Merge tag 'v6.11-rc1' into for-6.12

Linux 6.11-rc1

42 files changed, 2286 insertions, 105 deletions

diff --git a/include/uapi/linux/btrfs_tree.h b/include/uapi/linux/btrfs_tree.h
index d24e8e121507..fc29d273845d 100644
--- a/include/uapi/linux/btrfs_tree.h
+++ b/include/uapi/linux/btrfs_tree.h
@@ -747,21 +747,9 @@ struct btrfs_raid_stride {
 	__le64 physical;
 } __attribute__ ((__packed__));
 
-/* The stripe_extent::encoding, 1:1 mapping of enum btrfs_raid_types. */
-#define BTRFS_STRIPE_RAID0	1
-#define BTRFS_STRIPE_RAID1	2
-#define BTRFS_STRIPE_DUP	3
-#define BTRFS_STRIPE_RAID10	4
-#define BTRFS_STRIPE_RAID5	5
-#define BTRFS_STRIPE_RAID6	6
-#define BTRFS_STRIPE_RAID1C3	7
-#define BTRFS_STRIPE_RAID1C4	8
-
 struct btrfs_stripe_extent {
-	__u8 encoding;
-	__u8 reserved[7];
 	/* An array of raid strides this stripe is composed of. */
-	struct btrfs_raid_stride strides[];
+	__DECLARE_FLEX_ARRAY(struct btrfs_raid_stride, strides);
 } __attribute__ ((__packed__));
 
 #define BTRFS_HEADER_FLAG_WRITTEN	(1ULL << 0)
@@ -777,6 +765,14 @@ struct btrfs_stripe_extent {
 #define BTRFS_SUPER_FLAG_CHANGING_FSID	(1ULL << 35)
 #define BTRFS_SUPER_FLAG_CHANGING_FSID_V2 (1ULL << 36)
 
+/*
+ * Those are temporaray flags utilized by btrfs-progs to do offline conversion.
+ * They are rejected by kernel.
+ * But still keep them all here to avoid conflicts.
+ */
+#define BTRFS_SUPER_FLAG_CHANGING_BG_TREE	(1ULL << 38)
+#define BTRFS_SUPER_FLAG_CHANGING_DATA_CSUM	(1ULL << 39)
+#define BTRFS_SUPER_FLAG_CHANGING_META_CSUM	(1ULL << 40)
 
 /*
  * items in the extent btree are used to record the objectid of the
diff --git a/include/uapi/linux/can/isotp.h b/include/uapi/linux/can/isotp.h
index 6cde62371b6f..bd990917f7c4 100644
--- a/include/uapi/linux/can/isotp.h
+++ b/include/uapi/linux/can/isotp.h
@@ -2,7 +2,7 @@
 /*
  * linux/can/isotp.h
  *
- * Definitions for isotp CAN sockets (ISO 15765-2:2016)
+ * Definitions for ISO 15765-2 CAN transport protocol sockets
  *
  * Copyright (c) 2020 Volkswagen Group Electronic Research
  * All rights reserved.
diff --git a/include/uapi/linux/dlm.h b/include/uapi/linux/dlm.h
index e7e905fb0bb2..4eaf835780b0 100644
--- a/include/uapi/linux/dlm.h
+++ b/include/uapi/linux/dlm.h
@@ -71,6 +71,8 @@ struct dlm_lksb {
 /* DLM_LSFL_TIMEWARN is deprecated and reserved. DO NOT USE! */
 #define DLM_LSFL_TIMEWARN	0x00000002
 #define DLM_LSFL_NEWEXCL     	0x00000008
+/* currently reserved due in-kernel use */
+#define __DLM_LSFL_RESERVED0	0x00000010
 
 
 #endif /* _UAPI__DLM_DOT_H__ */
diff --git a/include/uapi/linux/dma-heap.h b/include/uapi/linux/dma-heap.h
index 6f84fa08e074..a4cf716a49fa 100644
--- a/include/uapi/linux/dma-heap.h
+++ b/include/uapi/linux/dma-heap.h
@@ -19,7 +19,7 @@
 #define DMA_HEAP_VALID_FD_FLAGS (O_CLOEXEC | O_ACCMODE)
 
 /* Currently no heap flags */
-#define DMA_HEAP_VALID_HEAP_FLAGS (0)
+#define DMA_HEAP_VALID_HEAP_FLAGS (0ULL)
 
 /**
  * struct dma_heap_allocation_data - metadata passed from userspace for
diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h
index 8733a3117902..4a0a6e703483 100644
--- a/include/uapi/linux/ethtool.h
+++ b/include/uapi/linux/ethtool.h
@@ -753,6 +753,197 @@ enum ethtool_module_power_mode {
 };
 
 /**
+ * enum ethtool_c33_pse_ext_state - groups of PSE extended states
+ *      functions. IEEE 802.3-2022 33.2.4.4 Variables
+ *
+ * @ETHTOOL_C33_PSE_EXT_STATE_ERROR_CONDITION: Group of error_condition states
+ * @ETHTOOL_C33_PSE_EXT_STATE_MR_MPS_VALID: Group of mr_mps_valid states
+ * @ETHTOOL_C33_PSE_EXT_STATE_MR_PSE_ENABLE: Group of mr_pse_enable states
+ * @ETHTOOL_C33_PSE_EXT_STATE_OPTION_DETECT_TED: Group of option_detect_ted
+ *	states
+ * @ETHTOOL_C33_PSE_EXT_STATE_OPTION_VPORT_LIM: Group of option_vport_lim states
+ * @ETHTOOL_C33_PSE_EXT_STATE_OVLD_DETECTED: Group of ovld_detected states
+ * @ETHTOOL_C33_PSE_EXT_STATE_PD_DLL_POWER_TYPE: Group of pd_dll_power_type
+ *	states
+ * @ETHTOOL_C33_PSE_EXT_STATE_POWER_NOT_AVAILABLE: Group of power_not_available
+ *	states
+ * @ETHTOOL_C33_PSE_EXT_STATE_SHORT_DETECTED: Group of short_detected states
+ */
+enum ethtool_c33_pse_ext_state {
+	ETHTOOL_C33_PSE_EXT_STATE_ERROR_CONDITION = 1,
+	ETHTOOL_C33_PSE_EXT_STATE_MR_MPS_VALID,
+	ETHTOOL_C33_PSE_EXT_STATE_MR_PSE_ENABLE,
+	ETHTOOL_C33_PSE_EXT_STATE_OPTION_DETECT_TED,
+	ETHTOOL_C33_PSE_EXT_STATE_OPTION_VPORT_LIM,
+	ETHTOOL_C33_PSE_EXT_STATE_OVLD_DETECTED,
+	ETHTOOL_C33_PSE_EXT_STATE_PD_DLL_POWER_TYPE,
+	ETHTOOL_C33_PSE_EXT_STATE_POWER_NOT_AVAILABLE,
+	ETHTOOL_C33_PSE_EXT_STATE_SHORT_DETECTED,
+};
+
+/**
+ * enum ethtool_c33_pse_ext_substate_mr_mps_valid - mr_mps_valid states
+ *      functions. IEEE 802.3-2022 33.2.4.4 Variables
+ *
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_MPS_VALID_DETECTED_UNDERLOAD: Underload
+ *	state
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_MPS_VALID_CONNECTION_OPEN: Port is not
+ *	connected
+ *
+ * The PSE monitors either the DC or AC Maintain Power Signature
+ * (MPS, see 33.2.9.1). This variable indicates the presence or absence of
+ * a valid MPS.
+ */
+enum ethtool_c33_pse_ext_substate_mr_mps_valid {
+	ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_MPS_VALID_DETECTED_UNDERLOAD = 1,
+	ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_MPS_VALID_CONNECTION_OPEN,
+};
+
+/**
+ * enum ethtool_c33_pse_ext_substate_error_condition - error_condition states
+ *      functions. IEEE 802.3-2022 33.2.4.4 Variables
+ *
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_NON_EXISTING_PORT: Non-existing
+ *	port number
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_UNDEFINED_PORT: Undefined port
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_INTERNAL_HW_FAULT: Internal
+ *	hardware fault
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_COMM_ERROR_AFTER_FORCE_ON:
+ *	Communication error after force on
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_UNKNOWN_PORT_STATUS: Unknown
+ *	port status
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_HOST_CRASH_TURN_OFF: Host
+ *	crash turn off
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_HOST_CRASH_FORCE_SHUTDOWN:
+ *	Host crash force shutdown
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_CONFIG_CHANGE: Configuration
+ *	change
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_DETECTED_OVER_TEMP: Over
+ *	temperature detected
+ *
+ * error_condition is a variable indicating the status of
+ * implementation-specific fault conditions or optionally other system faults
+ * that prevent the PSE from meeting the specifications in Table 33–11 and that
+ * require the PSE not to source power. These error conditions are different
+ * from those monitored by the state diagrams in Figure 33–10.
+ */
+enum ethtool_c33_pse_ext_substate_error_condition {
+	ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_NON_EXISTING_PORT = 1,
+	ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_UNDEFINED_PORT,
+	ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_INTERNAL_HW_FAULT,
+	ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_COMM_ERROR_AFTER_FORCE_ON,
+	ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_UNKNOWN_PORT_STATUS,
+	ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_HOST_CRASH_TURN_OFF,
+	ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_HOST_CRASH_FORCE_SHUTDOWN,
+	ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_CONFIG_CHANGE,
+	ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_DETECTED_OVER_TEMP,
+};
+
+/**
+ * enum ethtool_c33_pse_ext_substate_mr_pse_enable - mr_pse_enable states
+ *      functions. IEEE 802.3-2022 33.2.4.4 Variables
+ *
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_PSE_ENABLE_DISABLE_PIN_ACTIVE: Disable
+ *	pin active
+ *
+ * mr_pse_enable is control variable that selects PSE operation and test
+ * functions.
+ */
+enum ethtool_c33_pse_ext_substate_mr_pse_enable {
+	ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_PSE_ENABLE_DISABLE_PIN_ACTIVE = 1,
+};
+
+/**
+ * enum ethtool_c33_pse_ext_substate_option_detect_ted - option_detect_ted
+ *	states functions. IEEE 802.3-2022 33.2.4.4 Variables
+ *
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_DETECT_TED_DET_IN_PROCESS: Detection
+ *	in process
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_DETECT_TED_CONNECTION_CHECK_ERROR:
+ *	Connection check error
+ *
+ * option_detect_ted is a variable indicating if detection can be performed
+ * by the PSE during the ted_timer interval.
+ */
+enum ethtool_c33_pse_ext_substate_option_detect_ted {
+	ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_DETECT_TED_DET_IN_PROCESS = 1,
+	ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_DETECT_TED_CONNECTION_CHECK_ERROR,
+};
+
+/**
+ * enum ethtool_c33_pse_ext_substate_option_vport_lim - option_vport_lim states
+ *      functions. IEEE 802.3-2022 33.2.4.4 Variables
+ *
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_HIGH_VOLTAGE: Main supply
+ *	voltage is high
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_LOW_VOLTAGE: Main supply
+ *	voltage is low
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_VOLTAGE_INJECTION: Voltage
+ *	injection into the port
+ *
+ * option_vport_lim is an optional variable indicates if VPSE is out of the
+ * operating range during normal operating state.
+ */
+enum ethtool_c33_pse_ext_substate_option_vport_lim {
+	ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_HIGH_VOLTAGE = 1,
+	ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_LOW_VOLTAGE,
+	ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_VOLTAGE_INJECTION,
+};
+
+/**
+ * enum ethtool_c33_pse_ext_substate_ovld_detected - ovld_detected states
+ *      functions. IEEE 802.3-2022 33.2.4.4 Variables
+ *
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OVLD_DETECTED_OVERLOAD: Overload state
+ *
+ * ovld_detected is a variable indicating if the PSE output current has been
+ * in an overload condition (see 33.2.7.6) for at least TCUT of a one-second
+ * sliding time.
+ */
+enum ethtool_c33_pse_ext_substate_ovld_detected {
+	ETHTOOL_C33_PSE_EXT_SUBSTATE_OVLD_DETECTED_OVERLOAD = 1,
+};
+
+/**
+ * enum ethtool_c33_pse_ext_substate_power_not_available - power_not_available
+ *	states functions. IEEE 802.3-2022 33.2.4.4 Variables
+ *
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_BUDGET_EXCEEDED: Power
+ *	budget exceeded for the controller
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_PORT_PW_LIMIT_EXCEEDS_CONTROLLER_BUDGET:
+ *	Configured port power limit exceeded controller power budget
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_PD_REQUEST_EXCEEDS_PORT_LIMIT:
+ *	Power request from PD exceeds port limit
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_HW_PW_LIMIT: Power
+ *	denied due to Hardware power limit
+ *
+ * power_not_available is a variable that is asserted in an
+ * implementation-dependent manner when the PSE is no longer capable of
+ * sourcing sufficient power to support the attached PD. Sufficient power
+ * is defined by classification; see 33.2.6.
+ */
+enum ethtool_c33_pse_ext_substate_power_not_available {
+	ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_BUDGET_EXCEEDED =  1,
+	ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_PORT_PW_LIMIT_EXCEEDS_CONTROLLER_BUDGET,
+	ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_PD_REQUEST_EXCEEDS_PORT_LIMIT,
+	ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_HW_PW_LIMIT,
+};
+
+/**
+ * enum ethtool_c33_pse_ext_substate_short_detected - short_detected states
+ *      functions. IEEE 802.3-2022 33.2.4.4 Variables
+ *
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_SHORT_DETECTED_SHORT_CONDITION: Short
+ *	condition was detected
+ *
+ * short_detected is a variable indicating if the PSE output current has been
+ * in a short circuit condition for TLIM within a sliding window (see 33.2.7.7).
+ */
+enum ethtool_c33_pse_ext_substate_short_detected {
+	ETHTOOL_C33_PSE_EXT_SUBSTATE_SHORT_DETECTED_SHORT_CONDITION = 1,
+};
+
+/**
  * enum ethtool_pse_types - Types of PSE controller.
  * @ETHTOOL_PSE_UNKNOWN: Type of PSE controller is unknown
  * @ETHTOOL_PSE_PODL: PSE controller which support PoDL
@@ -878,6 +1069,24 @@ enum ethtool_mm_verify_status {
 };
 
 /**
+ * enum ethtool_module_fw_flash_status - plug-in module firmware flashing status
+ * @ETHTOOL_MODULE_FW_FLASH_STATUS_STARTED: The firmware flashing process has
+ *	started.
+ * @ETHTOOL_MODULE_FW_FLASH_STATUS_IN_PROGRESS: The firmware flashing process
+ *	is in progress.
+ * @ETHTOOL_MODULE_FW_FLASH_STATUS_COMPLETED: The firmware flashing process was
+ *	completed successfully.
+ * @ETHTOOL_MODULE_FW_FLASH_STATUS_ERROR: The firmware flashing process was
+ *	stopped due to an error.
+ */
+enum ethtool_module_fw_flash_status {
+	ETHTOOL_MODULE_FW_FLASH_STATUS_STARTED = 1,
+	ETHTOOL_MODULE_FW_FLASH_STATUS_IN_PROGRESS,
+	ETHTOOL_MODULE_FW_FLASH_STATUS_COMPLETED,
+	ETHTOOL_MODULE_FW_FLASH_STATUS_ERROR,
+};
+
+/**
  * struct ethtool_gstrings - string set for data tagging
  * @cmd: Command number = %ETHTOOL_GSTRINGS
  * @string_set: String set ID; one of &enum ethtool_stringset
@@ -1845,6 +2054,7 @@ enum ethtool_link_mode_bit_indices {
 	ETHTOOL_LINK_MODE_10baseT1S_Full_BIT		 = 99,
 	ETHTOOL_LINK_MODE_10baseT1S_Half_BIT		 = 100,
 	ETHTOOL_LINK_MODE_10baseT1S_P2MP_Half_BIT	 = 101,
+	ETHTOOL_LINK_MODE_10baseT1BRR_Full_BIT		 = 102,
 
 	/* must be last entry */
 	__ETHTOOL_LINK_MODE_MASK_NBITS
diff --git a/include/uapi/linux/ethtool_netlink.h b/include/uapi/linux/ethtool_netlink.h
index b49b804b9495..6d5bdcc67631 100644
--- a/include/uapi/linux/ethtool_netlink.h
+++ b/include/uapi/linux/ethtool_netlink.h
@@ -57,6 +57,7 @@ enum {
 	ETHTOOL_MSG_PLCA_GET_STATUS,
 	ETHTOOL_MSG_MM_GET,
 	ETHTOOL_MSG_MM_SET,
+	ETHTOOL_MSG_MODULE_FW_FLASH_ACT,
 
 	/* add new constants above here */
 	__ETHTOOL_MSG_USER_CNT,
@@ -109,6 +110,7 @@ enum {
 	ETHTOOL_MSG_PLCA_NTF,
 	ETHTOOL_MSG_MM_GET_REPLY,
 	ETHTOOL_MSG_MM_NTF,
+	ETHTOOL_MSG_MODULE_FW_FLASH_NTF,
 
 	/* add new constants above here */
 	__ETHTOOL_MSG_KERNEL_CNT,
@@ -415,12 +417,34 @@ enum {
 	ETHTOOL_A_COALESCE_TX_AGGR_MAX_BYTES,		/* u32 */
 	ETHTOOL_A_COALESCE_TX_AGGR_MAX_FRAMES,		/* u32 */
 	ETHTOOL_A_COALESCE_TX_AGGR_TIME_USECS,		/* u32 */
+	/* nest - _A_PROFILE_IRQ_MODERATION */
+	ETHTOOL_A_COALESCE_RX_PROFILE,
+	/* nest - _A_PROFILE_IRQ_MODERATION */
+	ETHTOOL_A_COALESCE_TX_PROFILE,
 
 	/* add new constants above here */
 	__ETHTOOL_A_COALESCE_CNT,
 	ETHTOOL_A_COALESCE_MAX = (__ETHTOOL_A_COALESCE_CNT - 1)
 };
 
+enum {
+	ETHTOOL_A_PROFILE_UNSPEC,
+	/* nest, _A_IRQ_MODERATION_* */
+	ETHTOOL_A_PROFILE_IRQ_MODERATION,
+	__ETHTOOL_A_PROFILE_CNT,
+	ETHTOOL_A_PROFILE_MAX = (__ETHTOOL_A_PROFILE_CNT - 1)
+};
+
+enum {
+	ETHTOOL_A_IRQ_MODERATION_UNSPEC,
+	ETHTOOL_A_IRQ_MODERATION_USEC,			/* u32 */
+	ETHTOOL_A_IRQ_MODERATION_PKTS,			/* u32 */
+	ETHTOOL_A_IRQ_MODERATION_COMPS,			/* u32 */
+
+	__ETHTOOL_A_IRQ_MODERATION_CNT,
+	ETHTOOL_A_IRQ_MODERATION_MAX = (__ETHTOOL_A_IRQ_MODERATION_CNT - 1)
+};
+
 /* PAUSE */
 
 enum {
@@ -907,6 +931,12 @@ enum {
 
 /* Power Sourcing Equipment */
 enum {
+	ETHTOOL_A_C33_PSE_PW_LIMIT_UNSPEC,
+	ETHTOOL_A_C33_PSE_PW_LIMIT_MIN,	/* u32 */
+	ETHTOOL_A_C33_PSE_PW_LIMIT_MAX,	/* u32 */
+};
+
+enum {
 	ETHTOOL_A_PSE_UNSPEC,
 	ETHTOOL_A_PSE_HEADER,			/* nest - _A_HEADER_* */
 	ETHTOOL_A_PODL_PSE_ADMIN_STATE,		/* u32 */
@@ -915,6 +945,12 @@ enum {
 	ETHTOOL_A_C33_PSE_ADMIN_STATE,		/* u32 */
 	ETHTOOL_A_C33_PSE_ADMIN_CONTROL,	/* u32 */
 	ETHTOOL_A_C33_PSE_PW_D_STATUS,		/* u32 */
+	ETHTOOL_A_C33_PSE_PW_CLASS,		/* u32 */
+	ETHTOOL_A_C33_PSE_ACTUAL_PW,		/* u32 */
+	ETHTOOL_A_C33_PSE_EXT_STATE,		/* u32 */
+	ETHTOOL_A_C33_PSE_EXT_SUBSTATE,		/* u32 */
+	ETHTOOL_A_C33_PSE_AVAIL_PW_LIMIT,	/* u32 */
+	ETHTOOL_A_C33_PSE_PW_LIMIT_RANGES,	/* nest - _C33_PSE_PW_LIMIT_* */
 
 	/* add new constants above here */
 	__ETHTOOL_A_PSE_CNT,
@@ -996,6 +1032,23 @@ enum {
 	ETHTOOL_A_MM_MAX = (__ETHTOOL_A_MM_CNT - 1)
 };
 
+/* MODULE_FW_FLASH */
+
+enum {
+	ETHTOOL_A_MODULE_FW_FLASH_UNSPEC,
+	ETHTOOL_A_MODULE_FW_FLASH_HEADER,		/* nest - _A_HEADER_* */
+	ETHTOOL_A_MODULE_FW_FLASH_FILE_NAME,		/* string */
+	ETHTOOL_A_MODULE_FW_FLASH_PASSWORD,		/* u32 */
+	ETHTOOL_A_MODULE_FW_FLASH_STATUS,		/* u32 */
+	ETHTOOL_A_MODULE_FW_FLASH_STATUS_MSG,		/* string */
+	ETHTOOL_A_MODULE_FW_FLASH_DONE,			/* uint */
+	ETHTOOL_A_MODULE_FW_FLASH_TOTAL,		/* uint */
+
+	/* add new constants above here */
+	__ETHTOOL_A_MODULE_FW_FLASH_CNT,
+	ETHTOOL_A_MODULE_FW_FLASH_MAX = (__ETHTOOL_A_MODULE_FW_FLASH_CNT - 1)
+};
+
 /* generic netlink info */
 #define ETHTOOL_GENL_NAME "ethtool"
 #define ETHTOOL_GENL_VERSION 1
diff --git a/include/uapi/linux/fs.h b/include/uapi/linux/fs.h
index 45e4e64fd664..753971770733 100644
--- a/include/uapi/linux/fs.h
+++ b/include/uapi/linux/fs.h
@@ -329,12 +329,17 @@ typedef int __bitwise __kernel_rwf_t;
 /* per-IO negation of O_APPEND */
 #define RWF_NOAPPEND	((__force __kernel_rwf_t)0x00000020)
 
+/* Atomic Write */
+#define RWF_ATOMIC	((__force __kernel_rwf_t)0x00000040)
+
 /* mask of flags supported by the kernel */
 #define RWF_SUPPORTED	(RWF_HIPRI | RWF_DSYNC | RWF_SYNC | RWF_NOWAIT |\
-			 RWF_APPEND | RWF_NOAPPEND)
+			 RWF_APPEND | RWF_NOAPPEND | RWF_ATOMIC)
+
+#define PROCFS_IOCTL_MAGIC 'f'
 
 /* Pagemap ioctl */
-#define PAGEMAP_SCAN	_IOWR('f', 16, struct pm_scan_arg)
+#define PAGEMAP_SCAN	_IOWR(PROCFS_IOCTL_MAGIC, 16, struct pm_scan_arg)
 
 /* Bitmasks provided in pm_scan_args masks and reported in page_region.categories. */
 #define PAGE_IS_WPALLOWED	(1 << 0)
@@ -393,4 +398,158 @@ struct pm_scan_arg {
 	__u64 return_mask;
 };
 
+/* /proc/<pid>/maps ioctl */
+#define PROCMAP_QUERY	_IOWR(PROCFS_IOCTL_MAGIC, 17, struct procmap_query)
+
+enum procmap_query_flags {
+	/*
+	 * VMA permission flags.
+	 *
+	 * Can be used as part of procmap_query.query_flags field to look up
+	 * only VMAs satisfying specified subset of permissions. E.g., specifying
+	 * PROCMAP_QUERY_VMA_READABLE only will return both readable and read/write VMAs,
+	 * while having PROCMAP_QUERY_VMA_READABLE | PROCMAP_QUERY_VMA_WRITABLE will only
+	 * return read/write VMAs, though both executable/non-executable and
+	 * private/shared will be ignored.
+	 *
+	 * PROCMAP_QUERY_VMA_* flags are also returned in procmap_query.vma_flags
+	 * field to specify actual VMA permissions.
+	 */
+	PROCMAP_QUERY_VMA_READABLE		= 0x01,
+	PROCMAP_QUERY_VMA_WRITABLE		= 0x02,
+	PROCMAP_QUERY_VMA_EXECUTABLE		= 0x04,
+	PROCMAP_QUERY_VMA_SHARED		= 0x08,
+	/*
+	 * Query modifier flags.
+	 *
+	 * By default VMA that covers provided address is returned, or -ENOENT
+	 * is returned. With PROCMAP_QUERY_COVERING_OR_NEXT_VMA flag set, closest
+	 * VMA with vma_start > addr will be returned if no covering VMA is
+	 * found.
+	 *
+	 * PROCMAP_QUERY_FILE_BACKED_VMA instructs query to consider only VMAs that
+	 * have file backing. Can be combined with PROCMAP_QUERY_COVERING_OR_NEXT_VMA
+	 * to iterate all VMAs with file backing.
+	 */
+	PROCMAP_QUERY_COVERING_OR_NEXT_VMA	= 0x10,
+	PROCMAP_QUERY_FILE_BACKED_VMA		= 0x20,
+};
+
+/*
+ * Input/output argument structured passed into ioctl() call. It can be used
+ * to query a set of VMAs (Virtual Memory Areas) of a process.
+ *
+ * Each field can be one of three kinds, marked in a short comment to the
+ * right of the field:
+ *   - "in", input argument, user has to provide this value, kernel doesn't modify it;
+ *   - "out", output argument, kernel sets this field with VMA data;
+ *   - "in/out", input and output argument; user provides initial value (used
+ *     to specify maximum allowable buffer size), and kernel sets it to actual
+ *     amount of data written (or zero, if there is no data).
+ *
+ * If matching VMA is found (according to criterias specified by
+ * query_addr/query_flags, all the out fields are filled out, and ioctl()
+ * returns 0. If there is no matching VMA, -ENOENT will be returned.
+ * In case of any other error, negative error code other than -ENOENT is
+ * returned.
+ *
+ * Most of the data is similar to the one returned as text in /proc/<pid>/maps
+ * file, but procmap_query provides more querying flexibility. There are no
+ * consistency guarantees between subsequent ioctl() calls, but data returned
+ * for matched VMA is self-consistent.
+ */
+struct procmap_query {
+	/* Query struct size, for backwards/forward compatibility */
+	__u64 size;
+	/*
+	 * Query flags, a combination of enum procmap_query_flags values.
+	 * Defines query filtering and behavior, see enum procmap_query_flags.
+	 *
+	 * Input argument, provided by user. Kernel doesn't modify it.
+	 */
+	__u64 query_flags;		/* in */
+	/*
+	 * Query address. By default, VMA that covers this address will
+	 * be looked up. PROCMAP_QUERY_* flags above modify this default
+	 * behavior further.
+	 *
+	 * Input argument, provided by user. Kernel doesn't modify it.
+	 */
+	__u64 query_addr;		/* in */
+	/* VMA starting (inclusive) and ending (exclusive) address, if VMA is found. */
+	__u64 vma_start;		/* out */
+	__u64 vma_end;			/* out */
+	/* VMA permissions flags. A combination of PROCMAP_QUERY_VMA_* flags. */
+	__u64 vma_flags;		/* out */
+	/* VMA backing page size granularity. */
+	__u64 vma_page_size;		/* out */
+	/*
+	 * VMA file offset. If VMA has file backing, this specifies offset
+	 * within the file that VMA's start address corresponds to.
+	 * Is set to zero if VMA has no backing file.
+	 */
+	__u64 vma_offset;		/* out */
+	/* Backing file's inode number, or zero, if VMA has no backing file. */
+	__u64 inode;			/* out */
+	/* Backing file's device major/minor number, or zero, if VMA has no backing file. */
+	__u32 dev_major;		/* out */
+	__u32 dev_minor;		/* out */
+	/*
+	 * If set to non-zero value, signals the request to return VMA name
+	 * (i.e., VMA's backing file's absolute path, with " (deleted)" suffix
+	 * appended, if file was unlinked from FS) for matched VMA. VMA name
+	 * can also be some special name (e.g., "[heap]", "[stack]") or could
+	 * be even user-supplied with prctl(PR_SET_VMA, PR_SET_VMA_ANON_NAME).
+	 *
+	 * Kernel will set this field to zero, if VMA has no associated name.
+	 * Otherwise kernel will return actual amount of bytes filled in
+	 * user-supplied buffer (see vma_name_addr field below), including the
+	 * terminating zero.
+	 *
+	 * If VMA name is longer that user-supplied maximum buffer size,
+	 * -E2BIG error is returned.
+	 *
+	 * If this field is set to non-zero value, vma_name_addr should point
+	 * to valid user space memory buffer of at least vma_name_size bytes.
+	 * If set to zero, vma_name_addr should be set to zero as well
+	 */
+	__u32 vma_name_size;		/* in/out */
+	/*
+	 * If set to non-zero value, signals the request to extract and return
+	 * VMA's backing file's build ID, if the backing file is an ELF file
+	 * and it contains embedded build ID.
+	 *
+	 * Kernel will set this field to zero, if VMA has no backing file,
+	 * backing file is not an ELF file, or ELF file has no build ID
+	 * embedded.
+	 *
+	 * Build ID is a binary value (not a string). Kernel will set
+	 * build_id_size field to exact number of bytes used for build ID.
+	 * If build ID is requested and present, but needs more bytes than
+	 * user-supplied maximum buffer size (see build_id_addr field below),
+	 * -E2BIG error will be returned.
+	 *
+	 * If this field is set to non-zero value, build_id_addr should point
+	 * to valid user space memory buffer of at least build_id_size bytes.
+	 * If set to zero, build_id_addr should be set to zero as well
+	 */
+	__u32 build_id_size;		/* in/out */
+	/*
+	 * User-supplied address of a buffer of at least vma_name_size bytes
+	 * for kernel to fill with matched VMA's name (see vma_name_size field
+	 * description above for details).
+	 *
+	 * Should be set to zero if VMA name should not be returned.
+	 */
+	__u64 vma_name_addr;		/* in */
+	/*
+	 * User-supplied address of a buffer of at least build_id_size bytes
+	 * for kernel to fill with matched VMA's ELF build ID, if available
+	 * (see build_id_size field description above for details).
+	 *
+	 * Should be set to zero if build ID should not be returned.
+	 */
+	__u64 build_id_addr;		/* in */
+};
+
 #endif /* _UAPI_LINUX_FS_H */
diff --git a/include/uapi/linux/if_xdp.h b/include/uapi/linux/if_xdp.h
index d31698410410..42ec5ddaab8d 100644
--- a/include/uapi/linux/if_xdp.h
+++ b/include/uapi/linux/if_xdp.h
@@ -41,6 +41,10 @@
  */
 #define XDP_UMEM_TX_SW_CSUM		(1 << 1)
 
+/* Request to reserve tx_metadata_len bytes of per-chunk metadata.
+ */
+#define XDP_UMEM_TX_METADATA_LEN	(1 << 2)
+
 struct sockaddr_xdp {
 	__u16 sxdp_family;
 	__u16 sxdp_flags;
diff --git a/include/uapi/linux/iio/buffer.h b/include/uapi/linux/iio/buffer.h
index 13939032