Merge x86/urgent into x86/fpu

Pick up dependent changes which either went mainline (x86/urgent is
based on -rc7 and that contains them) as urgent fixes and the current
x86/urgent branch which contains two more urgent fixes, so that the
bigger FPU rework can base off ontop.

Signed-off-by: Borislav Petkov <bp@suse.de>

75 files changed, 467 insertions, 157 deletions

diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index 40a9c101565e..17325416e2de 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -960,6 +960,7 @@
 #ifdef CONFIG_AMD_MEM_ENCRYPT
 #define PERCPU_DECRYPTED_SECTION					\
 	. = ALIGN(PAGE_SIZE);						\
+	*(.data..decrypted)						\
 	*(.data..percpu..decrypted)					\
 	. = ALIGN(PAGE_SIZE);
 #else
diff --git a/include/dt-bindings/usb/pd.h b/include/dt-bindings/usb/pd.h
index fef3ef65967f..e6526b138174 100644
--- a/include/dt-bindings/usb/pd.h
+++ b/include/dt-bindings/usb/pd.h
@@ -106,6 +106,10 @@
  * <20:16>  :: Reserved, Shall be set to zero
  * <15:0>   :: USB-IF assigned VID for this cable vendor
  */
+
+/* PD Rev2.0 definition */
+#define IDH_PTYPE_UNDEF		0
+
 /* SOP Product Type (UFP) */
 #define IDH_PTYPE_NOT_UFP       0
 #define IDH_PTYPE_HUB           1
@@ -163,10 +167,10 @@
 #define UFP_VDO_VER1_2		2
 
 /* Device Capability */
-#define DEV_USB2_CAPABLE	BIT(0)
-#define DEV_USB2_BILLBOARD	BIT(1)
-#define DEV_USB3_CAPABLE	BIT(2)
-#define DEV_USB4_CAPABLE	BIT(3)
+#define DEV_USB2_CAPABLE	(1 << 0)
+#define DEV_USB2_BILLBOARD	(1 << 1)
+#define DEV_USB3_CAPABLE	(1 << 2)
+#define DEV_USB4_CAPABLE	(1 << 3)
 
 /* Connector Type */
 #define UFP_RECEPTACLE		2
@@ -191,9 +195,9 @@
 
 /* Alternate Modes */
 #define UFP_ALTMODE_NOT_SUPP	0
-#define UFP_ALTMODE_TBT3	BIT(0)
-#define UFP_ALTMODE_RECFG	BIT(1)
-#define UFP_ALTMODE_NO_RECFG	BIT(2)
+#define UFP_ALTMODE_TBT3	(1 << 0)
+#define UFP_ALTMODE_RECFG	(1 << 1)
+#define UFP_ALTMODE_NO_RECFG	(1 << 2)
 
 /* USB Highest Speed */
 #define UFP_USB2_ONLY		0
@@ -217,9 +221,9 @@
  * <4:0>   :: Port number
  */
 #define DFP_VDO_VER1_1		1
-#define HOST_USB2_CAPABLE	BIT(0)
-#define HOST_USB3_CAPABLE	BIT(1)
-#define HOST_USB4_CAPABLE	BIT(2)
+#define HOST_USB2_CAPABLE	(1 << 0)
+#define HOST_USB3_CAPABLE	(1 << 1)
+#define HOST_USB4_CAPABLE	(1 << 2)
 #define DFP_RECEPTACLE		2
 #define DFP_CAPTIVE		3
 
@@ -228,7 +232,25 @@
 	 | ((pnum) & 0x1f))
 
 /*
- * Passive Cable VDO
+ * Cable VDO (for both Passive and Active Cable VDO in PD Rev2.0)
+ * ---------
+ * <31:28> :: Cable HW version
+ * <27:24> :: Cable FW version
+ * <23:20> :: Reserved, Shall be set to zero
+ * <19:18> :: type-C to Type-A/B/C/Captive (00b == A, 01 == B, 10 == C, 11 == Captive)
+ * <17>    :: Reserved, Shall be set to zero
+ * <16:13> :: cable latency (0001 == <10ns(~1m length))
+ * <12:11> :: cable termination type (11b == both ends active VCONN req)
+ * <10>    :: SSTX1 Directionality support (0b == fixed, 1b == cfgable)
+ * <9>     :: SSTX2 Directionality support
+ * <8>     :: SSRX1 Directionality support
+ * <7>     :: SSRX2 Directionality support
+ * <6:5>   :: Vbus current handling capability (01b == 3A, 10b == 5A)
+ * <4>     :: Vbus through cable (0b == no, 1b == yes)
+ * <3>     :: SOP" controller present? (0b == no, 1b == yes)
+ * <2:0>   :: USB SS Signaling support
+ *
+ * Passive Cable VDO (PD Rev3.0+)
  * ---------
  * <31:28> :: Cable HW version
  * <27:24> :: Cable FW version
@@ -244,7 +266,7 @@
  * <4:3>   :: Reserved, Shall be set to zero
  * <2:0>   :: USB highest speed
  *
- * Active Cable VDO 1
+ * Active Cable VDO 1 (PD Rev3.0+)
  * ---------
  * <31:28> :: Cable HW version
  * <27:24> :: Cable FW version
@@ -266,7 +288,9 @@
 #define CABLE_VDO_VER1_0	0
 #define CABLE_VDO_VER1_3	3
 
-/* Connector Type */
+/* Connector Type (_ATYPE and _BTYPE are for PD Rev2.0 only) */
+#define CABLE_ATYPE		0
+#define CABLE_BTYPE		1
 #define CABLE_CTYPE		2
 #define CABLE_CAPTIVE		3
 
@@ -303,12 +327,22 @@
 #define CABLE_CURR_3A		1
 #define CABLE_CURR_5A		2
 
+/* USB SuperSpeed Signaling Support (PD Rev2.0) */
+#define CABLE_USBSS_U2_ONLY	0
+#define CABLE_USBSS_U31_GEN1	1
+#define CABLE_USBSS_U31_GEN2	2
+
 /* USB Highest Speed */
 #define CABLE_USB2_ONLY		0
 #define CABLE_USB32_GEN1	1
 #define CABLE_USB32_4_GEN2	2
 #define CABLE_USB4_GEN3		3
 
+#define VDO_CABLE(hw, fw, cbl, lat, term, tx1d, tx2d, rx1d, rx2d, cur, vps, sopp, usbss) \
+	(((hw) & 0x7) << 28 | ((fw) & 0x7) << 24 | ((cbl) & 0x3) << 18		\
+	 | ((lat) & 0x7) << 13 | ((term) & 0x3) << 11 | (tx1d) << 10		\
+	 | (tx2d) << 9 | (rx1d) << 8 | (rx2d) << 7 | ((cur) & 0x3) << 5		\
+	 | (vps) << 4 | (sopp) << 3 | ((usbss) & 0x7))
 #define VDO_PCABLE(hw, fw, ver, conn, lat, term, vbm, cur, spd)			\
 	(((hw) & 0xf) << 28 | ((fw) & 0xf) << 24 | ((ver) & 0x7) << 21		\
 	 | ((conn) & 0x3) << 18 | ((lat) & 0xf) << 13 | ((term) & 0x3) << 11	\
@@ -374,6 +408,35 @@
 	 | (iso) << 2 | (gen))
 
 /*
+ * AMA VDO (PD Rev2.0)
+ * ---------
+ * <31:28> :: Cable HW version
+ * <27:24> :: Cable FW version
+ * <23:12> :: Reserved, Shall be set to zero
+ * <11>    :: SSTX1 Directionality support (0b == fixed, 1b == cfgable)
+ * <10>    :: SSTX2 Directionality support
+ * <9>     :: SSRX1 Directionality support
+ * <8>     :: SSRX2 Directionality support
+ * <7:5>   :: Vconn power
+ * <4>     :: Vconn power required
+ * <3>     :: Vbus power required
+ * <2:0>   :: USB SS Signaling support
+ */
+#define VDO_AMA(hw, fw, tx1d, tx2d, rx1d, rx2d, vcpwr, vcr, vbr, usbss) \
+	(((hw) & 0x7) << 28 | ((fw) & 0x7) << 24			\
+	 | (tx1d) << 11 | (tx2d) << 10 | (rx1d) << 9 | (rx2d) << 8	\
+	 | ((vcpwr) & 0x7) << 5 | (vcr) << 4 | (vbr) << 3		\
+	 | ((usbss) & 0x7))
+
+#define PD_VDO_AMA_VCONN_REQ(vdo)	(((vdo) >> 4) & 1)
+#define PD_VDO_AMA_VBUS_REQ(vdo)	(((vdo) >> 3) & 1)
+
+#define AMA_USBSS_U2_ONLY	0
+#define AMA_USBSS_U31_GEN1	1
+#define AMA_USBSS_U31_GEN2	2
+#define AMA_USBSS_BBONLY	3
+
+/*
  * VPD VDO
  * ---------
  * <31:28> :: HW version
diff --git a/include/linux/arch_topology.h b/include/linux/arch_topology.h
index f180240dc95f..11e555cfaecb 100644
--- a/include/linux/arch_topology.h
+++ b/include/linux/arch_topology.h
@@ -37,7 +37,6 @@ bool topology_scale_freq_invariant(void);
 enum scale_freq_source {
 	SCALE_FREQ_SOURCE_CPUFREQ = 0,
 	SCALE_FREQ_SOURCE_ARCH,
-	SCALE_FREQ_SOURCE_CPPC,
 };
 
 struct scale_freq_data {
diff --git a/include/linux/avf/virtchnl.h b/include/linux/avf/virtchnl.h
index 565deea6ffe8..8612f8fc86c1 100644
--- a/include/linux/avf/virtchnl.h
+++ b/include/linux/avf/virtchnl.h
@@ -830,6 +830,7 @@ VIRTCHNL_CHECK_STRUCT_LEN(72, virtchnl_proto_hdr);
 
 struct virtchnl_proto_hdrs {
 	u8 tunnel_level;
+	u8 pad[3];
 	/**
 	 * specify where protocol header start from.
 	 * 0 - from the outer layer
diff --git a/include/linux/bits.h b/include/linux/bits.h
index 7f475d59a097..87d112650dfb 100644
--- a/include/linux/bits.h
+++ b/include/linux/bits.h
@@ -22,7 +22,7 @@
 #include <linux/build_bug.h>
 #define GENMASK_INPUT_CHECK(h, l) \
 	(BUILD_BUG_ON_ZERO(__builtin_choose_expr( \
-		__builtin_constant_p((l) > (h)), (l) > (h), 0)))
+		__is_constexpr((l) > (h)), (l) > (h), 0)))
 #else
 /*
  * BUILD_BUG_ON_ZERO is not available in h files included from asm files,
diff --git a/include/linux/cgroup-defs.h b/include/linux/cgroup-defs.h
index 559ee05f86b2..fb8f6d2cd104 100644
--- a/include/linux/cgroup-defs.h
+++ b/include/linux/cgroup-defs.h
@@ -232,7 +232,7 @@ struct css_set {
 	struct list_head task_iters;
 
 	/*
-	 * On the default hierarhcy, ->subsys[ssid] may point to a css
+	 * On the default hierarchy, ->subsys[ssid] may point to a css
 	 * attached to an ancestor instead of the cgroup this css_set is
 	 * associated with.  The following node is anchored at
 	 * ->subsys[ssid]->cgroup->e_csets[ssid] and provides a way to
@@ -668,7 +668,7 @@ struct cgroup_subsys {
 	 */
 	bool threaded:1;
 
-	/* the following two fields are initialized automtically during boot */
+	/* the following two fields are initialized automatically during boot */
 	int id;
 	const char *name;
 
@@ -757,7 +757,7 @@ static inline void cgroup_threadgroup_change_end(struct task_struct *tsk) {}
  * sock_cgroup_data overloads (prioidx, classid) and the cgroup pointer.
  * On boot, sock_cgroup_data records the cgroup that the sock was created
  * in so that cgroup2 matches can be made; however, once either net_prio or
- * net_cls starts being used, the area is overriden to carry prioidx and/or
+ * net_cls starts being used, the area is overridden to carry prioidx and/or
  * classid.  The two modes are distinguished by whether the lowest bit is
  * set.  Clear bit indicates cgroup pointer while set bit prioidx and
  * classid.
diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h
index 4f2f79de083e..6bc9c76680b2 100644
--- a/include/linux/cgroup.h
+++ b/include/linux/cgroup.h
@@ -32,7 +32,7 @@ struct kernel_clone_args;
 #ifdef CONFIG_CGROUPS
 
 /*
- * All weight knobs on the default hierarhcy should use the following min,
+ * All weight knobs on the default hierarchy should use the following min,
  * default and max values.  The default value is the logarithmic center of
  * MIN and MAX and allows 100x to be expressed in both directions.
  */
diff --git a/include/linux/compat.h b/include/linux/compat.h
index 98dd7b324c35..8855b1b702b2 100644
--- a/include/linux/compat.h
+++ b/include/linux/compat.h
@@ -213,12 +213,11 @@ typedef struct compat_siginfo {
 		/* SIGILL, SIGFPE, SIGSEGV, SIGBUS, SIGTRAP, SIGEMT */
 		struct {
 			compat_uptr_t _addr;	/* faulting insn/memory ref. */
-#ifdef __ARCH_SI_TRAPNO
-			int _trapno;	/* TRAP # which caused the signal */
-#endif
 #define __COMPAT_ADDR_BND_PKEY_PAD  (__alignof__(compat_uptr_t) < sizeof(short) ? \
 				     sizeof(short) : __alignof__(compat_uptr_t))
 			union {
+				/* used on alpha and sparc */
+				int _trapno;	/* TRAP # which caused the signal */
 				/*
 				 * used when si_code=BUS_MCEERR_AR or
 				 * used when si_code=BUS_MCEERR_AO
@@ -236,7 +235,10 @@ typedef struct compat_siginfo {
 					u32 _pkey;
 				} _addr_pkey;
 				/* used when si_code=TRAP_PERF */
-				compat_ulong_t _perf;
+				struct {
+					compat_ulong_t _data;
+					u32 _type;
+				} _perf;
 			};
 		} _sigfault;
 
diff --git a/include/linux/compiler_attributes.h b/include/linux/compiler_attributes.h
index c043b8d2b17b..183ddd5fd072 100644
--- a/include/linux/compiler_attributes.h
+++ b/include/linux/compiler_attributes.h
@@ -199,6 +199,7 @@
  * must end with any of these keywords:
  *   break;
  *   fallthrough;
+ *   continue;
  *   goto <label>;
  *   return [expression];
  *
diff --git a/include/linux/const.h b/include/linux/const.h
index 81b8aae5a855..435ddd72d2c4 100644
--- a/include/linux/const.h
+++ b/include/linux/const.h
@@ -3,4 +3,12 @@
 
 #include <vdso/const.h>
 
+/*
+ * This returns a constant expression while determining if an argument is
+ * a constant expression, most importantly without evaluating the argument.
+ * Glory to Martin Uecker <Martin.Uecker@med.uni-goettingen.de>
+ */
+#define __is_constexpr(x) \
+	(sizeof(int) == sizeof(*(8 ? ((void *)((long)(x) * 0l)) : (int *)8)))
+
 #endif /* _LINUX_CONST_H */
diff --git a/include/linux/device.h b/include/linux/device.h
index 38a2071cf776..f1a00040fa53 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -570,7 +570,7 @@ struct device {
  * @flags: Link flags.
  * @rpm_active: Whether or not the consumer device is runtime-PM-active.
  * @kref: Count repeated addition of the same link.
- * @rcu_head: An RCU head to use for deferred execution of SRCU callbacks.
+ * @rm_work: Work structure used for removing the link.
  * @supplier_preactivated: Supplier has been made active before consumer probe.
  */
 struct device_link {
@@ -583,9 +583,7 @@ struct device_link {
 	u32 flags;
 	refcount_t rpm_active;
 	struct kref kref;
-#ifdef CONFIG_SRCU
-	struct rcu_head rcu_head;
-#endif
+	struct work_struct rm_work;
 	bool supplier_preactivated; /* Owned by consumer probe. */
 };
 
diff --git a/include/linux/dynamic_debug.h b/include/linux/dynamic_debug.h
index a57ee75342cf..dce631e678dd 100644
--- a/include/linux/dynamic_debug.h
+++ b/include/linux/dynamic_debug.h
@@ -32,6 +32,11 @@ struct _ddebug {
 #define _DPRINTK_FLAGS_INCL_FUNCNAME	(1<<2)
 #define _DPRINTK_FLAGS_INCL_LINENO	(1<<3)
 #define _DPRINTK_FLAGS_INCL_TID		(1<<4)
+
+#define _DPRINTK_FLAGS_INCL_ANY		\
+	(_DPRINTK_FLAGS_INCL_MODNAME | _DPRINTK_FLAGS_INCL_FUNCNAME |\
+	 _DPRINTK_FLAGS_INCL_LINENO  | _DPRINTK_FLAGS_INCL_TID)
+
 #if defined DEBUG
 #define _DPRINTK_FLAGS_DEFAULT _DPRINTK_FLAGS_PRINT
 #else
diff --git a/include/linux/entry-kvm.h b/include/linux/entry-kvm.h
index 8b2b1d68b954..136b8d97d8c0 100644
--- a/include/linux/entry-kvm.h
+++ b/include/linux/entry-kvm.h
@@ -3,6 +3,7 @@
 #define __LINUX_ENTRYKVM_H
 
 #include <linux/entry-common.h>
+#include <linux/tick.h>
 
 /* Transfer to guest mode work */
 #ifdef CONFIG_KVM_XFER_TO_GUEST_WORK
@@ -57,7 +58,7 @@ int xfer_to_guest_mode_handle_work(struct kvm_vcpu *vcpu);
 static inline void xfer_to_guest_mode_prepare(void)
 {
 	lockdep_assert_irqs_disabled();
-	rcu_nocb_flush_deferred_wakeup();
+	tick_nohz_user_enter_prepare();
 }
 
 /**
diff --git a/include/linux/fanotify.h b/include/linux/fanotify.h
index bad41bcb25df..a16dbeced152 100644
--- a/include/linux/fanotify.h
+++ b/include/linux/fanotify.h
@@ -51,6 +51,10 @@ extern struct ctl_table fanotify_table[]; /* for sysctl */
 #define FANOTIFY_INIT_FLAGS	(FANOTIFY_ADMIN_INIT_FLAGS | \
 				 FANOTIFY_USER_INIT_FLAGS)
 
+/* Internal group flags */
+#define FANOTIFY_UNPRIV		0x80000000
+#define FANOTIFY_INTERNAL_GROUP_FLAGS	(FANOTIFY_UNPRIV)
+
 #define FANOTIFY_MARK_TYPE_BITS	(FAN_MARK_INODE | FAN_MARK_MOUNT | \
 				 FAN_MARK_FILESYSTEM)
 
diff --git a/include/linux/fb.h b/include/linux/fb.h
index a8dccd23c249..ecfbcc0553a5 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -659,6 +659,9 @@ static inline void __fb_pad_aligned_buffer(u8 *dst, u32 d_pitch,
 /* drivers/video/fb_defio.c */
 int fb_deferred_io_mmap(struct fb_info *info, struct vm_area_struct *vma);
 extern void fb_deferred_io_init(struct fb_info *info);
+extern void fb_deferred_io_open(struct fb_info *info,
+				struct inode *inode,
+				struct file *file);
 extern void fb_deferred_io_cleanup(struct fb_info *info);
 extern int fb_deferred_io_fsync(struct file *file, loff_t start,
 				loff_t end, int datasync);
diff --git a/include/linux/genhd.h b/include/linux/genhd.h
index 7e9660ea967d..6fc26f7bdf71 100644
--- a/include/linux/genhd.h
+++ b/include/linux/genhd.h
@@ -306,8 +306,6 @@ static inline void bd_unlink_disk_holder(struct block_device *bdev,
 }
 #endif /*