diff options
78 files changed, 822 insertions, 540 deletions
diff --git a/Documentation/devicetree/bindings/arm/sunxi.txt b/Documentation/devicetree/bindings/arm/sunxi.txt index e4beec3d9ad3..f9ddc05d32f0 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.txt +++ b/Documentation/devicetree/bindings/arm/sunxi.txt @@ -18,4 +18,5 @@ using one of the following compatible strings: allwinner,sun8i-v3s allwinner,sun9i-a80 allwinner,sun50i-a64 + allwinner,suniv-f1c100s nextthing,gr8 diff --git a/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt b/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt index ed11ce0ac836..46055254e8dd 100644 --- a/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt @@ -6,6 +6,7 @@ Required properties: "allwinner,sun4i-a10-wdt" "allwinner,sun6i-a31-wdt" "allwinner,sun50i-a64-wdt","allwinner,sun6i-a31-wdt" + "allwinner,suniv-f1c100s-wdt", "allwinner,sun4i-a10-wdt" - reg : Specifies base physical address and size of the registers. Optional properties: diff --git a/MAINTAINERS b/MAINTAINERS index 7d37f8a4743c..046dad9636e8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1306,7 +1306,6 @@ F: include/dt-bindings/clock/gxbb* F: Documentation/devicetree/bindings/clock/amlogic* ARM/Amlogic Meson SoC support -M: Carlo Caione <carlo@caione.org> M: Kevin Hilman <khilman@baylibre.com> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) L: linux-amlogic@lists.infradead.org @@ -1317,6 +1316,7 @@ F: arch/arm/boot/dts/meson* F: arch/arm64/boot/dts/amlogic/ F: drivers/pinctrl/meson/ F: drivers/mmc/host/meson* +F: drivers/soc/amlogic/ N: meson ARM/Amlogic Meson SoC Sound Drivers diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index d6a49f59ecd9..6d6e0330930b 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -1087,14 +1087,21 @@ choice Say Y here if you want kernel low-level debugging support on SOCFPGA(Cyclone 5 and Arria 5) based platforms. - config DEBUG_SOCFPGA_UART1 + config DEBUG_SOCFPGA_ARRIA10_UART1 depends on ARCH_SOCFPGA - bool "Use SOCFPGA UART1 for low-level debug" + bool "Use SOCFPGA Arria10 UART1 for low-level debug" select DEBUG_UART_8250 help Say Y here if you want kernel low-level debugging support on SOCFPGA(Arria 10) based platforms. + config DEBUG_SOCFPGA_CYCLONE5_UART1 + depends on ARCH_SOCFPGA + bool "Use SOCFPGA Cyclone 5 UART1 for low-level debug" + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on SOCFPGA(Cyclone 5 and Arria 5) based platforms. config DEBUG_SUN9I_UART0 bool "Kernel low-level debugging messages via sun9i UART0" @@ -1192,6 +1199,28 @@ choice If unsure, say N. + config STM32F4_DEBUG_UART + bool "Use STM32F4 UART for low-level debug" + depends on ARCH_STM32 + select DEBUG_STM32_UART + help + Say Y here if you want kernel low-level debugging support + on STM32F4 based platforms, which default UART is wired on + USART1. + + If unsure, say N. + + config STM32F7_DEBUG_UART + bool "Use STM32F7 UART for low-level debug" + depends on ARCH_STM32 + select DEBUG_STM32_UART + help + Say Y here if you want kernel low-level debugging support + on STM32F7 based platforms, which default UART is wired on + USART1. + + If unsure, say N. + config TEGRA_DEBUG_UART_AUTO_ODMDATA bool "Kernel low-level debugging messages via Tegra UART via ODMDATA" depends on ARCH_TEGRA @@ -1440,21 +1469,21 @@ config DEBUG_OMAP2PLUS_UART depends on ARCH_OMAP2PLUS config DEBUG_IMX_UART_PORT - int "i.MX Debug UART Port Selection" if DEBUG_IMX1_UART || \ - DEBUG_IMX25_UART || \ - DEBUG_IMX21_IMX27_UART || \ - DEBUG_IMX31_UART || \ - DEBUG_IMX35_UART || \ - DEBUG_IMX50_UART || \ - DEBUG_IMX51_UART || \ - DEBUG_IMX53_UART || \ - DEBUG_IMX6Q_UART || \ - DEBUG_IMX6SL_UART || \ - DEBUG_IMX6SX_UART || \ - DEBUG_IMX6UL_UART || \ - DEBUG_IMX7D_UART + int "i.MX Debug UART Port Selection" + depends on DEBUG_IMX1_UART || \ + DEBUG_IMX25_UART || \ + DEBUG_IMX21_IMX27_UART || \ + DEBUG_IMX31_UART || \ + DEBUG_IMX35_UART || \ + DEBUG_IMX50_UART || \ + DEBUG_IMX51_UART || \ + DEBUG_IMX53_UART || \ + DEBUG_IMX6Q_UART || \ + DEBUG_IMX6SL_UART || \ + DEBUG_IMX6SX_UART || \ + DEBUG_IMX6UL_UART || \ + DEBUG_IMX7D_UART default 1 - depends on ARCH_MXC help Choose UART port on which kernel low-level debug messages should be output. @@ -1476,6 +1505,10 @@ config DEBUG_STI_UART bool depends on ARCH_STI +config DEBUG_STM32_UART + bool + depends on ARCH_STM32 + config DEBUG_SIRFSOC_UART bool depends on ARCH_SIRF @@ -1525,6 +1558,7 @@ config DEBUG_LL_INCLUDE default "debug/s5pv210.S" if DEBUG_S5PV210_UART default "debug/sirf.S" if DEBUG_SIRFSOC_UART default "debug/sti.S" if DEBUG_STI_UART + default "debug/stm32.S" if DEBUG_STM32_UART default "debug/tegra.S" if DEBUG_TEGRA_UART default "debug/ux500.S" if DEBUG_UX500_UART default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT @@ -1655,7 +1689,8 @@ config DEBUG_UART_PHYS default 0xfe800000 if ARCH_IOP32X default 0xff690000 if DEBUG_RK32_UART2 default 0xffc02000 if DEBUG_SOCFPGA_UART0 - default 0xffc02100 if DEBUG_SOCFPGA_UART1 + default 0xffc02100 if DEBUG_SOCFPGA_ARRIA10_UART1 + default 0xffc03000 if DEBUG_SOCFPGA_CYCLONE5_UART1 default 0xffd82340 if ARCH_IOP13XX default 0xffe40000 if DEBUG_RCAR_GEN1_SCIF0 default 0xffe42000 if DEBUG_RCAR_GEN1_SCIF2 @@ -1762,7 +1797,8 @@ config DEBUG_UART_VIRT default 0xfeb30c00 if DEBUG_KEYSTONE_UART0 default 0xfeb31000 if DEBUG_KEYSTONE_UART1 default 0xfec02000 if DEBUG_SOCFPGA_UART0 - default 0xfec02100 if DEBUG_SOCFPGA_UART1 + default 0xfec02100 if DEBUG_SOCFPGA_ARRIA10_UART1 + default 0xfec03000 if DEBUG_SOCFPGA_CYCLONE5_UART1 default 0xfec12000 if (DEBUG_MVEBU_UART0 || DEBUG_MVEBU_UART0_ALTERNATE) && ARCH_MVEBU default 0xfec12100 if DEBUG_MVEBU_UART1_ALTERNATE default 0xfec10000 if DEBUG_SIRFATLAS7_UART0 @@ -1811,9 +1847,9 @@ config DEBUG_UART_8250_WORD depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 depends on DEBUG_UART_8250_SHIFT >= 2 default y if DEBUG_PICOXCELL_UART || \ - DEBUG_SOCFPGA_UART0 || DEBUG_SOCFPGA_UART1 || \ - DEBUG_KEYSTONE_UART0 || DEBUG_KEYSTONE_UART1 || \ - DEBUG_ALPINE_UART0 || \ + DEBUG_SOCFPGA_UART0 || DEBUG_SOCFPGA_ARRIA10_UART1 || \ + DEBUG_SOCFPGA_CYCLONE5_UART1 || DEBUG_KEYSTONE_UART0 || \ + DEBUG_KEYSTONE_UART1 || DEBUG_ALPINE_UART0 || \ DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \ DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_BCM_IPROC_UART3 || \ DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2 diff --git a/arch/arm/boot/dts/am335x-pdu001.dts b/arch/arm/boot/dts/am335x-pdu001.dts index 6dd9d487aaeb..ae43d61f4e8b 100644 --- a/arch/arm/boot/dts/am335x-pdu001.dts +++ b/arch/arm/boot/dts/am335x-pdu001.dts @@ -585,7 +585,7 @@ bus-width = <4>; pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins>; - cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; + cd-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; }; &sham { diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 490726b52216..9dc7ec7655cb 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -33,6 +33,7 @@ gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>; /* gpio line 48 */ enable-active-high; regulator-boot-on; + startup-delay-us = <25000>; }; vbat: fixedregulator-vbat { diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index bf7ca00f4c21..bc853ebeda22 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -701,6 +701,7 @@ }; &dwc3 { + extcon = <&extcon_usb3>; dr_mode = "otg"; }; diff --git a/arch/arm/include/debug/brcmstb.S b/arch/arm/include/debug/brcmstb.S index 0f580caa81e5..bf8702ee8f86 100644 --- a/arch/arm/include/debug/brcmstb.S +++ b/arch/arm/include/debug/brcmstb.S @@ -26,8 +26,9 @@ #define UARTA_3390 REG_PHYS_ADDR(0x40a900) #define UARTA_7250 REG_PHYS_ADDR(0x40b400) -#define UARTA_7260 REG_PHYS_ADDR(0x40c000) -#define UARTA_7268 UARTA_7260 +#define UARTA_7255 REG_PHYS_ADDR(0x40c000) +#define UARTA_7260 UARTA_7255 +#define UARTA_7268 UARTA_7255 #define UARTA_7271 UARTA_7268 #define UARTA_7278 REG_PHYS_ADDR_V7(0x40c000) #define UARTA_7364 REG_PHYS_ADDR(0x40b000) @@ -82,15 +83,16 @@ ARM_BE8( rev \rv, \rv ) /* Chip specific detection starts here */ 20: checkuart(\rp, \rv, 0x33900000, 3390) 21: checkuart(\rp, \rv, 0x72500000, 7250) -22: checkuart(\rp, \rv, 0x72600000, 7260) -23: checkuart(\rp, \rv, 0x72680000, 7268) -24: checkuart(\rp, \rv, 0x72710000, 7271) -25: checkuart(\rp, \rv, 0x73640000, 7364) -26: checkuart(\rp, \rv, 0x73660000, 7366) -27: checkuart(\rp, \rv, 0x07437100, 74371) -28: checkuart(\rp, \rv, 0x74390000, 7439) -29: checkuart(\rp, \rv, 0x74450000, 7445) -30: checkuart(\rp, \rv, 0x72780000, 7278) +22: checkuart(\rp, \rv, 0x72550000, 7255) +23: checkuart(\rp, \rv, 0x72600000, 7260) +24: checkuart(\rp, \rv, 0x72680000, 7268) +25: checkuart(\rp, \rv, 0x72710000, 7271) +26: checkuart(\rp, \rv, 0x72780000, 7278) +27: checkuart(\rp, \rv, 0x73640000, 7364) +28: checkuart(\rp, \rv, 0x73660000, 7366) +29: checkuart(\rp, \rv, 0x07437100, 74371) +30: checkuart(\rp, \rv, 0x74390000, 7439) +31: checkuart(\rp, \rv, 0x74450000, 7445) /* No valid UART found */ 90: mov \rp, #0 diff --git a/arch/arm/include/debug/stm32.S b/arch/arm/include/debug/stm32.S new file mode 100644 index 000000000000..1abb32f685fd --- /dev/null +++ b/arch/arm/include/debug/stm32.S @@ -0,0 +1,41 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) STMicroelectronics SA 2017 - All Rights Reserved + * Author: Gerald Baeza <gerald.baeza@st.com> for STMicroelectronics. + */ + +#define STM32_UART_BASE 0x40011000 /* USART1 */ + +#ifdef CONFIG_STM32F4_DEBUG_UART +#define STM32_USART_SR_OFF 0x00 +#define STM32_USART_TDR_OFF 0x04 +#endif + +#ifdef CONFIG_STM32F7_DEBUG_UART +#define STM32_USART_SR_OFF 0x1C +#define STM32_USART_TDR_OFF 0x28 +#endif + +#define STM32_USART_TC (1 << 6) /* Tx complete */ +#define STM32_USART_TXE (1 << 7) /* Tx data reg empty */ + +.macro addruart, rp, rv, tmp + ldr \rp, =STM32_UART_BASE @ physical base + ldr \rv, =STM32_UART_BASE @ virt base /* NoMMU */ +.endm + +.macro senduart,rd,rx + strb \rd, [\rx, #STM32_USART_TDR_OFF] +.endm + +.macro waituart,rd,rx +1001: ldr \rd, [\rx, #(STM32_USART_SR_OFF)] @ Read Status Register + tst \rd, #STM32_USART_TXE @ TXE = 1 = tx empty + beq 1001b +.endm + +.macro busyuart,rd,rx +1001: ldr \rd, [\rx, #(STM32_USART_SR_OFF)] @ Read Status Register + tst \rd, #STM32_USART_TC @ TC = 1 = tx complete + beq 1001b +.endm diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index a3f375af673d..a067adf9f1ee 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -189,6 +189,7 @@ config ARCH_BCM_63XX bool "Broadcom BCM63xx DSL SoC" depends on ARCH_MULTI_V7 depends on MMU + select ARCH_HAS_RESET_CONTROLLER select ARM_ERRATA_754322 select ARM_ERRATA_764369 if SMP select ARM_GIC diff --git a/arch/arm/mach-bcm/board_bcm2835.c b/arch/arm/mach-bcm/board_bcm2835.c index 8cff865ace04..bfc556f76720 100644 --- a/arch/arm/mach-bcm/board_bcm2835.c +++ b/arch/arm/mach-bcm/board_bcm2835.c @@ -1,15 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * Copyright (C) 2010 Broadcom - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/init.h> diff --git a/arch/arm/mach-bcm/platsmp.c b/arch/arm/mach-bcm/platsmp.c index 7d954830eb57..47f8053d0240 100644 --- a/arch/arm/mach-bcm/platsmp.c +++ b/arch/arm/mach-bcm/platsmp.c @@ -1,15 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright (C) 2014-2015 Broadcom Corporation * Copyright 2014 Linaro Limited - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/cpumask.h> diff --git a/arch/arm/mach-bcm/platsmp.h b/arch/arm/mach-bcm/platsmp.h index b8b8b3fa350d..e65bffad1d23 100644 --- a/arch/arm/mach-bcm/platsmp.h +++ b/arch/arm/mach-bcm/platsmp.h @@ -1,10 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (C) 2017 Stefan Wahren <stefan.wahren@i2se.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * */ extern const struct smp_operations bcm2836_smp_ops; diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index 7d8ab36ff83d..e52ec1619b70 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -30,6 +30,7 @@ #include <linux/platform_data/usb-davinci.h> #include <linux/platform_data/ti-aemif.h> #include <linux/regulator/machine.h> +#include <linux/nvmem-provider.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -435,6 +436,27 @@ static inline void da830_evm_init_lcdc(int mux_mode) static inline void da830_evm_init_lcdc(int mux_mode) { } #endif +static struct nvmem_cell_info da830_evm_nvmem_cells[] = { + { + .name = "macaddr", + .offset = 0x7f00, + .bytes = ETH_ALEN, + } +}; + +static struct nvmem_cell_table da830_evm_nvmem_cell_table = { + .nvmem_name = "1-00500", + .cells = da830_evm_nvmem_cells, + .ncells = ARRAY_SIZE(da830_evm_nvmem_cells), +}; + +static struct nvmem_cell_lookup da830_evm_nvmem_cell_lookup = { + .nvmem_name = "1-00500", + .cell_name = "macaddr", + .dev_id = "davinci_emac.1", + .con_id = "mac-address", +}; + static struct at24_platform_data da830_evm_i2c_eeprom_info = { .byte_len = SZ_256K / 8, .page_size = 64, @@ -620,6 +642,10 @@ static __init void da830_evm_init(void) __func__, ret); davinci_serial_init(da8xx_serial_device); + + nvmem_add_cell_table(&da830_evm_nvmem_cell_table); + nvmem_add_cell_lookups(&da830_evm_nvmem_cell_lookup, 1); + i2c_register_board_info(1, da830_evm_i2c_devices, ARRAY_SIZE(da830_evm_i2c_devices)); |