(as_ctrl->regmap_ctrl,
+				       REG_SPI_CTRL_OPFIFO_FULL,
+				       val, !(val & SPI_CTRL_OPFIFO_FULL),
+				       0, 250 * USEC_PER_MSEC);
+	if (err)
+		return err;
+
+	err = regmap_write(as_ctrl->regmap_ctrl, REG_SPI_CTRL_OPFIFO_WR,
+			   SPI_CTRL_OPFIFO_WR);
+	if (err)
+		return err;
+
+	return regmap_read_poll_timeout(as_ctrl->regmap_ctrl,
+					REG_SPI_CTRL_OPFIFO_EMPTY,
+					val, (val & SPI_CTRL_OPFIFO_EMPTY),
+					0, 250 * USEC_PER_MSEC);
+}
+
+static int airoha_snand_set_cs(struct airoha_snand_ctrl *as_ctrl, u8 cs)
+{
+	return airoha_snand_set_fifo_op(as_ctrl, cs, sizeof(cs));
+}
+
+static int airoha_snand_write_data_to_fifo(struct airoha_snand_ctrl *as_ctrl,
+					   const u8 *data, int len)
+{
+	int i;
+
+	for (i = 0; i < len; i++) {
+		int err;
+		u32 val;
+
+		/* 1. Wait until dfifo is not full */
+		err = regmap_read_poll_timeout(as_ctrl->regmap_ctrl,
+					       REG_SPI_CTRL_DFIFO_FULL, val,
+					       !(val & SPI_CTRL_DFIFO_FULL),
+					       0, 250 * USEC_PER_MSEC);
+		if (err)
+			return err;
+
+		/* 2. Write data to register DFIFO_WDATA */
+		err = regmap_write(as_ctrl->regmap_ctrl,
+				   REG_SPI_CTRL_DFIFO_WDATA,
+				   FIELD_PREP(SPI_CTRL_DFIFO_WDATA, data[i]));
+		if (err)
+			return err;
+
+		/* 3. Wait until dfifo is not full */
+		err = regmap_read_poll_timeout(as_ctrl->regmap_ctrl,
+					       REG_SPI_CTRL_DFIFO_FULL, val,
+					       !(val & SPI_CTRL_DFIFO_FULL),
+					       0, 250 * USEC_PER_MSEC);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+static int airoha_snand_read_data_from_fifo(struct airoha_snand_ctrl *as_ctrl,
+					    u8 *ptr, int len)
+{
+	int i;
+
+	for (i = 0; i < len; i++) {
+		int err;
+		u32 val;
+
+		/* 1. wait until dfifo is not empty */
+		err = regmap_read_poll_timeout(as_ctrl->regmap_ctrl,
+					       REG_SPI_CTRL_DFIFO_EMPTY, val,
+					       !(val & SPI_CTRL_DFIFO_EMPTY),
+					       0, 250 * USEC_PER_MSEC);
+		if (err)
+			return err;
+
+		/* 2. read from dfifo to register DFIFO_RDATA */
+		err = regmap_read(as_ctrl->regmap_ctrl,
+				  REG_SPI_CTRL_DFIFO_RDATA, &val);
+		if (err)
+			return err;
+
+		ptr[i] = FIELD_GET(SPI_CTRL_DFIFO_RDATA, val);
+		/* 3. enable register DFIFO_RD to read next byte */
+		err = regmap_write(as_ctrl->regmap_ctrl,
+				   REG_SPI_CTRL_DFIFO_RD, SPI_CTRL_DFIFO_RD);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+static int airoha_snand_set_mode(struct airoha_snand_ctrl *as_ctrl,
+				 enum airoha_snand_mode mode)
+{
+	int err;
+
+	switch (mode) {
+	case SPI_MODE_MANUAL: {
+		u32 val;
+
+		err = regmap_write(as_ctrl->regmap_ctrl,
+				   REG_SPI_CTRL_NFI2SPI_EN, 0);
+		if (err)
+			return err;
+
+		err = regmap_write(as_ctrl->regmap_ctrl,
+				   REG_SPI_CTRL_READ_IDLE_EN, 0);
+		if (err)
+			return err;
+
+		err = regmap_read_poll_timeout(as_ctrl->regmap_ctrl,
+					       REG_SPI_CTRL_RDCTL_FSM, val,
+					       !(val & SPI_CTRL_RDCTL_FSM),
+					       0, 250 * USEC_PER_MSEC);
+		if (err)
+			return err;
+
+		err = regmap_write(as_ctrl->regmap_ctrl,
+				   REG_SPI_CTRL_MTX_MODE_TOG, 9);
+		if (err)
+			return err;
+
+		err = regmap_write(as_ctrl->regmap_ctrl,
+				   REG_SPI_CTRL_MANUAL_EN, SPI_CTRL_MANUAL_EN);
+		if (err)
+			return err;
+		break;
+	}
+	case SPI_MODE_DMA:
+		err = regmap_write(as_ctrl->regmap_ctrl,
+				   REG_SPI_CTRL_NFI2SPI_EN,
+				   SPI_CTRL_MANUAL_EN);
+		if (err < 0)
+			return err;
+
+		err = regmap_write(as_ctrl->regmap_ctrl,
+				   REG_SPI_CTRL_MTX_MODE_TOG, 0x0);
+		if (err < 0)
+			return err;
+
+		err = regmap_write(as_ctrl->regmap_ctrl,
+				   REG_SPI_CTRL_MANUAL_EN, 0x0);
+		if (err < 0)
+			return err;
+		break;
+	case SPI_MODE_AUTO:
+	default:
+		break;
+	}
+
+	return regmap_write(as_ctrl->regmap_ctrl, REG_SPI_CTRL_DUMMY, 0);
+}
+
+static int airoha_snand_write_data(struct airoha_snand_ctrl *as_ctrl, u8 cmd,
+				   const u8 *data, int len)
+{
+	int i, data_len;
+
+	for (i = 0; i < len; i += data_len) {
+		int err;
+
+		data_len = min(len, SPI_MAX_TRANSFER_SIZE);
+		err = airoha_snand_set_fifo_op(as_ctrl, cmd, data_len);
+		if (err)
+			return err;
+
+		err = airoha_snand_write_data_to_fifo(as_ctrl, &data[i],
+						      data_len);
+		if (err < 0)
+			return err;
+	}
+
+	return 0;
+}
+
+static int airoha_snand_read_data(struct airoha_snand_ctrl *as_ctrl, u8 *data,
+				  int len)
+{
+	int i, data_len;
+
+	for (i = 0; i < len; i += data_len) {
+		int err;
+
+		data_len = min(len, SPI_MAX_TRANSFER_SIZE);
+		err = airoha_snand_set_fifo_op(as_ctrl, 0xc, data_len);
+		if (err)
+			return err;
+
+		err = airoha_snand_read_data_from_fifo(as_ctrl, &data[i],
+						       data_len);
+		if (err < 0)
+			return err;
+	}
+
+	return 0;
+}
+
+static int airoha_snand_nfi_init(struct airoha_snand_ctrl *as_ctrl)
+{
+	int err;
+
+	/* switch to SNFI mode */
+	err = regmap_write(as_ctrl->regmap_nfi, REG_SPI_NFI_SNF_NFI_CNFG,
+			   SPI_NFI_SPI_MODE);
+	if (err)
+		return err;
+
+	/* Enable DMA */
+	return regmap_update_bits(as_ctrl->regmap_nfi, REG_SPI_NFI_INTR_EN,
+				  SPI_NFI_ALL_IRQ_EN, SPI_NFI_AHB_DONE_EN);
+}
+
+static int airoha_snand_nfi_config(struct airoha_snand_ctrl *as_ctrl)
+{
+	int err;
+	u32 val;
+
+	err = regmap_write(as_ctrl->regmap_nfi, REG_SPI_NFI_CON,
+			   SPI_NFI_FIFO_FLUSH | SPI_NFI_RST);
+	if (err)
+		return err;
+
+	/* auto FDM */
+	err = regmap_clear_bits(as_ctrl->regmap_nfi, REG_SPI_NFI_CNFG,
+				SPI_NFI_AUTO_FDM_EN);
+	if (err)
+		return err;
+
+	/* HW ECC */
+	err = regmap_clear_bits(as_ctrl->regmap_nfi, REG_SPI_NFI_CNFG,
+				SPI_NFI_HW_ECC_EN);
+	if (err)
+		return err;
+
+	/* DMA Burst */
+	err = regmap_set_bits(as_ctrl->regmap_nfi, REG_SPI_NFI_CNFG,
+			      SPI_NFI_DMA_BURST_EN);
+	if (err)
+		return err;
+
+	/* page format */
+	switch (as_ctrl->nfi_cfg.spare_size) {
+	case 26:
+		val = FIELD_PREP(SPI_NFI_SPARE_SIZE, 0x1);
+		break;
+	case 27:
+		val = FIELD_PREP(SPI_NFI_SPARE_SIZE, 0x2);
+		break;
+	case 28:
+		val = FIELD_PREP(SPI_NFI_SPARE_SIZE, 0x3);
+		break;
+	default:
+		val = FIELD_PREP(SPI_NFI_SPARE_SIZE, 0x0);
+		break;
+	}
+
+	err = regmap_update_bits(as_ctrl->regmap_nfi, REG_SPI_NFI_PAGEFMT,
+				 SPI_NFI_SPARE_SIZE, val);
+	if (err)
+		return err;
+
+	switch (as_ctrl->nfi_cfg.page_size) {
+	case 2048:
+		val = FIELD_PREP(SPI_NFI_PAGE_SIZE, 0x1);
+		break;
+	case 4096:
+		val = FIELD_PREP(SPI_NFI_PAGE_SIZE, 0x2);
+		break;
+	default:
+		val = FIELD_PREP(SPI_NFI_PAGE_SIZE, 0x0);
+		break;
+	}
+
+	err = regmap_update_bits(as_ctrl->regmap_nfi, REG_SPI_NFI_PAGEFMT,
+				 SPI_NFI_PAGE_SIZE, val);
+	if (err)
+		return err;
+
+	/* sec num */
+	val = FIELD_PREP(SPI_NFI_SEC_NUM, as_ctrl->nfi_cfg.sec_num);
+	err = regmap_update_bits(as_ctrl->regmap_nfi, REG_SPI_NFI_CON,
+				 SPI_NFI_SEC_NUM, val);
+	if (err)
+		return err;
+
+	/* enable cust sec size */
+	err = regmap_set_bits(as_ctrl->regmap_nfi, REG_SPI_NFI_SECCUS_SIZE,
+			      SPI_NFI_CUS_SEC_SIZE_EN);
+	if (err)
+		return err;
+
+	/* set cust sec size */
+	val = FIELD_PREP(SPI_NFI_CUS_SEC_SIZE, as_ctrl->nfi_cfg.sec_size);
+	return regmap_update_bits(as_ctrl->regmap_nfi,
+				  REG_SPI_NFI_SECCUS_SIZE,
+				  SPI_NFI_CUS_SEC_SIZE, val);
+}
+
+static bool airoha_snand_is_page_ops(const struct spi_mem_op *op)
+{
+	if (op->addr.nbytes != 2)
+		return false;
+
+	if (op->addr.buswidth != 1 && op->addr.buswidth != 2 &&
+	    op->addr.buswidth != 4)
+		return false;
+
+	switch (op->data.dir) {
+	case SPI_MEM_DATA_IN:
+		if (op->dummy.nbytes * BITS_PER_BYTE / op-&