diff options
34 files changed, 1735 insertions, 102 deletions
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 2e76c3476e2a..31b3a25680d0 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -888,9 +888,9 @@ memory region [offset, offset + size] for that kernel image. If '@offset' is omitted, then a suitable offset is selected automatically. - [KNL, X86-64, ARM64, RISCV] Select a region under 4G first, and - fall back to reserve region above 4G when '@offset' - hasn't been specified. + [KNL, X86-64, ARM64, RISCV, LoongArch] Select a region + under 4G first, and fall back to reserve region above + 4G when '@offset' hasn't been specified. See Documentation/admin-guide/kdump/kdump.rst for further details. crashkernel=range1:size1[,range2:size2,...][@offset] @@ -901,25 +901,27 @@ Documentation/admin-guide/kdump/kdump.rst for an example. crashkernel=size[KMG],high - [KNL, X86-64, ARM64, RISCV] range could be above 4G. + [KNL, X86-64, ARM64, RISCV, LoongArch] range could be + above 4G. Allow kernel to allocate physical memory region from top, so could be above 4G if system have more than 4G ram installed. Otherwise memory region will be allocated below 4G, if available. It will be ignored if crashkernel=X is specified. crashkernel=size[KMG],low - [KNL, X86-64, ARM64, RISCV] range under 4G. When crashkernel=X,high - is passed, kernel could allocate physical memory region - above 4G, that cause second kernel crash on system - that require some amount of low memory, e.g. swiotlb - requires at least 64M+32K low memory, also enough extra - low memory is needed to make sure DMA buffers for 32-bit - devices won't run out. Kernel would try to allocate + [KNL, X86-64, ARM64, RISCV, LoongArch] range under 4G. + When crashkernel=X,high is passed, kernel could allocate + physical memory region above 4G, that cause second kernel + crash on system that require some amount of low memory, + e.g. swiotlb requires at least 64M+32K low memory, also + enough extra low memory is needed to make sure DMA buffers + for 32-bit devices won't run out. Kernel would try to allocate default size of memory below 4G automatically. The default size is platform dependent. --> x86: max(swiotlb_size_or_default() + 8MiB, 256MiB) --> arm64: 128MiB --> riscv: 128MiB + --> loongarch: 128MiB This one lets the user specify own low range under 4G for second kernel instead. 0: to disable low allocation. diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml index 00b570c82903..60441f0c5d72 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml @@ -11,8 +11,13 @@ maintainers: description: | This interrupt controller is found in the Loongson-3 family of chips and - Loongson-2K1000 chip, as the primary package interrupt controller which + Loongson-2K series chips, as the primary package interrupt controller which can route local I/O interrupt to interrupt lines of cores. + Be aware of the following points. + 1.The Loongson-2K0500 is a single core CPU; + 2.The Loongson-2K0500/2K1000 has 64 device interrupt sources as inputs, so we + need to define two nodes in dts{i} to describe the "0-31" and "32-61" interrupt + sources respectively. allOf: - $ref: /schemas/interrupt-controller.yaml# @@ -33,6 +38,7 @@ properties: - const: main - const: isr0 - const: isr1 + minItems: 2 interrupt-controller: true @@ -45,11 +51,9 @@ properties: interrupt-names: description: List of names for the parent interrupts. items: - - const: int0 - - const: int1 - - const: int2 - - const: int3 + pattern: int[0-3] minItems: 1 + maxItems: 4 '#interrupt-cells': const: 2 @@ -69,6 +73,7 @@ required: - compatible - reg - interrupts + - interrupt-names - interrupt-controller - '#interrupt-cells' - loongson,parent_int_map @@ -86,7 +91,8 @@ if: then: properties: reg: - minItems: 3 + minItems: 2 + maxItems: 3 required: - reg-names diff --git a/Documentation/devicetree/bindings/loongarch/cpus.yaml b/Documentation/devicetree/bindings/loongarch/cpus.yaml new file mode 100644 index 000000000000..f175872995e1 --- /dev/null +++ b/Documentation/devicetree/bindings/loongarch/cpus.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/loongarch/cpus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LoongArch CPUs + +maintainers: + - Binbin Zhou <zhoubinbin@loongson.cn> + +description: + This document describes the list of LoongArch CPU cores that support FDT, + it describe the layout of CPUs in a system through the "cpus" node. + +allOf: + - $ref: /schemas/cpu.yaml# + +properties: + compatible: + enum: + - loongson,la264 + - loongson,la364 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - clocks + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/loongson,ls2k-clk.h> + + cpus { + #size-cells = <0>; + #address-cells = <1>; + + cpu@0 { + compatible = "loongson,la264"; + device_type = "cpu"; + reg = <0>; + clocks = <&clk LOONGSON2_NODE_CLK>; + }; + + cpu@1 { + compatible = "loongson,la264"; + device_type = "cpu"; + reg = <1>; + clocks = <&clk LOONGSON2_NODE_CLK>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/loongarch/loongson.yaml b/Documentation/devicetree/bindings/loongarch/loongson.yaml new file mode 100644 index 000000000000..e1a4a97b7576 --- /dev/null +++ b/Documentation/devicetree/bindings/loongarch/loongson.yaml @@ -0,0 +1,34 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/loongarch/loongson.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Loongson SoC-based boards + +maintainers: + - Binbin Zhou <zhoubinbin@loongson.cn> + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: Loongson-2K0500 processor based boards + items: + - const: loongson,ls2k0500-ref + - const: loongson,ls2k0500 + + - description: Loongson-2K1000 processor based boards + items: + - const: loongson,ls2k1000-ref + - const: loongson,ls2k1000 + + - description: Loongson-2K2000 processor based boards + items: + - const: loongson,ls2k2000-ref + - const: loongson,ls2k2000 + +additionalProperties: true + +... diff --git a/Documentation/rust/arch-support.rst b/Documentation/rust/arch-support.rst index b91e9ef4d0c2..73203ba1e901 100644 --- a/Documentation/rust/arch-support.rst +++ b/Documentation/rust/arch-support.rst @@ -12,10 +12,11 @@ which uses ``libclang``. Below is a general summary of architectures that currently work. Level of support corresponds to ``S`` values in the ``MAINTAINERS`` file. -============ ================ ============================================== -Architecture Level of support Constraints -============ ================ ============================================== -``um`` Maintained ``x86_64`` only. -``x86`` Maintained ``x86_64`` only. -============ ================ ============================================== +============= ================ ============================================== +Architecture Level of support Constraints +============= ================ ============================================== +``loongarch`` Maintained - +``um`` Maintained ``x86_64`` only. +``x86`` Maintained ``x86_64`` only. +============= ================ ============================================== diff --git a/MAINTAINERS b/MAINTAINERS index 2fb78ede9625..2b90c5e28100 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3692,6 +3692,13 @@ L: bpf@vger.kernel.org S: Supported F: arch/arm64/net/ +BPF JIT for LOONGARCH +M: Tiezhu Yang <yangtiezhu@loongson.cn> +R: Hengqi Chen <hengqi.chen@gmail.com> +L: bpf@vger.kernel.org +S: Maintained +F: arch/loongarch/net/ + BPF JIT for MIPS (32-BIT AND 64-BIT) M: Johan Almbladh <johan.almbladh@anyfinetworks.com> M: Paul Burton <paulburton@kernel.org> diff --git a/arch/loongarch/Kbuild b/arch/loongarch/Kbuild index beb8499dd8ed..bfa21465d83a 100644 --- a/arch/loongarch/Kbuild +++ b/arch/loongarch/Kbuild @@ -4,6 +4,7 @@ obj-y += net/ obj-y += vdso/ obj-$(CONFIG_KVM) += kvm/ +obj-$(CONFIG_BUILTIN_DTB) += boot/dts/ # for cleaning subdir- += boot diff --git a/arch/loongarch/Kconfig b/arch/loongarch/Kconfig index 15d05dd2b7f3..10959e6c3583 100644 --- a/arch/loongarch/Kconfig +++ b/arch/loongarch/Kconfig @@ -142,6 +142,7 @@ config LOONGARCH select HAVE_REGS_AND_STACK_ACCESS_API select HAVE_RETHOOK select HAVE_RSEQ + select HAVE_RUST select HAVE_SAMPLE_FTRACE_DIRECT select HAVE_SAMPLE_FTRACE_DIRECT_MULTI select HAVE_SETUP_PER_CPU_AREA if NUMA @@ -376,6 +377,24 @@ config CMDLINE_FORCE endchoice +config BUILTIN_DTB + bool "Enable built-in dtb in kernel" + depends on OF + help + Some existing systems do not provide a canonical device tree to + the kernel at boot time. Let's provide a device tree table in the + kernel, keyed by the dts filename, containing the relevant DTBs. + + Built-in DTBs are generic enough and can be used as references. + +config BUILTIN_DTB_NAME + string "Source file for built-in dtb" + depends on BUILTIN_DTB + help + Base name (without suffix, relative to arch/loongarch/boot/dts/) + for the DTS file that will be used to produce the DTB linked into + the kernel. + config DMI bool "Enable DMI scanning" select DMI_SCAN_MACHINE_NON_EFI_FALLBACK @@ -577,6 +596,9 @@ config ARCH_SELECTS_CRASH_DUMP depends on CRASH_DUMP select RELOCATABLE +config ARCH_HAS_GENERIC_CRASHKERNEL_RESERVATION + def_bool CRASH_CORE + config RELOCATABLE bool "Relocatable kernel" help diff --git a/arch/loongarch/Makefile b/arch/loongarch/Makefile index 4ba8d67ddb09..983aa2b1629a 100644 --- a/arch/loongarch/Makefile +++ b/arch/loongarch/Makefile @@ -6,6 +6,7 @@ boot := arch/loongarch/boot KBUILD_DEFCONFIG := loongson3_defconfig +KBUILD_DTBS := dtbs image-name-y := vmlinux image-name-$(CONFIG_EFI_ZBOOT) := vmlinuz @@ -81,8 +82,11 @@ KBUILD_AFLAGS_MODULE += -Wa,-mla-global-with-abs KBUILD_CFLAGS_MODULE += -fplt -Wa,-mla-global-with-abs,-mla-local-with-abs endif +KBUILD_RUSTFLAGS_MODULE += -Crelocation-model=pic + ifeq ($(CONFIG_RELOCATABLE),y) KBUILD_CFLAGS_KERNEL += -fPIE +KBUILD_RUSTFLAGS_KERNEL += -Crelocation-model=pie LDFLAGS_vmlinux += -static -pie --no-dynamic-linker -z notext $(call ld-option, --apply-dynamic-relocs) endif @@ -141,7 +145,7 @@ endif vdso-install-y += arch/loongarch/vdso/vdso.so.dbg -all: $(notdir $(KBUILD_IMAGE)) +all: $(notdir $(KBUILD_IMAGE)) $(KBUILD_DTBS) vmlinuz.efi: vmlinux.efi diff --git a/arch/loongarch/boot/dts/Makefile b/arch/loongarch/boot/dts/Makefile index 5f1f55e911ad..747d0c3f6389 100644 --- a/arch/loongarch/boot/dts/Makefile +++ b/arch/loongarch/boot/dts/Makefile @@ -1,4 +1,5 @@ # SPDX-License-Identifier: GPL-2.0-only -dtstree := $(srctree)/$(src) -dtb-y := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts)) +dtb-y = loongson-2k0500-ref.dtb loongson-2k1000-ref.dtb loongson-2k2000-ref.dtb + +obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .dtb.o, $(CONFIG_BUILTIN_DTB_NAME)) diff --git a/arch/loongarch/boot/dts/loongson-2k0500-ref.dts b/arch/loongarch/boot/dts/loongson-2k0500-ref.dts new file mode 100644 index 000000000000..b38071a4d0b0 --- /dev/null +++ b/arch/loongarch/boot/dts/loongson-2k0500-ref.dts @@ -0,0 +1,88 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2023 Loongson Technology Corporation Limited + */ + +/dts-v1/; + +#include "loongson-2k0500.dtsi" + +/ { + compatible = "loongson,ls2k0500-ref", "loongson,ls2k0500"; + model = "Loongson-2K0500 Reference Board"; + + aliases { + ethernet0 = &gmac0; + ethernet1 = &gmac1; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@200000 { + device_type = "memory"; + reg = <0x0 0x00200000 0x0 0x0ee00000>, + <0x0 0x90000000 0x0 0x60000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x0 0x2000000>; + linux,cma-default; + }; + }; +}; + +&gmac0 { + status = "okay"; + + phy-mode = "rgmii"; + bus_id = <0x0>; +}; + +&gmac1 { + status = "okay"; + + phy-mode = "rgmii"; + bus_id = <0x1>; +}; + +&i2c0 { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + eeprom@57{ + compatible = "atmel,24c16"; + reg = <0x57>; + pagesize = <16>; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&rtc0 { + status = "okay"; +}; diff --git a/arch/loongarch/boot/dts/loongson-2k0500.dtsi b/arch/loongarch/boot/dts/loongson-2k0500.dtsi new file mode 100644 index 000000000000..444779c21034 --- /dev/null +++ b/arch/loongarch/boot/dts/loongson-2k0500.dtsi @@ -0,0 +1,266 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2023 Loongson Technology Corporation Limited + */ + +/dts-v1/; + +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "loongson,la264"; + device_type = "cpu"; + reg = <0x0>; + clocks = <&cpu_clk>; + }; + }; + + cpu_clk: cpu-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <500000000>; + }; + + cpuintc: interrupt-controller { + compatible = "loongson,cpu-interrupt-controller"; + #interrupt-cells = <1>; + interrupt-controller; + }; + + bus@10000000 { + compatible = "simple-bus"; + ranges = <0x0 0x10000000 0x0 0x10000000 0x0 0x10000000>, + <0x0 0x02000000 0x0 0x02000000 0x0 0x02000000>, + <0x0 0x20000000 0x0 0x20000000 0x0 0x10000000>, + <0x0 0x40000000 0x0 0x40000000 0x0 0x40000000>, + <0xfe 0x0 0xfe 0x0 0x0 0x40000000>; + #address-cells = <2>; + #size-cells = <2>; + + isa@16400000 { + compatible = "isa"; + #size-cells = <1>; + #address-cells = <2>; + ranges = <1 0x0 0x0 0x16400000 0x4000>; + }; + + liointc0: interrupt-controller@1fe11400 { + compatible = "loongson,liointc-2.0"; + reg = <0x0 0x1fe11400 0x0 0x40>, + <0x0 0x1fe11040 0x0 0x8>; + reg-names = "main", "isr0"; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&cpuintc>; + interrupts = <2>; + interrupt-names = "int0"; + + loongson,parent_int_map = <0xffffffff>, /* int0 */ + <0x00000000>, /* int1 */ + <0x00000000>, /* int2 */ + <0x00000000>; /* int3 */ + }; + + liointc1: interrupt-controller@1fe11440 { + compatible = "loongson,liointc-2.0"; + reg = <0x0 0x1fe11440 0x0 0x40>, + <0x0 0x1fe11048 0x0 0x8>; + reg-names = "main", "isr0"; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&cpuintc>; + interrupts = <4>; + interrupt-names = "int2"; + + loongson,parent_int_map = <0x00000000>, /* int0 */ + <0x00000000>, /* int1 */ + <0xffffffff>, /* int2 */ + <0x00000000>; /* int3 */ + }; + + eiointc: interrupt-controller@1fe11600 { + compatible = "loongson,ls2k0500-eiointc"; + reg = <0x0 0x1fe11600 0x0 0xea00>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&cpuintc>; + interrupts = <3>; + }; + + gmac0: ethernet@1f020000 { + compatible = "snps,dwmac-3.70a"; + reg = <0x0 0x1f020000 0x0 0x10000>; + interrupt-parent = <&liointc0>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + status = "disabled"; + }; + + gmac1: ethernet@1f030000 { + compatible = "snps,dwmac-3.70a"; + reg = <0x0 0x1f030000 0x0 0x10000>; + interrupt-parent = <&liointc0>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + status = "disabled"; + }; + + sata: sata@1f040000 { + compatible = "snps,spear-ahci"; + reg = <0x0 0x1f040000 0x0 0x10000>; + interrupt-parent = <&eiointc>; + interrupts = <75>; + status = "disabled"; + }; + + ehci0: usb@1f050000 { + compatible = "generic-ehci"; + reg = <0x0 0x1f050000 0x0 0x8000>; + interrupt-parent = <&eiointc>; + interrupts = <71>; + status = "disabled"; + }; + + ohci0: usb@1f058000 { + compatible = "generic-ohci"; + reg = <0x0 0x1f058000 0x0 0x8000>; + interrupt-parent = <&eiointc>; + interrupts = <72>; + status = "disabled"; + }; + + uart0: serial@1ff40800 { + compatible = "ns16550a"; + reg = <0x0 0x1ff40800 0x0 0x10>; + clock-frequency = <100000000>; + interrupt-parent = <&eiointc>; + interrupts = <2>; + no-loopback-test; + status = "disabled"; + }; + + i2c0: i2c@1ff48000 { + compatible = "loongson,ls2k-i2c"; + reg = <0x0 0x1ff48000 0x0 0x0800>; + interrupt-parent = <&eiointc>; + interrupts = <14>; + status = "disabled"; + }; + + i2c@1ff48800 { + compatible = "loongson,ls2k-i2c"; + reg = <0x0 0x1ff48800 0x0 0x0800>; + interrupt-parent = <&eiointc>; + interrupts = <15>; + status = "disabled"; + }; + + i2c@1ff49000 { + compatible = "loongson,ls2k-i2c"; + reg = <0x0 0x1ff49000 0x0 0x0800>; + interrupt-parent = <&eiointc>; + interrupts = <16>; + status = "disabled"; + }; + + i2c@1ff49800 { + compatible = "loongson,ls2k-i2c"; + reg = <0x0 0x1ff49800 0x0 0x0800>; + interrupt-parent = <&eiointc>; + interrupts = <17>; + status = "disabled"; + }; + + i2c@1ff4a000 { + compatible = "loongson,ls2k-i2c"; + reg = <0x0 0x1ff4a000 0x0 0x0800>; + interrupt-parent = <&eiointc>; + interrupts = <18>; + status = "disabled"; + }; + + i2c@1ff4a800 { + compatible = "loongson,ls2k-i2c"; + reg = <0x0 0x1ff4a800 0x0 0x0800>; + interrupt-parent = <&eiointc>; + interrupts = <19>; + status = "disabled"; + }; + + pmc: power-management@1ff6c000 { + compatible = "loongson,ls2k0500-pmc", "syscon"; + reg = <0x0 0x1ff6c000 0x0 0x58>; + interrupt-parent = <&eiointc>; + interrupts = <56>; + loongson,suspend-address = <0x0 0x1c000500>; + + syscon-reboot { + compatible = "syscon-reboot"; + offset = <0x30>; + mask = <0x1>; + }; + + syscon-poweroff { + compatible = "syscon-poweroff"; + regmap = <&pmc>; + offset = <0x14>; + mask = <0x3c00>; + value = <0x3c00>; + }; + }; + + rtc0: rtc@1ff6c100 { + compatible = "loongson,ls2k0500-rtc", "loongson,ls7a-rtc"; + reg = <0x0 0x1ff6c100 0x0 0x100>; + interrupt-parent = <&eiointc>; + interrupts = <35>; + status = "disabled"; + }; + + pcie@1a000000 { + compatible = "loongson,ls2k-pci"; + reg = <0x0 0x1a000000 0x0 0x02000000>, + <0xfe 0x0 0x0 0x20000000>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + bus-range = <0x0 0x5>; + ranges = <0x01000000 0x0 0x00004000 0x0 0x16404000 0x0 0x00004000>, + <0x02000000 0x0 0x40000000 0x0 0x40000000 0x0 0x40000000>; + + pcie@0,0 { + reg = <0x0000 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + interrupt-parent = <&eiointc>; + #interrupt-cells = <1>; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = <0x0 0x0 0x0 0x0 &eiointc 81>; + ranges; + }; + + pcie@1,0 { + reg = <0x0800 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + interrupt-parent = <&eiointc>; + #interrupt-cells = <1>; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = <0x0 0x0 0x0 0x0 &eiointc 82>; + ranges; + }; + }; + }; +}; diff --git a/arch/loongarch/boot/dts/loongson-2k1000-ref.dts b/arch/loongarch/boot/dts/loongson-2k1000-ref.dts new file mode 100644 index 000000000000..132a2d1ea8bc --- /dev/null +++ b/arch/loongarch/boot/dts/loongson-2k1000-ref.dts @@ -0,0 +1,183 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2023 Loongson Technology Corporation Limited + */ + +/dts-v1/; + +#include "loongson-2k1000.dtsi" + +/ { + compatible = "loongson,ls2k1000-ref", "loongson,ls2k1000"; + model = "Loongson-2K1000 Reference Board"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@200000 { + device_type = "memory"; + reg = <0x0 0x00200000 0x0 0x06e00000>, + <0x0 0x08000000 0x0 0x07000000>, + <0x0 0x90000000 0x1 0xe0000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x0 0x2000000>; + linux,cma-default; + }; + }; +}; + +&gmac0 { + status = "okay"; + + phy-mode = "rgmii"; + phy-handle = <&phy0>; + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; +}; + +&gmac1 { + status = "okay"; + + phy-mode = "rgmii"; + phy-handle = <&phy1>; + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + phy1: ethernet-phy@1 { + reg = <16>; + }; + }; +}; + +&i2c2 { + status = "okay"; + + pinctrl-0 = <&i2c0_pins_default>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + eeprom@57{ + compatible = "atmel,24c16"; + reg = <0x57>; + pagesize = <16>; + }; +}; + +&spi0 { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + spidev@0 { + compatible = "rohm,dh2228fv"; + spi-max-frequency = <100000000>; + reg = <0>; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&clk { + status = "okay"; +}; + +&rtc0 { + status = "okay"; +}; + +&pctrl { + status = "okay"; + + sdio_pins_default: sdio-pins { + sdio-pinmux { + groups = "sdio"; + function = "sdio"; + }; + sdio-det-pinmux { + groups = "pwm2"; + function = "gpio"; + }; + }; + + pwm1_pins_default: pwm1-pins { + pinmux { + groups = "pwm1"; + function = "pwm1"; + }; + }; + + pwm0_pins_default: pwm0-pins { + pinmux { |