Merge tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
 "The most interesting thing is probably the networking structs
  reorganization and a significant amount of changes is around
  self-tests.

  Core & protocols:

   - Analyze and reorganize core networking structs (socks, netdev,
     netns, mibs) to optimize cacheline consumption and set up build
     time warnings to safeguard against future header changes

     This improves TCP performances with many concurrent connections up
     to 40%

   - Add page-pool netlink-based introspection, exposing the memory
     usage and recycling stats. This helps indentify bad PP users and
     possible leaks

   - Refine TCP/DCCP source port selection to no longer favor even
     source port at connect() time when IP_LOCAL_PORT_RANGE is set. This
     lowers the time taken by connect() for hosts having many active
     connections to the same destination

   - Refactor the TCP bind conflict code, shrinking related socket
     structs

   - Refactor TCP SYN-Cookie handling, as a preparation step to allow
     arbitrary SYN-Cookie processing via eBPF

   - Tune optmem_max for 0-copy usage, increasing the default value to
     128KB and namespecifying it

   - Allow coalescing for cloned skbs coming from page pools, improving
     RX performances with some common configurations

   - Reduce extension header parsing overhead at GRO time

   - Add bridge MDB bulk deletion support, allowing user-space to
     request the deletion of matching entries

   - Reorder nftables struct members, to keep data accessed by the
     datapath first

   - Introduce TC block ports tracking and use. This allows supporting
     multicast-like behavior at the TC layer

   - Remove UAPI support for retired TC qdiscs (dsmark, CBQ and ATM) and
     classifiers (RSVP and tcindex)

   - More data-race annotations

   - Extend the diag interface to dump TCP bound-only sockets

   - Conditional notification of events for TC qdisc class and actions

   - Support for WPAN dynamic associations with nearby devices, to form
     a sub-network using a specific PAN ID

   - Implement SMCv2.1 virtual ISM device support

   - Add support for Batman-avd mulicast packet type

  BPF:

   - Tons of verifier improvements:
       - BPF register bounds logic and range support along with a large
         test suite
       - log improvements
       - complete precision tracking support for register spills
       - track aligned STACK_ZERO cases as imprecise spilled registers.
         This improves the verifier "instructions processed" metric from
         single digit to 50-60% for some programs
       - support for user's global BPF subprogram arguments with few
         commonly requested annotations for a better developer
         experience
       - support tracking of BPF_JNE which helps cases when the compiler
         transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the
         like
       - several fixes

   - Add initial TX metadata implementation for AF_XDP with support in
     mlx5 and stmmac drivers. Two types of offloads are supported right
     now, that is, TX timestamp and TX checksum offload

   - Fix kCFI bugs in BPF all forms of indirect calls from BPF into
     kernel and from kernel into BPF work with CFI enabled. This allows
     BPF to work with CONFIG_FINEIBT=y

   - Change BPF verifier logic to validate global subprograms lazily
     instead of unconditionally before the main program, so they can be
     guarded using BPF CO-RE techniques

   - Support uid/gid options when mounting bpffs

   - Add a new kfunc which acquires the associated cgroup of a task
     within a specific cgroup v1 hierarchy where the latter is
     identified by its id

   - Extend verifier to allow bpf_refcount_acquire() of a map value
     field obtained via direct load which is a use-case needed in
     sched_ext

   - Add BPF link_info support for uprobe multi link along with bpftool
     integration for the latter

   - Support for VLAN tag in XDP hints

   - Remove deprecated bpfilter kernel leftovers given the project is
     developed in user-space (https://github.com/facebook/bpfilter)

  Misc:

   - Support for parellel TC self-tests execution

   - Increase MPTCP self-tests coverage

   - Updated the bridge documentation, including several so-far
     undocumented features

   - Convert all the net self-tests to run in unique netns, to avoid
     random failures due to conflict and allow concurrent runs

   - Add TCP-AO self-tests

   - Add kunit tests for both cfg80211 and mac80211

   - Autogenerate Netlink families documentation from YAML spec

   - Add yml-gen support for fixed headers and recursive nests, the tool
     can now generate user-space code for all genetlink families for
     which we have specs

   - A bunch of additional module descriptions fixes

   - Catch incorrect freeing of pages belonging to a page pool

  Driver API:

   - Rust abstractions for network PHY drivers; do not cover yet the
     full C API, but already allow implementing functional PHY drivers
     in rust

   - Introduce queue and NAPI support in the netdev Netlink interface,
     allowing complete access to the device <> NAPIs <> queues
     relationship

   - Introduce notifications filtering for devlink to allow control
     application scale to thousands of instances

   - Improve PHY validation, requesting rate matching information for
     each ethtool link mode supported by both the PHY and host

   - Add support for ethtool symmetric-xor RSS hash

   - ACPI based Wifi band RFI (WBRF) mitigation feature for the AMD
     platform

   - Expose pin fractional frequency offset value over new DPLL generic
     netlink attribute

   - Convert older drivers to platform remove callback returning void

   - Add support for PHY package MMD read/write

  New hardware / drivers:

   - Ethernet:
       - Octeon CN10K devices
       - Broadcom 5760X P7
       - Qualcomm SM8550 SoC
       - Texas Instrument DP83TG720S PHY

   - Bluetooth:
       - IMC Networks Bluetooth radio

  Removed:

   - WiFi:
       - libertas 16-bit PCMCIA support
       - Atmel at76c50x drivers
       - HostAP ISA/PCMCIA style 802.11b driver
       - zd1201 802.11b USB dongles
       - Orinoco ISA/PCMCIA 802.11b driver
       - Aviator/Raytheon driver
       - Planet WL3501 driver
       - RNDIS USB 802.11b driver

  Driver updates:

   - Ethernet high-speed NICs:
       - Intel (100G, ice, idpf):
          - allow one by one port representors creation and removal
          - add temperature and clock information reporting
          - add get/set for ethtool's header split ringparam
          - add again FW logging
          - adds support switchdev hardware packet mirroring
          - iavf: implement symmetric-xor RSS hash
          - igc: add support for concurrent physical and free-running
            timers
          - i40e: increase the allowable descriptors
       - nVidia/Mellanox:
          - Preparation for Socket-Direct multi-dev netdev. That will
            allow in future releases combining multiple PFs devices
            attached to different NUMA nodes under the same netdev
       - Broadcom (bnxt):
          - TX completion handling improvements
          - add basic ntuple filter support
          - reduce MSIX vectors usage for MQPRIO offload
          - add VXLAN support, USO offload and TX coalesce completion
            for P7
       - Marvell Octeon EP:
          - xmit-more support
          - add PF-VF mailbox support and use it for FW notifications
            for VFs
       - Wangxun (ngbe/txgbe):
          - implement ethtool functions to operate pause param, ring
            param, coalesce channel number and msglevel
       - Netronome/Corigine (nfp):
          - add flow-steering support
          - support UDP segmentation offload

   - Ethernet NICs embedded, slower, virtual:
       - Xilinx AXI: remove duplicate DMA code adopting the dma engine
         driver
       - stmmac: add support for HW-accelerated VLAN stripping
       - TI AM654x sw: add mqprio, frame preemption & coalescing
       - gve: add support for non-4k page sizes.
       - virtio-net: support dynamic coalescing moderation

   - nVidia/Mellanox Ethernet datacenter switches:
       - allow firmware upgrade without a reboot
       - more flexible support for bridge flooding via the compressed
         FID flooding mode

   - Ethernet embedded switches:
       - Microchip:
          - fine-tune flow control and speed configurations in KSZ8xxx
          - KSZ88X3: enable setting rmii reference
       - Renesas:
          - add jumbo frames support
       - Marvell:
          - 88E6xxx: add "eth-mac" and "rmon" stats support

   - Ethernet PHYs:
       - aquantia: add firmware load support
       - at803x: refactor the driver to simplify adding support for more
         chip variants
       - NXP C45 TJA11xx: Add MACsec offload support

   - Wifi:
       - MediaTek (mt76):
          - NVMEM EEPROM improvements
          - mt7996 Extremely High Throughput (EHT) improvements
          - mt7996 Wireless Ethernet Dispatcher (WED) support
          - mt7996 36-bit DMA support
       - Qualcomm (ath12k):
          - support for a single MSI vector
          - WCN7850: support AP mode
       - Intel (iwlwifi):
          - new debugfs file fw_dbg_clear
          - allow concurrent P2P operation on DFS channels

   - Bluetooth:
       - QCA2066: support HFP offload
       - ISO: more broadcast-related improvements
       - NXP: better recovery in case receiver/transmitter get out of sync"

* tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1714 commits)
  lan78xx: remove redundant statement in lan78xx_get_eee
  lan743x: remove redundant statement in lan743x_ethtool_get_eee
  bnxt_en: Fix RCU locking for ntuple filters in bnxt_rx_flow_steer()
  bnxt_en: Fix RCU locking for ntuple filters in bnxt_srxclsrldel()
  bnxt_en: Remove unneeded variable in bnxt_hwrm_clear_vnic_filter()
  tcp: Revert no longer abort SYN_SENT when receiving some ICMP
  Revert "mlx5 updates 2023-12-20"
  Revert "net: stmmac: Enable Per DMA Channel interrupt"
  ipvlan: Remove usage of the deprecated ida_simple_xx() API
  ipvlan: Fix a typo in a comment
  net/sched: Remove ipt action tests
  net: stmmac: Use interrupt mode INTM=1 for per channel irq
  net: stmmac: Add support for TX/RX channel interrupt
  net: stmmac: Make MSI interrupt routine generic
  dt-bindings: net: snps,dwmac: per channel irq
  net: phy: at803x: make read_status more generic
  net: phy: at803x: add support for cdt cross short test for qca808x
  net: phy: at803x: refactor qca808x cable test get status function
  net: phy: at803x: generalize cdt fault length function
  net: ethernet: cortina: Drop TSO support
  ...

20 files changed, 901 insertions, 284 deletions

diff --git a/include/uapi/linux/batadv_packet.h b/include/uapi/linux/batadv_packet.h
index 9204e4494b25..6e25753015df 100644
--- a/include/uapi/linux/batadv_packet.h
+++ b/include/uapi/linux/batadv_packet.h
@@ -116,6 +116,9 @@ enum batadv_icmp_packettype {
  * only need routable IPv4 multicast packets we signed up for explicitly
  * @BATADV_MCAST_WANT_NO_RTR6: we have no IPv6 multicast router and therefore
  * only need routable IPv6 multicast packets we signed up for explicitly
+ * @BATADV_MCAST_HAVE_MC_PTYPE_CAPA: we can parse, receive and forward
+ * batman-adv multicast packets with a multicast tracker TVLV. And all our
+ * hard interfaces have an MTU of at least 1280 bytes.
  */
 enum batadv_mcast_flags {
 	BATADV_MCAST_WANT_ALL_UNSNOOPABLES	= 1UL << 0,
@@ -123,6 +126,7 @@ enum batadv_mcast_flags {
 	BATADV_MCAST_WANT_ALL_IPV6		= 1UL << 2,
 	BATADV_MCAST_WANT_NO_RTR4		= 1UL << 3,
 	BATADV_MCAST_WANT_NO_RTR6		= 1UL << 4,
+	BATADV_MCAST_HAVE_MC_PTYPE_CAPA		= 1UL << 5,
 };
 
 /* tt data subtypes */
@@ -174,14 +178,16 @@ enum batadv_bla_claimframe {
  * @BATADV_TVLV_TT: translation table tvlv
  * @BATADV_TVLV_ROAM: roaming advertisement tvlv
  * @BATADV_TVLV_MCAST: multicast capability tvlv
+ * @BATADV_TVLV_MCAST_TRACKER: multicast tracker tvlv
  */
 enum batadv_tvlv_type {
-	BATADV_TVLV_GW		= 0x01,
-	BATADV_TVLV_DAT		= 0x02,
-	BATADV_TVLV_NC		= 0x03,
-	BATADV_TVLV_TT		= 0x04,
-	BATADV_TVLV_ROAM	= 0x05,
-	BATADV_TVLV_MCAST	= 0x06,
+	BATADV_TVLV_GW			= 0x01,
+	BATADV_TVLV_DAT			= 0x02,
+	BATADV_TVLV_NC			= 0x03,
+	BATADV_TVLV_TT			= 0x04,
+	BATADV_TVLV_ROAM		= 0x05,
+	BATADV_TVLV_MCAST		= 0x06,
+	BATADV_TVLV_MCAST_TRACKER	= 0x07,
 };
 
 #pragma pack(2)
@@ -488,6 +494,25 @@ struct batadv_bcast_packet {
 };
 
 /**
+ * struct batadv_mcast_packet - multicast packet for network payload
+ * @packet_type: batman-adv packet type, part of the general header
+ * @version: batman-adv protocol version, part of the general header
+ * @ttl: time to live for this packet, part of the general header
+ * @reserved: reserved byte for alignment
+ * @tvlv_len: length of the appended tvlv buffer (in bytes)
+ */
+struct batadv_mcast_packet {
+	__u8 packet_type;
+	__u8 version;
+	__u8 ttl;
+	__u8 reserved;
+	__be16 tvlv_len;
+	/* "4 bytes boundary + 2 bytes" long to make the payload after the
+	 * following ethernet header again 4 bytes boundary aligned
+	 */
+};
+
+/**
  * struct batadv_coded_packet - network coded packet
  * @packet_type: batman-adv packet type, part of the general header
  * @version: batman-adv protocol version, part of the general header
@@ -628,6 +653,14 @@ struct batadv_tvlv_mcast_data {
 	__u8 reserved[3];
 };
 
+/**
+ * struct batadv_tvlv_mcast_tracker - payload of a multicast tracker tvlv
+ * @num_dests: number of subsequent destination originator MAC addresses
+ */
+struct batadv_tvlv_mcast_tracker {
+	__be16	num_dests;
+};
+
 #pragma pack()
 
 #endif /* _UAPI_LINUX_BATADV_PACKET_H_ */
diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
index 0f6cdf52b1da..754e68ca8744 100644
--- a/include/uapi/linux/bpf.h
+++ b/include/uapi/linux/bpf.h
@@ -1074,9 +1074,11 @@ enum bpf_link_type {
 	BPF_LINK_TYPE_TCX = 11,
 	BPF_LINK_TYPE_UPROBE_MULTI = 12,
 	BPF_LINK_TYPE_NETKIT = 13,
-	MAX_BPF_LINK_TYPE,
+	__MAX_BPF_LINK_TYPE,
 };
 
+#define MAX_BPF_LINK_TYPE __MAX_BPF_LINK_TYPE
+
 enum bpf_perf_event_type {
 	BPF_PERF_EVENT_UNSPEC = 0,
 	BPF_PERF_EVENT_UPROBE = 1,
@@ -1200,6 +1202,9 @@ enum bpf_perf_event_type {
  */
 #define BPF_F_XDP_DEV_BOUND_ONLY	(1U << 6)
 
+/* The verifier internal test flag. Behavior is undefined */
+#define BPF_F_TEST_REG_INVARIANTS	(1U << 7)
+
 /* link_create.kprobe_multi.flags used in LINK_CREATE command for
  * BPF_TRACE_KPROBE_MULTI attach type to create return probe.
  */
@@ -4517,6 +4522,8 @@ union bpf_attr {
  * long bpf_get_task_stack(struct task_struct *task, void *buf, u32 size, u64 flags)
  *	Description
  *		Return a user or a kernel stack in bpf program provided buffer.
+ *		Note: the user stack will only be populated if the *task* is
+ *		the current task; all other tasks will return -EOPNOTSUPP.
  *		To achieve this, the helper needs *task*, which is a valid
  *		pointer to **struct task_struct**. To store the stacktrace, the
  *		bpf program provides *buf* with a nonnegative *size*.
@@ -4528,6 +4535,7 @@ union bpf_attr {
  *
  *		**BPF_F_USER_STACK**
  *			Collect a user space stack instead of a kernel stack.
+ *			The *task* must be the current task.
  *		**BPF_F_USER_BUILD_ID**
  *			Collect buildid+offset instead of ips for user stack,
  *			only valid if **BPF_F_USER_STACK** is also specified.
@@ -6557,6 +6565,16 @@ struct bpf_link_info {
 			__u64 missed;
 		} kprobe_multi;
 		struct {
+			__aligned_u64 path;
+			__aligned_u64 offsets;
+			__aligned_u64 ref_ctr_offsets;
+			__aligned_u64 cookies;
+			__u32 path_size; /* in/out: real path size on success, including zero byte */
+			__u32 count; /* in/out: uprobe_multi offsets/ref_ctr_offsets/cookies count */
+			__u32 flags;
+			__u32 pid;
+		} uprobe_multi;
+		struct {
 			__u32 type; /* enum bpf_perf_event_type */
 			__u32 :32;
 			union {
@@ -6886,6 +6904,7 @@ enum {
 	BPF_TCP_LISTEN,
 	BPF_TCP_CLOSING,	/* Now a valid state */
 	BPF_TCP_NEW_SYN_RECV,
+	BPF_TCP_BOUND_INACTIVE,
 
 	BPF_TCP_MAX_STATES	/* Leave at the end! */
 };
@@ -7151,40 +7170,31 @@ struct bpf_spin_lock {
 };
 
 struct bpf_timer {
-	__u64 :64;
-	__u64 :64;
+	__u64 __opaque[2];
 } __attribute__((aligned(8)));
 
 struct bpf_dynptr {
-	__u64 :64;
-	__u64 :64;
+	__u64 __opaque[2];
 } __attribute__((aligned(8)));
 
 struct bpf_list_head {
-	__u64 :64;
-	__u64 :64;
+	__u64 __opaque[2];
 } __attribute__((aligned(8)));
 
 struct bpf_list_node {
-	__u64 :64;
-	__u64 :64;
-	__u64 :64;
+	__u64 __opaque[3];
 } __attribute__((aligned(8)));
 
 struct bpf_rb_root {
-	__u64 :64;
-	__u64 :64;
+	__u64 __opaque[2];
 } __attribute__((aligned(8)));
 
 struct bpf_rb_node {
-	__u64 :64;
-	__u64 :64;
-	__u64 :64;
-	__u64 :64;
+	__u64 __opaque[4];
 } __attribute__((aligned(8)));
 
 struct bpf_refcount {
-	__u32 :32;
+	__u32 __opaque[1];
 } __attribute__((aligned(4)));
 
 struct bpf_sysctl {
diff --git a/include/uapi/linux/bpfilter.h b/include/uapi/linux/bpfilter.h
deleted file mode 100644
index cbc1f5813f50..000000000000
--- a/include/uapi/linux/bpfilter.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef _UAPI_LINUX_BPFILTER_H
-#define _UAPI_LINUX_BPFILTER_H
-
-#include <linux/if.h>
-
-enum {
-	BPFILTER_IPT_SO_SET_REPLACE = 64,
-	BPFILTER_IPT_SO_SET_ADD_COUNTERS = 65,
-	BPFILTER_IPT_SET_MAX,
-};
-
-enum {
-	BPFILTER_IPT_SO_GET_INFO = 64,
-	BPFILTER_IPT_SO_GET_ENTRIES = 65,
-	BPFILTER_IPT_SO_GET_REVISION_MATCH = 66,
-	BPFILTER_IPT_SO_GET_REVISION_TARGET = 67,
-	BPFILTER_IPT_GET_MAX,
-};
-
-#endif /* _UAPI_LINUX_BPFILTER_H */
diff --git a/include/uapi/linux/devlink.h b/include/uapi/linux/devlink.h
index b3c8383d342d..130cae0d3e20 100644
--- a/include/uapi/linux/devlink.h
+++ b/include/uapi/linux/devlink.h
@@ -139,6 +139,8 @@ enum devlink_command {
 	DEVLINK_CMD_SELFTESTS_GET,	/* can dump */
 	DEVLINK_CMD_SELFTESTS_RUN,
 
+	DEVLINK_CMD_NOTIFY_FILTER_SET,
+
 	/* add new commands above here */
 	__DEVLINK_CMD_MAX,
 	DEVLINK_CMD_MAX = __DEVLINK_CMD_MAX - 1
diff --git a/include/uapi/linux/dpll.h b/include/uapi/linux/dpll.h
index 715a491d2727..b4e947f9bfbc 100644
--- a/include/uapi/linux/dpll.h
+++ b/include/uapi/linux/dpll.h
@@ -179,6 +179,7 @@ enum dpll_a_pin {
 	DPLL_A_PIN_PHASE_ADJUST_MAX,
 	DPLL_A_PIN_PHASE_ADJUST,
 	DPLL_A_PIN_PHASE_OFFSET,
+	DPLL_A_PIN_FRACTIONAL_FREQUENCY_OFFSET,
 
 	__DPLL_A_PIN_MAX,
 	DPLL_A_PIN_MAX = (__DPLL_A_PIN_MAX - 1)
diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h
index f7fba0dc87e5..06ef6b78b7de 100644
--- a/include/uapi/linux/ethtool.h
+++ b/include/uapi/linux/ethtool.h
@@ -1266,6 +1266,8 @@ struct ethtool_rxfh_indir {
  *	hardware hash key.
  * @hfunc: Defines the current RSS hash function used by HW (or to be set to).
  *	Valid values are one of the %ETH_RSS_HASH_*.
+ * @input_xfrm: Defines how the input data is transformed. Valid values are one
+ *	of %RXH_XFRM_*.
  * @rsvd8: Reserved for future use; see the note on reserved space.
  * @rsvd32: Reserved for future use; see the note on reserved space.
  * @rss_config: RX ring/queue index for each hash value i.e., indirection table
@@ -1285,7 +1287,8 @@ struct ethtool_rxfh {
 	__u32   indir_size;
 	__u32   key_size;
 	__u8	hfunc;
-	__u8	rsvd8[3];
+	__u8	input_xfrm;
+	__u8	rsvd8[2];
 	__u32	rsvd32;
 	__u32   rss_config[];
 };
@@ -1992,6 +1995,15 @@ static inline int ethtool_validate_duplex(__u8 duplex)
 
 #define WOL_MODE_COUNT		8
 
+/* RSS hash function data
+ * XOR the corresponding source and destination fields of each specified
+ * protocol. Both copies of the XOR'ed fields are fed into the RSS and RXHASH
+ * calculation. Note that this XORing reduces the input set entropy and could
+ * be exploited to reduce the RSS queue spread.
+ */
+#define	RXH_XFRM_SYM_XOR	(1 << 0)
+#define	RXH_XFRM_NO_CHANGE	0xff
+
 /* L2-L4 network traffic flow types */
 #define	TCP_V4_FLOW	0x01	/* hash or spec (tcp_ip4_spec) */
 #define	UDP_V4_FLOW	0x02	/* hash or spec (udp_ip4_spec) */
@@ -2128,18 +2140,6 @@ enum ethtool_reset_flags {
  *	refused. For drivers: ignore this field (use kernel's
  *	__ETHTOOL_LINK_MODE_MASK_NBITS instead), any change to it will
  *	be overwritten by kernel.
- * @supported: Bitmap with each bit meaning given by
- *	%ethtool_link_mode_bit_indices for the link modes, physical
- *	connectors and other link features for which the interface
- *	supports autonegotiation or auto-detection.  Read-only.
- * @advertising: Bitmap with each bit meaning given by
- *	%ethtool_link_mode_bit_indices for the link modes, physical
- *	connectors and other link features that are advertised through
- *	autonegotiation or enabled for auto-detection.
- * @lp_advertising: Bitmap with each bit meaning given by
- *	%ethtool_link_mode_bit_indices for the link modes, and other
- *	link features that the link partner advertised through
- *	autonegotiation; 0 if unknown or not applicable.  Read-only.
  * @transceiver: Used to distinguish different possible PHY types,
  *	reported consistently by PHYLIB.  Read-only.
  * @master_slave_cfg: Master/slave port mode.
@@ -2181,6 +2181,21 @@ enum ethtool_reset_flags {
  * %set_link_ksettings() should validate all fields other than @cmd
  * and @link_mode_masks_nwords that are not described as read-only or
  * deprecated, and must ignore all fields described as read-only.
+ *
+ * @link_mode_masks is divided into three bitfields, each of length
+ * @link_mode_masks_nwords:
+ * - supported: Bitmap with each bit meaning given by
+ *	%ethtool_link_mode_bit_indices for the link modes, physical
+ *	connectors and other link features for which the interface
+ *	supports autonegotiation or auto-detection.  Read-only.
+ * - advertising: Bitmap with each bit meaning given by
+ *	%ethtool_link_mode_bit_indices for the link modes, physical
+ *	connectors and other link features that are advertised through
+ *	autonegotiation or enabled for auto-detection.
+ * - lp_advertising: Bitmap with each bit meaning given by
+ *	%ethtool_link_mode_bit_indices for the link modes, and other
+ *	link features that the link partner advertised through
+ *	autonegotiation; 0 if unknown or not applicable.  Read-only.
  */
 struct ethtool_link_settings {
 	__u32	cmd;
diff --git a/include/uapi/linux/ethtool_netlink.h b/include/uapi/linux/ethtool_netlink.h
index 73e2c10dc2cc..3f89074aa06c 100644
--- a/include/uapi/linux/ethtool_netlink.h
+++ b/include/uapi/linux/ethtool_netlink.h
@@ -908,6 +908,7 @@ enum {
 	ETHTOOL_A_RSS_HFUNC,		/* u32 */
 	ETHTOOL_A_RSS_INDIR,		/* binary */
 	ETHTOOL_A_RSS_HKEY,		/* binary */
+	ETHTOOL_A_RSS_INPUT_XFRM,	/* u32 */
 
 	__ETHTOOL_A_RSS_CNT,
 	ETHTOOL_A_RSS_MAX = (__ETHTOOL_A_RSS_CNT - 1),
diff --git a/include/uapi/linux/if_bridge.h b/include/uapi/linux/if_bridge.h
index 2e23f99dc0f1..a5b743a2f775 100644
--- a/include/uapi/linux/if_bridge.h
+++ b/include/uapi/linux/if_bridge.h
@@ -757,6 +757,7 @@ enum {
 	MDBE_ATTR_VNI,
 	MDBE_ATTR_IFINDEX,
 	MDBE_ATTR_SRC_VNI,
+	MDBE_ATTR_STATE_MASK,
 	__MDBE_ATTR_MAX,
 };
 #define MDBE_ATTR_MAX (__MDBE_ATTR_MAX - 1)
diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h
index 29ff80da2775..ab9bcff96e4d 100644
--- a/include/uapi/linux/if_link.h
+++ b/include/uapi/linux/if_link.h
@@ -461,6 +461,286 @@ enum in6_addr_gen_mode {
 
 /* Bridge section */
 
+/**
+ * DOC: Bridge enum definition
+ *
+ * Please *note* that the timer values in the following section are expected
+ * in clock_t format, which is seconds multiplied by USER_HZ (generally
+ * defined as 100).
+ *
+ * @IFLA_BR_FORWARD_DELAY
+ *   The bridge forwarding delay is the time spent in LISTENING state
+ *   (before moving to LEARNING) and in LEARNING state (before moving
+ *   to FORWARDING). Only relevant if STP is enabled.
+ *
+ *   The valid values are between (2 * USER_HZ) and (30 * USER_HZ).
+ *   The default value is (15 * USER_HZ).
+ *
+ * @IFLA_BR_HELLO_TIME
+ *   The time between hello packets sent by the bridge, when it is a root
+ *   bridge or a designated bridge. Only relevant if STP is enabled.
+ *
+ *   The valid values are between (1 * USER_HZ) and (10 * USER_HZ).
+ *   The default value is (2 * USER_HZ).
+ *
+ * @IFLA_BR_MAX_AGE
+ *   The hello packet timeout is the time until another bridge in the
+ *   spanning tree is assumed to be dead, after reception of its last hello
+ *   message. Only relevant if STP is enabled.
+ *
+ *   The valid values are between (6 * USER_HZ) and (40 * USER_HZ).
+ *   The default value is (20 * USER_HZ).
+ *
+ * @IFLA_BR_AGEING_TIME
+ *   Configure the bridge's FDB entries aging time. It is the time a MAC
+ *   address will be kept in the FDB after a packet has been received from
+ *   that address. After this time has passed, entries are cleaned up.
+ *   Allow values outside the 802.1 standard specification for special cases:
+ *
+ *     * 0 - entry never ages (all permanent)
+ *     * 1 - entry disappears (no persistence)
+ *
+ *   The default value is (300 * USER_HZ).
+ *
+ * @IFLA_BR_STP_STATE
+ *   Turn spanning tree protocol on (*IFLA_BR_STP_STATE* > 0) or off
+ *   (*IFLA_BR_STP_STATE* == 0) for this bridge.
+ *
+ *   The default value is 0 (disabled).
+ *
+ * @IFLA_BR_PRIORITY
+ *   Set this bridge's spanning tree priority, used during STP root bridge
+ *   election.
+ *
+ *   The valid values are between 0 and 65535.
+ *
+ * @IFLA_BR_VLAN_FILTERING
+ *   Turn VLAN filtering on (*IFLA_BR_VLAN_FILTERING* > 0) or off
+ *   (*IFLA_BR_VLAN_FILTERING* == 0). When disabled, the bridge will not
+ *   consider the VLAN tag when handling packets.
+ *
+ *   The default value is 0 (disabled).
+ *
+ * @IFLA_BR_VLAN_PROTOCOL
+ *   Set the protocol used for VLAN filtering.
+ *
+ *   The valid values are 0x8100(802.1Q) or 0x88A8(802.1AD). The default value
+ *   is 0x8100(802.1Q).
+ *
+ * @IFLA_BR_GROUP_FWD_MASK
+ *   The group forwarding mask. This is the bitmask that is applied to
+ *   decide whether to forward incoming frames destined to link-local
+ *   addresses (of the form 01:80:C2:00:00:0X).
+ *
+ *   The default value is 0, which means the bridge does not forward any
+ *   link-local frames coming on this port.
+ *
+ * @IFLA_BR_ROOT_ID
+ *   The bridge root id, read only.
+ *
+ * @IFLA_BR_BRIDGE_ID
+ *   The bridge id, read only.
+ *
+ * @IFLA_BR_ROOT_PORT
+ *   The bridge root port, read only.
+ *
+ * @IFLA_BR_ROOT_PATH_COST
+ *   The bridge root path cost, read only.
+ *
+ * @IFLA_BR_TOPOLOGY_CHANGE
+ *   The bridge topology change, read only.
+ *
+ * @IFLA_BR_TOPOLOGY_CHANGE_DETECTED
+ *   The bridge topology change detected, read only.
+ *
+ * @IFLA_BR_HELLO_TIMER
+ *   The bridge hello timer, read only.
+ *
+ * @IFLA_BR_TCN_TIMER
+ *   The bridge tcn timer, read only.
+ *
+ * @IFLA_BR_TOPOLOGY_CHANGE_TIMER
+ *   The bridge topology change timer, read only.
+ *
+ * @IFLA_BR_GC_TIMER
+ *   The bridge gc timer, read only.
+ *
+ * @IFLA_BR_GROUP_ADDR
+ *   Set the MAC address of the multicast group this bridge uses for STP.
+ *   The address must be a link-local address in standard Ethernet MAC address
+ *   format. It is an address of the form 01:80:C2:00:00:0X, with X in [0, 4..f].
+ *
+ *   The default value is 0.
+ *
+ * @IFLA_BR_FDB_FLUSH
+ *   Flush bridge's fdb dynamic entries.
+ *
+ * @IFLA_BR_MCAST_ROUTER
+ *   Set bridge's multicast router if IGMP snooping is enabled.
+ *   The valid values are:
+ *
+ *     * 0 - disabled.
+ *     * 1 - automatic (queried).
+ *     * 2 - permanently enabled.
+ *
+ *   The default value is 1.
+ *
+ * @IFLA_BR_MCAST_SNOOPING
+ *   Turn multicast snooping on (*IFLA_BR_MCAST_SNOOPING* > 0) or off
+ *   (*IFLA_BR_MCAST_SNOOPING* == 0).
+ *
+ *   The default value is 1.
+ *
+ * @IFLA_BR_MCAST_QUERY_USE_IFADDR
+ *   If enabled use the bridge's own IP address as source address for IGMP
+ *   queries (*IFLA_BR_MCAST_QUERY_USE_IFADDR* > 0) or the default of 0.0.0.0
+ *   (*IFLA_BR_MCAST_QUERY_USE_IFADDR* == 0).
+ *
+ *   The default value is 0 (disabled).
+ *
+ * @IFLA_BR_MCAST_QUERIER
+ *   Enable (*IFLA_BR_MULTICAST_QUERIER* > 0) or disable
+ *   (*IFLA_BR_MULTICAST_QUERIER* == 0) IGMP querier, ie sending of multicast
+ *   queries by the bridge.
+ *
+ *   The default value is 0 (disabled).
+ *
+ * @IFLA_BR_MCAST_HASH_ELASTICITY
+ *   Set multicast database hash elasticity, It is the maximum chain length in
+ *   the multicast hash table. This attribute is *deprecated* and the value
+ *   is always 16.
+ *
+ * @IFLA_BR_MCAST_HASH_MAX
+ *   Set maximum size of the multicast hash table
+ *
+ *   The default value is 4096, the value must be a power of 2.
+ *
+ * @IFLA_BR_MCAST_LAST_MEMBER_CNT
+ *   The Last Member Query Count is the number of Group-Specific Queries
+ *   sent before the router assumes there are no local members. The Last
+ *   Member Query Count is also the number of Group-and-Source-Specific
+ *   Queries sent before the router assumes there are no listeners for a
+ *   particular source.
+ *
+ *   The default value is 2.
+ *
+ * @IFLA_BR_MCAST_STARTUP_QUERY_CNT
+ *   The Startup Query Count is the number of Queries sent out on startup,
+ *   separated by the Startup Query Interval.
+ *
+ *   The default value is 2.
+ *
+ * @IFLA_BR_MCAST_LAST_MEMBER_INTVL
+ *   The Last Member Query Interval is the Max Response Time inserted into
+ *   Group-Specific Queries sent in response to Leave Group messages, and
+ *   is also the amount of time between Group-Specific Query messages.
+ *
+ *   The default value is (1 * USER_HZ).
+ *
+ * @IFLA_BR_MCAST_MEMBERSHIP_INTVL
+ *   The interval after which the bridge will leave a group, if no membership
+ *   reports for this group are received.
+ *
+ *   The default value is (260 * USER_HZ).
+ *
+ * @IFLA_BR_MCAST_QUERIER_INTVL
+ *   The interval between queries sent by other routers. if no queries are
+ *   seen after this delay has passed, the bridge will start to send its own
+ *   queries (as if *IFLA_BR_MCAST_QUERIER_INTVL* was enabled).
+ *
+ *   The default value is (255 * USER_HZ).
+ *
+ * @IFLA_BR_MCAST_QUERY_INTVL
+ *   The Query Interval is the interval between General Queries sent by
+ *   the Querier.
+ *
+ *   The default value is (125 * USER_HZ). The minimum value is (1 * USER_HZ).
+ *
+ * @IFLA_BR_MCAST_QUERY_RESPONSE_INTVL
+ *   The Max Response Time used to calculate the Max Resp Code inserted
+ *   into the periodic General Queries.
+ *
+ *   The default value is (10 * USER_HZ).
+ *
+ * @IFLA_BR_MCAST_STARTUP_QUERY_INTVL
+ *   The interval between queries in the startup phase.
+ *
+ *   The default value is (125 * USER_HZ) / 4. The minimum value is (1 * USER_HZ).
+ *
+ * @IFLA_BR_NF_CALL_IPTABLES
+ *   Enable (*NF_CALL_IPTABLES* > 0) or disable (*NF_CALL_IPTABLES* == 0)
+ *   iptables hooks on the bridge.
+ *
+ *   The default value is 0 (disabled).
+ *
+ * @IFLA_BR_NF_CALL_IP6TABLES
+ *   Enable (*NF_CALL_IP6TABLES* > 0) or disable (*NF_CALL_IP6TABLES* == 0)
+ *   ip6tables hooks on the bridge.
+ *
+ *   The default value is 0 (disabled).
+ *
+ * @IFLA_BR_NF_CALL_ARPTABLES
+ *   Enable (*NF_CALL_ARPTABLES* > 0) or disable (*NF_CALL_ARPTABLES* == 0)
+ *   arptables hooks on the bridge.
+ *
+ *   The default value is 0 (disabled).
+ *
+ * @IFLA_BR_VLAN_DEFAULT_PVID
+ *   VLAN ID applied to untagged and priority-tagged incoming packets.
+ *
+ *   The default value is 1. Setting to the special value 0 makes all ports of
+ *   this bridge not have a PVID by default, which means that they will
+ *   not accept VLAN-untagged traffic.
+ *
+ * @IFLA_BR_PAD
+ *   Bridge attribute padding type for netlink message.
+ *
+ * @IFLA_BR_VLAN_STATS_ENABLED
+ *   Enable (*IFLA_BR_VLAN_STATS_ENABLED* == 1) or disable
+ *   (*IFLA_BR_VLAN_STATS_ENABLED* == 0) per-VLAN stats accounting.
+ *
+ *   The default value is 0 (disabled).
+ *
+ * @IFLA_BR_MCAST_STATS_ENABLED
+ *   Enable (*IFLA_BR_MCAST_STATS_ENABLED* > 0) or disable
+ *   (*IFLA_BR_MCAST_STATS_ENABLED* == 0) multicast (IGMP/MLD) stats
+ *   accounting.
+ *
+ *   The default value is 0 (disabled).
+ *
+ * @IFLA_BR_MCAST_IGMP_VERSION
+ *   Set the IGMP version.
+ *
+ *   The valid values are 2 and 3. The default value is 2.
+ *
+ * @IFLA_BR_MCAST_MLD_VERSION
+ *   Set the MLD version.
+ *
+ *   The valid values are 1 and 2. The default value is 1.
+ *
+ * @IFLA_BR_VLAN_STATS_PER_PORT
+ *   Enable (*IFLA_BR_VLAN_STATS_PER_PORT* == 1) or disable
+ *   (*IFLA_BR_VLAN_STATS_PER_PORT* == 0) per-VLAN per-port stats accounting.
+ *   Can be changed only when there are no port VLANs configured.
+ *
+ *   The default value is 0 (disabled).
+ *
+ * @IFLA_BR_MULTI_BOOLOPT
+ *   The multi_boolopt is used to control new boolean options to avoid adding
+ *   new netlink attributes. You can look at ``enum br_boolopt_id`` for those
+ *   options.
+ *
+ * @IFLA_BR_MCAST_QUERIER_STATE
+ *   Bridge mcast querier states, read only.
+ *
+ * @IFLA_BR_FDB_N_LEARNED
+ *   The number of dynamically learned FDB entries for the current bridge,
+ *   read only.
+ *
+ * @IFLA_BR_FDB_MAX_LEARNED
+ *   Set the number of max dynamically learned FDB entries for the current
+ *   bridge.
+ */
 enum {
 	IFLA_BR_UNSPEC,
 	IFLA_BR_FORWARD_DELAY,