e1000e: fix accessing to suspended device

This patch fixes some annoying messages like 'Error reading PHY register' and
'Hardware Erorr' and saves several seconds on reboot.

Cc: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Borislav Petkov <bp@suse.de>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c
index 2c1813737f6d2562189065d945a5002750d8e10c..f91a8f3f9d48beff868f0e9e567ec1779273c877 100644 (file)
--- a/drivers/net/ethernet/intel/e1000e/ethtool.c
+++ b/drivers/net/ethernet/intel/e1000e/ethtool.c
@@ -36,6 +36,7 @@
 #include <linux/delay.h>
 #include <linux/vmalloc.h>
 #include <linux/mdio.h>
 #include <linux/delay.h>
 #include <linux/vmalloc.h>
 #include <linux/mdio.h>

+#include <linux/pm_runtime.h>

 
 #include "e1000.h"
 
 
 #include "e1000.h"
 


@@ -2229,7 +2230,19 @@ static int e1000e_get_ts_info(struct net_device *netdev,
        return 0;
 }
 
        return 0;
 }
 

+static int e1000e_ethtool_begin(struct net_device *netdev)
+{
+       return pm_runtime_get_sync(netdev->dev.parent);
+}
+
+static void e1000e_ethtool_complete(struct net_device *netdev)
+{
+       pm_runtime_put_sync(netdev->dev.parent);
+}
+

 static const struct ethtool_ops e1000_ethtool_ops = {
 static const struct ethtool_ops e1000_ethtool_ops = {

+       .begin                  = e1000e_ethtool_begin,
+       .complete               = e1000e_ethtool_complete,

        .get_settings           = e1000_get_settings,
        .set_settings           = e1000_set_settings,
        .get_drvinfo            = e1000_get_drvinfo,
        .get_settings           = e1000_get_settings,
        .set_settings           = e1000_set_settings,
        .get_drvinfo            = e1000_get_drvinfo,

diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 2954cc7352e13f080ef808ee19566620b9fdb7e8..948b86ffa4f027753eec3f5b57b45b90277947ab 100644 (file)
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -4663,6 +4663,7 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter)
            (adapter->hw.phy.media_type == e1000_media_type_copper)) {
                int ret_val;
 
            (adapter->hw.phy.media_type == e1000_media_type_copper)) {
                int ret_val;
 

+               pm_runtime_get_sync(&adapter->pdev->dev);

                ret_val = e1e_rphy(hw, MII_BMCR, &phy->bmcr);
                ret_val |= e1e_rphy(hw, MII_BMSR, &phy->bmsr);
                ret_val |= e1e_rphy(hw, MII_ADVERTISE, &phy->advertise);
                ret_val = e1e_rphy(hw, MII_BMCR, &phy->bmcr);
                ret_val |= e1e_rphy(hw, MII_BMSR, &phy->bmsr);
                ret_val |= e1e_rphy(hw, MII_ADVERTISE, &phy->advertise);


@@ -4673,6 +4674,7 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter)
                ret_val |= e1e_rphy(hw, MII_ESTATUS, &phy->estatus);
                if (ret_val)
                        e_warn("Error reading PHY register\n");
                ret_val |= e1e_rphy(hw, MII_ESTATUS, &phy->estatus);
                if (ret_val)
                        e_warn("Error reading PHY register\n");

+               pm_runtime_put_sync(&adapter->pdev->dev);

        } else {
                /* Do not read PHY registers if link is not up
                 * Set values to typical power-on defaults
        } else {
                /* Do not read PHY registers if link is not up
                 * Set values to typical power-on defaults