Merge tag 'net-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Support usec resolution of TCP timestamps, enabled selectively by a
     route attribute.

   - Defer regular TCP ACK while processing socket backlog, try to send
     a cumulative ACK at the end. Increase single TCP flow performance
     on a 200Gbit NIC by 20% (100Gbit -> 120Gbit).

   - The Fair Queuing (FQ) packet scheduler:
       - add built-in 3 band prio / WRR scheduling
       - support bypass if the qdisc is mostly idle (5% speed up for TCP RR)
       - improve inactive flow reporting
       - optimize the layout of structures for better cache locality

   - Support TCP Authentication Option (RFC 5925, TCP-AO), a more modern
     replacement for the old MD5 option.

   - Add more retransmission timeout (RTO) related statistics to
     TCP_INFO.

   - Support sending fragmented skbs over vsock sockets.

   - Make sure we send SIGPIPE for vsock sockets if socket was
     shutdown().

   - Add sysctl for ignoring lower limit on lifetime in Router
     Advertisement PIO, based on an in-progress IETF draft.

   - Add sysctl to control activation of TCP ping-pong mode.

   - Add sysctl to make connection timeout in MPTCP configurable.

   - Support rcvlowat and notsent_lowat on MPTCP sockets, to help apps
     limit the number of wakeups.

   - Support netlink GET for MDB (multicast forwarding), allowing user
     space to request a single MDB entry instead of dumping the entire
     table.

   - Support selective FDB flushing in the VXLAN tunnel driver.

   - Allow limiting learned FDB entries in bridges, prevent OOM attacks.

   - Allow controlling via configfs netconsole targets which were
     created via the kernel cmdline at boot, rather than via configfs at
     runtime.

   - Support multiple PTP timestamp event queue readers with different
     filters.

   - MCTP over I3C.

  BPF:

   - Add new veth-like netdevice where BPF program defines the logic of
     the xmit routine. It can operate in L3 and L2 mode.

   - Support exceptions - allow asserting conditions which should never
     be true but are hard for the verifier to infer. With some extra
     flexibility around handling of the exit / failure:

          https://lwn.net/Articles/938435/

   - Add support for local per-cpu kptr, allow allocating and storing
     per-cpu objects in maps. Access to those objects operates on the
     value for the current CPU.

     This allows to deprecate local one-off implementations of per-CPU
     storage like BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE maps.

   - Extend cgroup BPF sockaddr hooks for UNIX sockets. The use case is
     for systemd to re-implement the LogNamespace feature which allows
     running multiple instances of systemd-journald to process the logs
     of different services.

   - Enable open-coded task_vma iteration, after maple tree conversion
     made it hard to directly walk VMAs in tracing programs.

   - Add open-coded task, css_task and css iterator support. One of the
     use cases is customizable OOM victim selection via BPF.

   - Allow source address selection with bpf_*_fib_lookup().

   - Add ability to pin BPF timer to the current CPU.

   - Prevent creation of infinite loops by combining tail calls and
     fentry/fexit programs.

   - Add missed stats for kprobes to retrieve the number of missed
     kprobe executions and subsequent executions of BPF programs.

   - Inherit system settings for CPU security mitigations.

   - Add BPF v4 CPU instruction support for arm32 and s390x.

  Changes to common code:

   - overflow: add DEFINE_FLEX() for on-stack definition of structs with
     flexible array members.

   - Process doc update with more guidance for reviewers.

  Driver API:

   - Simplify locking in WiFi (cfg80211 and mac80211 layers), use wiphy
     mutex in most places and remove a lot of smaller locks.

   - Create a common DPLL configuration API. Allow configuring and
     querying state of PLL circuits used for clock syntonization, in
     network time distribution.

   - Unify fragmented and full page allocation APIs in page pool code.
     Let drivers be ignorant of PAGE_SIZE.

   - Rework PHY state machine to avoid races with calls to phy_stop().

   - Notify DSA drivers of MAC address changes on user ports, improve
     correctness of offloads which depend on matching port MAC
     addresses.

   - Allow antenna control on injected WiFi frames.

   - Reduce the number of variants of napi_schedule().

   - Simplify error handling when composing devlink health messages.

  Misc:

   - A lot of KCSAN data race "fixes", from Eric.

   - A lot of __counted_by() annotations, from Kees.

   - A lot of strncpy -> strscpy and printf format fixes.

   - Replace master/slave terminology with conduit/user in DSA drivers.

   - Handful of KUnit tests for netdev and WiFi core.

  Removed:

   - AppleTalk COPS.

   - AppleTalk ipddp.

   - TI AR7 CPMAC Ethernet driver.

  Drivers:

   - Ethernet high-speed NICs:
      - Intel (100G, ice, idpf):
         - add a driver for the Intel E2000 IPUs
         - make CRC/FCS stripping configurable
         - cross-timestamping for E823 devices
         - basic support for E830 devices
         - use aux-bus for managing client drivers
         - i40e: report firmware versions via devlink
      - nVidia/Mellanox:
         - support 4-port NICs
         - increase max number of channels to 256
         - optimize / parallelize SF creation flow
      - Broadcom (bnxt):
         - enhance NIC temperature reporting
         - support PAM4 speeds and lane configuration
      - Marvell OcteonTX2:
         - PTP pulse-per-second output support
         - enable hardware timestamping for VFs
      - Solarflare/AMD:
         - conntrack NAT offload and offload for tunnels
      - Wangxun (ngbe/txgbe):
         - expose HW statistics
      - Pensando/AMD:
         - support PCI level reset
         - narrow down the condition under which skbs are linearized
      - Netronome/Corigine (nfp):
         - support CHACHA20-POLY1305 crypto in IPsec offload

   - Ethernet NICs embedded, slower, virtual:
      - Synopsys (stmmac):
         - add Loongson-1 SoC support
         - enable use of HW queues with no offload capabilities
         - enable PPS input support on all 5 channels
         - increase TX coalesce timer to 5ms
      - RealTek USB (r8152): improve efficiency of Rx by using GRO frags
      - xen: support SW packet timestamping
      - add drivers for implementations based on TI's PRUSS (AM64x EVM)

   - nVidia/Mellanox Ethernet datacenter switches:
      - avoid poor HW resource use on Spectrum-4 by better block
        selection for IPv6 multicast forwarding and ordering of blocks
        in ACL region

   - Ethernet embedded switches:
      - Microchip:
         - support configuring the drive strength for EMI compliance
         - ksz9477: partial ACL support
         - ksz9477: HSR offload
         - ksz9477: Wake on LAN
      - Realtek:
         - rtl8366rb: respect device tree config of the CPU port

   - Ethernet PHYs:
      - support Broadcom BCM5221 PHYs
      - TI dp83867: support hardware LED blinking

   - CAN:
      - add support for Linux-PHY based CAN transceivers
      - at91_can: clean up and use rx-offload helpers

   - WiFi:
      - MediaTek (mt76):
         - new sub-driver for mt7925 USB/PCIe devices
         - HW wireless <> Ethernet bridging in MT7988 chips
         - mt7603/mt7628 stability improvements
      - Qualcomm (ath12k):
         - WCN7850:
            - enable 320 MHz channels in 6 GHz band
            - hardware rfkill support
            - enable IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS to
              make scan faster
            - read board data variant name from SMBIOS
        - QCN9274: mesh support
      - RealTek (rtw89):
         - TDMA-based multi-channel concurrency (MCC)
      - Silicon Labs (wfx):
         - Remain-On-Channel (ROC) support

   - Bluetooth:
      - ISO: many improvements for broadcast support
      - mark BCM4378/BCM4387 as BROKEN_LE_CODED
      - add support for QCA2066
      - btmtksdio: enable Bluetooth wakeup from suspend"

* tag 'net-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1816 commits)
  net: pcs: xpcs: Add 2500BASE-X case in get state for XPCS drivers
  net: bpf: Use sockopt_lock_sock() in ip_sock_set_tos()
  net: mana: Use xdp_set_features_flag instead of direct assignment
  vxlan: Cleanup IFLA_VXLAN_PORT_RANGE entry in vxlan_get_size()
  iavf: delete the iavf client interface
  iavf: add a common function for undoing the interrupt scheme
  iavf: use unregister_netdev
  iavf: rely on netdev's own registered state
  iavf: fix the waiting time for initial reset
  iavf: in iavf_down, don't queue watchdog_task if comms failed
  iavf: simplify mutex_trylock+sleep loops
  iavf: fix comments about old bit locks
  doc/netlink: Update schema to support cmd-cnt-name and cmd-max-name
  tools: ynl: introduce option to process unknown attributes or types
  ipvlan: properly track tx_errors
  netdevsim: Block until all devices are released
  nfp: using napi_build_skb() to replace build_skb()
  net: dsa: microchip: ksz9477: Fix spelling mistake "Enery" -> "Energy"
  net: dsa: microchip: Ensure Stable PME Pin State for Wake-on-LAN
  net: dsa: microchip: Refactor switch shutdown routine for WoL preparation
  ...

16 files changed, 686 insertions, 190 deletions

diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
index 0448700890f7..0f6cdf52b1da 100644
--- a/include/uapi/linux/bpf.h
+++ b/include/uapi/linux/bpf.h
@@ -932,7 +932,14 @@ enum bpf_map_type {
 	 */
 	BPF_MAP_TYPE_CGROUP_STORAGE = BPF_MAP_TYPE_CGROUP_STORAGE_DEPRECATED,
 	BPF_MAP_TYPE_REUSEPORT_SOCKARRAY,
-	BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE,
+	BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE_DEPRECATED,
+	/* BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE is available to bpf programs
+	 * attaching to a cgroup. The new mechanism (BPF_MAP_TYPE_CGRP_STORAGE +
+	 * local percpu kptr) supports all BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE
+	 * functionality and more. So mark * BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE
+	 * deprecated.
+	 */
+	BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE = BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE_DEPRECATED,
 	BPF_MAP_TYPE_QUEUE,
 	BPF_MAP_TYPE_STACK,
 	BPF_MAP_TYPE_SK_STORAGE,
@@ -1040,6 +1047,13 @@ enum bpf_attach_type {
 	BPF_TCX_INGRESS,
 	BPF_TCX_EGRESS,
 	BPF_TRACE_UPROBE_MULTI,
+	BPF_CGROUP_UNIX_CONNECT,
+	BPF_CGROUP_UNIX_SENDMSG,
+	BPF_CGROUP_UNIX_RECVMSG,
+	BPF_CGROUP_UNIX_GETPEERNAME,
+	BPF_CGROUP_UNIX_GETSOCKNAME,
+	BPF_NETKIT_PRIMARY,
+	BPF_NETKIT_PEER,
 	__MAX_BPF_ATTACH_TYPE
 };
 
@@ -1059,6 +1073,7 @@ enum bpf_link_type {
 	BPF_LINK_TYPE_NETFILTER = 10,
 	BPF_LINK_TYPE_TCX = 11,
 	BPF_LINK_TYPE_UPROBE_MULTI = 12,
+	BPF_LINK_TYPE_NETKIT = 13,
 	MAX_BPF_LINK_TYPE,
 };
 
@@ -1644,6 +1659,13 @@ union bpf_attr {
 				__u32		flags;
 				__u32		pid;
 			} uprobe_multi;
+			struct {
+				union {
+					__u32	relative_fd;
+					__u32	relative_id;
+				};
+				__u64		expected_revision;
+			} netkit;
 		};
 	} link_create;
 
@@ -2697,8 +2719,8 @@ union bpf_attr {
  * 		*bpf_socket* should be one of the following:
  *
  * 		* **struct bpf_sock_ops** for **BPF_PROG_TYPE_SOCK_OPS**.
- * 		* **struct bpf_sock_addr** for **BPF_CGROUP_INET4_CONNECT**
- * 		  and **BPF_CGROUP_INET6_CONNECT**.
+ *		* **struct bpf_sock_addr** for **BPF_CGROUP_INET4_CONNECT**,
+ *		  **BPF_CGROUP_INET6_CONNECT** and **BPF_CGROUP_UNIX_CONNECT**.
  *
  * 		This helper actually implements a subset of **setsockopt()**.
  * 		It supports the following *level*\ s:
@@ -2936,8 +2958,8 @@ union bpf_attr {
  * 		*bpf_socket* should be one of the following:
  *
  * 		* **struct bpf_sock_ops** for **BPF_PROG_TYPE_SOCK_OPS**.
- * 		* **struct bpf_sock_addr** for **BPF_CGROUP_INET4_CONNECT**
- * 		  and **BPF_CGROUP_INET6_CONNECT**.
+ *		* **struct bpf_sock_addr** for **BPF_CGROUP_INET4_CONNECT**,
+ *		  **BPF_CGROUP_INET6_CONNECT** and **BPF_CGROUP_UNIX_CONNECT**.
  *
  * 		This helper actually implements a subset of **getsockopt()**.
  * 		It supports the same set of *optname*\ s that is supported by
@@ -3257,6 +3279,11 @@ union bpf_attr {
  *			and *params*->smac will not be set as output. A common
  *			use case is to call **bpf_redirect_neigh**\ () after
  *			doing **bpf_fib_lookup**\ ().
+ *		**BPF_FIB_LOOKUP_SRC**
+ *			Derive and set source IP addr in *params*->ipv{4,6}_src
+ *			for the nexthop. If the src addr cannot be derived,
+ *			**BPF_FIB_LKUP_RET_NO_SRC_ADDR** is returned. In this
+ *			case, *params*->dmac and *params*->smac are not set either.
  *
  *		*ctx* is either **struct xdp_md** for XDP programs or
  *		**struct sk_buff** tc cls_act programs.
@@ -5089,6 +5116,8 @@ union bpf_attr {
  *		**BPF_F_TIMER_ABS**
  *			Start the timer in absolute expire value instead of the
  *			default relative one.
+ *		**BPF_F_TIMER_CPU_PIN**
+ *			Timer will be pinned to the CPU of the caller.
  *
  *	Return
  *		0 on success.
@@ -6525,6 +6554,7 @@ struct bpf_link_info {
 			__aligned_u64 addrs;
 			__u32 count; /* in/out: kprobe_multi function count */
 			__u32 flags;
+			__u64 missed;
 		} kprobe_multi;
 		struct {
 			__u32 type; /* enum bpf_perf_event_type */
@@ -6540,6 +6570,7 @@ struct bpf_link_info {
 					__u32 name_len;
 					__u32 offset; /* offset from func_name */
 					__u64 addr;
+					__u64 missed;
 				} kprobe; /* BPF_PERF_EVENT_KPROBE, BPF_PERF_EVENT_KRETPROBE */
 				struct {
 					__aligned_u64 tp_name;   /* in/out */
@@ -6555,6 +6586,10 @@ struct bpf_link_info {
 			__u32 ifindex;
 			__u32 attach_type;
 		} tcx;
+		struct {
+			__u32 ifindex;
+			__u32 attach_type;
+		} netkit;
 	};
 } __attribute__((aligned(8)));
 
@@ -6953,6 +6988,7 @@ enum {
 	BPF_FIB_LOOKUP_OUTPUT  = (1U << 1),
 	BPF_FIB_LOOKUP_SKIP_NEIGH = (1U << 2),
 	BPF_FIB_LOOKUP_TBID    = (1U << 3),
+	BPF_FIB_LOOKUP_SRC     = (1U << 4),
 };
 
 enum {
@@ -6965,6 +7001,7 @@ enum {
 	BPF_FIB_LKUP_RET_UNSUPP_LWT,   /* fwd requires encapsulation */
 	BPF_FIB_LKUP_RET_NO_NEIGH,     /* no neighbor entry for nh */
 	BPF_FIB_LKUP_RET_FRAG_NEEDED,  /* fragmentation required to fwd */
+	BPF_FIB_LKUP_RET_NO_SRC_ADDR,  /* failed to derive IP src addr */
 };
 
 struct bpf_fib_lookup {
@@ -6999,6 +7036,9 @@ struct bpf_fib_lookup {
 		__u32	rt_metric;
 	};
 
+	/* input: source address to consider for lookup
+	 * output: source address result from lookup
+	 */
 	union {
 		__be32		ipv4_src;
 		__u32		ipv6_src[4];  /* in6_addr; network order */
@@ -7300,9 +7340,11 @@ struct bpf_core_relo {
  * Flags to control bpf_timer_start() behaviour.
  *     - BPF_F_TIMER_ABS: Timeout passed is absolute time, by default it is
  *       relative to current time.
+ *     - BPF_F_TIMER_CPU_PIN: Timer will be pinned to the CPU of the caller.
  */
 enum {
 	BPF_F_TIMER_ABS = (1ULL << 0),
+	BPF_F_TIMER_CPU_PIN = (1ULL << 1),
 };
 
 /* BPF numbers iterator state */
diff --git a/include/uapi/linux/devlink.h b/include/uapi/linux/devlink.h
index 03875e078be8..b3c8383d342d 100644
--- a/include/uapi/linux/devlink.h
+++ b/include/uapi/linux/devlink.h
@@ -265,7 +265,7 @@ enum {
  * Documentation/networking/devlink/devlink-flash.rst
  *
  */
-enum {
+enum devlink_flash_overwrite {
 	DEVLINK_FLASH_OVERWRITE_SETTINGS_BIT,
 	DEVLINK_FLASH_OVERWRITE_IDENTIFIERS_BIT,
 
@@ -680,6 +680,7 @@ enum devlink_port_function_attr {
 	DEVLINK_PORT_FN_ATTR_STATE,	/* u8 */
 	DEVLINK_PORT_FN_ATTR_OPSTATE,	/* u8 */
 	DEVLINK_PORT_FN_ATTR_CAPS,	/* bitfield32 */
+	DEVLINK_PORT_FN_ATTR_DEVLINK,	/* nested */
 
 	__DEVLINK_PORT_FUNCTION_ATTR_MAX,
 	DEVLINK_PORT_FUNCTION_ATTR_MAX = __DEVLINK_PORT_FUNCTION_ATTR_MAX - 1
diff --git a/include/uapi/linux/dpll.h b/include/uapi/linux/dpll.h
new file mode 100644
index 000000000000..715a491d2727
--- /dev/null
+++ b/include/uapi/linux/dpll.h
@@ -0,0 +1,207 @@
+/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */
+/* Do not edit directly, auto-generated from: */
+/*	Documentation/netlink/specs/dpll.yaml */
+/* YNL-GEN uapi header */
+
+#ifndef _UAPI_LINUX_DPLL_H
+#define _UAPI_LINUX_DPLL_H
+
+#define DPLL_FAMILY_NAME	"dpll"
+#define DPLL_FAMILY_VERSION	1
+
+/**
+ * enum dpll_mode - working modes a dpll can support, differentiates if and how
+ *   dpll selects one of its inputs to syntonize with it, valid values for
+ *   DPLL_A_MODE attribute
+ * @DPLL_MODE_MANUAL: input can be only selected by sending a request to dpll
+ * @DPLL_MODE_AUTOMATIC: highest prio input pin auto selected by dpll
+ */
+enum dpll_mode {
+	DPLL_MODE_MANUAL = 1,
+	DPLL_MODE_AUTOMATIC,
+
+	/* private: */
+	__DPLL_MODE_MAX,
+	DPLL_MODE_MAX = (__DPLL_MODE_MAX - 1)
+};
+
+/**
+ * enum dpll_lock_status - provides information of dpll device lock status,
+ *   valid values for DPLL_A_LOCK_STATUS attribute
+ * @DPLL_LOCK_STATUS_UNLOCKED: dpll was not yet locked to any valid input (or
+ *   forced by setting DPLL_A_MODE to DPLL_MODE_DETACHED)
+ * @DPLL_LOCK_STATUS_LOCKED: dpll is locked to a valid signal, but no holdover
+ *   available
+ * @DPLL_LOCK_STATUS_LOCKED_HO_ACQ: dpll is locked and holdover acquired
+ * @DPLL_LOCK_STATUS_HOLDOVER: dpll is in holdover state - lost a valid lock or
+ *   was forced by disconnecting all the pins (latter possible only when dpll
+ *   lock-state was already DPLL_LOCK_STATUS_LOCKED_HO_ACQ, if dpll lock-state
+ *   was not DPLL_LOCK_STATUS_LOCKED_HO_ACQ, the dpll's lock-state shall remain
+ *   DPLL_LOCK_STATUS_UNLOCKED)
+ */
+enum dpll_lock_status {
+	DPLL_LOCK_STATUS_UNLOCKED = 1,
+	DPLL_LOCK_STATUS_LOCKED,
+	DPLL_LOCK_STATUS_LOCKED_HO_ACQ,
+	DPLL_LOCK_STATUS_HOLDOVER,
+
+	/* private: */
+	__DPLL_LOCK_STATUS_MAX,
+	DPLL_LOCK_STATUS_MAX = (__DPLL_LOCK_STATUS_MAX - 1)
+};
+
+#define DPLL_TEMP_DIVIDER	1000
+
+/**
+ * enum dpll_type - type of dpll, valid values for DPLL_A_TYPE attribute
+ * @DPLL_TYPE_PPS: dpll produces Pulse-Per-Second signal
+ * @DPLL_TYPE_EEC: dpll drives the Ethernet Equipment Clock
+ */
+enum dpll_type {
+	DPLL_TYPE_PPS = 1,
+	DPLL_TYPE_EEC,
+
+	/* private: */
+	__DPLL_TYPE_MAX,
+	DPLL_TYPE_MAX = (__DPLL_TYPE_MAX - 1)
+};
+
+/**
+ * enum dpll_pin_type - defines possible types of a pin, valid values for
+ *   DPLL_A_PIN_TYPE attribute
+ * @DPLL_PIN_TYPE_MUX: aggregates another layer of selectable pins
+ * @DPLL_PIN_TYPE_EXT: external input
+ * @DPLL_PIN_TYPE_SYNCE_ETH_PORT: ethernet port PHY's recovered clock
+ * @DPLL_PIN_TYPE_INT_OSCILLATOR: device internal oscillator
+ * @DPLL_PIN_TYPE_GNSS: GNSS recovered clock
+ */
+enum dpll_pin_type {
+	DPLL_PIN_TYPE_MUX = 1,
+	DPLL_PIN_TYPE_EXT,
+	DPLL_PIN_TYPE_SYNCE_ETH_PORT,
+	DPLL_PIN_TYPE_INT_OSCILLATOR,
+	DPLL_PIN_TYPE_GNSS,
+
+	/* private: */
+	__DPLL_PIN_TYPE_MAX,
+	DPLL_PIN_TYPE_MAX = (__DPLL_PIN_TYPE_MAX - 1)
+};
+
+/**
+ * enum dpll_pin_direction - defines possible direction of a pin, valid values
+ *   for DPLL_A_PIN_DIRECTION attribute
+ * @DPLL_PIN_DIRECTION_INPUT: pin used as a input of a signal
+ * @DPLL_PIN_DIRECTION_OUTPUT: pin used to output the signal
+ */
+enum dpll_pin_direction {
+	DPLL_PIN_DIRECTION_INPUT = 1,
+	DPLL_PIN_DIRECTION_OUTPUT,
+
+	/* private: */
+	__DPLL_PIN_DIRECTION_MAX,
+	DPLL_PIN_DIRECTION_MAX = (__DPLL_PIN_DIRECTION_MAX - 1)
+};
+
+#define DPLL_PIN_FREQUENCY_1_HZ		1
+#define DPLL_PIN_FREQUENCY_10_KHZ	10000
+#define DPLL_PIN_FREQUENCY_77_5_KHZ	77500
+#define DPLL_PIN_FREQUENCY_10_MHZ	10000000
+
+/**
+ * enum dpll_pin_state - defines possible states of a pin, valid values for
+ *   DPLL_A_PIN_STATE attribute
+ * @DPLL_PIN_STATE_CONNECTED: pin connected, active input of phase locked loop
+ * @DPLL_PIN_STATE_DISCONNECTED: pin disconnected, not considered as a valid
+ *   input
+ * @DPLL_PIN_STATE_SELECTABLE: pin enabled for automatic input selection
+ */
+enum dpll_pin_state {
+	DPLL_PIN_STATE_CONNECTED = 1,
+	DPLL_PIN_STATE_DISCONNECTED,
+	DPLL_PIN_STATE_SELECTABLE,
+
+	/* private: */
+	__DPLL_PIN_STATE_MAX,
+	DPLL_PIN_STATE_MAX = (__DPLL_PIN_STATE_MAX - 1)
+};
+
+/**
+ * enum dpll_pin_capabilities - defines possible capabilities of a pin, valid
+ *   flags on DPLL_A_PIN_CAPABILITIES attribute
+ * @DPLL_PIN_CAPABILITIES_DIRECTION_CAN_CHANGE: pin direction can be changed
+ * @DPLL_PIN_CAPABILITIES_PRIORITY_CAN_CHANGE: pin priority can be changed
+ * @DPLL_PIN_CAPABILITIES_STATE_CAN_CHANGE: pin state can be changed
+ */
+enum dpll_pin_capabilities {
+	DPLL_PIN_CAPABILITIES_DIRECTION_CAN_CHANGE = 1,
+	DPLL_PIN_CAPABILITIES_PRIORITY_CAN_CHANGE = 2,
+	DPLL_PIN_CAPABILITIES_STATE_CAN_CHANGE = 4,
+};
+
+#define DPLL_PHASE_OFFSET_DIVIDER	1000
+
+enum dpll_a {
+	DPLL_A_ID = 1,
+	DPLL_A_MODULE_NAME,
+	DPLL_A_PAD,
+	DPLL_A_CLOCK_ID,
+	DPLL_A_MODE,
+	DPLL_A_MODE_SUPPORTED,
+	DPLL_A_LOCK_STATUS,
+	DPLL_A_TEMP,
+	DPLL_A_TYPE,
+
+	__DPLL_A_MAX,
+	DPLL_A_MAX = (__DPLL_A_MAX - 1)
+};
+
+enum dpll_a_pin {
+	DPLL_A_PIN_ID = 1,
+	DPLL_A_PIN_PARENT_ID,
+	DPLL_A_PIN_MODULE_NAME,
+	DPLL_A_PIN_PAD,
+	DPLL_A_PIN_CLOCK_ID,
+	DPLL_A_PIN_BOARD_LABEL,
+	DPLL_A_PIN_PANEL_LABEL,
+	DPLL_A_PIN_PACKAGE_LABEL,
+	DPLL_A_PIN_TYPE,
+	DPLL_A_PIN_DIRECTION,
+	DPLL_A_PIN_FREQUENCY,
+	DPLL_A_PIN_FREQUENCY_SUPPORTED,
+	DPLL_A_PIN_FREQUENCY_MIN,
+	DPLL_A_PIN_FREQUENCY_MAX,
+	DPLL_A_PIN_PRIO,
+	DPLL_A_PIN_STATE,
+	DPLL_A_PIN_CAPABILITIES,
+	DPLL_A_PIN_PARENT_DEVICE,
+	DPLL_A_PIN_PARENT_PIN,
+	DPLL_A_PIN_PHASE_ADJUST_MIN,
+	DPLL_A_PIN_PHASE_ADJUST_MAX,
+	DPLL_A_PIN_PHASE_ADJUST,
+	DPLL_A_PIN_PHASE_OFFSET,
+
+	__DPLL_A_PIN_MAX,
+	DPLL_A_PIN_MAX = (__DPLL_A_PIN_MAX - 1)
+};
+
+enum dpll_cmd {
+	DPLL_CMD_DEVICE_ID_GET = 1,
+	DPLL_CMD_DEVICE_GET,
+	DPLL_CMD_DEVICE_SET,
+	DPLL_CMD_DEVICE_CREATE_NTF,
+	DPLL_CMD_DEVICE_DELETE_NTF,
+	DPLL_CMD_DEVICE_CHANGE_NTF,
+	DPLL_CMD_PIN_ID_GET,
+	DPLL_CMD_PIN_GET,
+	DPLL_CMD_PIN_SET,
+	DPLL_CMD_PIN_CREATE_NTF,
+	DPLL_CMD_PIN_DELETE_NTF,
+	DPLL_CMD_PIN_CHANGE_NTF,
+
+	__DPLL_CMD_MAX,
+	DPLL_CMD_MAX = (__DPLL_CMD_MAX - 1)
+};
+
+#define DPLL_MCGRP_MONITOR	"monitor"
+
+#endif /* _UAPI_LINUX_DPLL_H */
diff --git a/include/uapi/linux/if_bridge.h b/include/uapi/linux/if_bridge.h
index f95326fce6bb..2e23f99dc0f1 100644
--- a/include/uapi/linux/if_bridge.h
+++ b/include/uapi/linux/if_bridge.h
@@ -723,6 +723,24 @@ enum {
 };
 #define MDBA_SET_ENTRY_MAX (__MDBA_SET_ENTRY_MAX - 1)
 
+/* [MDBA_GET_ENTRY] = {
+ *    struct br_mdb_entry
+ *    [MDBA_GET_ENTRY_ATTRS] = {
+ *       [MDBE_ATTR_SOURCE]
+ *          struct in_addr / struct in6_addr
+ *       [MDBE_ATTR_SRC_VNI]
+ *          u32
+ *    }
+ * }
+ */
+enum {
+	MDBA_GET_ENTRY_UNSPEC,
+	MDBA_GET_ENTRY,
+	MDBA_GET_ENTRY_ATTRS,
+	__MDBA_GET_ENTRY_MAX,
+};
+#define MDBA_GET_ENTRY_MAX (__MDBA_GET_ENTRY_MAX - 1)
+
 /* [MDBA_SET_ENTRY_ATTRS] = {
  *    [MDBE_ATTR_xxx]
  *    ...
diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h
index ce3117df9cec..29ff80da2775 100644
--- a/include/uapi/linux/if_link.h
+++ b/include/uapi/linux/if_link.h
@@ -376,7 +376,7 @@ enum {
 
 	IFLA_GSO_IPV4_MAX_SIZE,
 	IFLA_GRO_IPV4_MAX_SIZE,
-
+	IFLA_DPLL_PIN,
 	__IFLA_MAX
 };
 
@@ -510,6 +510,8 @@ enum {
 	IFLA_BR_VLAN_STATS_PER_PORT,
 	IFLA_BR_MULTI_BOOLOPT,
 	IFLA_BR_MCAST_QUERIER_STATE,
+	IFLA_BR_FDB_N_LEARNED,
+	IFLA_BR_FDB_MAX_LEARNED,
 	__IFLA_BR_MAX,
 };
 
@@ -756,6 +758,30 @@ struct tunnel_msg {
 	__u32 ifindex;
 };
 
+/* netkit section */
+enum netkit_action {
+	NETKIT_NEXT	= -1,
+	NETKIT_PASS	= 0,
+	NETKIT_DROP	= 2,
+	NETKIT_REDIRECT	= 7,
+};
+
+enum netkit_mode {
+	NETKIT_L2,
+	NETKIT_L3,
+};
+
+enum {
+	IFLA_NETKIT_UNSPEC,
+	IFLA_NETKIT_PEER_INFO,
+	IFLA_NETKIT_PRIMARY,
+	IFLA_NETKIT_POLICY,
+	IFLA_NETKIT_PEER_POLICY,
+	IFLA_NETKIT_MODE,
+	__IFLA_NETKIT_MAX,
+};
+#define IFLA_NETKIT_MAX	(__IFLA_NETKIT_MAX - 1)
+
 /* VXLAN section */
 
 /* include statistics in the dump */
@@ -1392,7 +1418,9 @@ enum {
 
 enum {
 	IFLA_DSA_UNSPEC,
-	IFLA_DSA_MASTER,
+	IFLA_DSA_CONDUIT,
+	/* Deprecated, use IFLA_DSA_CONDUIT instead */
+	IFLA_DSA_MASTER = IFLA_DSA_CONDUIT,
 	__IFLA_DSA_MAX,
 };
 
diff --git a/include/uapi/linux/mptcp.h b/include/uapi/linux/mptcp.h
index ee9c49f949a2..a6451561f3f8 100644
--- a/include/uapi/linux/mptcp.h
+++ b/include/uapi/linux/mptcp.h
@@ -23,91 +23,20 @@
 #define MPTCP_SUBFLOW_FLAG_CONNECTED		_BITUL(7)
 #define MPTCP_SUBFLOW_FLAG_MAPVALID		_BITUL(8)
 
-enum {
-	MPTCP_SUBFLOW_ATTR_UNSPEC,
-	MPTCP_SUBFLOW_ATTR_TOKEN_REM,
-	MPTCP_SUBFLOW_ATTR_TOKEN_LOC,
-	MPTCP_SUBFLOW_ATTR_RELWRITE_SEQ,
-	MPTCP_SUBFLOW_ATTR_MAP_SEQ,
-	MPTCP_SUBFLOW_ATTR_MAP_SFSEQ,
-	MPTCP_SUBFLOW_ATTR_SSN_OFFSET,
-	MPTCP_SUBFLOW_ATTR_MAP_DATALEN,
-	MPTCP_SUBFLOW_ATTR_FLAGS,
-	MPTCP_SUBFLOW_ATTR_ID_REM,
-	MPTCP_SUBFLOW_ATTR_ID_LOC,
-	MPTCP_SUBFLOW_ATTR_PAD,
-	__MPTCP_SUBFLOW_ATTR_MAX
-};
-
-#define MPTCP_SUBFLOW_ATTR_MAX (__MPTCP_SUBFLOW_ATTR_MAX - 1)
-
-/* netlink interface */
-#define MPTCP_PM_NAME		"mptcp_pm"
 #define MPTCP_PM_CMD_GRP_NAME	"mptcp_pm_cmds"
 #define MPTCP_PM_EV_GRP_NAME	"mptcp_pm_events"
-#define MPTCP_PM_VER		0x1
-
-/*
- * ATTR types defined for MPTCP
- */
-enum {
-	MPTCP_PM_ATTR_UNSPEC,
-
-	MPTCP_PM_ATTR_ADDR,				/* nested address */
-	MPTCP_PM_ATTR_RCV_ADD_ADDRS,			/* u32 */
-	MPTCP_PM_ATTR_SUBFLOWS,				/* u32 */
-	MPTCP_PM_ATTR_TOKEN,				/* u32 */
-	MPTCP_PM_ATTR_LOC_ID,				/* u8 */
-	MPTCP_PM_ATTR_ADDR_REMOTE,			/* nested address */
-
-	__MPTCP_PM_ATTR_MAX
-};
-
-#define MPTCP_PM_ATTR_MAX (__MPTCP_PM_ATTR_MAX - 1)
-
-enum {
-	MPTCP_PM_ADDR_ATTR_UNSPEC,
-
-	MPTCP_PM_ADDR_ATTR_FAMILY,			/* u16 */
-	MPTCP_PM_ADDR_ATTR_ID,				/* u8 */
-	MPTCP_PM_ADDR_ATTR_ADDR4,			/* struct in_addr */
-	MPTCP_PM_ADDR_ATTR_ADDR6,			/* struct in6_addr */
-	MPTCP_PM_ADDR_ATTR_PORT,			/* u16 */
-	MPTCP_PM_ADDR_ATTR_FLAGS,			/* u32 */
-	MPTCP_PM_ADDR_ATTR_IF_IDX,			/* s32 */
-
-	__MPTCP_PM_ADDR_ATTR_MAX
-};
-
-#define MPTCP_PM_ADDR_ATTR_MAX (__MPTCP_PM_ADDR_ATTR_MAX - 1)
-
-#define MPTCP_PM_ADDR_FLAG_SIGNAL			(1 << 0)
-#define MPTCP_PM_ADDR_FLAG_SUBFLOW			(1 << 1)
-#define MPTCP_PM_ADDR_FLAG_BACKUP			(1 << 2)
-#define MPTCP_PM_ADDR_FLAG_FULLMESH			(1 << 3)
-#define MPTCP_PM_ADDR_FLAG_IMPLICIT			(1 << 4)
-
-enum {
-	MPTCP_PM_CMD_UNSPEC,
 
-	MPTCP_PM_CMD_ADD_ADDR,
-	MPTCP_PM_CMD_DEL_ADDR,
-	MPTCP_PM_CMD_GET_ADDR,
-	MPTCP_PM_CMD_FLUSH_ADDRS,
-	MPTCP_PM_CMD_SET_LIMITS,
-	MPTCP_PM_CMD_GET_LIMITS,
-	MPTCP_PM_CMD_SET_FLAGS,
-	MPTCP_PM_CMD_ANNOUNCE,
-	MPTCP_PM_CMD_REMOVE,
-	MPTCP_PM_CMD_SUBFLOW_CREATE,
-	MPTCP_PM_CMD_SUBFLOW_DESTROY,
-
-	__MPTCP_PM_CMD_AFTER_LAST
-};
+#include <linux/mptcp_pm.h>
 
 #define MPTCP_INFO_FLAG_FALLBACK		_BITUL(0)
 #define MPTCP_INFO_FLAG_REMOTE_KEY_RECEIVED	_BITUL(1)
 
+#define MPTCP_PM_ADDR_FLAG_SIGNAL                      (1 << 0)
+#define MPTCP_PM_ADDR_FLAG_SUBFLOW                     (1 << 1)
+#define MPTCP_PM_ADDR_FLAG_BACKUP                      (1 << 2)
+#define MPTCP_PM_ADDR_FLAG_FULLMESH                    (1 << 3)
+#define MPTCP_PM_ADDR_FLAG_IMPLICIT                    (1 << 4)
+
 struct mptcp_info {
 	__u8	mptcpi_subflows;
 	__u8	mptcpi_add_addr_signal;
@@ -130,93 +59,6 @@ struct mptcp_info {
 	__u64	mptcpi_bytes_acked;
 };
 
-/*
- * MPTCP_EVENT_CREATED: token, family, saddr4 | saddr6, daddr4 | daddr6,
- *                      sport, dport
- * A new MPTCP connection has been created. It is the good time to allocate
- * memory and send ADD_ADDR if needed. Depending on the traffic-patterns
- * it can take a long time until the MPTCP_EVENT_ESTABLISHED is sent.
- *
- * MPTCP_EVENT_ESTABLISHED: token, family, saddr4 | saddr6, daddr4 | daddr6,
- *			    sport, dport
- * A MPTCP connection is established (can start new subflows).
- *
- * MPTCP_EVENT_CLOSED: token
- * A MPTCP connection has stopped.
- *
- * MPTCP_EVENT_ANNOUNCED: token, rem_id, family, daddr4 | daddr6 [, dport]
- * A new address has been announced by the peer.
- *
- * MPTCP_EVENT_REMOVED: token, rem_id
- * An address has been lost by the peer.
- *
- * MPTCP_EVENT_SUB_ESTABLISHED: token, family, loc_id, rem_id,
- *                              saddr4 | saddr6, daddr4 | daddr6, sport,
- *                              dport, backup, if_idx [, error]
- * A new subflow has been established. 'error' should not be set.
- *
- * MPTCP_EVENT_SUB_CLOSED: token, family, loc_id, rem_id, saddr4 | saddr6,
- *                         daddr4 | daddr6, sport, dport, backup, if_idx
- *                         [, error]
- * A subflow has been closed. An error (copy of sk_err) could be set if an
- * error has been detected for this subflow.
- *
- * MPTCP_EVENT_SUB_PRIORITY: token, family, loc_id, rem_id, saddr4 | saddr6,
- *                           daddr4 | daddr6, sport, dport, backup, if_idx
- *                           [, error]
- * The priority of a subflow has changed. 'error' should not be set.
- *
- * MPTCP_EVENT_LISTENER_CREATED: family, sport, saddr4 | saddr6
- * A new PM listener is created.
- *
- * MPTCP_EVENT_LISTENER_CLOSED: family, sport, saddr4 | saddr6
- * A PM listener is closed.
- */
-enum mptcp_event_type {
-	MPTCP_EVENT_UNSPEC = 0,
-	MPTCP_EVENT_CREATED = 1,
-	MPTCP_EVENT_ESTABLISHED = 2,
-	MPTCP_EVENT_CLOSED = 3,
-
-	MPTCP_EVENT_ANNOUNCED = 6,
-	MPTCP_EVENT_REMOVED = 7,
-
-	MPTCP_EVENT_SUB_ESTABLISHED = 10,
-	MPTCP_EVENT_SUB_CLOSED = 11,
-
-	MPTCP_EVENT_SUB_PRIORITY = 13,
-
-	MPTCP_EVENT_LISTENER_CREATED = 15,
-	MPTCP_EVENT_LISTENER_CLOSED = 16,
-};
-
-enum mptcp_event_attr {
-	MPTCP_ATTR_UNSPEC = 0,
-
-	MPTCP_ATTR_TOKEN,	/* u32 */
-	MPTCP_ATTR_FAMILY,	/* u16 */
-	MPTCP_ATTR_LOC_ID,	/* u8 */
-	MPTCP_ATTR_REM_ID,	/* u8 */
-	MPTCP_ATTR_SADDR4,	/* be32 */
-	MPTCP_ATTR_SADDR6,	/* struct in6_addr */
-	MPTCP_ATTR_DADDR4,	/* be32 */
-	MPTCP_ATTR_DADDR6,	/* struct in6_addr */
-	MPTCP_ATTR_SPORT,	/* be16 */
-	MPTCP_ATTR_DPORT,	/* be16 */
-	MPTCP_ATTR_BACKUP,	/* u8 */
-	MPTCP_ATTR_ERROR,	/* u8 */
-	MPTCP_ATTR_FLAGS,	/* u16 */
-	MPTCP_ATTR_TIMEOUT,	/* u32 */
-	MPTCP_ATTR_IF_IDX,	/* s32 */
-	MPTCP_ATTR_RESET_REASON,/* u32 */
-	MPTCP_ATTR_RESET_FLAGS, /* u32 */
-	MPTCP_ATTR_SERVER_SIDE,	/* u8 */
-
-	__MPTCP_ATTR_AFTER_LAST
-};
-
-#define MPTCP_ATTR_MAX (__MPTCP_ATTR_AFTER_LAST - 1)
-
 /* MPTCP Reset reason codes, rfc8684 */
 #define MPTCP_RST_EUNSPEC	0
 #define MPTCP_RST_EMPTCP	1
diff --git a/include/uapi/linux/mptcp_pm.h b/include/uapi/linux/mptcp_pm.h
new file mode 100644
index 000000000000..b5d11aece408
--- /dev/null
+++ b/include/uapi/linux/mptcp_pm.h
@@ -0,0 +1,150 @@
+/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */
+/* Do not edit directly, auto-generated from: */
+/*	Documentation/netlink/specs/mptcp.yaml */
+/* YNL-GEN uapi header */
+
+#ifndef _UAPI_LINUX_MPTCP_PM_H
+#define _UAPI_LINUX_MPTCP_PM_H
+
+#define MPTCP_PM_NAME	"mptcp_pm"
+#define MPTCP_PM_VER	1
+
+/**
+ * enum mptcp_event_type
+ * @MPTCP_EVENT_UNSPEC: unused event
+ * @MPTCP_EVENT_CREATED: token, family, saddr4 | saddr6, daddr4 | daddr6,
+ *   sport, dport A new MPTCP connection has been created. It is the good time
+ *   to allocate memory and send ADD_ADDR if needed. Depending on the
+ *   traffic-patterns it can take a long time until the MPTCP_EVENT_ESTABLISHED
+ *   is sent.
+ * @MPTCP_EVENT_ESTABLISHED: token, family, saddr4 | saddr6, daddr4 | daddr6,
+ *   sport, dport A MPTCP connection is established (can start new subflows).
+ * @MPTCP_EVENT_CLOSED: token A MPTCP connection has stopped.
+ * @MPTCP_EVENT_ANNOUNCED: token, rem_id, family, daddr4 | daddr6 [, dport] A
+ *   new address has been announced by the peer.
+ * @MPTCP_EVENT_REMOVED: token, rem_id An address has been lost by the peer.
+ * @MPTCP_EVENT_SUB_ESTABLISHED: token, family, loc_id, rem_id, saddr4 |
+ *   saddr6, daddr4 | daddr6, sport, dport, backup, if_idx [, error] A new
+ *   subflow has been established. 'error' should not be set.
+ * @MPTCP_EVENT_SUB_CLOSED: token, family, loc_id, rem_id, saddr4 | saddr6,
+ *   daddr4 | daddr6, sport, dport, backup, if_idx [, error] A subflow has been
+ *   closed. An error (copy of sk_err) could be set if an error has been
+ *   detected for this subflow.
+ * @MPTCP_EVENT_SUB_PRIORITY: token, family, loc_id, rem_id, saddr4 | saddr6,
+ *   daddr4 | daddr6, sport, dport, backup, if_idx [, error] The priority of a
+ *   subflow has changed. 'error' should not be set.
+ * @MPTCP_EVENT_LISTENER_CREATED: family, sport, saddr4 | saddr6 A new PM
+ *   listener is created.
+ * @MPTCP_EVENT_LISTENER_CLOSED: family, sport, saddr4 | saddr6 A PM listener
+ *   is closed.
+ */
+enum mptcp_event_type {
+	MPTCP_EVENT_UNSPEC,
+	MPTCP_EVENT_CREATED,
+	MPTCP_EVENT_ESTABLISHED,
+	MPTCP_EVENT_CLOSED,
+	MPTCP_EVENT_ANNOUNCED = 6,
+	MPTCP_EVENT_REMOVED,
+	MPTCP_EVENT_SUB_ESTABLISHED = 10,
+	MPTCP_EVENT_SUB_CLOSED,
+	MPTCP_EVENT_SUB_PRIORITY = 13,
+	MPTCP_EVENT_LISTENER_CREATED = 15,
+	MPTCP_EVENT_LISTENER_CLOSED,
+};
+
+enum {
+	MPTCP_PM_ADDR_ATTR_UNSPEC,
+	MPTCP_PM_ADDR_ATTR_FAMILY,
+	MPTCP_PM_ADDR_ATTR_ID,
+	MPTCP_PM_ADDR_ATTR_ADDR4,
+	MPTCP_PM_ADDR_ATTR_ADDR6,
+	MPTCP_PM_ADDR_ATTR_PORT,
+	MPTCP_PM_ADDR_ATTR_FLAGS,
+	MPTCP_PM_ADDR_ATTR_IF_IDX,
+
+	__MPTCP_PM_ADDR_ATTR_MAX
+};
+#define MPTCP_PM_ADDR_ATTR_MAX (__MPTCP_PM_ADDR_ATTR_MAX - 1)
+
+enum {
+	MPTCP