diff options
96 files changed, 1797 insertions, 928 deletions
diff --git a/Documentation/acpi/enumeration.txt b/Documentation/acpi/enumeration.txt index 9b121a569ab4..750401f91341 100644 --- a/Documentation/acpi/enumeration.txt +++ b/Documentation/acpi/enumeration.txt @@ -254,8 +254,13 @@ GPIO support ~~~~~~~~~~~~ ACPI 5 introduced two new resources to describe GPIO connections: GpioIo and GpioInt. These resources are used be used to pass GPIO numbers used by -the device to the driver. For example: +the device to the driver. ACPI 5.1 extended this with _DSD (Device +Specific Data) which made it possible to name the GPIOs among other things. +For example: + +Device (DEV) +{ Method (_CRS, 0, NotSerialized) { Name (SBUF, ResourceTemplate() @@ -285,6 +290,18 @@ the device to the driver. For example: Return (SBUF) } + // ACPI 5.1 _DSD used for naming the GPIOs + Name (_DSD, Package () + { + ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package () + { + Package () {"power-gpios", Package() {^DEV, 0, 0, 0 }}, + Package () {"irq-gpios", Package() {^DEV, 1, 0, 0 }}, + } + }) + ... + These GPIO numbers are controller relative and path "\\_SB.PCI0.GPI0" specifies the path to the controller. In order to use these GPIOs in Linux we need to translate them to the corresponding Linux GPIO descriptors. @@ -300,11 +317,11 @@ a code like this: struct gpio_desc *irq_desc, *power_desc; - irq_desc = gpiod_get_index(dev, NULL, 1); + irq_desc = gpiod_get(dev, "irq"); if (IS_ERR(irq_desc)) /* handle error */ - power_desc = gpiod_get_index(dev, NULL, 0); + power_desc = gpiod_get(dev, "power"); if (IS_ERR(power_desc)) /* handle error */ @@ -313,6 +330,9 @@ a code like this: There are also devm_* versions of these functions which release the descriptors once the device is released. +See Documentation/acpi/gpio-properties.txt for more information about the +_DSD binding related to GPIOs. + MFD devices ~~~~~~~~~~~ The MFD devices register their children as platform devices. For the child diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 327556349757..491bbd104b06 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -3477,6 +3477,13 @@ bytes respectively. Such letter suffixes can also be entirely omitted. improve throughput, but will also increase the amount of memory reserved for use by the client. + suspend.pm_test_delay= + [SUSPEND] + Sets the number of seconds to remain in a suspend test + mode before resuming the system (see + /sys/power/pm_test). Only available when CONFIG_PM_DEBUG + is set. Default value is 5. + swapaccount=[0|1] [KNL] Enable accounting of swap in memory resource controller if no parameter or 1 is given or disable diff --git a/Documentation/power/basic-pm-debugging.txt b/Documentation/power/basic-pm-debugging.txt index edeecd447d23..b96098ccfe69 100644 --- a/Documentation/power/basic-pm-debugging.txt +++ b/Documentation/power/basic-pm-debugging.txt @@ -75,12 +75,14 @@ you should do the following: # echo platform > /sys/power/disk # echo disk > /sys/power/state -Then, the kernel will try to freeze processes, suspend devices, wait 5 seconds, -resume devices and thaw processes. If "platform" is written to +Then, the kernel will try to freeze processes, suspend devices, wait a few +seconds (5 by default, but configurable by the suspend.pm_test_delay module +parameter), resume devices and thaw processes. If "platform" is written to /sys/power/pm_test , then after suspending devices the kernel will additionally invoke the global control methods (eg. ACPI global control methods) used to -prepare the platform firmware for hibernation. Next, it will wait 5 seconds and -invoke the platform (eg. ACPI) global methods used to cancel hibernation etc. +prepare the platform firmware for hibernation. Next, it will wait a +configurable number of seconds and invoke the platform (eg. ACPI) global +methods used to cancel hibernation etc. Writing "none" to /sys/power/pm_test causes the kernel to switch to the normal hibernation/suspend operations. Also, when open for reading, /sys/power/pm_test diff --git a/MAINTAINERS b/MAINTAINERS index 283d1145e6d8..40eaa356e355 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4331,6 +4331,15 @@ S: Supported F: drivers/phy/ F: include/linux/phy/ +GENERIC PM DOMAINS +M: "Rafael J. Wysocki" <rjw@rjwysocki.net> +M: Kevin Hilman <khilman@kernel.org> +M: Ulf Hansson <ulf.hansson@linaro.org> +L: linux-pm@vger.kernel.org +S: Supported +F: drivers/base/power/domain*.c +F: include/linux/pm_domain.h + GENERIC UIO DRIVER FOR PCI DEVICES M: "Michael S. Tsirkin" <mst@redhat.com> L: kvm@vger.kernel.org diff --git a/arch/arm/include/asm/cpuidle.h b/arch/arm/include/asm/cpuidle.h index af319ac4960c..0f8424924902 100644 --- a/arch/arm/include/asm/cpuidle.h +++ b/arch/arm/include/asm/cpuidle.h @@ -1,6 +1,8 @@ #ifndef __ASM_ARM_CPUIDLE_H #define __ASM_ARM_CPUIDLE_H +#include <asm/proc-fns.h> + #ifdef CONFIG_CPU_IDLE extern int arm_cpuidle_simple_enter(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index); @@ -25,4 +27,25 @@ static inline int arm_cpuidle_simple_enter(struct cpuidle_device *dev, */ #define ARM_CPUIDLE_WFI_STATE ARM_CPUIDLE_WFI_STATE_PWR(UINT_MAX) +struct device_node; + +struct cpuidle_ops { + int (*suspend)(int cpu, unsigned long arg); + int (*init)(struct device_node *, int cpu); +}; + +struct of_cpuidle_method { + const char *method; + struct cpuidle_ops *ops; +}; + +#define CPUIDLE_METHOD_OF_DECLARE(name, _method, _ops) \ + static const struct of_cpuidle_method __cpuidle_method_of_table_##name \ + __used __section(__cpuidle_method_of_table) \ + = { .method = _method, .ops = _ops } + +extern int arm_cpuidle_suspend(int index); + +extern int arm_cpuidle_init(int cpu); + #endif diff --git a/arch/arm/kernel/cpuidle.c b/arch/arm/kernel/cpuidle.c index 89545f6c8403..318da33465f4 100644 --- a/arch/arm/kernel/cpuidle.c +++ b/arch/arm/kernel/cpuidle.c @@ -10,8 +10,28 @@ */ #include <linux/cpuidle.h> -#include <asm/proc-fns.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <asm/cpuidle.h> +extern struct of_cpuidle_method __cpuidle_method_of_table[]; + +static const struct of_cpuidle_method __cpuidle_method_of_table_sentinel + __used __section(__cpuidle_method_of_table_end); + +static struct cpuidle_ops cpuidle_ops[NR_CPUS]; + +/** + * arm_cpuidle_simple_enter() - a wrapper to cpu_do_idle() + * @dev: not used + * @drv: not used + * @index: not used + * + * A trivial wrapper to allow the cpu_do_idle function to be assigned as a + * cpuidle callback by matching the function signature. + * + * Returns the index passed as parameter + */ int arm_cpuidle_simple_enter(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { @@ -19,3 +39,114 @@ int arm_cpuidle_simple_enter(struct cpuidle_device *dev, return index; } + +/** + * arm_cpuidle_suspend() - function to enter low power idle states + * @index: an integer used as an identifier for the low level PM callbacks + * + * This function calls the underlying arch specific low level PM code as + * registered at the init time. + * + * Returns -EOPNOTSUPP if no suspend callback is defined, the result of the + * callback otherwise. + */ +int arm_cpuidle_suspend(int index) +{ + int ret = -EOPNOTSUPP; + int cpu = smp_processor_id(); + + if (cpuidle_ops[cpu].suspend) + ret = cpuidle_ops[cpu].suspend(cpu, index); + + return ret; +} + +/** + * arm_cpuidle_get_ops() - find a registered cpuidle_ops by name + * @method: the method name + * + * Search in the __cpuidle_method_of_table array the cpuidle ops matching the + * method name. + * + * Returns a struct cpuidle_ops pointer, NULL if not found. + */ +static struct cpuidle_ops *__init arm_cpuidle_get_ops(const char *method) +{ + struct of_cpuidle_method *m = __cpuidle_method_of_table; + + for (; m->method; m++) + if (!strcmp(m->method, method)) + return m->ops; + + return NULL; +} + +/** + * arm_cpuidle_read_ops() - Initialize the cpuidle ops with the device tree + * @dn: a pointer to a struct device node corresponding to a cpu node + * @cpu: the cpu identifier + * + * Get the method name defined in the 'enable-method' property, retrieve the + * associated cpuidle_ops and do a struct copy. This copy is needed because all + * cpuidle_ops are tagged __initdata and will be unloaded after the init + * process. + * + * Return 0 on sucess, -ENOENT if no 'enable-method' is defined, -EOPNOTSUPP if + * no cpuidle_ops is registered for the 'enable-method'. + */ +static int __init arm_cpuidle_read_ops(struct device_node *dn, int cpu) +{ + const char *enable_method; + struct cpuidle_ops *ops; + + enable_method = of_get_property(dn, "enable-method", NULL); + if (!enable_method) + return -ENOENT; + + ops = arm_cpuidle_get_ops(enable_method); + if (!ops) { + pr_warn("%s: unsupported enable-method property: %s\n", + dn->full_name, enable_method); + return -EOPNOTSUPP; + } + + cpuidle_ops[cpu] = *ops; /* structure copy */ + + pr_notice("cpuidle: enable-method property '%s'" + " found operations\n", enable_method); + + return 0; +} + +/** + * arm_cpuidle_init() - Initialize cpuidle_ops for a specific cpu + * @cpu: the cpu to be initialized + * + * Initialize the cpuidle ops with the device for the cpu and then call + * the cpu's idle initialization callback. This may fail if the underlying HW + * is not operational. + * + * Returns: + * 0 on success, + * -ENODEV if it fails to find the cpu node in the device tree, + * -EOPNOTSUPP if it does not find a registered cpuidle_ops for this cpu, + * -ENOENT if it fails to find an 'enable-method' property, + * -ENXIO if the HW reports a failure or a misconfiguration, + * -ENOMEM if the HW report an memory allocation failure + */ +int __init arm_cpuidle_init(int cpu) +{ + struct device_node *cpu_node = of_cpu_device_node_get(cpu); + int ret; + + if (!cpu_node) + return -ENODEV; + + ret = arm_cpuidle_read_ops(cpu_node, cpu); + if (!ret && cpuidle_ops[cpu].init) + ret = cpuidle_ops[cpu].init(cpu_node, cpu); + + of_node_put(cpu_node); + + return ret; +} diff --git a/arch/arm/mach-davinci/cpuidle.c b/arch/arm/mach-davinci/cpuidle.c index e365c1bb1265..306ebc51599a 100644 --- a/arch/arm/mach-davinci/cpuidle.c +++ b/arch/arm/mach-davinci/cpuidle.c @@ -17,7 +17,6 @@ #include <linux/cpuidle.h> #include <linux/io.h> #include <linux/export.h> -#include <asm/proc-fns.h> #include <asm/cpuidle.h> #include <mach/cpuidle.h> diff --git a/arch/arm/mach-imx/cpuidle-imx6q.c b/arch/arm/mach-imx/cpuidle-imx6q.c index d76d08623f9f..8e21ccc1eda2 100644 --- a/arch/arm/mach-imx/cpuidle-imx6q.c +++ b/arch/arm/mach-imx/cpuidle-imx6q.c @@ -9,7 +9,6 @@ #include <linux/cpuidle.h> #include <linux/module.h> #include <asm/cpuidle.h> -#include <asm/proc-fns.h> #include "common.h" #include "cpuidle.h" diff --git a/arch/arm/mach-imx/cpuidle-imx6sl.c b/arch/arm/mach-imx/cpuidle-imx6sl.c index 7d92e6584551..5742a9fd1ef2 100644 --- a/arch/arm/mach-imx/cpuidle-imx6sl.c +++ b/ |