Merge tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - Introduce and use a single page frag cache for allocating small skb
     heads, clawing back the 10-20% performance regression in UDP flood
     test from previous fixes.

   - Run packets which already went thru HW coalescing thru SW GRO. This
     significantly improves TCP segment coalescing and simplifies
     deployments as different workloads benefit from HW or SW GRO.

   - Shrink the size of the base zero-copy send structure.

   - Move TCP init under a new slow / sleepable version of DO_ONCE().

  BPF:

   - Add BPF-specific, any-context-safe memory allocator.

   - Add helpers/kfuncs for PKCS#7 signature verification from BPF
     programs.

   - Define a new map type and related helpers for user space -> kernel
     communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF).

   - Allow targeting BPF iterators to loop through resources of one
     task/thread.

   - Add ability to call selected destructive functions. Expose
     crash_kexec() to allow BPF to trigger a kernel dump. Use
     CAP_SYS_BOOT check on the loading process to judge permissions.

   - Enable BPF to collect custom hierarchical cgroup stats efficiently
     by integrating with the rstat framework.

   - Support struct arguments for trampoline based programs. Only
     structs with size <= 16B and x86 are supported.

   - Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping
     sockets (instead of just TCP and UDP sockets).

   - Add a helper for accessing CLOCK_TAI for time sensitive network
     related programs.

   - Support accessing network tunnel metadata's flags.

   - Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open.

   - Add support for writing to Netfilter's nf_conn:mark.

  Protocols:

   - WiFi: more Extremely High Throughput (EHT) and Multi-Link Operation
     (MLO) work (802.11be, WiFi 7).

   - vsock: improve support for SO_RCVLOWAT.

   - SMC: support SO_REUSEPORT.

   - Netlink: define and document how to use netlink in a "modern" way.
     Support reporting missing attributes via extended ACK.

   - IPSec: support collect metadata mode for xfrm interfaces.

   - TCPv6: send consistent autoflowlabel in SYN_RECV state and RST
     packets.

   - TCP: introduce optional per-netns connection hash table to allow
     better isolation between namespaces (opt-in, at the cost of memory
     and cache pressure).

   - MPTCP: support TCP_FASTOPEN_CONNECT.

   - Add NEXT-C-SID support in Segment Routing (SRv6) End behavior.

   - Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets.

   - Open vSwitch:
      - Allow specifying ifindex of new interfaces.
      - Allow conntrack and metering in non-initial user namespace.

   - TLS: support the Korean ARIA-GCM crypto algorithm.

   - Remove DECnet support.

  Driver API:

   - Allow selecting the conduit interface used by each port in DSA
     switches, at runtime.

   - Ethernet Power Sourcing Equipment and Power Device support.

   - Add tc-taprio support for queueMaxSDU parameter, i.e. setting per
     traffic class max frame size for time-based packet schedules.

   - Support PHY rate matching - adapting between differing host-side
     and link-side speeds.

   - Introduce QUSGMII PHY mode and 1000BASE-KX interface mode.

   - Validate OF (device tree) nodes for DSA shared ports; make
     phylink-related properties mandatory on DSA and CPU ports.
     Enforcing more uniformity should allow transitioning to phylink.

   - Require that flash component name used during update matches one of
     the components for which version is reported by info_get().

   - Remove "weight" argument from driver-facing NAPI API as much as
     possible. It's one of those magic knobs which seemed like a good
     idea at the time but is too indirect to use in practice.

   - Support offload of TLS connections with 256 bit keys.

  New hardware / drivers:

   - Ethernet:
      - Microchip KSZ9896 6-port Gigabit Ethernet Switch
      - Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs
      - Analog Devices ADIN1110 and ADIN2111 industrial single pair
        Ethernet (10BASE-T1L) MAC+PHY.
      - Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP).

   - Ethernet SFPs / modules:
      - RollBall / Hilink / Turris 10G copper SFPs
      - HALNy GPON module

   - WiFi:
      - CYW43439 SDIO chipset (brcmfmac)
      - CYW89459 PCIe chipset (brcmfmac)
      - BCM4378 on Apple platforms (brcmfmac)

  Drivers:

   - CAN:
      - gs_usb: HW timestamp support

   - Ethernet PHYs:
      - lan8814: cable diagnostics

   - Ethernet NICs:
      - Intel (100G):
         - implement control of FCS/CRC stripping
         - port splitting via devlink
         - L2TPv3 filtering offload
      - nVidia/Mellanox:
         - tunnel offload for sub-functions
         - MACSec offload, w/ Extended packet number and replay window
           offload
         - significantly restructure, and optimize the AF_XDP support,
           align the behavior with other vendors
      - Huawei:
         - configuring DSCP map for traffic class selection
         - querying standard FEC statistics
         - querying SerDes lane number via ethtool
      - Marvell/Cavium:
         - egress priority flow control
         - MACSec offload
      - AMD/SolarFlare:
         - PTP over IPv6 and raw Ethernet
      - small / embedded:
         - ax88772: convert to phylink (to support SFP cages)
         - altera: tse: convert to phylink
         - ftgmac100: support fixed link
         - enetc: standard Ethtool counters
         - macb: ZynqMP SGMII dynamic configuration support
         - tsnep: support multi-queue and use page pool
         - lan743x: Rx IP & TCP checksum offload
         - igc: add xdp frags support to ndo_xdp_xmit

   - Ethernet high-speed switches:
      - Marvell (prestera):
         - support SPAN port features (traffic mirroring)
         - nexthop object offloading
      - Microchip (sparx5):
         - multicast forwarding offload
         - QoS queuing offload (tc-mqprio, tc-tbf, tc-ets)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - support RGMII cmode
      - NXP (felix):
         - standardized ethtool counters
      - Microchip (lan966x):
         - QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets)
         - traffic policing and mirroring
         - link aggregation / bonding offload
         - QUSGMII PHY mode support

   - Qualcomm 802.11ax WiFi (ath11k):
      - cold boot calibration support on WCN6750
      - support to connect to a non-transmit MBSSID AP profile
      - enable remain-on-channel support on WCN6750
      - Wake-on-WLAN support for WCN6750
      - support to provide transmit power from firmware via nl80211
      - support to get power save duration for each client
      - spectral scan support for 160 MHz

   - MediaTek WiFi (mt76):
      - WiFi-to-Ethernet bridging offload for MT7986 chips

   - RealTek WiFi (rtw89):
      - P2P support"

* tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1864 commits)
  eth: pse: add missing static inlines
  once: rename _SLOW to _SLEEPABLE
  net: pse-pd: add regulator based PSE driver
  dt-bindings: net: pse-dt: add bindings for regulator based PoDL PSE controller
  ethtool: add interface to interact with Ethernet Power Equipment
  net: mdiobus: search for PSE nodes by parsing PHY nodes.
  net: mdiobus: fwnode_mdiobus_register_phy() rework error handling
  net: add framework to support Ethernet PSE and PDs devices
  dt-bindings: net: phy: add PoDL PSE property
  net: marvell: prestera: Propagate nh state from hw to kernel
  net: marvell: prestera: Add neighbour cache accounting
  net: marvell: prestera: add stub handler neighbour events
  net: marvell: prestera: Add heplers to interact with fib_notifier_info
  net: marvell: prestera: Add length macros for prestera_ip_addr
  net: marvell: prestera: add delayed wq and flush wq on deinit
  net: marvell: prestera: Add strict cleanup of fib arbiter
  net: marvell: prestera: Add cleanup of allocated fib_nodes
  net: marvell: prestera: Add router nexthops ABI
  eth: octeon: fix build after netif_napi_add() changes
  net/mlx5: E-Switch, Return EBUSY if can't get mode lock
  ...

30 files changed, 446 insertions, 340 deletions

diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
index 59a217ca2dfd..51b9aa640ad2 100644
--- a/include/uapi/linux/bpf.h
+++ b/include/uapi/linux/bpf.h
@@ -87,10 +87,35 @@ struct bpf_cgroup_storage_key {
 	__u32	attach_type;		/* program attach type (enum bpf_attach_type) */
 };
 
+enum bpf_cgroup_iter_order {
+	BPF_CGROUP_ITER_ORDER_UNSPEC = 0,
+	BPF_CGROUP_ITER_SELF_ONLY,		/* process only a single object. */
+	BPF_CGROUP_ITER_DESCENDANTS_PRE,	/* walk descendants in pre-order. */
+	BPF_CGROUP_ITER_DESCENDANTS_POST,	/* walk descendants in post-order. */
+	BPF_CGROUP_ITER_ANCESTORS_UP,		/* walk ancestors upward. */
+};
+
 union bpf_iter_link_info {
 	struct {
 		__u32	map_fd;
 	} map;
+	struct {
+		enum bpf_cgroup_iter_order order;
+
+		/* At most one of cgroup_fd and cgroup_id can be non-zero. If
+		 * both are zero, the walk starts from the default cgroup v2
+		 * root. For walking v1 hierarchy, one should always explicitly
+		 * specify cgroup_fd.
+		 */
+		__u32	cgroup_fd;
+		__u64	cgroup_id;
+	} cgroup;
+	/* Parameters of task iterators. */
+	struct {
+		__u32	tid;
+		__u32	pid;
+		__u32	pid_fd;
+	} task;
 };
 
 /* BPF syscall commands, see bpf(2) man-page for more details. */
@@ -909,6 +934,7 @@ enum bpf_map_type {
 	BPF_MAP_TYPE_INODE_STORAGE,
 	BPF_MAP_TYPE_TASK_STORAGE,
 	BPF_MAP_TYPE_BLOOM_FILTER,
+	BPF_MAP_TYPE_USER_RINGBUF,
 };
 
 /* Note that tracing related programs such as
@@ -1233,7 +1259,7 @@ enum {
 
 /* Query effective (directly attached + inherited from ancestor cgroups)
  * programs that will be executed for events within a cgroup.
- * attach_flags with this flag are returned only for directly attached programs.
+ * attach_flags with this flag are always returned 0.
  */
 #define BPF_F_QUERY_EFFECTIVE	(1U << 0)
 
@@ -1432,7 +1458,10 @@ union bpf_attr {
 		__u32		attach_flags;
 		__aligned_u64	prog_ids;
 		__u32		prog_cnt;
-		__aligned_u64	prog_attach_flags; /* output: per-program attach_flags */
+		/* output: per-program attach_flags.
+		 * not allowed to be set during effective query.
+		 */
+		__aligned_u64	prog_attach_flags;
 	} query;
 
 	struct { /* anonymous struct used by BPF_RAW_TRACEPOINT_OPEN command */
@@ -2573,10 +2602,12 @@ union bpf_attr {
  *		There are two supported modes at this time:
  *
  *		* **BPF_ADJ_ROOM_MAC**: Adjust room at the mac layer
- *		  (room space is added or removed below the layer 2 header).
+ * 		  (room space is added or removed between the layer 2 and
+ * 		  layer 3 headers).
  *
  * 		* **BPF_ADJ_ROOM_NET**: Adjust room at the network layer
- * 		  (room space is added or removed below the layer 3 header).
+ * 		  (room space is added or removed between the layer 3 and
+ * 		  layer 4 headers).
  *
  *		The following flags are supported at this time:
  *
@@ -3008,8 +3039,18 @@ union bpf_attr {
  * 		**BPF_F_USER_STACK**
  * 			Collect a user space stack instead of a kernel stack.
  * 		**BPF_F_USER_BUILD_ID**
- * 			Collect buildid+offset instead of ips for user stack,
- * 			only valid if **BPF_F_USER_STACK** is also specified.
+ * 			Collect (build_id, file_offset) instead of ips for user
+ * 			stack, only valid if **BPF_F_USER_STACK** is also
+ * 			specified.
+ *
+ * 			*file_offset* is an offset relative to the beginning
+ * 			of the executable or shared object file backing the vma
+ * 			which the *ip* falls in. It is *not* an offset relative
+ * 			to that object's base address. Accordingly, it must be
+ * 			adjusted by adding (sh_addr - sh_offset), where
+ * 			sh_{addr,offset} correspond to the executable section
+ * 			containing *file_offset* in the object, for comparisons
+ * 			to symbols' st_value to be valid.
  *
  * 		**bpf_get_stack**\ () can collect up to
  * 		**PERF_MAX_STACK_DEPTH** both kernel and user frames, subject
@@ -4425,7 +4466,7 @@ union bpf_attr {
  *
  *		**-EEXIST** if the option already exists.
  *
- *		**-EFAULT** on failrue to parse the existing header options.
+ *		**-EFAULT** on failure to parse the existing header options.
  *
  *		**-EPERM** if the helper cannot be used under the current
  *		*skops*\ **->op**.
@@ -4634,7 +4675,7 @@ union bpf_attr {
  *		a *map* with *task* as the **key**.  From this
  *		perspective,  the usage is not much different from
  *		**bpf_map_lookup_elem**\ (*map*, **&**\ *task*) except this
- *		helper enforces the key must be an task_struct and the map must also
+ *		helper enforces the key must be a task_struct and the map must also
  *		be a **BPF_MAP_TYPE_TASK_STORAGE**.
  *
  *		Underneath, the value is stored locally at *task* instead of
@@ -4692,7 +4733,7 @@ union bpf_attr {
  *
  * long bpf_ima_inode_hash(struct inode *inode, void *dst, u32 size)
  *	Description
- *		Returns the stored IMA hash of the *inode* (if it's avaialable).
+ *		Returns the stored IMA hash of the *inode* (if it's available).
  *		If the hash is larger than *size*, then only *size*
  *		bytes will be copied to *dst*
  *	Return
@@ -4716,12 +4757,12 @@ union bpf_attr {
  *
  *		The argument *len_diff* can be used for querying with a planned
  *		size change. This allows to check MTU prior to changing packet
- *		ctx. Providing an *len_diff* adjustment that is larger than the
+ *		ctx. Providing a *len_diff* adjustment that is larger than the
  *		actual packet size (resulting in negative packet size) will in
- *		principle not exceed the MTU, why it is not considered a
- *		failure.  Other BPF-helpers are needed for performing the
- *		planned size change, why the responsability for catch a negative
- *		packet size belong in those helpers.
+ *		principle not exceed the MTU, which is why it is not considered
+ *		a failure.  Other BPF helpers are needed for performing the
+ *		planned size change; therefore the responsibility for catching
+ *		a negative packet size belongs in those helpers.
  *
  *		Specifying *ifindex* zero means the MTU check is performed
  *		against the current net device.  This is practical if this isn't
@@ -4919,6 +4960,7 @@ union bpf_attr {
  * 		Get address of the traced function (for tracing and kprobe programs).
  * 	Return
  * 		Address of the traced function.
+ * 		0 for kprobes placed within the function (not at the entry).
  *
  * u64 bpf_get_attach_cookie(void *ctx)
  * 	Description
@@ -5048,12 +5090,12 @@ union bpf_attr {
  *
  * long bpf_get_func_arg(void *ctx, u32 n, u64 *value)
  *	Description
- *		Get **n**-th argument (zero based) of the traced function (for tracing programs)
+ *		Get **n**-th argument register (zero based) of the traced function (for tracing programs)
  *		returned in **value**.
  *
  *	Return
  *		0 on success.
- *		**-EINVAL** if n >= arguments count of traced function.
+ *		**-EINVAL** if n >= argument register count of traced function.
  *
  * long bpf_get_func_ret(void *ctx, u64 *value)
  *	Description
@@ -5066,24 +5108,37 @@ union bpf_attr {
  *
  * long bpf_get_func_arg_cnt(void *ctx)
  *	Description
- *		Get number of arguments of the traced function (for tracing programs).
+ *		Get number of registers of the traced function (for tracing programs) where
+ *		function arguments are stored in these registers.
  *
  *	Return
- *		The number of arguments of the traced function.
+ *		The number of argument registers of the traced function.
  *
  * int bpf_get_retval(void)
  *	Description
- *		Get the syscall's return value that will be returned to userspace.
+ *		Get the BPF program's return value that will be returned to the upper layers.
  *
- *		This helper is currently supported by cgroup programs only.
+ *		This helper is currently supported by cgroup programs and only by the hooks
+ *		where BPF program's return value is returned to the userspace via errno.
  *	Return
- *		The syscall's return value.
+ *		The BPF program's return value.
  *
  * int bpf_set_retval(int retval)
  *	Description
- *		Set the syscall's return value that will be returned to userspace.
+ *		Set the BPF program's return value that will be returned to the upper layers.
+ *
+ *		This helper is currently supported by cgroup programs and only by the hooks
+ *		where BPF program's return value is returned to the userspace via errno.
+ *
+ *		Note that there is the following corner case where the program exports an error
+ *		via bpf_set_retval but signals success via 'return 1':
+ *
+ *			bpf_set_retval(-EPERM);
+ *			return 1;
+ *
+ *		In this case, the BPF program's return value will use helper's -EPERM. This
+ *		still holds true for cgroup/bind{4,6} which supports extra 'return 3' success case.
  *
- *		This helper is currently supported by cgroup programs only.
  *	Return
  *		0 on success, or a negative error in case of failure.
  *
@@ -5331,6 +5386,55 @@ union bpf_attr {
  *		**-EACCES** if the SYN cookie is not valid.
  *
  *		**-EPROTONOSUPPORT** if CONFIG_IPV6 is not builtin.
+ *
+ * u64 bpf_ktime_get_tai_ns(void)
+ *	Description
+ *		A nonsettable system-wide clock derived from wall-clock time but
+ *		ignoring leap seconds.  This clock does not experience
+ *		discontinuities and backwards jumps caused by NTP inserting leap
+ *		seconds as CLOCK_REALTIME does.
+ *
+ *		See: **clock_gettime**\ (**CLOCK_TAI**)
+ *	Return
+ *		Current *ktime*.
+ *
+ * long bpf_user_ringbuf_drain(struct bpf_map *map, void *callback_fn, void *ctx, u64 flags)
+ *	Description
+ *		Drain samples from the specified user ring buffer, and invoke
+ *		the provided callback for each such sample:
+ *
+ *		long (\*callback_fn)(struct bpf_dynptr \*dynptr, void \*ctx);
+ *
+ *		If **callback_fn** returns 0, the helper will continue to try
+ *		and drain the next sample, up to a maximum of
+ *		BPF_MAX_USER_RINGBUF_SAMPLES samples. If the return value is 1,
+ *		the helper will skip the rest of the samples and return. Other
+ *		return values are not used now, and will be rejected by the
+ *		verifier.
+ *	Return
+ *		The number of drained samples if no error was encountered while
+ *		draining samples, or 0 if no samples were present in the ring
+ *		buffer. If a user-space producer was epoll-waiting on this map,
+ *		and at least one sample was drained, they will receive an event
+ *		notification notifying them of available space in the ring
+ *		buffer. If the BPF_RB_NO_WAKEUP flag is passed to this
+ *		function, no wakeup notification will be sent. If the
+ *		BPF_RB_FORCE_WAKEUP flag is passed, a wakeup notification will
+ *		be sent even if no sample was drained.
+ *
+ *		On failure, the returned value is one of the following:
+ *
+ *		**-EBUSY** if the ring buffer is contended, and another calling
+ *		context was concurrently draining the ring buffer.
+ *
+ *		**-EINVAL** if user-space is not properly tracking the ring
+ *		buffer due to the producer position not being aligned to 8
+ *		bytes, a sample not being aligned to 8 bytes, or the producer
+ *		position not matching the advertised length of a sample.
+ *
+ *		**-E2BIG** if user-space has tried to publish a sample which is
+ *		larger than the size of the ring buffer, or which cannot fit
+ *		within a struct bpf_dynptr.
  */
 #define __BPF_FUNC_MAPPER(FN)		\
 	FN(unspec),			\
@@ -5541,6 +5645,8 @@ union bpf_attr {
 	FN(tcp_raw_gen_syncookie_ipv6),	\
 	FN(tcp_raw_check_syncookie_ipv4),	\
 	FN(tcp_raw_check_syncookie_ipv6),	\
+	FN(ktime_get_tai_ns),		\
+	FN(user_ringbuf_drain),		\
 	/* */
 
 /* integer value in 'imm' field of BPF_CALL instruction selects which helper
@@ -5603,6 +5709,11 @@ enum {
 	BPF_F_SEQ_NUMBER		= (1ULL << 3),
 };
 
+/* BPF_FUNC_skb_get_tunnel_key flags. */
+enum {
+	BPF_F_TUNINFO_FLAGS		= (1ULL << 4),
+};
+
 /* BPF_FUNC_perf_event_output, BPF_FUNC_perf_event_read and
  * BPF_FUNC_perf_event_read_value flags.
  */
@@ -5792,7 +5903,10 @@ struct bpf_tunnel_key {
 	};
 	__u8 tunnel_tos;
 	__u8 tunnel_ttl;
-	__u16 tunnel_ext;	/* Padding, future use. */
+	union {
+		__u16 tunnel_ext;	/* compat */
+		__be16 tunnel_flags;
+	};
 	__u32 tunnel_label;
 	union {
 		__u32 local_ipv4;
@@ -5836,6 +5950,11 @@ enum bpf_ret_code {
 	 *    represented by BPF_REDIRECT above).
 	 */
 	BPF_LWT_REROUTE = 128,
+	/* BPF_FLOW_DISSECTOR_CONTINUE: used by BPF_PROG_TYPE_FLOW_DISSECTOR
+	 *   to indicate that no custom dissection was performed, and
+	 *   fallback to standard dissector is requested.
+	 */
+	BPF_FLOW_DISSECTOR_CONTINUE = 129,
 };
 
 struct bpf_sock {
@@ -6134,11 +6253,26 @@ struct bpf_link_info {
 		struct {
 			__aligned_u64 target_name; /* in/out: target_name buffer ptr */
 			__u32 target_name_len;	   /* in/out: target_name buffer len */
+
+			/* If the iter specific field is 32 bits, it can be put
+			 * in the first or second union. Otherwise it should be
+			 * put in the second union.
+			 */
 			union {
 				struct {
 					__u32 map_id;
 				} map;
 			};
+			union {
+				struct {
+					__u64 cgroup_id;
+					__u32 order;
+				} cgroup;
+				struct {
+					__u32 tid;
+					__u32 pid;
+				} task;
+			};
 		} iter;
 		struct  {
 			__u32 netns_ino;
diff --git a/include/uapi/linux/can.h b/include/uapi/linux/can.h
index 90801ada2bbe..dd645ea72306 100644
--- a/include/uapi/linux/can.h
+++ b/include/uapi/linux/can.h
@@ -48,6 +48,7 @@
 
 #include <linux/types.h>
 #include <linux/socket.h>
+#include <linux/stddef.h> /* for offsetof */
 
 /* controller area network (CAN) kernel definitions */
 
@@ -60,6 +61,7 @@
 #define CAN_SFF_MASK 0x000007FFU /* standard frame format (SFF) */
 #define CAN_EFF_MASK 0x1FFFFFFFU /* extended frame format (EFF) */
 #define CAN_ERR_MASK 0x1FFFFFFFU /* omit EFF, RTR, ERR flags */
+#define CANXL_PRIO_MASK CAN_SFF_MASK /* 11 bit priority mask */
 
 /*
  * Controller Area Network Identifier structure
@@ -73,6 +75,7 @@ typedef __u32 canid_t;
 
 #define CAN_SFF_ID_BITS		11
 #define CAN_EFF_ID_BITS		29
+#define CANXL_PRIO_BITS		CAN_SFF_ID_BITS
 
 /*
  * Controller Area Network Error Message Frame Mask structure
@@ -91,6 +94,16 @@ typedef __u32 can_err_mask_t;
 #define CANFD_MAX_DLC 15
 #define CANFD_MAX_DLEN 64
 
+/*
+ * CAN XL payload length and DLC definitions according to ISO 11898-1
+ * CAN XL DLC ranges from 0 .. 2047 => data length from 1 .. 2048 byte
+ */
+#define CANXL_MIN_DLC 0
+#define CANXL_MAX_DLC 2047
+#define CANXL_MAX_DLC_MASK 0x07FF
+#define CANXL_MIN_DLEN 1
+#define CANXL_MAX_DLEN 2048
+
 /**
  * struct can_frame - Classical CAN frame structure (aka CAN 2.0B)
  * @can_id:   CAN ID of the frame and CAN_*_FLAG flags, see canid_t definition
@@ -141,8 +154,8 @@ struct can_frame {
  * When this is done the former differentiation via CAN_MTU / CANFD_MTU gets
  * lost. CANFD_FDF allows programmers to mark CAN FD frames in the case of
  * using struct canfd_frame for mixed CAN / CAN FD content (dual use).
- * N.B. the Kernel APIs do NOT provide mixed CAN / CAN FD content inside of
- * struct canfd_frame therefore the CANFD_FDF flag is disregarded by Linux.
+ * Since the introduction of CAN XL the CANFD_FDF flag is set in all CAN FD
+ * frame structures provided by the CAN subsystem of the Linux kernel.
  */
 #define CANFD_BRS 0x01 /* bit rate switch (second bitrate for payload data) */
 #define CANFD_ESI 0x02 /* error state indicator of the transmitting node */
@@ -166,8 +179,46 @@ struct canfd_frame {
 	__u8    data[CANFD_MAX_DLEN] __attribute__((aligned(8)));
 };
 
+/*
+ * defined bits for canxl_frame.flags
+ *
+ * The canxl_frame.flags element contains two bits CANXL_XLF and CANXL_SEC
+ * and shares the relative position of the struct can[fd]_frame.len element.
+ * The CANXL_XLF bit ALWAYS needs to be set to indicate a valid CAN XL frame.
+ * As a side effect setting this bit intentionally breaks the length checks
+ * for Classical CAN and CAN FD frames.
+ *
+ * Undefined bits in canxl_frame.flags are reserved and shall be set to zero.
+ */
+#define CANXL_XLF 0x80 /* mandatory CAN XL frame flag (must always be set!) */
+#define CANXL_SEC 0x01 /* Simple Extended Content (security/segmentation) */
+
+/**
+ * struct canxl_frame - CAN with e'X'tended frame 'L'ength frame structure
+ * @prio:  11 bit arbitration priority with zero'ed CAN_*_FLAG flags
+ * @flags: additional flags for CAN XL
+ * @sdt:   SDU (service data unit) type
+ * @len:   frame payload length in byte (CANXL_MIN_DLEN .. CANXL_MAX_DLEN)
+ * @af:    acceptance field
+ * @data:  CAN XL frame payload (CANXL_MIN_DLEN .. CANXL_MAX_DLEN byte)
+ *
+ * @prio shares the same position as @can_id from struct can[fd]_frame.
+ */
+struct canxl_frame {
+	canid_t prio;  /* 11 bit priority for arbitration (canid_t) */
+	__u8    flags; /* additional flags for CAN XL */
+	__u8    sdt;   /* SDU (service data unit) type */
+	__u16   len;   /* frame payload length in byte */
+	__u32   af;    /* acceptance field */
+	__u8    data[CANXL_MAX_DLEN];
+};
+
 #define CAN_MTU		(sizeof(struct can_frame))
 #define CANFD_MTU	(sizeof(struct canfd_frame))
+#define CANXL_MTU	(sizeof(struct canxl_frame))
+#define CANXL_HDR_SIZE	(offsetof(struct canxl_frame, data))
+#define CANXL_MIN_MTU	(CANXL_HDR_SIZE + 64)
+#define CANXL_MAX_MTU	CANXL_MTU
 
 /* particular protocols of the protocol family PF_CAN */
 #define CAN_RAW		1 /* RAW sockets */
diff --git a/include/uapi/linux/can/raw.h b/include/uapi/linux/can/raw.h
index 3386aa81fdf2..ff12f525c37c 100644
--- a/include/uapi/linux/can/raw.h
+++ b/include/uapi/linux/can/raw.h
@@ -62,6 +62,7 @@ enum {
 	CAN_RAW_RECV_OWN_MSGS,	/* receive my own msgs (default:off) */
 	CAN_RAW_FD_FRAMES,	/* allow CAN FD frames (default:off) */
 	CAN_RAW_JOIN_FILTERS,	/* all filters must match to trigger */
+	CAN_RAW_XL_FRAMES,	/* allow CAN XL frames (default:off) */
 };
 
 #endif /* !_UAPI_CAN_RAW_H */
diff --git a/include/uapi/linux/dn.h b/include/uapi/linux/dn.h
deleted file mode 100644
index 36ca71bd8bbe..000000000000
--- a/include/uapi/linux/dn.h
+++ /dev/null
@@ -1,149 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef _LINUX_DN_H
-#define _LINUX_DN_H
-
-#include <linux/ioctl.h>
-#include <linux/types.h>
-#include <linux/if_ether.h>
-
-/*
-
-	DECnet Data Structures and Constants
-
-*/
-
-/* 
- * DNPROTO_NSP can't be the same as SOL_SOCKET, 
- * so increment each by one (compared to ULTRIX)
- */
-#define DNPROTO_NSP     2                       /* NSP protocol number       */
-#define DNPROTO_ROU     3                       /* Routing protocol number   */
-#define DNPROTO_NML     4                       /* Net mgt protocol number   */
-#define DNPROTO_EVL     5                       /* Evl protocol number (usr) */
-#define DNPROTO_EVR     6                       /* Evl protocol number (evl) */
-#define DNPROTO_NSPT    7                       /* NSP trace protocol number */
-
-
-#define DN_ADDL		2
-#define DN_MAXADDL	2 /* ULTRIX headers have 20 here, but pathworks has 2 */
-#define DN_MAXOPTL	16
-#define DN_MAXOBJL	16
-#define DN_MAXACCL	40
-#define DN_MAXALIASL	128
-#define DN_MAXNODEL	256
-#define DNBUFSIZE	65023
-
-/* 
- * SET/GET Socket options  - must match the DSO_ numbers below
- */
-#define SO_CONDATA      1
-#define SO_CONACCESS    2
-#define SO_PROXYUSR     3
-#define SO_LINKINFO     7
-
-#define DSO_CONDATA     1        /* Set/Get connect data                */
-#define DSO_DISDATA     10       /* Set/Get disconnect data             */
-#define DSO_CONACCESS   2        /* Set/Get connect access data         */
-#define DSO_ACCEPTMODE  4        /* Set/Get accept mode                 */
-#define DSO_CONACCEPT   5        /* Accept deferred connection          */
-#define DSO_CONREJECT   6        /* Reject deferred connection          */
-#define DSO_LINKINFO    7        /* Set/Get link information            */
-#define DSO_STREAM      8        /* Set socket type to stream           */
-#define DSO_SEQPACKET   9        /* Set socket type to sequenced packet */
-#define DSO_MAXWINDOW   11       /* Maximum window size allowed         */
-#define DSO_NODELAY	12       /* Turn off nagle                      */
-#define DSO_CORK        13       /* Wait for more data!                 */
-#define DSO_SERVICES	14       /* NSP Services field                  */
-#define DSO_INFO	15       /* NSP Info field                      */
-#define DSO_MAX         15       /* Maximum option number               */
-
-
-/* LINK States */
-#define LL_INACTIVE	0
-#define LL_CONNECTING	1
-#define LL_RUNNING	2
-#define LL_DISCONNECTING 3
-
-#define ACC_IMMED 0
-#define ACC_DEFER 1
-
-#define SDF_WILD        1                  /* Wild card object          */
-#define SDF_PROXY       2                  /* Addr eligible for proxy   */
-#define SDF_UICPROXY    4                  /* Use uic-based proxy       */
-
-/* Structures */
-
-
-struct dn_naddr {
-	__le16		a_len;
-	__u8 a_addr[DN_MAXADDL]; /* Two bytes little endian */
-};
-
-struct sockaddr_dn {
-	__u16		sdn_family;
-	__u8		sdn_flags;
-	__u8		sdn_objnum;
-	__le16		sdn_objnamel;
-	__u8		sdn_objname[DN_MAXOBJL];
-	struct   dn_naddr	sdn_add;
-};
-#define sdn_nodeaddrl   sdn_add.a_len   /* Node address length  */
-#define sdn_nodeaddr    sdn_add.a_addr  /* Node address         */
-
-
-
-/*
- * DECnet set/get DSO_CONDATA, DSO_DISDATA (optional data) structure
- */
-struct optdata_dn {
-        __le16  opt_status;     /* Extended status return */
-#define opt_sts opt_status
-        __le16  opt_optl;       /* Length of user data    */
-        __u8   opt_data[16];   /* User data              */
-};
-
-struct accessdata_dn {
-	__u8		acc_accl;
-	__u8		acc_acc[DN_MAXACCL];
-	__u8 		acc_passl;
-	__u8		acc_pass[DN_MAXACCL];
-	__u8 		acc_userl;
-	__u8		acc_user[DN_MAXACCL];
-};
-
-/*
- * DECnet logical link information structure
- */
-struct linkinfo_dn {
-        __u16  idn_segsize;    /* Segment size for link */
-        __u8   idn_linkstate;  /* Logical link state    */
-};
-
-/*
- * Ethernet address format (for DECnet)
- */
-union etheraddress {
-        __u8 dne_addr[ETH_ALEN];      /* Full ethernet address */
-  struct {
-                __u8 dne_hiord[4];    /* DECnet HIORD prefix   */
-                __u8 dne_nodeaddr[2]; /* DECnet node address   */
-  } dne_remote;
-};
-
-
-/*
- * DECnet physica