Merge tag 'v3.15' into next

Linux 3.15

49 files changed, 1477 insertions, 242 deletions

diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild
index 3ce25b5d75a9..6929571b79b0 100644
--- a/include/uapi/linux/Kbuild
+++ b/include/uapi/linux/Kbuild
@@ -139,6 +139,7 @@ header-y += hid.h
 header-y += hiddev.h
 header-y += hidraw.h
 header-y += hpet.h
+header-y += hyperv.h
 header-y += hysdn_if.h
 header-y += i2c-dev.h
 header-y += i2c.h
diff --git a/include/uapi/linux/audit.h b/include/uapi/linux/audit.h
index 2d48fe1274ca..4c31a366be16 100644
--- a/include/uapi/linux/audit.h
+++ b/include/uapi/linux/audit.h
@@ -70,7 +70,6 @@
 #define AUDIT_TTY_SET		1017	/* Set TTY auditing status */
 #define AUDIT_SET_FEATURE	1018	/* Turn an audit feature on or off */
 #define AUDIT_GET_FEATURE	1019	/* Get which features are enabled */
-#define AUDIT_FEATURE_CHANGE	1020	/* audit log listing feature changes */
 
 #define AUDIT_FIRST_USER_MSG	1100	/* Userspace messages mostly uninteresting to kernel */
 #define AUDIT_USER_AVC		1107	/* We filter this differently */
@@ -109,6 +108,8 @@
 #define AUDIT_NETFILTER_PKT	1324	/* Packets traversing netfilter chains */
 #define AUDIT_NETFILTER_CFG	1325	/* Netfilter chain modifications */
 #define AUDIT_SECCOMP		1326	/* Secure Computing event */
+#define AUDIT_PROCTITLE		1327	/* Proctitle emit event */
+#define AUDIT_FEATURE_CHANGE	1328	/* audit log listing feature changes */
 
 #define AUDIT_AVC		1400	/* SE Linux avc denial or grant */
 #define AUDIT_SELINUX_ERR	1401	/* Internal SE Linux Errors */
@@ -330,9 +331,17 @@ enum {
 #define AUDIT_FAIL_PRINTK	1
 #define AUDIT_FAIL_PANIC	2
 
+/*
+ * These bits disambiguate different calling conventions that share an
+ * ELF machine type, bitness, and endianness
+ */
+#define __AUDIT_ARCH_CONVENTION_MASK 0x30000000
+#define __AUDIT_ARCH_CONVENTION_MIPS64_N32 0x20000000
+
 /* distinguish syscall tables */
 #define __AUDIT_ARCH_64BIT 0x80000000
 #define __AUDIT_ARCH_LE	   0x40000000
+
 #define AUDIT_ARCH_ALPHA	(EM_ALPHA|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
 #define AUDIT_ARCH_ARM		(EM_ARM|__AUDIT_ARCH_LE)
 #define AUDIT_ARCH_ARMEB	(EM_ARM)
@@ -345,7 +354,11 @@ enum {
 #define AUDIT_ARCH_MIPS		(EM_MIPS)
 #define AUDIT_ARCH_MIPSEL	(EM_MIPS|__AUDIT_ARCH_LE)
 #define AUDIT_ARCH_MIPS64	(EM_MIPS|__AUDIT_ARCH_64BIT)
+#define AUDIT_ARCH_MIPS64N32	(EM_MIPS|__AUDIT_ARCH_64BIT|\
+				 __AUDIT_ARCH_CONVENTION_MIPS64_N32)
 #define AUDIT_ARCH_MIPSEL64	(EM_MIPS|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
+#define AUDIT_ARCH_MIPSEL64N32	(EM_MIPS|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE|\
+				 __AUDIT_ARCH_CONVENTION_MIPS64_N32)
 #define AUDIT_ARCH_OPENRISC	(EM_OPENRISC)
 #define AUDIT_ARCH_PARISC	(EM_PARISC)
 #define AUDIT_ARCH_PARISC64	(EM_PARISC|__AUDIT_ARCH_64BIT)
diff --git a/include/uapi/linux/can.h b/include/uapi/linux/can.h
index e52958d7c2d1..5d9d1d140718 100644
--- a/include/uapi/linux/can.h
+++ b/include/uapi/linux/can.h
@@ -8,6 +8,38 @@
  * Copyright (c) 2002-2007 Volkswagen Group Electronic Research
  * All rights reserved.
  *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of Volkswagen nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * Alternatively, provided that this notice is retained in full, this
+ * software may be distributed under the terms of the GNU General
+ * Public License ("GPL") version 2, in which case the provisions of the
+ * GPL apply INSTEAD OF those given above.
+ *
+ * The provided data structures and external interfaces from this code
+ * are not restricted to be used by modules with a GPL compatible license.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
  */
 
 #ifndef CAN_H
diff --git a/include/uapi/linux/can/netlink.h b/include/uapi/linux/can/netlink.h
index df944ed206a8..7e2e1863db16 100644
--- a/include/uapi/linux/can/netlink.h
+++ b/include/uapi/linux/can/netlink.h
@@ -96,6 +96,7 @@ struct can_ctrlmode {
 #define CAN_CTRLMODE_3_SAMPLES		0x04	/* Triple sampling mode */
 #define CAN_CTRLMODE_ONE_SHOT		0x08	/* One-Shot mode */
 #define CAN_CTRLMODE_BERR_REPORTING	0x10	/* Bus-error reporting */
+#define CAN_CTRLMODE_FD			0x20	/* CAN FD mode */
 
 /*
  * CAN device statistics
@@ -122,6 +123,8 @@ enum {
 	IFLA_CAN_RESTART_MS,
 	IFLA_CAN_RESTART,
 	IFLA_CAN_BERR_COUNTER,
+	IFLA_CAN_DATA_BITTIMING,
+	IFLA_CAN_DATA_BITTIMING_CONST,
 	__IFLA_CAN_MAX
 };
 
diff --git a/include/uapi/linux/capability.h b/include/uapi/linux/capability.h
index ba478fa3012e..154dd6d3c8fe 100644
--- a/include/uapi/linux/capability.h
+++ b/include/uapi/linux/capability.h
@@ -308,8 +308,12 @@ struct vfs_cap_data {
 
 #define CAP_LEASE            28
 
+/* Allow writing the audit log via unicast netlink socket */
+
 #define CAP_AUDIT_WRITE      29
 
+/* Allow configuration of audit via unicast netlink socket */
+
 #define CAP_AUDIT_CONTROL    30
 
 #define CAP_SETFCAP	     31
diff --git a/include/uapi/linux/capi.h b/include/uapi/linux/capi.h
index 65100d6cb89b..7b145fd7afb6 100644
--- a/include/uapi/linux/capi.h
+++ b/include/uapi/linux/capi.h
@@ -102,7 +102,7 @@ typedef struct capi_manufacturer_cmd {
 
 /*
  * member contr is input for
- * CAPI_GET_MANUFACTURER, CAPI_VERSION, CAPI_GET_SERIAL
+ * CAPI_GET_MANUFACTURER, CAPI_GET_VERSION, CAPI_GET_SERIAL
  * and CAPI_GET_PROFILE
  */
 typedef union capi_ioctl_struct {
diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h
index 38dbafaa5341..fd161e91b6d7 100644
--- a/include/uapi/linux/ethtool.h
+++ b/include/uapi/linux/ethtool.h
@@ -16,37 +16,97 @@
 #include <linux/types.h>
 #include <linux/if_ether.h>
 
-/* This should work for both 32 and 64 bit userland. */
+/* All structures exposed to userland should be defined such that they
+ * have the same layout for 32-bit and 64-bit userland.
+ */
+
+/**
+ * struct ethtool_cmd - link control and status
+ * @cmd: Command number = %ETHTOOL_GSET or %ETHTOOL_SSET
+ * @supported: Bitmask of %SUPPORTED_* flags for the link modes,
+ *	physical connectors and other link features for which the
+ *	interface supports autonegotiation or auto-detection.
+ *	Read-only.
+ * @advertising: Bitmask of %ADVERTISED_* flags for the link modes,
+ *	physical connectors and other link features that are
+ *	advertised through autonegotiation or enabled for
+ *	auto-detection.
+ * @speed: Low bits of the speed
+ * @duplex: Duplex mode; one of %DUPLEX_*
+ * @port: Physical connector type; one of %PORT_*
+ * @phy_address: MDIO address of PHY (transceiver); 0 or 255 if not
+ *	applicable.  For clause 45 PHYs this is the PRTAD.
+ * @transceiver: Historically used to distinguish different possible
+ *	PHY types, but not in a consistent way.  Deprecated.
+ * @autoneg: Enable/disable autonegotiation and auto-detection;
+ *	either %AUTONEG_DISABLE or %AUTONEG_ENABLE
+ * @mdio_support: Bitmask of %ETH_MDIO_SUPPORTS_* flags for the MDIO
+ *	protocols supported by the interface; 0 if unknown.
+ *	Read-only.
+ * @maxtxpkt: Historically used to report TX IRQ coalescing; now
+ *	obsoleted by &struct ethtool_coalesce.  Read-only; deprecated.
+ * @maxrxpkt: Historically used to report RX IRQ coalescing; now
+ *	obsoleted by &struct ethtool_coalesce.  Read-only; deprecated.
+ * @speed_hi: High bits of the speed
+ * @eth_tp_mdix: Ethernet twisted-pair MDI(-X) status; one of
+ *	%ETH_TP_MDI_*.  If the status is unknown or not applicable, the
+ *	value will be %ETH_TP_MDI_INVALID.  Read-only.
+ * @eth_tp_mdix_ctrl: Ethernet twisted pair MDI(-X) control; one of
+ *	%ETH_TP_MDI_*.  If MDI(-X) control is not implemented, reads
+ *	yield %ETH_TP_MDI_INVALID and writes may be ignored or rejected.
+ *	When written successfully, the link should be renegotiated if
+ *	necessary.
+ * @lp_advertising: Bitmask of %ADVERTISED_* flags for the link modes
+ *	and other link features that the link partner advertised
+ *	through autonegotiation; 0 if unknown or not applicable.
+ *	Read-only.
+ *
+ * The link speed in Mbps is split between @speed and @speed_hi.  Use
+ * the ethtool_cmd_speed() and ethtool_cmd_speed_set() functions to
+ * access it.
+ *
+ * If autonegotiation is disabled, the speed and @duplex represent the
+ * fixed link mode and are writable if the driver supports multiple
+ * link modes.  If it is enabled then they are read-only; if the link
+ * is up they represent the negotiated link mode; if the link is down,
+ * the speed is 0, %SPEED_UNKNOWN or the highest enabled speed and
+ * @duplex is %DUPLEX_UNKNOWN or the best enabled duplex mode.
+ *
+ * Some hardware interfaces may have multiple PHYs and/or physical
+ * connectors fitted or do not allow the driver to detect which are
+ * fitted.  For these interfaces @port and/or @phy_address may be
+ * writable, possibly dependent on @autoneg being %AUTONEG_DISABLE.
+ * Otherwise, attempts to write different values may be ignored or
+ * rejected.
+ *
+ * Users should assume that all fields not marked read-only are
+ * writable and subject to validation by the driver.  They should use
+ * %ETHTOOL_GSET to get the current values before making specific
+ * changes and then applying them with %ETHTOOL_SSET.
+ *
+ * Drivers that implement set_settings() should validate all fields
+ * other than @cmd that are not described as read-only or deprecated,
+ * and must ignore all fields described as read-only.
+ *
+ * Deprecated fields should be ignored by both users and drivers.
+ */
 struct ethtool_cmd {
 	__u32	cmd;
-	__u32	supported;	/* Features this interface supports */
-	__u32	advertising;	/* Features this interface advertises */
-	__u16	speed;	        /* The forced speed (lower bits) in
-				 * Mbps. Please use
-				 * ethtool_cmd_speed()/_set() to
-				 * access it */
-	__u8	duplex;		/* Duplex, half or full */
-	__u8	port;		/* Which connector port */
-	__u8	phy_address;	/* MDIO PHY address (PRTAD for clause 45).
-				 * May be read-only or read-write
-				 * depending on the driver.
-				 */
-	__u8	transceiver;	/* Which transceiver to use */
-	__u8	autoneg;	/* Enable or disable autonegotiation */
-	__u8	mdio_support;	/* MDIO protocols supported.  Read-only.
-				 * Not set by all drivers.
-				 */
-	__u32	maxtxpkt;	/* Tx pkts before generating tx int */
-	__u32	maxrxpkt;	/* Rx pkts before generating rx int */
-	__u16	speed_hi;       /* The forced speed (upper
-				 * bits) in Mbps. Please use
-				 * ethtool_cmd_speed()/_set() to
-				 * access it */
-	__u8	eth_tp_mdix;	/* twisted pair MDI-X status */
-	__u8    eth_tp_mdix_ctrl; /* twisted pair MDI-X control, when set,
-				   * link should be renegotiated if necessary
-				   */
-	__u32	lp_advertising;	/* Features the link partner advertises */
+	__u32	supported;
+	__u32	advertising;
+	__u16	speed;
+	__u8	duplex;
+	__u8	port;
+	__u8	phy_address;
+	__u8	transceiver;
+	__u8	autoneg;
+	__u8	mdio_support;
+	__u32	maxtxpkt;
+	__u32	maxrxpkt;
+	__u16	speed_hi;
+	__u8	eth_tp_mdix;
+	__u8	eth_tp_mdix_ctrl;
+	__u32	lp_advertising;
 	__u32	reserved[2];
 };
 
@@ -79,37 +139,68 @@ static inline __u32 ethtool_cmd_speed(const struct ethtool_cmd *ep)
 
 #define ETHTOOL_FWVERS_LEN	32
 #define ETHTOOL_BUSINFO_LEN	32
-/* these strings are set to whatever the driver author decides... */
+
+/**
+ * struct ethtool_drvinfo - general driver and device information
+ * @cmd: Command number = %ETHTOOL_GDRVINFO
+ * @driver: Driver short name.  This should normally match the name
+ *	in its bus driver structure (e.g. pci_driver::name).  Must
+ *	not be an empty string.
+ * @version: Driver version string; may be an empty string
+ * @fw_version: Firmware version string; may be an empty string
+ * @bus_info: Device bus address.  This should match the dev_name()
+ *	string for the underlying bus device, if there is one.  May be
+ *	an empty string.
+ * @n_priv_flags: Number of flags valid for %ETHTOOL_GPFLAGS and
+ *	%ETHTOOL_SPFLAGS commands; also the number of strings in the
+ *	%ETH_SS_PRIV_FLAGS set
+ * @n_stats: Number of u64 statistics returned by the %ETHTOOL_GSTATS
+ *	command; also the number of strings in the %ETH_SS_STATS set
+ * @testinfo_len: Number of results returned by the %ETHTOOL_TEST
+ *	command; also the number of strings in the %ETH_SS_TEST set
+ * @eedump_len: Size of EEPROM accessible through the %ETHTOOL_GEEPROM
+ *	and %ETHTOOL_SEEPROM commands, in bytes
+ * @regdump_len: Size of register dump returned by the %ETHTOOL_GREGS
+ *	command, in bytes
+ *
+ * Users can use the %ETHTOOL_GSSET_INFO command to get the number of
+ * strings in any string set (from Linux 2.6.34).
+ *
+ * Drivers should set at most @driver, @version, @fw_version and
+ * @bus_info in their get_drvinfo() implementation.  The ethtool
+ * core fills in the other fields using other driver operations.
+ */
 struct ethtool_drvinfo {
 	__u32	cmd;
-	char	driver[32];	/* driver short name, "tulip", "eepro100" */
-	char	version[32];	/* driver version string */
-	char	fw_version[ETHTOOL_FWVERS_LEN];	/* firmware version string */
-	char	bus_info[ETHTOOL_BUSINFO_LEN];	/* Bus info for this IF. */
-				/* For PCI devices, use pci_name(pci_dev). */
+	char	driver[32];
+	char	version[32];
+	char	fw_version[ETHTOOL_FWVERS_LEN];
+	char	bus_info[ETHTOOL_BUSINFO_LEN];
 	char	reserved1[32];
 	char	reserved2[12];
-				/*
-				 * Some struct members below are filled in
-				 * using ops->get_sset_count().  Obtaining
-				 * this info from ethtool_drvinfo is now
-				 * deprecated; Use ETHTOOL_GSSET_INFO
-				 * instead.
-				 */
-	__u32	n_priv_flags;	/* number of flags valid in ETHTOOL_GPFLAGS */
-	__u32	n_stats;	/* number of u64's from ETHTOOL_GSTATS */
+	__u32	n_priv_flags;
+	__u32	n_stats;
 	__u32	testinfo_len;
-	__u32	eedump_len;	/* Size of data from ETHTOOL_GEEPROM (bytes) */
-	__u32	regdump_len;	/* Size of data from ETHTOOL_GREGS (bytes) */
+	__u32	eedump_len;
+	__u32	regdump_len;
 };
 
 #define SOPASS_MAX	6
-/* wake-on-lan settings */
+
+/**
+ * struct ethtool_wolinfo - Wake-On-Lan configuration
+ * @cmd: Command number = %ETHTOOL_GWOL or %ETHTOOL_SWOL
+ * @supported: Bitmask of %WAKE_* flags for supported Wake-On-Lan modes.
+ *	Read-only.
+ * @wolopts: Bitmask of %WAKE_* flags for enabled Wake-On-Lan modes.
+ * @sopass: SecureOn(tm) password; meaningful only if %WAKE_MAGICSECURE
+ *	is set in @wolopts.
+ */
 struct ethtool_wolinfo {
 	__u32	cmd;
 	__u32	supported;
 	__u32	wolopts;
-	__u8	sopass[SOPASS_MAX]; /* SecureOn(tm) password */
+	__u8	sopass[SOPASS_MAX];
 };
 
 /* for passing single values */
@@ -118,20 +209,51 @@ struct ethtool_value {
 	__u32	data;
 };
 
-/* for passing big chunks of data */
+/**
+ * struct ethtool_regs - hardware register dump
+ * @cmd: Command number = %ETHTOOL_GREGS
+ * @version: Dump format version.  This is driver-specific and may
+ *	distinguish different chips/revisions.  Drivers must use new
+ *	version numbers whenever the dump format changes in an
+ *	incompatible way.
+ * @len: On entry, the real length of @data.  On return, the number of
+ *	bytes used.
+ * @data: Buffer for the register dump
+ *
+ * Users should use %ETHTOOL_GDRVINFO to find the maximum length of
+ * a register dump for the interface.  They must allocate the buffer
+ * immediately following this structure.
+ */
 struct ethtool_regs {
 	__u32	cmd;
-	__u32	version; /* driver-specific, indicates different chips/revs */
-	__u32	len; /* bytes */
+	__u32	version;
+	__u32	len;
 	__u8	data[0];
 };
 
-/* for passing EEPROM chunks */
+/**
+ * struct ethtool_eeprom - EEPROM dump
+ * @cmd: Command number = %ETHTOOL_GEEPROM, %ETHTOOL_GMODULEEEPROM or
+ *	%ETHTOOL_SEEPROM
+ * @magic: A 'magic cookie' value to guard against accidental changes.
+ *	The value passed in to %ETHTOOL_SEEPROM must match the value
+ *	returned by %ETHTOOL_GEEPROM for the same device.  This is
+ *	unused when @cmd is %ETHTOOL_GMODULEEEPROM.
+ * @offset: Offset within the EEPROM to begin reading/writing, in bytes
+ * @len: On entry, number of bytes to read/write.  On successful
+ *	return, number of bytes actually read/written.  In case of
+ *	error, this may indicate at what point the error occurred.
+ * @data: Buffer to read/write from
+ *
+ * Users may use %ETHTOOL_GDRVINFO or %ETHTOOL_GMODULEINFO to find
+ * the length of an on-board or module EEPROM, respectively.  They
+ * must allocate the buffer immediately following this structure.
+ */
 struct ethtool_eeprom {
 	__u32	cmd;
 	__u32	magic;
-	__u32	offset; /* in bytes */
-	__u32	len; /* in bytes */
+	__u32	offset;
+	__u32	len;
 	__u8	data[0];
 };
 
@@ -229,17 +351,18 @@ struct ethtool_modinfo {
  * @rate_sample_interval: How often to do adaptive coalescing packet rate
  *	sampling, measured in seconds.  Must not be zero.
  *
- * Each pair of (usecs, max_frames) fields specifies this exit
- * condition for interrupt coalescing:
+ * Each pair of (usecs, max_frames) fields specifies that interrupts
+ * should be coalesced until
  *	(usecs > 0 && time_since_first_completion >= usecs) ||
  *	(max_frames > 0 && completed_frames >= max_frames)
+ *
  * It is illegal to set both usecs and max_frames to zero as this
  * would cause interrupts to never be generated.  To disable
  * coalescing, set usecs = 0 and max_frames = 1.
  *
  * Some implementations ignore the value of max_frames and use the
- * condition:
- *	time_since_first_completion >= usecs
+ * condition time_since_first_completion >= usecs
+ *
  * This is deprecated.  Drivers for hardware that does not support
  * counting completions should validate that max_frames == !rx_usecs.
  *
@@ -279,22 +402,37 @@ struct ethtool_coalesce {
 	__u32	rate_sample_interval;
 };
 
-/* for configuring RX/TX ring parameters */
+/**
+ * struct ethtool_ringparam - RX/TX ring parameters
+ * @cmd: Command number = %ETHTOOL_GRINGPARAM or %ETHTOOL_SRINGPARAM
+ * @rx_max_pending: Maximum supported number of pending entries per
+ *	RX ring.  Read-only.
+ * @rx_mini_max_pending: Maximum supported number of pending entries
+ *	per RX mini ring.  Read-only.
+ * @rx_jumbo_max_pending: Maximum supported number of pending entries
+ *	per RX jumbo ring.  Read-only.
+ * @tx_max_pending: Maximum supported number of pending entries per
+ *	TX ring.  Read-only.
+ * @rx_pending: Current maximum number of pending entries per RX ring
+ * @rx_mini_pending: Current maximum number of pending entries per RX
+ *	mini ring
+ * @rx_jumbo_pending: Current maximum number of pending entries per RX
+ *	jumbo ring
+ * @tx_pending: Current maximum supported number of pending entries
+ *	per TX ring
+ *
+ * If the interface does not have separate RX mini and/or jumbo rings,
+ * @rx_mini_max_pending and/or @rx_jumbo_max_pending will be 0.
+ *
+ * There may also be driver-dependent minimum values for the number
+ * of entries per ring.
+ */
 struct ethtool_ringparam {
-	__u32	cmd;	/* ETHTOOL_{G,S}RINGPARAM */
-
-	/* Read only attributes.  These indicate the maximum number
-	 * of pending RX/TX ring entries the driver will allow the
-	 * user to set.
-	 */
+	__u32	cmd;
 	__u32	rx_max_pending;
 	__u32	rx_mini_max_pending;
 	__u32	rx_jumbo_max_pending;
 	__u32	tx_max_pending;
-
-	/* Values changeable by the user.  The valid values are
-	 * in the range 1 to the "*_max_pending" counterpart above.
-	 */
 	__u32	rx_pending;
 	__u32	rx_mini_pending;
 	__u32	rx_jumbo_pending;
@@ -329,51 +467,96 @@ struct ethtool_channels {
 	__u32	combined_count;
 };
 
-/* for configuring link flow control parameters */
+/**
+ * struct ethtool_pauseparam - Ethernet pause (flow control) parameters
+ * @cmd: Command number = %ETHTOOL_GPAUSEPARAM or %ETHTOOL_SPAUSEPARAM
+ * @autoneg: Flag to enable autonegotiation of pause frame use
+ * @rx_pause: Flag to enable reception of pause frames
+ * @tx_pause: Flag to enable transmission of pause frames
+ *
+ * Drivers should reject a non-zero setting of @autoneg when
+ * autoneogotiation is disabled (or not supported) for the link.
+ *
+ * If the link is autonegotiated, drivers should use
+ * mii_advertise_flowctrl() or similar code to set the advertised
+ * pause frame capabilities based on the @rx_pause and @tx_pause flags,
+ * even if @autoneg is zero.  They should also allow the advertised
+ * pause frame capabilities to be controlled directly through the
+ * advertising field of &struct ethtool_cmd.
+ *
+ * If @autoneg is non-zero, the MAC is configured to send and/or
+ * receive pause frames according to the result of autonegotiation.
+ * Otherwise, it is configured directly based on the @rx_pause and
+ * @tx_pause flags.
+ */
 struct ethtool_pauseparam {
-	__u32	cmd;	/* ETHTOOL_{G,S}PAUSEPARAM */
-
-	/* If the link is being auto-negotiated (via ethtool_cmd.autoneg
-	 * being true) the user may set 'autoneg' here non-zero to have the
-	 * pause parameters be auto-negotiated too.  In such a case, the
-	 * {rx,tx}_pause values below determine what capabilities are
-	 * advertised.
-	 *
-	 * If 'autoneg' is zero or the link is not being auto-negotiated,
-	 * then {rx,tx}_pause force the driver to use/not-use pause
-	 * flow control.
-	 */
+	__u32	cmd;
 	__u32	autoneg;
 	__u32	rx_pause;
 	__u32	tx_pause;
 };
 
 #define ETH_GSTRING_LEN		32
+
+/**
+ * enum ethtool_stringset - string set ID
+ * @ETH_SS_TEST: Self-test result names, for use with %ETHTOOL_TEST
+ * @ETH_SS_STATS: Statistic names, for use with %ETHTOOL_GSTATS
+ * @ETH_SS_PRIV_FLAGS: Driver private flag names, for use with
+ *	%ETHTOOL_GPFLAGS and %ETHTOOL_SPFLAGS
+ * @ETH_SS_NTUPLE_FILTERS: Previously used with %ETHTOOL_GRXNTUPLE;
+ *	now deprecated
+ * @ETH_SS_FEATURES: Device feature names
+ */
 enum ethtool_stringset {
 	ETH_SS_TEST		= 0,
 	ETH_SS_STATS,
 	ETH_SS_PRIV_FLAGS,
-	ETH_SS_NTUPLE_FILTERS,	/* Do not use, GRXNTUPLE is now deprecated */
+	ETH_SS_NTUPLE_FILTERS,
 	ETH_SS_FEATURES,
 };
 
-/* for passing string sets for data tagging */<