Merge tag 'regulator-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "The biggest set of changes in here is the addition of the Qualcomm
  RPMH driver. As well as the regualtor driver itself being quite large
  due to the usual involved Qualcomm regulator stuff there's also some
  code shared with the arm-soc tree, a bus driver required to
  communicate with the hardware that actually winds up being much larger
  than the regulator driver itself and a LLCC driver that was part of
  the same signed tag used with the arm-soc tree.

  Other than that it's a fairly standard and quiet release, highlights
  include:

   - Addition of device links from regulator consumers to their
     regulators, helping the core avoid dependency issues during
     suspend.

   - Support for the entertainingly innovative suspend implementation in
     the BD9571MWV.

   - Support for switch regulators on the PFUZE100, this required two
     goes due to backwards compatibility issues with old DTs that were
     discovered.

   - Support for Freescale PFUZE3001 and SocioNext UniPhier.

   - The aforementioned Qualcomm RPMH driver together with the driver
     changes required to support it"

* tag 'regulator-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (52 commits)
  regulator: add QCOM RPMh regulator driver
  regulator: dt-bindings: add QCOM RPMh regulator bindings
  regulator: samsung: Add SPDX license identifiers
  regulator: maxim: Add SPDX license identifiers
  regulator: bd71837: adobt MFD changes to regulator driver
  regulator: tps65217: Fix NULL pointer dereference on probe
  regulator: Add support for CPCAP regulators on Motorola Xoom devices.
  regulator: Add sw2_sw4 voltage table to cpcap regulator.
  regulator: bd9571mwv: Make symbol 'dev_attr_backup_mode' static
  regulator: pfuze100: add support to en-/disable switch regulators
  regulator: pfuze100: add optional disable switch-regulators binding
  soc: qcom: rmtfs-mem: fix memleak in probe error paths
  soc: qcom: llc-slice: Add missing MODULE_LICENSE()
  drivers: qcom: rpmh: fix unwanted error check for get_tcs_of_type()
  drivers: qcom: rpmh-rsc: fix the loop index check in get_req_from_tcs
  firmware: qcom: scm: add a dummy qcom_scm_assign_mem()
  drivers: qcom: rpmh-rsc: Check cmd_db_ready() to help children
  drivers: qcom: rpmh-rsc: allow active requests from wake TCS
  drivers: qcom: rpmh: add support for batch RPMH request
  drivers: qcom: rpmh: allow requests to be sent asynchronously
  ...

3 files changed, 51 insertions, 4 deletions

diff --git a/include/dt-bindings/regulator/maxim,max77802.h b/include/dt-bindings/regulator/maxim,max77802.h
index cf28631d7109..d0baba1973d4 100644
--- a/include/dt-bindings/regulator/maxim,max77802.h
+++ b/include/dt-bindings/regulator/maxim,max77802.h
@@ -1,10 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Copyright (C) 2014 Google, Inc
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  * Device Tree binding constants for the Maxim 77802 PMIC regulators
  */
 
diff --git a/include/dt-bindings/regulator/qcom,rpmh-regulator.h b/include/dt-bindings/regulator/qcom,rpmh-regulator.h
new file mode 100644
index 000000000000..86713dcf9e02
--- /dev/null
+++ b/include/dt-bindings/regulator/qcom,rpmh-regulator.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) 2018, The Linux Foundation. All rights reserved. */
+
+#ifndef __QCOM_RPMH_REGULATOR_H
+#define __QCOM_RPMH_REGULATOR_H
+
+/*
+ * These mode constants may be used to specify modes for various RPMh regulator
+ * device tree properties (e.g. regulator-initial-mode).  Each type of regulator
+ * supports a subset of the possible modes.
+ *
+ * %RPMH_REGULATOR_MODE_RET:	Retention mode in which only an extremely small
+ *				load current is allowed.  This mode is supported
+ *				by LDO and SMPS type regulators.
+ * %RPMH_REGULATOR_MODE_LPM:	Low power mode in which a small load current is
+ *				allowed.  This mode corresponds to PFM for SMPS
+ *				and BOB type regulators.  This mode is supported
+ *				by LDO, HFSMPS, BOB, and PMIC4 FTSMPS type
+ *				regulators.
+ * %RPMH_REGULATOR_MODE_AUTO:	Auto mode in which the regulator hardware
+ *				automatically switches between LPM and HPM based
+ *				upon the real-time load current.  This mode is
+ *				supported by HFSMPS, BOB, and PMIC4 FTSMPS type
+ *				regulators.
+ * %RPMH_REGULATOR_MODE_HPM:	High power mode in which the full rated current
+ *				of the regulator is allowed.  This mode
+ *				corresponds to PWM for SMPS and BOB type
+ *				regulators.  This mode is supported by all types
+ *				of regulators.
+ */
+#define RPMH_REGULATOR_MODE_RET		0
+#define RPMH_REGULATOR_MODE_LPM		1
+#define RPMH_REGULATOR_MODE_AUTO	2
+#define RPMH_REGULATOR_MODE_HPM		3
+
+#endif
diff --git a/include/dt-bindings/soc/qcom,rpmh-rsc.h b/include/dt-bindings/soc/qcom,rpmh-rsc.h
new file mode 100644
index 000000000000..868f998ea998
--- /dev/null
+++ b/include/dt-bindings/soc/qcom,rpmh-rsc.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2016-2018, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef __DT_QCOM_RPMH_RSC_H__
+#define __DT_QCOM_RPMH_RSC_H__
+
+#define SLEEP_TCS	0
+#define WAKE_TCS	1
+#define ACTIVE_TCS	2
+#define CONTROL_TCS	3
+
+#endif /* __DT_QCOM_RPMH_RSC_H__ */