diff options
20 files changed, 1008 insertions, 6 deletions
diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv080wum-nl0.txt b/Documentation/devicetree/bindings/display/panel/boe,tv080wum-nl0.txt new file mode 100644 index 000000000000..50be5e2438b2 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/boe,tv080wum-nl0.txt @@ -0,0 +1,7 @@ +Boe Corporation 8.0" WUXGA TFT LCD panel + +Required properties: +- compatible: should be "boe,tv080wum-nl0" + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/innolux,g121x1-l03.txt b/Documentation/devicetree/bindings/display/panel/innolux,g121x1-l03.txt new file mode 100644 index 000000000000..649744620ae1 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/innolux,g121x1-l03.txt @@ -0,0 +1,7 @@ +Innolux Corporation 12.1" G121X1-L03 XGA (1024x768) TFT LCD panel + +Required properties: +- compatible: should be "innolux,g121x1-l03" + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/kyo,tcg121xglp.txt b/Documentation/devicetree/bindings/display/panel/kyo,tcg121xglp.txt new file mode 100644 index 000000000000..a8e940fe731e --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/kyo,tcg121xglp.txt @@ -0,0 +1,7 @@ +Kyocera Corporation 12.1" XGA (1024x768) TFT LCD panel + +Required properties: +- compatible: should be "kyo,tcg121xglp" + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.txt b/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.txt new file mode 100644 index 000000000000..3770a111968b --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.txt @@ -0,0 +1,22 @@ +Sharp Microelectronics 4.3" qHD TFT LCD panel + +Required properties: +- compatible: should be "sharp,ls043t1le01-qhd" +- reg: DSI virtual channel of the peripheral +- power-supply: phandle of the regulator that provides the supply voltage + +Optional properties: +- backlight: phandle of the backlight device attached to the panel +- reset-gpios: a GPIO spec for the reset pin + +Example: + + mdss_dsi@fd922800 { + panel@0 { + compatible = "sharp,ls043t1le01-qhd"; + reg = <0>; + avdd-supply = <&pm8941_l22>; + backlight = <&pm8941_wled>; + reset-gpios = <&pm8941_gpios 19 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/panel/panasonic,vvx10f034n00.txt b/Documentation/devicetree/bindings/panel/panasonic,vvx10f034n00.txt new file mode 100644 index 000000000000..37dedf6a6702 --- /dev/null +++ b/Documentation/devicetree/bindings/panel/panasonic,vvx10f034n00.txt @@ -0,0 +1,20 @@ +Panasonic 10" WUXGA TFT LCD panel + +Required properties: +- compatible: should be "panasonic,vvx10f034n00" +- reg: DSI virtual channel of the peripheral +- power-supply: phandle of the regulator that provides the supply voltage + +Optional properties: +- backlight: phandle of the backlight device attached to the panel + +Example: + + mdss_dsi@fd922800 { + panel@0 { + compatible = "panasonic,vvx10f034n00"; + reg = <0>; + power-supply = <&vreg_vsp>; + backlight = <&lp8566_wled>; + }; + }; diff --git a/Documentation/devicetree/bindings/panel/qiaodian,qd43003c0-40.txt b/Documentation/devicetree/bindings/panel/qiaodian,qd43003c0-40.txt new file mode 100644 index 000000000000..0fbdab89ac3d --- /dev/null +++ b/Documentation/devicetree/bindings/panel/qiaodian,qd43003c0-40.txt @@ -0,0 +1,7 @@ +QiaoDian XianShi Corporation 4"3 TFT LCD panel + +Required properties: +- compatible: should be "qiaodian,qd43003c0-40" + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 55df1d444e9f..6b0fc4ff3c47 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -33,6 +33,7 @@ auo AU Optronics Corporation avago Avago Technologies avic Shanghai AVIC Optoelectronics Co., Ltd. axis Axis Communications AB +boe BOE Technology Group Co., Ltd. bosch Bosch Sensortec GmbH boundary Boundary Devices Inc. brcm Broadcom Corporation @@ -123,6 +124,7 @@ jedec JEDEC Solid State Technology Association karo Ka-Ro electronics GmbH keymile Keymile GmbH kinetic Kinetic Technologies +kyo Kyocera Corporation lacie LaCie lantiq Lantiq Semiconductor lenovo Lenovo Group Ltd. @@ -180,6 +182,7 @@ qca Qualcomm Atheros, Inc. qcom Qualcomm Technologies, Inc qemu QEMU, a generic and open source machine emulator and virtualizer qi Qi Hardware +qiaodian QiaoDian XianShi Corporation qnap QNAP Systems, Inc. radxa Radxa raidsonic RaidSonic Technology GmbH diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig index 6dddd392aa42..27e2022de89d 100644 --- a/drivers/gpu/drm/bridge/Kconfig +++ b/drivers/gpu/drm/bridge/Kconfig @@ -22,7 +22,6 @@ config DRM_DW_HDMI_AHB_AUDIO Designware HDMI block. This is used in conjunction with the i.MX6 HDMI driver. - config DRM_NXP_PTN3460 tristate "NXP PTN3460 DP/LVDS bridge" depends on OF diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile index d4e28beec30e..f13c33d67c03 100644 --- a/drivers/gpu/drm/bridge/Makefile +++ b/drivers/gpu/drm/bridge/Makefile @@ -1,6 +1,6 @@ ccflags-y := -Iinclude/drm -obj-$(CONFIG_DRM_DW_HDMI) += dw_hdmi.o -obj-$(CONFIG_DRM_DW_HDMI_AHB_AUDIO) += dw_hdmi-ahb-audio.o +obj-$(CONFIG_DRM_DW_HDMI) += dw-hdmi.o +obj-$(CONFIG_DRM_DW_HDMI_AHB_AUDIO) += dw-hdmi-ahb-audio.o obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o diff --git a/drivers/gpu/drm/bridge/dw_hdmi-ahb-audio.c b/drivers/gpu/drm/bridge/dw-hdmi-ahb-audio.c index 59f630f1c61a..122bb015f4a9 100644 --- a/drivers/gpu/drm/bridge/dw_hdmi-ahb-audio.c +++ b/drivers/gpu/drm/bridge/dw-hdmi-ahb-audio.c @@ -21,7 +21,7 @@ #include <sound/pcm_drm_eld.h> #include <sound/pcm_iec958.h> -#include "dw_hdmi-audio.h" +#include "dw-hdmi-audio.h" #define DRIVER_NAME "dw-hdmi-ahb-audio" diff --git a/drivers/gpu/drm/bridge/dw_hdmi-audio.h b/drivers/gpu/drm/bridge/dw-hdmi-audio.h index 91f631beecc7..91f631beecc7 100644 --- a/drivers/gpu/drm/bridge/dw_hdmi-audio.h +++ b/drivers/gpu/drm/bridge/dw-hdmi-audio.h diff --git a/drivers/gpu/drm/bridge/dw_hdmi.c b/drivers/gpu/drm/bridge/dw-hdmi.c index 56de9f1c95fc..298018a8562e 100644 --- a/drivers/gpu/drm/bridge/dw_hdmi.c +++ b/drivers/gpu/drm/bridge/dw-hdmi.c @@ -27,8 +27,8 @@ #include <drm/drm_encoder_slave.h> #include <drm/bridge/dw_hdmi.h> -#include "dw_hdmi.h" -#include "dw_hdmi-audio.h" +#include "dw-hdmi.h" +#include "dw-hdmi-audio.h" #define HDMI_EDID_LEN 512 diff --git a/drivers/gpu/drm/bridge/dw_hdmi.h b/drivers/gpu/drm/bridge/dw-hdmi.h index fc9a560429d6..fc9a560429d6 100644 --- a/drivers/gpu/drm/bridge/dw_hdmi.h +++ b/drivers/gpu/drm/bridge/dw-hdmi.h diff --git a/drivers/gpu/drm/drm_mipi_dsi.c b/drivers/gpu/drm/drm_mipi_dsi.c index 2d5ca8eec13a..6e6a9c58d404 100644 --- a/drivers/gpu/drm/drm_mipi_dsi.c +++ b/drivers/gpu/drm/drm_mipi_dsi.c @@ -365,6 +365,44 @@ int mipi_dsi_create_packet(struct mipi_dsi_packet *packet, } EXPORT_SYMBOL(mipi_dsi_create_packet); +/** + * mipi_dsi_shutdown_peripheral() - sends a Shutdown Peripheral command + * @dsi: DSI peripheral device + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_shutdown_peripheral(struct mipi_dsi_device *dsi) +{ + struct mipi_dsi_msg msg = { + .channel = dsi->channel, + .type = MIPI_DSI_SHUTDOWN_PERIPHERAL, + .tx_buf = (u8 [2]) { 0, 0 }, + .tx_len = 2, + }; + + return mipi_dsi_device_transfer(dsi, &msg); +} +EXPORT_SYMBOL(mipi_dsi_shutdown_peripheral); + +/** + * mipi_dsi_turn_on_peripheral() - sends a Turn On Peripheral command + * @dsi: DSI peripheral device + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_turn_on_peripheral(struct mipi_dsi_device *dsi) +{ + struct mipi_dsi_msg msg = { + .channel = dsi->channel, + .type = MIPI_DSI_TURN_ON_PERIPHERAL, + .tx_buf = (u8 [2]) { 0, 0 }, + .tx_len = 2, + }; + + return mipi_dsi_device_transfer(dsi, &msg); +} +EXPORT_SYMBOL(mipi_dsi_turn_on_peripheral); + /* * mipi_dsi_set_maximum_return_packet_size() - specify the maximum size of the * the payload in a long packet transmitted from the peripheral back to the diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig index 7d4704b1292b..1500ab99f548 100644 --- a/drivers/gpu/drm/panel/Kconfig +++ b/drivers/gpu/drm/panel/Kconfig @@ -31,6 +31,16 @@ config DRM_PANEL_LG_LG4573 Say Y here if you want to enable support for LG4573 RGB panel. To compile this driver as a module, choose M here. +config DRM_PANEL_PANASONIC_VVX10F034N00 + tristate "Panasonic VVX10F034N00 1920x1200 video mode panel" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + help + Say Y here if you want to enable support for Panasonic VVX10F034N00 + WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some + Xperia Z2 tablets + config DRM_PANEL_SAMSUNG_S6E8AA0 tristate "Samsung S6E8AA0 DSI video mode panel" depends on OF @@ -51,4 +61,13 @@ config DRM_PANEL_SHARP_LQ101R1SX01 To compile this driver as a module, choose M here: the module will be called panel-sharp-lq101r1sx01. +config DRM_PANEL_SHARP_LS043T1LE01 + tristate "Sharp LS043T1LE01 qHD video mode panel" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + help + Say Y here if you want to enable support for Sharp LS043T1LE01 qHD + (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard + endmenu diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile index d0f016dd7ddb..f277eed933d6 100644 --- a/drivers/gpu/drm/panel/Makefile +++ b/drivers/gpu/drm/panel/Makefile @@ -1,5 +1,7 @@ obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o +obj-$(CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00) += panel-panasonic-vvx10f034n00.o obj-$(CONFIG_DRM_PANEL_SAMSUNG_LD9040) += panel-samsung-ld9040.o obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0) += panel-samsung-s6e8aa0.o obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o +obj-$(CONFIG_DRM_PANEL_SHARP_LS043T1LE01) += panel-sharp-ls043t1le01.o diff --git a/drivers/gpu/drm/panel/panel-panasonic-vvx10f034n00.c b/drivers/gpu/drm/panel/panel-panasonic-vvx10f034n00.c new file mode 100644 index 000000000000..7f915f706fa6 --- /dev/null +++ b/drivers/gpu/drm/panel/panel-panasonic-vvx10f034n00.c @@ -0,0 +1,334 @@ +/* + * Copyright (C) 2015 Red Hat + * Copyright (C) 2015 Sony Mobile Communications Inc. + * Author: Werner Johansson <werner.johansson@sonymobile.com> + * + * Based on AUO panel driver by Rob Clark <robdclark@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/backlight.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/regulator/consumer.h> + +#include <drm/drmP.h> +#include <drm/drm_crtc.h> +#include <drm/drm_mipi_dsi.h> +#include <drm/drm_panel.h> + +#include <video/mipi_display.h> + +/* + * When power is turned off to this panel a minimum off time of 500ms has to be + * observed before powering back on as there's no external reset pin. Keep + * track of earliest wakeup time and delay subsequent prepare call accordingly + */ +#define MIN_POFF_MS (500) + +struct wuxga_nt_panel { + struct drm_panel base; + struct mipi_dsi_device *dsi; + + struct backlight_device *backlight; + struct regulator *supply; + + bool prepared; + bool enabled; + + ktime_t earliest_wake; + + const struct drm_display_mode *mode; +}; + +static inline struct wuxga_nt_panel *to_wuxga_nt_panel(struct drm_panel *panel) +{ + return container_of(panel, struct wuxga_nt_panel, base); +} + +static int wuxga_nt_panel_on(struct wuxga_nt_panel *wuxga_nt) +{ + struct mipi_dsi_device *dsi = wuxga_nt->dsi; + int ret; + + ret = mipi_dsi_turn_on_peripheral(dsi); + if (ret < 0) + return ret; + + return 0; +} + +static int wuxga_nt_panel_disable(struct drm_panel *panel) +{ + struct wuxga_nt_panel *wuxga_nt = to_wuxga_nt_panel(panel); + + if (!wuxga_nt->enabled) + return 0; + + mipi_dsi_shutdown_peripheral(wuxga_nt->dsi); + + if (wuxga_nt->backlight) { + wuxga_nt->backlight->props.power = FB_BLANK_POWERDOWN; + wuxga_nt->backlight->props.state |= BL_CORE_FBBLANK; + backlight_update_status(wuxga_nt->backlight); + } + + wuxga_nt->enabled = false; + + return 0; +} + +static int wuxga_nt_panel_unprepare(struct drm_panel *panel) +{ + struct wuxga_nt_panel *wuxga_nt = to_wuxga_nt_panel(panel); + + if (!wuxga_nt->prepared) + return 0; + + regulator_disable(wuxga_nt->supply); + wuxga_nt->earliest_wake = ktime_add_ms(ktime_get_real(), MIN_POFF_MS); + wuxga_nt->prepared = false; + + return 0; +} + +static int wuxga_nt_panel_prepare(struct drm_panel *panel) +{ + struct wuxga_nt_panel *wuxga_nt = to_wuxga_nt_panel(panel); + int ret; + s64 enablewait; + + if (wuxga_nt->prepared) + return 0; + + /* + * If the user re-enabled the panel before the required off-time then + * we need to wait the remaining period before re-enabling regulator + */ + enablewait = ktime_ms_delta(wuxga_nt->earliest_wake, ktime_get_real()); + + /* Sanity check, this should never happen */ + if (enablewait > MIN_POFF_MS) + enablewait = MIN_POFF_MS; + + if (enablewait > 0) + msleep(enablewait); + + ret = regulator_enable(wuxga_nt->supply); + if (ret < 0) + return ret; + + /* + * A minimum delay of 250ms is required after power-up until commands + * can be sent + */ + msleep(250); + + ret = wuxga_nt_panel_on(wuxga_nt); + if (ret < 0) { + dev_err(panel->dev, "failed to set panel on: %d\n", ret); + goto poweroff; + } + + wuxga_nt->prepared = true; + + return 0; + +poweroff: + regulator_disable(wuxga_nt->supply); + + return ret; +} + +static int wuxga_nt_panel_enable(struct drm_panel *panel) +{ + struct wuxga_nt_panel *wuxga_nt = to_wuxga_nt_panel(panel); + + if (wuxga_nt->enabled) + return 0; + + if (wuxga_nt->backlight) { + wuxga_nt->backlight->props.power = FB_BLANK_UNBLANK; + wuxga_nt->backlight->props.state &= ~BL_CORE_FBBLANK; + backlight_update_status(wuxga_nt->backlight); + } + + wuxga_nt->enabled = true; + + return 0; +} + +static const struct drm_display_mode default_mode = { + .clock = 164402, + .hdisplay = 1920, + .hsync_start = 1920 + 152, + .hsync_end = 1920 + 152 + 52, + .htotal = 1920 + 152 + 52 + 20, + .vdisplay = 1200, + .vsync_start = 1200 + 24, + .vsync_end = 1200 + 24 + 6, + .vtotal = 1200 + 24 + 6 + 48, + .vrefresh = 60, +}; + +static int wuxga_nt_panel_get_modes(struct drm_panel *panel) +{ + struct drm_display_mode *mode; + + mode = drm_mode_duplicate(panel->drm, &default_mode); + if (!mode) { + dev_err(panel->drm->dev, "failed to add mode %ux%ux@%u\n", + default_mode.hdisplay, default_mode.vdisplay, + default_mode.vrefresh); + return -ENOMEM; + } + + drm_mode_set_name(mode); + + drm_mode_probed_add(panel->connector, mode); + + panel->connector->display_info.width_mm = 217; + panel->connector->display_info.height_mm = 136; + + return 1; +} + +static const struct drm_panel_funcs wuxga_nt_panel_funcs = { + .disable = wuxga_nt_panel_disable, + .unprepare = wuxga_nt_panel_unprepare, + .prepare = wuxga_nt_panel_prepare, + .enable = wuxga_nt_panel_enable, + .get_modes = wuxga_nt_panel_get_modes, +}; + +static const struct of_device_id wuxga_nt_of_match[] = { + { .compatible = "panasonic,vvx10f034n00", }, + { } +}; +MODULE_DEVICE_TABLE(of, wuxga_nt_of_match); + +static int wuxga_nt_panel_add(struct wuxga_nt_panel *wuxga_nt) +{ + struct device *dev = &wuxga_nt->dsi->dev; + struct device_node *np; + int ret; + + wuxga_nt->mode = &default_mode; + + wuxga_nt->supply = devm_regulator_get(dev, "power"); + if (IS_ERR(wuxga_nt->supply)) + return PTR_ERR(wuxga_nt->supply); + + np = of_parse_phandle(dev->of_node, "backlight", 0); + if (np) { + wuxga_nt->backlight = of_find_backlight_by_node(np); + of_node_put(np); + + if (!wuxga_nt->backlight) + return -EPROBE_DEFER; + } + + drm_panel_init(&wuxga_nt->base); + wuxga_nt->base.funcs = &wuxga_nt_panel_funcs; + wuxga_nt->base.dev = &wuxga_nt->dsi->dev; + + ret = drm_panel_add(&wuxga_nt->base); + if (ret < 0) + goto put_backlight; + + return 0; + +put_backlight: + if (wuxga_nt->backlight) + put_device(&wuxga_nt->backlight->dev); + + return ret; +} + +static void wuxga_nt_panel_del(struct wuxga_nt_panel *wuxga_nt) +{ + if (wuxga_nt->base.dev) + drm_panel_remove(&wuxga_nt->base); + + if (wuxga_nt->backlight) + put_device(&wuxga_nt->backlight->dev); +} + +static int wuxga_nt_panel_probe(struct mipi_dsi_device *dsi) +{ + struct wuxga_nt_panel *wuxga_nt; + int ret; + + dsi->lanes = 4; + dsi->format = MIPI_DSI_FMT_RGB888; + dsi->mode_flags = MIPI_DSI_MODE_VIDEO | + MIPI_DSI_MODE_VIDEO_HSE | + MIPI_DSI_CLOCK_NON_CONTINUOUS | + MIPI_DSI_MODE_LPM; + + wuxga_nt = devm_kzalloc(&dsi->dev, sizeof(*wuxga_nt), GFP_KERNEL); + if (!wuxga_nt) + return -ENOMEM; + + mipi_dsi_set_drvdata(dsi, wuxga_nt); + + wuxga_nt->dsi = dsi; + + ret = wuxga_nt_panel_add(wuxga_nt); + if (ret < 0) + return ret; + + return mipi_dsi_attach(dsi); +} + +static int wuxga_nt_panel_remove(struct mipi_dsi_device *dsi) +{ + struct wuxga_nt_panel *wuxga_nt = mipi_dsi_get_drvdata(dsi); + int ret; + + ret = wuxga_nt_panel_disable(&wuxga_nt->base); + if (ret < 0) + dev_err(&dsi->dev, "failed to disable panel: %d\n", ret); + + ret = mipi_dsi_detach(dsi); + if (ret < 0) + dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", ret); + + drm_panel_detach(&wuxga_nt->base); + wuxga_nt_panel_del(wuxga_nt); + + return 0; +} + +static void wuxga_nt_panel_shutdown(struct mipi_dsi_device *dsi) +{ + struct wuxga_nt_panel *wuxga_nt = mipi_dsi_get_drvdata(dsi); + + wuxga_nt_panel_disable(&wuxga_nt->base); +} + +static struct mipi_dsi_driver wuxga_nt_panel_driver = { + .driver = { + .name = "panel-panasonic-vvx10f034n00", + .of_match_table = wuxga_nt_of_match, + }, + .probe = wuxga_nt_panel_probe, + .remove = wuxga_nt_panel_remove, + .shutdown = wuxga_nt_panel_shutdown, +}; +module_mipi_dsi_driver(wuxga_nt_panel_driver); + +MODULE_AUTHOR("Werner Johansson <werner.johansson@sonymobile.com>"); +MODULE_DESCRIPTION("Panasonic VVX10F034N00 Novatek NT1397-based WUXGA (1920x1200) video mode panel driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpu/drm/panel/panel-sharp-ls043t1le01.c b/drivers/gpu/drm/panel/panel-sharp-ls043t1le01.c new file mode 100644 index 000000000000..3aeb0bda4947 --- /dev/null +++ b/drivers/gpu/drm/panel/panel-sharp-ls043t1le01.c @@ -0,0 +1,387 @@ +/* + * Copyright (C) 2015 Red Hat + * Copyright (C) 2015 Sony Mobile Communications Inc. + * Author: Werner Johansson <werner.johansson@sonymobile.com> + * + * Based on AUO panel driver by Rob Clark <robdclark@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/backlight.h> +#include <linux/gpio/consumer.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/regulator/consumer.h> + +#include <drm/drmP.h> +#include <drm/drm_crtc.h> +#include <drm/drm_mipi_dsi.h> +#include <drm/drm_panel.h> + +#include <video/mipi_display.h> + +struct sharp_nt_panel { + struct drm_panel base; + struct mipi_dsi_device *dsi; + + struct backlight_device *backlight; + struct regulator *supply; + struct gpio_desc *reset_gpio; + + bool prepared; + bool enabled; + + const struct drm_display_mode *mode; +}; + +static inline struct sharp_nt_panel *to_sharp_nt_panel(struct drm_panel *panel) +{ + return container_of(panel, struct sharp_nt_panel, base); +} + +static int sharp_nt_panel_init(struct sharp_nt_panel *sharp_nt) +{ + struct mipi_dsi_device *dsi = sharp_nt->dsi; + int ret; + + dsi->mode_flags |= MIPI_DSI_MODE_LPM; + + ret = mipi_dsi_dcs_exit_sleep_mode(dsi); + if (ret < 0) + return ret; + + msleep(120); + + /* Novatek two-lane operation */ + ret = mipi_dsi_dcs_write(dsi, 0xae, (u8[]){ 0x03 }, 1); + if (ret < 0) + return ret; + + /* Set both MCU and RGB I/F to 24bpp */ + ret = mipi_dsi_dcs_set_pixel_format(dsi, MIPI_DCS_PIXEL_FMT_24BIT | + (MIPI_DCS_PIXEL_FMT_24BIT << 4)); + if (ret < 0) + return ret; + + return 0; +} + +static int sharp_nt_panel_on(struct sharp_nt_panel *sharp_nt) +{ + struct mipi_dsi_device *dsi = sharp_nt->dsi; + int ret; + + dsi->mode_flags |= MIPI_DSI_MODE_LPM; + + ret = mipi_dsi_dcs_set_display_on(dsi); + if (ret < 0) + return ret; + + return 0; +} + +static int sharp_nt_panel_off(struct sharp_nt_panel *sharp_nt) +{ + struct mipi_dsi_device *dsi = sharp_nt->dsi; + int ret; + + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; + + ret = mipi_dsi_dcs_set_display_off(dsi); + if (ret < 0) + return ret; + + ret = mipi_dsi_dcs_enter_sleep_mode(dsi); + if (ret < 0) + return ret; + + return 0; +} + + +static int sharp_nt_panel_disable(struct drm_panel *panel) +{ + struct sharp_nt_panel *sharp_nt = to_sharp_nt_panel(panel); + + if (!sharp_nt->enabled) + return 0; + + if (sharp_nt->backlight) { + sharp_nt->backlight->props.power = FB_BLANK_POWERDOWN; + backlight_update_status(sharp_nt->backlight); + } + + sharp_nt->enabled = false; + + return 0; +} + +static int sharp_nt_panel_unprepare(struct drm_panel *panel) +{ + struct sharp_nt_panel *sharp_nt = to_sharp_nt_panel(panel); + int ret; + + if (!sharp_nt->prepared) + return 0; + + ret = sharp_nt_panel_off(sharp_nt); + if (ret < 0) { + dev_err(panel->dev, "failed to set panel off: %d\n", ret); + return ret; + } + + regulator_disable(sharp_nt->supply); + if (sharp_nt->reset_gpio) + gpiod_set_value(sharp_nt->reset_gpio, 0); + + sharp_nt->prepared = false; + + return 0; +} + +static int sharp_nt_panel_prepare(struct drm_panel *panel) +{ + struct sharp_nt_panel *sharp_nt = to_sharp_nt_panel(panel); + int ret; + + if (sharp_nt->prepared) + return 0; + + ret = regulator_enable(sharp_nt->supply); + if (ret < 0) + return ret; + + msleep(20); + + if (sharp_nt->reset_gpio) { + gpiod_set_value(sharp_nt->reset_gpio, 1); + msleep(1); + gpiod_set_value(sharp_nt->reset_gpio, 0); + msleep(1); + gpiod_set_value(sharp_nt->reset_gpio, 1); + msleep(10); + } + + ret = sharp_nt_panel_init(sharp_nt); + if (ret < 0) { + dev_err(panel->dev, "failed to init panel: %d\n", ret); + goto poweroff; + } + + ret = sharp_nt_panel_on(sharp_nt); + if (ret < 0) { + dev_err(panel->dev, "failed to set panel on: %d\n", ret); + goto poweroff; + } + + sharp_nt->prepared = true; + + return 0; + +poweroff: + regulator_disable(sharp_nt->supply); + if (sharp_nt->reset_gpio) + gpiod_set_value(sharp_nt->reset_gpio, 0); + return ret; +} + +static int sharp_nt_panel_enable(struct drm_panel *panel) +{ + struct sharp_nt_panel *sharp_nt = to_sharp_nt_panel(panel); + + if (sharp_nt->enabled) + return 0; + + if (sharp_nt->backlight) { + sharp_nt->backlight->props.power = FB_BLANK_UNBLANK; + backlight_update_status(sharp_nt->backlight); + } + + sharp_nt->enabled = true; + + return 0; +} + +static const struct drm_display_mode default_mode = { + .clock = 41118, + .hdisplay = 540, + .hsync_start = 540 + 48, + .hsync_end = 540 + 48 + 80, + .htotal = 540 + 48 + 80 + 32, + .vdisplay = 960, + .vsync_start = 960 + 3, + .vsync_end = 960 + 3 + 15, + .vtotal = 960 + 3 + 15 + 1, + .vrefresh = 60, +}; + +static int sharp_nt_panel_get_modes(struct drm_panel *panel) +{ + struct drm_display_mode *mode; + + mode = drm_mode_duplicate(panel->drm, &default_mode); + if (!mode) { + dev_err(panel->drm->dev, "failed to add mode %ux%ux@%u\n", + default_mode.hdisplay, default_mode.vdisplay, + default_mode.vrefresh); + return -ENOMEM; + } + + drm_mode_set_name(mode); + + drm_mode_probed_add(panel->connector, mode); + + panel->connector->display_info.width_mm = 54; + panel->connector->display_info.height_mm = 95; + + return 1; +} + +static const struct drm_panel_funcs sharp_nt_panel_funcs = { + .disable = sharp_nt_panel_disable, + .unprepare = sharp_nt_panel_unprepare, + .prepare = sharp_nt_panel_prepare, + .enable = sharp_nt_panel_enable, + .get_modes = sharp_nt_panel_get_modes, +}; + +static int sharp_nt_panel_add(struct sharp_nt_panel *sharp_nt) +{ + struct device *dev = &sharp_nt->dsi->dev; + struct device_node *np; + int ret; + + sharp_nt->mode = &default_mode; + + sharp_nt->supply = devm_regulator_get(dev, "avdd"); + if (IS_ERR(sharp_nt->supply)) + return PTR_ERR(sharp_nt->supply); + + sharp_nt->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(sharp_nt->reset_gpio)) { + dev_err(dev, "cannot get reset-gpios %ld\n", + PTR_ERR(sharp_nt->reset_gpio)); + sharp_nt->reset_gpio = NULL; + } else { + gpiod_set_value(sharp_nt->reset_gpio, 0); + } + + np = of_parse_phandle(dev->of_node, "backlight", 0); + if (np) { + sharp_nt->backlight = of_find_backlight_by_node(np); + of_node_put(np); + + if (!sharp_nt->backlight) + return -EPROBE_DEFER; + } + + drm_panel_init(&sharp_nt->base); + sharp_nt->base.funcs = &sharp_nt_panel_funcs; + sharp_nt->base.dev = &sharp_nt->dsi->dev; + + ret = drm_panel_add(&sharp_nt->base); + if (ret < 0) + goto put_backlight; + + return 0; + +put_backlight: + if (sharp_nt->backlight) + put_device(&sharp_nt->backlight->dev); + + return ret; +} |