diff options
46 files changed, 3018 insertions, 5988 deletions
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 8b5f717b8c8c..0ac883777318 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -1674,6 +1674,12 @@ In such case C2/C3 won't be used again. idle=nomwait: Disable mwait for CPU C-states + idxd.sva= [HW] + Format: <bool> + Allow force disabling of Shared Virtual Memory (SVA) + support for the idxd driver. By default it is set to + true (1). + ieee754= [MIPS] Select IEEE Std 754 conformance mode Format: { strict | legacy | 2008 | relaxed } Default: strict diff --git a/Documentation/devicetree/bindings/dma/ingenic,dma.yaml b/Documentation/devicetree/bindings/dma/ingenic,dma.yaml index 6a2043721b95..ac4d59494fc8 100644 --- a/Documentation/devicetree/bindings/dma/ingenic,dma.yaml +++ b/Documentation/devicetree/bindings/dma/ingenic,dma.yaml @@ -17,6 +17,8 @@ properties: enum: - ingenic,jz4740-dma - ingenic,jz4725b-dma + - ingenic,jz4760-dma + - ingenic,jz4760b-dma - ingenic,jz4770-dma - ingenic,jz4780-dma - ingenic,x1000-dma diff --git a/Documentation/devicetree/bindings/dma/intel,ldma.yaml b/Documentation/devicetree/bindings/dma/intel,ldma.yaml new file mode 100644 index 000000000000..a5c4be783593 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/intel,ldma.yaml @@ -0,0 +1,116 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/intel,ldma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lightning Mountain centralized DMA controllers. + +maintainers: + - chuanhua.lei@intel.com + - mallikarjunax.reddy@intel.com + +allOf: + - $ref: "dma-controller.yaml#" + +properties: + compatible: + enum: + - intel,lgm-cdma + - intel,lgm-dma2tx + - intel,lgm-dma1rx + - intel,lgm-dma1tx + - intel,lgm-dma0tx + - intel,lgm-dma3 + - intel,lgm-toe-dma30 + - intel,lgm-toe-dma31 + + reg: + maxItems: 1 + + "#dma-cells": + const: 3 + description: + The first cell is the peripheral's DMA request line. + The second cell is the peripheral's (port) number corresponding to the channel. + The third cell is the burst length of the channel. + + dma-channels: + minimum: 1 + maximum: 16 + + dma-channel-mask: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + reset-names: + items: + - const: ctrl + + interrupts: + maxItems: 1 + + intel,dma-poll-cnt: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + DMA descriptor polling counter is used to control the poling mechanism + for the descriptor fetching for all channels. + + intel,dma-byte-en: + type: boolean + description: + DMA byte enable is only valid for DMA write(RX). + Byte enable(1) means DMA write will be based on the number of dwords + instead of the whole burst. + + intel,dma-drb: + type: boolean + description: + DMA descriptor read back to make sure data and desc synchronization. + + intel,dma-dburst-wr: + type: boolean + description: + Enable RX dynamic burst write. When it is enabled, the DMA does RX dynamic burst; + if it is disabled, the DMA RX will still support programmable fixed burst size of 2,4,8,16. + It only applies to RX DMA and memcopy DMA. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + dma0: dma-controller@e0e00000 { + compatible = "intel,lgm-cdma"; + reg = <0xe0e00000 0x1000>; + #dma-cells = <3>; + dma-channels = <16>; + dma-channel-mask = <0xFFFF>; + interrupt-parent = <&ioapic1>; + interrupts = <82 1>; + resets = <&rcu0 0x30 0>; + reset-names = "ctrl"; + clocks = <&cgu0 80>; + intel,dma-poll-cnt = <4>; + intel,dma-byte-en; + intel,dma-drb; + }; + - | + dma3: dma-controller@ec800000 { + compatible = "intel,lgm-dma3"; + reg = <0xec800000 0x1000>; + clocks = <&cgu0 71>; + resets = <&rcu0 0x10 9>; + #dma-cells = <3>; + intel,dma-poll-cnt = <16>; + intel,dma-byte-en; + intel,dma-dburst-wr; + }; diff --git a/Documentation/devicetree/bindings/dma/owl-dma.yaml b/Documentation/devicetree/bindings/dma/owl-dma.yaml index 256d62af2c64..93b4847554fb 100644 --- a/Documentation/devicetree/bindings/dma/owl-dma.yaml +++ b/Documentation/devicetree/bindings/dma/owl-dma.yaml @@ -8,8 +8,8 @@ title: Actions Semi Owl SoCs DMA controller description: | The OWL DMA is a general-purpose direct memory access controller capable of - supporting 10 and 12 independent DMA channels for S700 and S900 SoCs - respectively. + supporting 10 independent DMA channels for the Actions Semi S700 SoC and 12 + independent DMA channels for the S500 and S900 SoC variants. maintainers: - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> @@ -20,8 +20,9 @@ allOf: properties: compatible: enum: - - actions,s900-dma + - actions,s500-dma - actions,s700-dma + - actions,s900-dma reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml index c07eb6f2fc8d..7f2a54bc732d 100644 --- a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml +++ b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml @@ -14,34 +14,37 @@ allOf: properties: compatible: - items: - - enum: - - renesas,dmac-r8a7742 # RZ/G1H - - renesas,dmac-r8a7743 # RZ/G1M - - renesas,dmac-r8a7744 # RZ/G1N - - renesas,dmac-r8a7745 # RZ/G1E - - renesas,dmac-r8a77470 # RZ/G1C - - renesas,dmac-r8a774a1 # RZ/G2M - - renesas,dmac-r8a774b1 # RZ/G2N - - renesas,dmac-r8a774c0 # RZ/G2E - - renesas,dmac-r8a774e1 # RZ/G2H - - renesas,dmac-r8a7790 # R-Car H2 - - renesas,dmac-r8a7791 # R-Car M2-W - - renesas,dmac-r8a7792 # R-Car V2H - - renesas,dmac-r8a7793 # R-Car M2-N - - renesas,dmac-r8a7794 # R-Car E2 - - renesas,dmac-r8a7795 # R-Car H3 - - renesas,dmac-r8a7796 # R-Car M3-W - - renesas,dmac-r8a77961 # R-Car M3-W+ - - renesas,dmac-r8a77965 # R-Car M3-N - - renesas,dmac-r8a77970 # R-Car V3M - - renesas,dmac-r8a77980 # R-Car V3H - - renesas,dmac-r8a77990 # R-Car E3 - - renesas,dmac-r8a77995 # R-Car D3 - - const: renesas,rcar-dmac - - reg: - maxItems: 1 + oneOf: + - items: + - enum: + - renesas,dmac-r8a7742 # RZ/G1H + - renesas,dmac-r8a7743 # RZ/G1M + - renesas,dmac-r8a7744 # RZ/G1N + - renesas,dmac-r8a7745 # RZ/G1E + - renesas,dmac-r8a77470 # RZ/G1C + - renesas,dmac-r8a774a1 # RZ/G2M + - renesas,dmac-r8a774b1 # RZ/G2N + - renesas,dmac-r8a774c0 # RZ/G2E + - renesas,dmac-r8a774e1 # RZ/G2H + - renesas,dmac-r8a7790 # R-Car H2 + - renesas,dmac-r8a7791 # R-Car M2-W + - renesas,dmac-r8a7792 # R-Car V2H + - renesas,dmac-r8a7793 # R-Car M2-N + - renesas,dmac-r8a7794 # R-Car E2 + - renesas,dmac-r8a7795 # R-Car H3 + - renesas,dmac-r8a7796 # R-Car M3-W + - renesas,dmac-r8a77961 # R-Car M3-W+ + - renesas,dmac-r8a77965 # R-Car M3-N + - renesas,dmac-r8a77970 # R-Car V3M + - renesas,dmac-r8a77980 # R-Car V3H + - renesas,dmac-r8a77990 # R-Car E3 + - renesas,dmac-r8a77995 # R-Car D3 + - const: renesas,rcar-dmac + + - items: + - const: renesas,dmac-r8a779a0 # R-Car V3U + + reg: true interrupts: minItems: 9 @@ -110,6 +113,23 @@ required: - power-domains - resets +if: + properties: + compatible: + contains: + enum: + - renesas,dmac-r8a779a0 +then: + properties: + reg: + items: + - description: Base register block + - description: Channel register block +else: + properties: + reg: + maxItems: 1 + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/dma/sirfsoc-dma.txt b/Documentation/devicetree/bindings/dma/sirfsoc-dma.txt deleted file mode 100644 index ccd52d6a231a..000000000000 --- a/Documentation/devicetree/bindings/dma/sirfsoc-dma.txt +++ /dev/null @@ -1,44 +0,0 @@ -* CSR SiRFSoC DMA controller - -See dma.txt first - -Required properties: -- compatible: Should be "sirf,prima2-dmac", "sirf,atlas7-dmac" or - "sirf,atlas7-dmac-v2" -- reg: Should contain DMA registers location and length. -- interrupts: Should contain one interrupt shared by all channel -- #dma-cells: must be <1>. used to represent the number of integer - cells in the dmas property of client device. -- clocks: clock required - -Example: - -Controller: -dmac0: dma-controller@b00b0000 { - compatible = "sirf,prima2-dmac"; - reg = <0xb00b0000 0x10000>; - interrupts = <12>; - clocks = <&clks 24>; - #dma-cells = <1>; -}; - - -Client: -Fill the specific dma request line in dmas. In the below example, spi0 read -channel request line is 9 of the 2nd dma controller, while write channel uses -4 of the 2nd dma controller; spi1 read channel request line is 12 of the 1st -dma controller, while write channel uses 13 of the 1st dma controller: - -spi0: spi@b00d0000 { - compatible = "sirf,prima2-spi"; - dmas = <&dmac1 9>, - <&dmac1 4>; - dma-names = "rx", "tx"; -}; - -spi1: spi@b0170000 { - compatible = "sirf,prima2-spi"; - dmas = <&dmac0 12>, - <&dmac0 13>; - dma-names = "rx", "tx"; -}; diff --git a/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.txt b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.txt deleted file mode 100644 index dbe160400adc..000000000000 --- a/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.txt +++ /dev/null @@ -1,39 +0,0 @@ -Synopsys DesignWare AXI DMA Controller - -Required properties: -- compatible: "snps,axi-dma-1.01a" -- reg: Address range of the DMAC registers. This should include - all of the per-channel registers. -- interrupt: Should contain the DMAC interrupt number. -- dma-channels: Number of channels supported by hardware. -- snps,dma-masters: Number of AXI masters supported by the hardware. -- snps,data-width: Maximum AXI data width supported by hardware. - (0 - 8bits, 1 - 16bits, 2 - 32bits, ..., 6 - 512bits) -- snps,priority: Priority of channel. Array size is equal to the number of - dma-channels. Priority value must be programmed within [0:dma-channels-1] - range. (0 - minimum priority) -- snps,block-size: Maximum block size supported by the controller channel. - Array size is equal to the number of dma-channels. - -Optional properties: -- snps,axi-max-burst-len: Restrict master AXI burst length by value specified - in this property. If this property is missing the maximum AXI burst length - supported by DMAC is used. [1:256] - -Example: - -dmac: dma-controller@80000 { - compatible = "snps,axi-dma-1.01a"; - reg = <0x80000 0x400>; - clocks = <&core_clk>, <&cfgr_clk>; - clock-names = "core-clk", "cfgr-clk"; - interrupt-parent = <&intc>; - interrupts = <27>; - - dma-channels = <4>; - snps,dma-masters = <2>; - snps,data-width = <3>; - snps,block-size = <4096 4096 4096 4096>; - snps,priority = <0 1 2 3>; - snps,axi-max-burst-len = <16>; -}; diff --git a/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml new file mode 100644 index 000000000000..79e241498e25 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml @@ -0,0 +1,126 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/snps,dw-axi-dmac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synopsys DesignWare AXI DMA Controller + +maintainers: + - Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> + - Jee Heng Sia <jee.heng.sia@intel.com> + +description: + Synopsys DesignWare AXI DMA Controller DT Binding + +allOf: + - $ref: "dma-controller.yaml#" + +properties: + compatible: + enum: + - snps,axi-dma-1.01a + - intel,kmb-axi-dma + + reg: + minItems: 1 + items: + - description: Address range of the DMAC registers + - description: Address range of the DMAC APB registers + + reg-names: + items: + - const: axidma_ctrl_regs + - const: axidma_apb_regs + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Bus Clock + - description: Module Clock + + clock-names: + items: + - const: core-clk + - const: cfgr-clk + + '#dma-cells': + const: 1 + + dma-channels: + minimum: 1 + maximum: 8 + + snps,dma-masters: + description: | + Number of AXI masters supported by the hardware. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2] + + snps,data-width: + description: | + AXI data width supported by hardware. + (0 - 8bits, 1 - 16bits, 2 - 32bits, ..., 6 - 512bits) + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3, 4, 5, 6] + + snps,priority: + description: | + Channel priority specifier associated with the DMA channels. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 + + snps,block-size: + description: | + Channel block size specifier associated with the DMA channels. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 + + snps,axi-max-burst-len: + description: | + Restrict master AXI burst length by value specified in this property. + If this property is missing the maximum AXI burst length supported by + DMAC is used. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 256 + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + - '#dma-cells' + - dma-channels + - snps,dma-masters + - snps,data-width + - snps,priority + - snps,block-size + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + /* example with snps,dw-axi-dmac */ + dmac: dma-controller@80000 { + compatible = "snps,axi-dma-1.01a"; + reg = <0x80000 0x400>; + clocks = <&core_clk>, <&cfgr_clk>; + clock-names = "core-clk", "cfgr-clk"; + interrupt-parent = <&intc>; + interrupts = <27>; + #dma-cells = <1>; + dma-channels = <4>; + snps,dma-masters = <2>; + snps,data-width = <3>; + snps,block-size = <4096 4096 4096 4096>; + snps,priority = <0 1 2 3>; + snps,axi-max-burst-len = <16>; + }; diff --git a/Documentation/devicetree/bindings/dma/ste-coh901318.txt b/Documentation/devicetree/bindings/dma/ste-coh901318.txt deleted file mode 100644 index 091ad057e9cf..000000000000 --- a/Documentation/devicetree/bindings/dma/ste-coh901318.txt +++ /dev/null @@ -1,32 +0,0 @@ -ST-Ericsson COH 901 318 DMA Controller - -This is a DMA controller which has begun as a fork of the -ARM PL08x PrimeCell VHDL code. - -Required properties: -- compatible: should be "stericsson,coh901318" -- reg: register locations and length -- interrupts: the single DMA IRQ -- #dma-cells: must be set to <1>, as the channels on the - COH 901 318 are simple and identified by a single number -- dma-channels: the number of DMA channels handled - -Example: - -dmac: dma-controller@c00020000 { - compatible = "stericsson,coh901318"; - reg = <0xc0020000 0x1000>; - interrupt-parent = <&vica>; - interrupts = <2>; - #dma-cells = <1>; - dma-channels = <40>; -}; - -Consumers example: - -uart0: serial@c0013000 { - compatible = "..."; - (...) - dmas = <&dmac 17 &dmac 18>; - dma-names = "tx", "rx"; -}; diff --git a/Documentation/devicetree/bindings/dma/zxdma.txt b/Documentation/devicetree/bindings/dma/zxdma.txt deleted file mode 100644 index 0ab80f69e566..000000000000 --- a/Documentation/devicetree/bindings/dma/zxdma.txt +++ /dev/null @@ -1,38 +0,0 @@ -* ZTE ZX296702 DMA controller - -Required properties: -- compatible: Should be "zte,zx296702-dma" -- reg: Should contain DMA registers location and length. -- interrupts: Should contain one interrupt shared by all channel -- #dma-cells: see dma.txt, should be 1, para number -- dma-channels: physical channels supported -- dma-requests: virtual channels supported, each virtual channel - have specific request line -- clocks: clock required - -Example: - -Controller: - dma: dma-controller@09c00000{ - compatible = "zte,zx296702-dma"; - reg = <0x09c00000 0x1000>; - clocks = <&topclk ZX296702_DMA_ACLK>; - interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; - #dma-cells = <1>; - dma-channels = <24>; - dma-requests = <24>; - }; - -Client: -Use specific request line passing from dmax -For example, spdif0 tx channel request line is 4 - spdif0: spdif0@b004000 { - #sound-dai-cells = <0>; - compatible = "zte,zx296702-spdif"; - reg = <0x0b004000 0x1000>; - clocks = <&lsp0clk ZX296702_SPDIF0_DIV>; - clock-names = "tx"; - interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&dma 4>; - dma-names = "tx"; - } diff --git a/MAINTAINERS b/MAINTAINERS index dace4bd105d5..1d75afad615f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2828,9 +2828,7 @@ S: Odd fixes W: http://sourceforge.net/projects/xscaleiop F: Documentation/crypto/async-tx-api.rst F: crypto/async_tx/ -F: drivers/dma/ F: include/linux/async_tx.h -F: include/linux/dmaengine.h AT24 EEPROM DRIVER M: Bartosz Golaszewski <bgolaszewski@baylibre.com> @@ -5271,6 +5269,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine.git F: Documentation/devicetree/bindings/dma/ F: Documentation/driver-api/dmaengine/ F: drivers/dma/ +F: include/linux/dma/ F: include/linux/dmaengine.h F: include/linux/of_dma.h @@ -11614,7 +11613,6 @@ F: drivers/dma/at_hdmac.c F: drivers/dma/at_hdmac_regs.h F: drivers/dma/at_xdmac.c F: include/dt-bindings/dma/at91.h -F: include/linux/platform_data/dma-atmel.h MICROCHIP AT91 SERIAL DRIVER M: Richard Genoud <richard.genoud@gmail.com> diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index d242c7632621..0c2827fd8c19 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -124,13 +124,6 @@ config BCM_SBA_RAID has the capability to offload memcpy, xor and pq computation for raid5/6. -config COH901318 - bool "ST-Ericsson COH901318 DMA support" - select DMA_ENGINE - depends on ARCH_U300 || COMPILE_TEST - help - Enable support for ST-Ericsson COH 901 318 DMA. - config DMA_BCM2835 tristate "BCM2835 DMA engine support" depends on ARCH_BCM2835 @@ -179,6 +172,7 @@ config DMA_SUN6I config DW_AXI_DMAC tristate "Synopsys DesignWare AXI DMA support" depends on OF || COMPILE_TEST + depends on HAS_IOMEM select DMA_ENGINE select DMA_VIRTUAL_CHANNELS help @@ -378,14 +372,14 @@ config MILBEAUT_XDMAC XDMAC device. config MMP_PDMA - bool "MMP PDMA support" + tristate "MMP PDMA support" depends on ARCH_MMP || ARCH_PXA || COMPILE_TEST select DMA_ENGINE help Support the MMP PDMA engine for PXA and MMP platform. config MMP_TDMA - bool "MMP Two-Channel DMA support" + tristate "MMP Two-Channel DMA support" depends on ARCH_MMP || COMPILE_TEST select DMA_ENGINE select GENERIC_ALLOCATOR @@ -519,13 +513,6 @@ config PLX_DMA These are exposed via extra functions on the switch's upstream port. Each function exposes one DMA channel. -config SIRF_DMA - tristate "CSR SiRFprimaII/SiRFmarco DMA support" - depends on ARCH_SIRF - select DMA_ENGINE - help - Enable support for the CSR SiRFprimaII DMA engine. - config STE_DMA40 bool "ST-Ericsson DMA40 support" depends on ARCH_U8500 @@ -710,15 +697,6 @@ config XILINX_ZYNQMP_DPDMA driver provides the dmaengine required by the DisplayPort subsystem display driver. -config ZX_DMA - tristate "ZTE ZX DMA support" - depends on ARCH_ZX || COMPILE_TEST - select DMA_ENGINE - select DMA_VIRTUAL_CHANNELS - help - Support the DMA engine for ZTE ZX family platform devices. - - # driver files source "drivers/dma/bestcomm/Kconfig" @@ -740,6 +718,8 @@ source "drivers/dma/ti/Kconfig" source "drivers/dma/fsl-dpaa2-qdma/Kconfig" +source "drivers/dma/lgm/Kconfig" + # clients comment "DMA Clients" depends on DMA_ENGINE diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile index 948a8da05f8b..aa69094e3547 100644 --- a/drivers/dma/Makefile +++ b/drivers/dma/Makefile @@ -20,7 +20,6 @@ obj-$(CONFIG_AT_HDMAC) += at_hdmac.o obj-$(CONFIG_AT_XDMAC) += at_xdmac.o obj-$(CONFIG_AXI_DMAC) += dma-axi-dmac.o obj-$(CONFIG_BCM_SBA_RAID) += bcm-sba-raid.o -obj-$(CONFIG_COH901318) += coh901318.o coh901318_lli.o obj-$(CONFIG_DMA_BCM2835) += bcm2835-dma.o obj-$(CONFIG_DMA_JZ4780) += dma-jz4780.o obj-$(CONFIG_DMA_SA11X0) += sa11x0-dma.o @@ -65,7 +64,6 @@ obj-$(CONFIG_PPC_BESTCOMM) += bestcomm/ obj-$(CONFIG_PXA_DMA) += pxa_dma.o obj-$(CONFIG_RENESAS_DMA) += sh/ obj-$(CONFIG_SF_PDMA) += sf-pdma/ -obj-$(CONFIG_SIRF_DMA) += sirf-dma.o obj-$(CONFIG_STE_DMA40) += ste_dma40.o ste_dma40_ll.o obj-$(CONFIG_STM32_DMA) += stm32-dma.o obj-$(CONFIG_STM32_DMAMUX) += stm32-dmamux.o @@ -79,9 +77,9 @@ obj-$(CONFIG_TIMB_DMA) += timb_dma.o obj-$(CONFIG_UNIPHIER_MDMAC) += uniphier-mdmac.o obj-$(CONFIG_UNIPHIER_XDMAC) += uniphier-xdmac.o obj-$(CONFIG_XGENE_DMA) += xgene-dma.o -obj-$(CONFIG_ZX_DMA) += zx_dma.o obj-$(CONFIG_ST_FDMA) += st_fdma.o obj-$(CONFIG_FSL_DPAA2_QDMA) += fsl-dpaa2-qdma/ +obj-$(CONFIG_INTEL_LDMA) += lgm/ obj-y += mediatek/ obj-y += qcom/ diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index 7eaee5b705b1..30ae36124b1d 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -54,6 +54,25 @@ module_param(init_nr_desc_per_channel, uint, 0644); MODULE_PARM_DESC(init_nr_de |