Merge drm/drm-next into drm-misc-next

Let's kick-off this release cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

47 files changed, 1491 insertions, 558 deletions

diff --git a/scripts/.gitignore b/scripts/.gitignore
index eed308bef604..b7aec8eb1bd4 100644
--- a/scripts/.gitignore
+++ b/scripts/.gitignore
@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
 /asn1_compiler
 /bin2c
+/generate_rust_target
 /insert-sys-cert
 /kallsyms
 /module.lds
diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include
index ece44b735061..2bc08ace38a3 100644
--- a/scripts/Kbuild.include
+++ b/scripts/Kbuild.include
@@ -100,8 +100,29 @@ echo-cmd = $(if $($(quiet)cmd_$(1)),\
  quiet_redirect :=
 silent_redirect := exec >/dev/null;
 
+# Delete the target on interruption
+#
+# GNU Make automatically deletes the target if it has already been changed by
+# the interrupted recipe. So, you can safely stop the build by Ctrl-C (Make
+# will delete incomplete targets), and resume it later.
+#
+# However, this does not work when the stderr is piped to another program, like
+#  $ make >&2 | tee log
+# Make dies with SIGPIPE before cleaning the targets.
+#
+# To address it, we clean the target in signal traps.
+#
+# Make deletes the target when it catches SIGHUP, SIGINT, SIGQUIT, SIGTERM.
+# So, we cover them, and also SIGPIPE just in case.
+#
+# Of course, this is unneeded for phony targets.
+delete-on-interrupt = \
+	$(if $(filter-out $(PHONY), $@), \
+		$(foreach sig, HUP INT QUIT TERM PIPE, \
+			trap 'rm -f $@; trap - $(sig); kill -s $(sig) $$$$' $(sig);))
+
 # printing commands
-cmd = @set -e; $(echo-cmd) $($(quiet)redirect) $(cmd_$(1))
+cmd = @set -e; $(echo-cmd) $($(quiet)redirect) $(delete-on-interrupt) $(cmd_$(1))
 
 ###
 # if_changed      - execute command if any prerequisite is newer than
diff --git a/scripts/Kconfig.include b/scripts/Kconfig.include
index a0ccceb22cf8..274125307ebd 100644
--- a/scripts/Kconfig.include
+++ b/scripts/Kconfig.include
@@ -36,12 +36,12 @@ ld-option = $(success,$(LD) -v $(1))
 as-instr = $(success,printf "%b\n" "$(1)" | $(CC) $(CLANG_FLAGS) -c -x assembler -o /dev/null -)
 
 # check if $(CC) and $(LD) exist
-$(error-if,$(failure,command -v $(CC)),compiler '$(CC)' not found)
+$(error-if,$(failure,command -v $(CC)),C compiler '$(CC)' not found)
 $(error-if,$(failure,command -v $(LD)),linker '$(LD)' not found)
 
-# Get the compiler name, version, and error out if it is not supported.
+# Get the C compiler name, version, and error out if it is not supported.
 cc-info := $(shell,$(srctree)/scripts/cc-version.sh $(CC))
-$(error-if,$(success,test -z "$(cc-info)"),Sorry$(comma) this compiler is not supported.)
+$(error-if,$(success,test -z "$(cc-info)"),Sorry$(comma) this C compiler is not supported.)
 cc-name := $(shell,set -- $(cc-info) && echo $1)
 cc-version := $(shell,set -- $(cc-info) && echo $2)
 
diff --git a/scripts/Makefile b/scripts/Makefile
index f084f08ed176..1575af84d557 100644
--- a/scripts/Makefile
+++ b/scripts/Makefile
@@ -10,6 +10,9 @@ hostprogs-always-$(CONFIG_BUILDTIME_TABLE_SORT)		+= sorttable
 hostprogs-always-$(CONFIG_ASN1)				+= asn1_compiler
 hostprogs-always-$(CONFIG_MODULE_SIG_FORMAT)		+= sign-file
 hostprogs-always-$(CONFIG_SYSTEM_EXTRA_CERTIFICATE)	+= insert-sys-cert
+hostprogs-always-$(CONFIG_RUST)				+= generate_rust_target
+
+generate_rust_target-rust := y
 
 HOSTCFLAGS_sorttable.o = -I$(srctree)/tools/include
 HOSTLDLIBS_sorttable = -lpthread
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index 784f46d41959..41f3602fc8de 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -5,8 +5,8 @@
 
 src := $(obj)
 
-PHONY := __build
-__build:
+PHONY := $(obj)/
+$(obj)/:
 
 # Init all relevant variables used in kbuild files so
 # 1) they have correct type
@@ -26,6 +26,7 @@ EXTRA_CPPFLAGS :=
 EXTRA_LDFLAGS  :=
 asflags-y  :=
 ccflags-y  :=
+rustflags-y :=
 cppflags-y :=
 ldflags-y  :=
 
@@ -139,7 +140,7 @@ $(obj)/%.symtypes : $(src)/%.c FORCE
 # LLVM assembly
 # Generate .ll files from .c
 quiet_cmd_cc_ll_c = CC $(quiet_modtag)  $@
-      cmd_cc_ll_c = $(CC) $(c_flags) -emit-llvm -S -o $@ $<
+      cmd_cc_ll_c = $(CC) $(c_flags) -emit-llvm -S -fno-discard-value-names -o $@ $<
 
 $(obj)/%.ll: $(src)/%.c FORCE
 	$(call if_changed_dep,cc_ll_c)
@@ -271,6 +272,65 @@ quiet_cmd_cc_lst_c = MKLST   $@
 $(obj)/%.lst: $(src)/%.c FORCE
 	$(call if_changed_dep,cc_lst_c)
 
+# Compile Rust sources (.rs)
+# ---------------------------------------------------------------------------
+
+rust_allowed_features := core_ffi_c
+
+rust_common_cmd = \
+	RUST_MODFILE=$(modfile) $(RUSTC_OR_CLIPPY) $(rust_flags) \
+	-Zallow-features=$(rust_allowed_features) \
+	-Zcrate-attr=no_std \
+	-Zcrate-attr='feature($(rust_allowed_features))' \
+	--extern alloc --extern kernel \
+	--crate-type rlib --out-dir $(obj) -L $(objtree)/rust/ \
+	--crate-name $(basename $(notdir $@))
+
+rust_handle_depfile = \
+	mv $(obj)/$(basename $(notdir $@)).d $(depfile); \
+	sed -i '/^\#/d' $(depfile)
+
+# `--emit=obj`, `--emit=asm` and `--emit=llvm-ir` imply a single codegen unit
+# will be used. We explicitly request `-Ccodegen-units=1` in any case, and
+# the compiler shows a warning if it is not 1. However, if we ever stop
+# requesting it explicitly and we start using some other `--emit` that does not
+# imply it (and for which codegen is performed), then we would be out of sync,
+# i.e. the outputs we would get for the different single targets (e.g. `.ll`)
+# would not match each other.
+
+quiet_cmd_rustc_o_rs = $(RUSTC_OR_CLIPPY_QUIET) $(quiet_modtag) $@
+      cmd_rustc_o_rs = \
+	$(rust_common_cmd) --emit=dep-info,obj $<; \
+	$(rust_handle_depfile)
+
+$(obj)/%.o: $(src)/%.rs FORCE
+	$(call if_changed_dep,rustc_o_rs)
+
+quiet_cmd_rustc_rsi_rs = $(RUSTC_OR_CLIPPY_QUIET) $(quiet_modtag) $@
+      cmd_rustc_rsi_rs = \
+	$(rust_common_cmd) --emit=dep-info -Zunpretty=expanded $< >$@; \
+	command -v $(RUSTFMT) >/dev/null && $(RUSTFMT) $@; \
+	$(rust_handle_depfile)
+
+$(obj)/%.rsi: $(src)/%.rs FORCE
+	$(call if_changed_dep,rustc_rsi_rs)
+
+quiet_cmd_rustc_s_rs = $(RUSTC_OR_CLIPPY_QUIET) $(quiet_modtag) $@
+      cmd_rustc_s_rs = \
+	$(rust_common_cmd) --emit=dep-info,asm $<; \
+	$(rust_handle_depfile)
+
+$(obj)/%.s: $(src)/%.rs FORCE
+	$(call if_changed_dep,rustc_s_rs)
+
+quiet_cmd_rustc_ll_rs = $(RUSTC_OR_CLIPPY_QUIET) $(quiet_modtag) $@
+      cmd_rustc_ll_rs = \
+	$(rust_common_cmd) --emit=dep-info,llvm-ir $<; \
+	$(rust_handle_depfile)
+
+$(obj)/%.ll: $(src)/%.rs FORCE
+	$(call if_changed_dep,rustc_ll_rs)
+
 # Compile assembler sources (.S)
 # ---------------------------------------------------------------------------
 
@@ -323,7 +383,7 @@ $(obj)/%.o: $(src)/%.S FORCE
 
 targets += $(filter-out $(subdir-builtin), $(real-obj-y))
 targets += $(filter-out $(subdir-modorder), $(real-obj-m))
-targets += $(real-dtb-y) $(lib-y) $(always-y) $(MAKECMDGOALS)
+targets += $(real-dtb-y) $(lib-y) $(always-y)
 
 # Linker scripts preprocessor (.lds.S -> .lds)
 # ---------------------------------------------------------------------------
@@ -374,7 +434,7 @@ $(obj)/built-in.a: $(real-obj-y) FORCE
 
 cmd_modules_order = { $(foreach m, $(real-prereqs), \
 	$(if $(filter %/modules.order, $m), cat $m, echo $(patsubst %.o,%.ko,$m));) :; } \
-	| $(AWK) '!x[$$0]++' - > $@
+	> $@
 
 $(obj)/modules.order: $(obj-m) FORCE
 	$(call if_changed,modules_order)
@@ -400,8 +460,6 @@ $(multi-obj-m): %.o: %.mod FORCE
 	$(call if_changed_rule,ld_multi_m)
 $(call multi_depend, $(multi-obj-m), .o, -objs -y -m)
 
-targets := $(filter-out $(PHONY), $(targets))
-
 # Add intermediate targets:
 # When building objects with specific suffix patterns, add intermediate
 # targets that the final targets are derived from.
@@ -420,52 +478,29 @@ targets += $(call intermediate_targets, .asn1.o, .asn1.c .asn1.h) \
 # Build
 # ---------------------------------------------------------------------------
 
-ifdef single-build
-
-KBUILD_SINGLE_TARGETS := $(filter $(obj)/%, $(KBUILD_SINGLE_TARGETS))
-
-curdir-single := $(sort $(foreach x, $(KBUILD_SINGLE_TARGETS), \
-			$(if $(filter $(x) $(basename $(x)).o, $(targets)), $(x))))
-
-# Handle single targets without any rule: show "Nothing to be done for ..." or
-# "No rule to make target ..." depending on whether the target exists.
-unknown-single := $(filter-out $(addsuffix /%, $(subdir-ym)), \
-			$(filter-out $(curdir-single), $(KBUILD_SINGLE_TARGETS)))
-
-single-subdirs := $(foreach d, $(subdir-ym), \
-			$(if $(filter $(d)/%, $(KBUILD_SINGLE_TARGETS)), $(d)))
-
-__build: $(curdir-single) $(single-subdirs)
-ifneq ($(unknown-single),)
-	$(Q)$(MAKE) -f /dev/null $(unknown-single)
-endif
+$(obj)/: $(if $(KBUILD_BUILTIN), $(targets-for-builtin)) \
+	 $(if $(KBUILD_MODULES), $(targets-for-modules)) \
+	 $(subdir-ym) $(always-y)
 	@:
 
-ifeq ($(curdir-single),)
-# Nothing to do in this directory. Do not include any .*.cmd file for speed-up
-targets :=
-else
-targets += $(curdir-single)
-endif
+# Single targets
+# ---------------------------------------------------------------------------
 
-else
+single-subdirs := $(foreach d, $(subdir-ym), $(if $(filter $d/%, $(MAKECMDGOALS)), $d))
+single-subdir-goals := $(filter $(addsuffix /%, $(single-subdirs)), $(MAKECMDGOALS))
 
-__build: $(if $(KBUILD_BUILTIN), $(targets-for-builtin)) \
-	 $(if $(KBUILD_MODULES), $(targets-for-modules)) \
-	 $(subdir-ym) $(always-y)
+$(single-subdir-goals): $(single-subdirs)
 	@:
 
-endif
-
 # Descending
 # ---------------------------------------------------------------------------
 
 PHONY += $(subdir-ym)
 $(subdir-ym):
 	$(Q)$(MAKE) $(build)=$@ \
-	$(if $(filter $@/, $(KBUILD_SINGLE_TARGETS)),single-build=) \
 	need-builtin=$(if $(filter $@/built-in.a, $(subdir-builtin)),1) \
-	need-modorder=$(if $(filter $@/modules.order, $(subdir-modorder)),1)
+	need-modorder=$(if $(filter $@/modules.order, $(subdir-modorder)),1) \
+	$(filter $@/%, $(single-subdir-goals))
 
 # Add FORCE to the prequisites of a target to force it to be always rebuilt.
 # ---------------------------------------------------------------------------
@@ -474,6 +509,9 @@ PHONY += FORCE
 
 FORCE:
 
+targets += $(filter-out $(single-subdir-goals), $(MAKECMDGOALS))
+targets := $(filter-out $(PHONY), $(targets))
+
 # Read all saved command lines and dependencies for the $(targets) we
 # may be building above, using $(if_changed{,_dep}). As an
 # optimization, we don't need to read them if the target does not
diff --git a/scripts/Makefile.compiler b/scripts/Makefile.compiler
index 94d0d40cddb3..20d353dcabfb 100644
--- a/scripts/Makefile.compiler
+++ b/scripts/Makefile.compiler
@@ -61,9 +61,13 @@ cc-option-yn = $(call try-run,\
 cc-disable-warning = $(call try-run,\
 	$(CC) -Werror $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) -W$(strip $(1)) -c -x c /dev/null -o "$$TMP",-Wno-$(strip $(1)))
 
-# cc-ifversion
-# Usage:  EXTRA_CFLAGS += $(call cc-ifversion, -lt, 0402, -O1)
-cc-ifversion = $(shell [ $(CONFIG_GCC_VERSION)0 $(1) $(2)000 ] && echo $(3) || echo $(4))
+# gcc-min-version
+# Usage: cflags-$(call gcc-min-version, 70100) += -foo
+gcc-min-version = $(shell [ $(CONFIG_GCC_VERSION)0 -ge $(1)0 ] && echo y)
+
+# clang-min-version
+# Usage: cflags-$(call clang-min-version, 110000) += -foo
+clang-min-version = $(shell [ $(CONFIG_CLANG_VERSION)0 -ge $(1)0 ] && echo y)
 
 # ld-option
 # Usage: KBUILD_LDFLAGS += $(call ld-option, -X, -Y)
diff --git a/scripts/Makefile.debug b/scripts/Makefile.debug
index 9f39b0130551..332c486f705f 100644
--- a/scripts/Makefile.debug
+++ b/scripts/Makefile.debug
@@ -1,26 +1,30 @@
 DEBUG_CFLAGS	:=
+DEBUG_RUSTFLAGS	:=
+
+debug-flags-y	:= -g
 
 ifdef CONFIG_DEBUG_INFO_SPLIT
 DEBUG_CFLAGS	+= -gsplit-dwarf
-else
-DEBUG_CFLAGS	+= -g
-endif
-
-ifndef CONFIG_AS_IS_LLVM
-KBUILD_AFLAGS	+= -Wa,-gdwarf-2
 endif
 
-ifndef CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT
-dwarf-version-$(CONFIG_DEBUG_INFO_DWARF4) := 4
-dwarf-version-$(CONFIG_DEBUG_INFO_DWARF5) := 5
-DEBUG_CFLAGS	+= -gdwarf-$(dwarf-version-y)
+debug-flags-$(CONFIG_DEBUG_INFO_DWARF4)	+= -gdwarf-4
+debug-flags-$(CONFIG_DEBUG_INFO_DWARF5)	+= -gdwarf-5
+ifeq ($(CONFIG_CC_IS_CLANG)$(CONFIG_AS_IS_GNU),yy)
+# Clang does not pass -g or -gdwarf-* option down to GAS.
+# Add -Wa, prefix to explicitly specify the flags.
+KBUILD_AFLAGS	+= $(addprefix -Wa$(comma), $(debug-flags-y))
 endif
+DEBUG_CFLAGS	+= $(debug-flags-y)
+KBUILD_AFLAGS	+= $(debug-flags-y)
 
 ifdef CONFIG_DEBUG_INFO_REDUCED
 DEBUG_CFLAGS	+= -fno-var-tracking
+DEBUG_RUSTFLAGS	+= -Cdebuginfo=1
 ifdef CONFIG_CC_IS_GCC
 DEBUG_CFLAGS	+= -femit-struct-debug-baseonly
 endif
+else
+DEBUG_RUSTFLAGS	+= -Cdebuginfo=2
 endif
 
 ifdef CONFIG_DEBUG_INFO_COMPRESSED
@@ -29,5 +33,8 @@ KBUILD_AFLAGS	+= -gz=zlib
 KBUILD_LDFLAGS	+= --compress-debug-sections=zlib
 endif
 
-KBUILD_CFLAGS += $(DEBUG_CFLAGS)
+KBUILD_CFLAGS	+= $(DEBUG_CFLAGS)
 export DEBUG_CFLAGS
+
+KBUILD_RUSTFLAGS += $(DEBUG_RUSTFLAGS)
+export DEBUG_RUSTFLAGS
diff --git a/scripts/Makefile.extrawarn b/scripts/Makefile.extrawarn
index 0621c39a3955..6bbba36c5969 100644
--- a/scripts/Makefile.extrawarn
+++ b/scripts/Makefile.extrawarn
@@ -47,11 +47,24 @@ else
 
 ifdef CONFIG_CC_IS_CLANG
 KBUILD_CFLAGS += -Wno-initializer-overrides
+# Clang before clang-16 would warn on default argument promotions.
+ifneq ($(call clang-min-version, 160000),y)
+# Disable -Wformat
 KBUILD_CFLAGS += -Wno-format
+# Then re-enable flags that were part of the -Wformat group that aren't
+# problematic.
+KBUILD_CFLAGS += -Wformat-extra-args -Wformat-invalid-specifier
+KBUILD_CFLAGS += -Wformat-zero-length -Wnonnull
+# Requires clang-12+.
+ifeq ($(call clang-min-version, 120000),y)
+KBUILD_CFLAGS += -Wformat-insufficient-args
+endif
+endif
 KBUILD_CFLAGS += -Wno-sign-compare
 KBUILD_CFLAGS += $(call cc-disable-warning, pointer-to-enum-cast)
 KBUILD_CFLAGS += -Wno-tautological-constant-out-of-range-compare
 KBUILD_CFLAGS += $(call cc-disable-warning, unaligned-access)
+KBUILD_CFLAGS += $(call cc-disable-warning, cast-function-type-strict)
 endif
 
 endif
diff --git a/scripts/Makefile.host b/scripts/Makefile.host
index 278b4d6ac945..da133780b751 100644
--- a/scripts/Makefile.host
+++ b/scripts/Makefile.host
@@ -22,6 +22,8 @@ $(obj)/%.tab.c $(obj)/%.tab.h: $(src)/%.y FORCE
 # to preprocess a data file.
 #
 # Both C and C++ are supported, but preferred language is C for such utilities.
+# Rust is also supported, but it may only be used in scenarios where a Rust
+# toolchain is required to be available (e.g. when  `CONFIG_RUST` is enabled).
 #
 # Sample syntax (see Documentation/kbuild/makefiles.rst for reference)
 # hostprogs := bin2hex
@@ -37,15 +39,20 @@ $(obj)/%.tab.c $(obj)/%.tab.h: $(src)/%.y FORCE
 # qconf-objs      := menu.o
 # Will compile qconf as a C++ program, and menu as a C program.
 # They are linked as C++ code to the executable qconf
+#
+# hostprogs   := target
+# target-rust := y
+# Will compile `target` as a Rust program, using `target.rs` as the crate root.
+# The crate may consist of several source files.
 
 # C code
 # Executables compiled from a single .c file
 host-csingle	:= $(foreach m,$(hostprogs), \
-			$(if $($(m)-objs)$($(m)-cxxobjs),,$(m)))
+			$(if $($(m)-objs)$($(m)-cxxobjs)$($(m)-rust),,$(m)))
 
 # C executables linked based on several .o files
 host-cmulti	:= $(foreach m,$(hostprogs),\
-		   $(if $($(m)-cxxobjs),,$(if $($(m)-objs),$(m))))
+		   $(if $($(m)-cxxobjs)$($(m)-rust),,$(if $($(m)-objs),$(m))))
 
 # Object (.o) files compiled from .c files
 host-cobjs	:= $(sort $(foreach m,$(hostprogs),$($(m)-objs)))
@@ -58,11 +65,17 @@ host-cxxmulti	:= $(foreach m,$(hostprogs),$(if $($(m)-cxxobjs),$(m)))
 # C++ Object (.o) files compiled from .cc files
 host-cxxobjs	:= $(sort $(foreach m,$(host-cxxmulti),$($(m)-cxxobjs)))
 
+# Rust code
+# Executables compiled from a single Rust crate (which may consist of
+# one or more .rs files)
+host-rust	:= $(foreach m,$(hostprogs),$(if $($(m)-rust),$(m)))
+
 host-csingle	:= $(addprefix $(obj)/,$(host-csingle))
 host-cmulti	:= $(addprefix $(obj)/,$(host-cmulti))
 host-cobjs	:= $(addprefix $(obj)/,$(host-cobjs))
 host-cxxmulti	:= $(addprefix $(obj)/,$(host-cxxmulti))
 host-cxxobjs	:= $(addprefix $(obj)/,$(host-cxxobjs))
+host-rust	:= $(addprefix $(obj)/,$(host-rust))
 
 #####
 # Handle options to gcc. Support building with separate output directory
@@ -71,6 +84,8 @@ _hostc_flags   = $(KBUILD_HOSTCFLAGS)   $(HOST_EXTRACFLAGS)   \
                  $(HOSTCFLAGS_$(target-stem).o)
 _hostcxx_flags = $(KBUILD_HOSTCXXFLAGS) $(HOST_EXTRACXXFLAGS) \
                  $(HOSTCXXFLAGS_$(target-stem).o)
+_hostrust_flags = $(KBUILD_HOSTRUSTFLAGS) $(HOST_EXTRARUSTFLAGS) \
+                  $(HOSTRUSTFLAGS_$(target-stem))
 
 # $(objtree)/$(obj) for including generated headers from checkin source files
 ifeq ($(KBUILD_EXTMOD),)
@@ -82,6 +97,7 @@ endif
 
 hostc_flags    = -Wp,-MMD,$(depfile) $(_hostc_flags)
 hostcxx_flags  = -Wp,-MMD,$(depfile) $(_hostcxx_flags)
+hostrust_flags = $(_hostrust_flags)
 
 #####
 # Compile programs on the host
@@ -128,5 +144,17 @@ quiet_cmd_host-cxxobjs	= HOSTCXX $@
 $(host-cxxobjs): $(obj)/%.o: $(src)/%.cc FORCE
 	$(call if_changed_dep,host-cxxobjs)
 
+# Create executable from a single Rust crate (which may consist of
+# one or more `.rs` files)
+# host-rust -> Executable
+quiet_cmd_host-rust	= HOSTRUSTC $@
+      cmd_host-rust	= \
+	$(HOSTRUSTC) $(hostrust_flags) --emit=dep-info,link \
+		--out-dir=$(obj)/ $<; \
+	mv $(obj)/$(target-stem).d $(depfile); \
+	sed -i '/^\#/d' $(depfile)
+$(host-rust): $(obj)/%: $(src)/%.rs FORCE
+	$(call if_changed_dep,host-rust)
+
 targets += $(host-csingle) $(host-cmulti) $(host-cobjs) \
-	   $(host-cxxmulti) $(host-cxxobjs)
+	   $(host-cxxmulti) $(host-cxxobjs) $(host-rust)
diff --git a/scripts/Makefile.kmsan b/scripts/Makefile.kmsan
new file mode 100644
index 000000000000..b5b0aa61322e
--- /dev/null
+++ b/scripts/Makefile.kmsan
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+kmsan-cflags := -fsanitize=kernel-memory
+
+ifdef CONFIG_KMSAN_CHECK_PARAM_RETVAL
+kmsan-cflags += -fsanitize-memory-param-retval
+endif
+
+export CFLAGS_KMSAN := $(kmsan-cflags)
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index 3fb6a99e78c4..3aa384cec76b 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -8,6 +8,7 @@ ldflags-y  += $(EXTRA_LDFLAGS)
 # flags that take effect in current and sub directories
 KBUILD_AFLAGS += $(subdir-asflags-y)
 KBUILD_CFLAGS += $(subdir-ccflags-y)
+KBUILD_RUSTFLAGS += $(subdir-rustflags-y)
 
 # Figure out what we need to build from the various variables
 # ===========================================================================
@@ -89,6 +90,7 @@ always-y			+= $(dtb-y)
 
 # Add subdir path
 
+ifneq ($(obj),.)
 extra-y		:= $(addprefix $(obj)/,$(extra-y))
 always-y	:= $(addprefix $(obj)/,$(always-y))
 targets		:= $(addprefix $(obj)/,$(targets))
@@ -100,6 +102,7 @@ multi-obj-m	:= $(addprefix $(obj)/, $(multi-obj-m))
 multi-dtb-y	:= $(addprefix $(obj)/, $(multi-dtb-y))
 real-dtb-y	:= $(addprefix $(obj)/, $(real-dtb-y))
 subdir-ym	:= $(addprefix $(obj)/,$(subdir-ym))
+endif
 
 # Finds the multi-part object the current object will be linked into.
 # If the object belongs to two or more multi-part objects, list them all.
@@ -128,6 +131,10 @@ _c_flags       = $(filter-out $(CFLAGS_REMOVE_$(target-stem).o), \
                      $(filter-out $(ccflags-remove-y), \
                          $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) $(ccflags-y)) \
                      $(CFLAGS_$(target-stem).o))
+_rust_flags    = $(filter-out $(RUSTFLAGS_REMOVE_$(target-stem).o), \
+                     $(filter-out $(rustflags-remove-y), \
+                         $(KBUILD_RUSTFLAGS) $(rustflags-y)) \
+                     $(RUSTFLAGS_$(target-stem).o))
 _a_flags       = $(filter-out $(AFLAGS_REMOVE_$(target-stem).o), \
                      $(filter-out $(asflags-remove-y), \
                          $(KBUILD_CPPFLAGS) $(KBUILD_AFLAGS) $(asflags-y)) \
@@ -157,6 +164,15 @@ _c_flags += $(if $(patsubst n%,, \
 endif
 endif
 
+ifeq ($(CONFIG_KMSAN),y)
+_c_flags += $(if $(patsubst n%,, \
+		$(KMSAN_SANITIZE_$(basetarget).o)$(KMSAN_SANITIZE)y), \
+		$(CFLAGS_KMSAN))
+_c_flags += $(if $(patsubst n%,, \
+		$(KMSAN_ENABLE_CHECKS_$(basetarget).o)$(KMSAN_ENABLE_CHECKS)y), \
+		, -mllvm -msan-disable-checks=1)
+endif
+
 ifeq ($(CONFIG_UBSAN),y)
 _c_flags += $(if $(patsubst n%,, \
 		$(UBSAN_SANITIZE_$(basetarget).o)$(UBSAN_SANITIZE)$(CONFIG_UBSAN_SANITIZE_ALL)), \
@@ -202,6 +218,11 @@ modkern_cflags =                                          \
 		$(KBUILD_CFLAGS_MODULE) $(CFLAGS_MODULE), \
 		$(KBUILD_CFLAGS_KERNEL) $(CFLAGS_KERNEL) $(modfile_flags))
 
+modkern_rustflags =                                              \
+	$(if $(part-of-module),                                   \
+		$(KBUILD_RUSTFLAGS_MODULE) $(RUSTFLAGS_MODULE), \
+		$(KBUILD_RUSTFLAGS_KERNEL) $(RUSTFLAGS_KERNEL))
+
 modkern_aflags = $(if $(part-of-module),				\
 			$(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE),	\
 			$(KBUILD_AFLAGS_KERNEL) $(AFLAGS_KERNEL))
@@ -211,6 +232,8 @@ c_flags        = -Wp,-MMD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE)     \
 		 $(_c_flags) $(modkern_cflags)                           \
 		 $(basename_flags) $(modname_flags)
 
+rust_flags     = $(_rust_flags) $(modkern_rustflags) @$(objtree)/include/generated/rustc_cfg
+
 a_flags        = -Wp,-MMD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE)     \
 		 $(_a_flags) $(modkern_aflags)
 
@@ -229,25 +252,26 @@ ifdef CONFIG_OBJTOOL
 
 objtool := $(objtree)/tools/objtool/objtool
 
-objtool_args =								\
-	$(if $(CONFIG_HAVE_JUMP_LABEL_HACK), --hacks=jump_label)	\
-	$(if $(CONFIG_HAVE_NOINSTR_HACK), --hacks=noinstr)		\
-	$(if $(CONFIG_X86_KERNEL_IBT), --ibt)				\
-	$(if $(CONFIG_FTRACE_MCOUNT_USE_OBJTOOL), --mcount)		\
-	$(if $(CONFIG_UNWINDER_ORC), --orc)				\
-	$(if $(CONFIG_RETPOLINE), --retpoline)				\
-	$(if $(CONFIG_RETHUNK), --rethunk)				\
-	$(if $(CONFIG_SLS), --sls)					\
-	$(if $(CONFIG_STACK_VALIDATION), --stackval)			\
-	$(if $(CONFIG_HAVE_STATIC_CALL_INLINE), --static-call)		\
-	$(if $(CONFIG_HAVE_UACCESS_VALIDATION), --uaccess)		\
+objtool-args-$(CONFIG_HAVE_JUMP_LABEL_HACK)		+= --hacks=jump_label
+objtool-args-$(CONFIG_HAVE_NOINSTR_HACK)		+= --hacks=noinstr
+objtool-args-$(CONFIG_X86_KERNEL_IBT)			+= --ibt
+objtool-args-$(CONFIG_FTRACE_MCOUNT_USE_OBJTOOL)	+= --mcount
+objtool-args-$(CONFIG_UNWINDER_ORC)			+= --orc
+objtool-args-$(CONFIG_RETPOLINE)			+= --retpoline
+objtool-args-$(CONFIG_RETHUNK)				+= --rethunk
+objtool-args-$(CONFIG_SLS)				+= --sls
+objtool-args-$(CONFIG_STACK_VALIDATION)			+= --stackval
+objtool-args-$(CONFIG_HAVE_STATIC_CALL_INLINE)		+= --static-call
+objtool-args-$(CONFIG_HAVE_UACCESS_VALIDATION)		+= --uaccess
+objtool-args-$(CONFIG_GCOV_KERNEL)			+= --no-unreachable
+
+objtool-args = $(objtool-args-y)					\
 	$(if $(delay-objtool), --link)					\
-	$(if $(part-of-module), --module)				\
-	$(if $(CONFIG_GCOV_KERNEL), --no-unreachable)
+	$(if $(part-of-module), --module)
 
 delay-objtool := $(or $(CONFIG_LTO_CLANG),$(CONFIG_X86_KERNEL_IBT))
 
-cmd_objtool = $(if $(objtool-enabled), ; $(objtool) $(objtool_args) $@)
+cmd_objtool = $(if $(objtool-enabled), ; $(objtool) $(objtool-args) $@)
 cmd_gen_objtooldep = $(if $(objtool-enabled), { echo ; echo '$@: $$(wildcard $(objtool))' ; } >> $(dot-target).cmd)
 
 endif # CONFIG_OBJTOOL
@@ -371,17 +395,15 @@ DT_CHECKER_FLAGS ?= $(if $