16 files changed, 3098 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/net/lantiq,pef2256.yaml b/Documentation/devicetree/bindings/net/lantiq,pef2256.yaml
new file mode 100644
index 000000000000..7da8370e2468
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/lantiq,pef2256.yaml
@@ -0,0 +1,213 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/lantiq,pef2256.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lantiq PEF2256
+
+maintainers:
+  - Herve Codina <herve.codina@bootlin.com>
+
+description:
+  The Lantiq PEF2256, also known as Infineon PEF2256 or FALC56, is a framer and
+  line interface component designed to fulfill all required interfacing between
+  an analog E1/T1/J1 line and the digital PCM system highway/H.100 bus.
+
+properties:
+  compatible:
+    items:
+      - const: lantiq,pef2256
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Master Clock
+      - description: System Clock Receive
+      - description: System Clock Transmit
+
+  clock-names:
+    items:
+      - const: mclk
+      - const: sclkr
+      - const: sclkx
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      GPIO used to reset the device.
+    maxItems: 1
+
+  pinctrl:
+    $ref: /schemas/pinctrl/pinctrl.yaml#
+    additionalProperties: false
+
+    patternProperties:
+      '-pins$':
+        type: object
+        $ref: /schemas/pinctrl/pinmux-node.yaml#
+        additionalProperties: false
+
+        properties:
+          pins:
+            enum: [ RPA, RPB, RPC, RPD, XPA, XPB, XPC, XPD ]
+
+          function:
+            enum: [ SYPR, RFM, RFMB, RSIGM, RSIG, DLR, FREEZE, RFSP, LOS,
+                    SYPX, XFMS, XSIG, TCLK, XMFB, XSIGM, DLX, XCLK, XLT,
+                    GPI, GPOH, GPOL ]
+
+        required:
+          - pins
+          - function
+
+  lantiq,data-rate-bps:
+    enum: [2048000, 4096000, 8192000, 16384000]
+    default: 2048000
+    description:
+      Data rate (bit per seconds) on the system highway.
+
+  lantiq,clock-falling-edge:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Data is sent on falling edge of the clock (and received on the rising
+      edge). If 'clock-falling-edge' is not present, data is sent on the
+      rising edge (and received on the falling edge).
+
+  lantiq,channel-phase:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3, 4, 5, 6, 7]
+    default: 0
+    description: |
+      The pef2256 delivers a full frame (32 8-bit time-slots in E1 and 24 8-bit
+      time-slots 8 8-bit signaling in E1/J1) every 125us. This lead to a data
+      rate of 2048000 bit/s. When lantiq,data-rate-bps is more than 2048000
+      bit/s, the data (all 32 8-bit) present in the frame are interleave with
+      unused time-slots. The lantiq,channel-phase property allows to set the
+      correct alignment of the interleave mechanism.
+      For instance, suppose lantiq,data-rate-bps = 8192000 (ie 4*2048000), and
+      lantiq,channel-phase = 2, the interleave schema with unused time-slots
+      (nu) and used time-slots (XX) for TSi is
+        nu nu XX nu nu nu XX nu nu nu XX nu
+        <-- TSi --> <- TSi+1 -> <- TSi+2 ->
+      With lantiq,data-rate-bps = 8192000, and lantiq,channel-phase = 1, the
+      interleave schema is
+        nu XX nu nu nu XX nu nu nu XX nu nu
+        <-- TSi --> <- TSi+1 -> <- TSi+2 ->
+      With lantiq,data-rate-bps = 4096000 (ie 2*2048000), and
+      lantiq,channel-phase = 1, the interleave schema is
+        nu    XX    nu    XX    nu    XX
+        <-- TSi --> <- TSi+1 -> <- TSi+2 ->
+
+patternProperties:
+  '^codec(-([0-9]|[1-2][0-9]|3[0-1]))?$':
+    type: object
+    $ref: /schemas/sound/dai-common.yaml
+    unevaluatedProperties: false
+    description:
+      Codec provided by the pef2256. This codec allows to use some of the PCM
+      system highway time-slots as audio channels to transport audio data over
+      the E1/T1/J1 lines.
+      The time-slots used by the codec must be set and so, the properties
+      'dai-tdm-slot-num', 'dai-tdm-slot-width', 'dai-tdm-slot-tx-mask' and
+      'dai-tdm-slot-rx-mask' must be present in the sound card node for
+      sub-nodes that involve the codec. The codec uses 8-bit time-slots.
+      'dai-tdm-tdm-slot-with' must be set to 8.
+      The tx and rx masks define the pef2256 time-slots assigned to the codec.
+
+    properties:
+      compatible:
+        const: lantiq,pef2256-codec
+
+      '#sound-dai-cells':
+        const: 0
+
+    required:
+      - compatible
+      - '#sound-dai-cells'
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    pef2256: framer@2000000 {
+      compatible = "lantiq,pef2256";
+      reg = <0x2000000 0x100>;
+      interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+      interrupt-parent = <&intc>;
+      clocks = <&clk_mclk>, <&clk_sclkr>, <&clk_sclkx>;
+      clock-names = "mclk", "sclkr", "sclkx";
+      reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+      lantiq,data-rate-bps = <4096000>;
+
+      pinctrl {
+        pef2256_rpa_sypr: rpa-pins {
+          pins = "RPA";
+          function = "SYPR";
+        };
+        pef2256_xpa_sypx: xpa-pins {
+          pins = "XPA";
+          function = "SYPX";
+        };
+      };
+
+      pef2256_codec0: codec-0 {
+        compatible = "lantiq,pef2256-codec";
+        #sound-dai-cells = <0>;
+        sound-name-prefix = "PEF2256_0";
+      };
+
+      pef2256_codec1: codec-1 {
+        compatible = "lantiq,pef2256-codec";
+        #sound-dai-cells = <0>;
+        sound-name-prefix = "PEF2256_1";
+      };
+    };
+
+    sound {
+      compatible = "simple-audio-card";
+      #address-cells = <1>;
+      #size-cells = <0>;
+      simple-audio-card,dai-link@0 { /* CPU DAI1 - pef2256 codec 1 */
+        reg = <0>;
+        cpu {
+          sound-dai = <&cpu_dai1>;
+        };
+        codec {
+          sound-dai = <&pef2256_codec0>;
+          dai-tdm-slot-num = <4>;
+          dai-tdm-slot-width = <8>;
+          /* TS 1, 2, 3, 4 */
+          dai-tdm-slot-tx-mask = <0 1 1 1 1>;
+          dai-tdm-slot-rx-mask = <0 1 1 1 1>;
+        };
+      };
+      simple-audio-card,dai-link@1 { /* CPU DAI2 - pef2256 codec 2 */
+        reg = <1>;
+        cpu {
+          sound-dai = <&cpu_dai2>;
+        };
+        codec {
+          sound-dai = <&pef2256_codec1>;
+          dai-tdm-slot-num = <4>;
+          dai-tdm-slot-width = <8>;
+          /* TS 5, 6, 7, 8 */
+          dai-tdm-slot-tx-mask = <0 0 0 0 0 1 1 1 1>;
+          dai-tdm-slot-rx-mask = <0 0 0 0 0 1 1 1 1>;
+        };
+      };
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index 97f51d5ec1cf..1e3f4f34ce69 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12028,6 +12028,14 @@ S:	Maintained
 F:	arch/mips/lantiq
 F:	drivers/soc/lantiq
 
+LANTIQ PEF2256 DRIVER
+M:	Herve Codina <herve.codina@bootlin.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/net/lantiq,pef2256.yaml
+F:	drivers/net/wan/framer/pef2256/
+F:	drivers/pinctrl/pinctrl-pef2256.c
+F:	include/linux/framer/pef2256.h
+
 LASI 53c700 driver for PARISC
 M:	"James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
 L:	linux-scsi@vger.kernel.org
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index dcb069dde66b..7dda87756d3f 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -95,6 +95,8 @@ config HDLC_X25
 comment "X.25/LAPB support is disabled"
 	depends on HDLC && (LAPB!=m || HDLC!=m) && LAPB!=y
 
+source "drivers/net/wan/framer/Kconfig"
+
 config PCI200SYN
 	tristate "Goramo PCI200SYN support"
 	depends on HDLC && PCI
diff --git a/drivers/net/wan/Makefile b/drivers/net/wan/Makefile
index 5bec8fae47f8..8119b49d1da9 100644
--- a/drivers/net/wan/Makefile
+++ b/drivers/net/wan/Makefile
@@ -14,6 +14,8 @@ obj-$(CONFIG_HDLC_FR)		+= hdlc_fr.o
 obj-$(CONFIG_HDLC_PPP)		+= hdlc_ppp.o
 obj-$(CONFIG_HDLC_X25)		+= hdlc_x25.o
 
+obj-y				+= framer/
+
 obj-$(CONFIG_FARSYNC)		+= farsync.o
 
 obj-$(CONFIG_LAPBETHER)		+= lapbether.o
diff --git a/drivers/net/wan/framer/Kconfig b/drivers/net/wan/framer/Kconfig
new file mode 100644
index 000000000000..dc83caef9485
--- /dev/null
+++ b/drivers/net/wan/framer/Kconfig
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# FRAMER
+#
+
+menuconfig FRAMER
+	tristate "Framer Subsystem"
+	help
+	  A framer is a component in charge of an E1/T1 line interface.
+	  Connected usually to a TDM bus, it converts TDM frames to/from E1/T1
+	  frames. It also provides information related to the E1/T1 line.
+	  Used with HDLC, the network can be reached through the E1/T1 line.
+
+	  This framework is designed to provide a generic interface for framer
+	  devices present in the kernel. This layer will have the generic
+	  API by which framer drivers can create framer using the framer
+	  framework and framer users can obtain reference to the framer.
+	  All the users of this framework should select this config.
+
+if FRAMER
+
+config GENERIC_FRAMER
+	bool
+
+config FRAMER_PEF2256
+	tristate "Lantiq PEF2256"
+	depends on OF
+	depends on HAS_IOMEM
+	select GENERIC_FRAMER
+	select MFD_CORE
+	select REGMAP_MMIO
+	help
+	  Enable support for the Lantiq PEF2256 (FALC56) framer.
+	  The PEF2256 is a framer and line interface between analog E1/T1/J1
+	  line and a digital PCM bus.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called framer-pef2256.
+
+endif # FRAMER
diff --git a/drivers/net/wan/framer/Makefile b/drivers/net/wan/framer/Makefile
new file mode 100644
index 000000000000..3403f2b14534
--- /dev/null
+++ b/drivers/net/wan/framer/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the framer drivers.
+#
+
+obj-$(CONFIG_GENERIC_FRAMER)			+= framer-core.o
+obj-$(CONFIG_FRAMER_PEF2256)			+= pef2256/
diff --git a/drivers/net/wan/framer/framer-core.c b/drivers/net/wan/framer/framer-core.c
new file mode 100644
index 000000000000..c04dc88bda6c
--- /dev/null
+++ b/drivers/net/wan/framer/framer-core.c
@@ -0,0 +1,882 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Generic Framer framework.
+ *
+ * Copyright 2023 CS GROUP France
+ *
+ * Author: Herve Codina <herve.codina@bootlin.com>
+ */
+
+#include <linux/device.h>
+#include <linux/framer/framer.h>
+#include <linux/framer/framer-provider.h>
+#include <linux/idr.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/of.h>
+#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+
+static struct class *framer_class;
+static DEFINE_MUTEX(framer_provider_mutex);
+static LIST_HEAD(framer_provider_list);
+static DEFINE_IDA(framer_ida);
+
+#define dev_to_framer(a)	(container_of((a), struct framer, dev))
+
+int framer_pm_runtime_get(struct framer *framer)
+{
+	int ret;
+
+	if (!pm_runtime_enabled(&framer->dev))
+		return -EOPNOTSUPP;
+
+	ret = pm_runtime_get(&framer->dev);
+	if (ret < 0 && ret != -EINPROGRESS)
+		pm_runtime_put_noidle(&framer->dev);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(framer_pm_runtime_get);
+
+int framer_pm_runtime_get_sync(struct framer *framer)
+{
+	int ret;
+
+	if (!pm_runtime_enabled(&framer->dev))
+		return -EOPNOTSUPP;
+
+	ret = pm_runtime_get_sync(&framer->dev);
+	if (ret < 0)
+		pm_runtime_put_sync(&framer->dev);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(framer_pm_runtime_get_sync);
+
+int framer_pm_runtime_put(struct framer *framer)
+{
+	if (!pm_runtime_enabled(&framer->dev))
+		return -EOPNOTSUPP;
+
+	return pm_runtime_put(&framer->dev);
+}
+EXPORT_SYMBOL_GPL(framer_pm_runtime_put);
+
+int framer_pm_runtime_put_sync(struct framer *framer)
+{
+	if (!pm_runtime_enabled(&framer->dev))
+		return -EOPNOTSUPP;
+
+	return pm_runtime_put_sync(&framer->dev);
+}
+EXPORT_SYMBOL_GPL(framer_pm_runtime_put_sync);
+
+/**
+ * framer_init - framer internal initialization before framer operation
+ * @framer: the framer returned by framer_get()
+ *
+ * Used to allow framer's driver to perform framer internal initialization,
+ * such as PLL block powering, clock initialization or anything that's
+ * is required by the framer to perform the start of operation.
+ * Must be called before framer_power_on().
+ *
+ * Return: %0 if successful, a negative error code otherwise
+ */
+int framer_init(struct framer *framer)
+{
+	bool start_polling = false;
+	int ret;
+
+	ret = framer_pm_runtime_get_sync(framer);
+	if (ret < 0 && ret != -EOPNOTSUPP)
+		return ret;
+	ret = 0; /* Override possible ret == -EOPNOTSUPP */
+
+	mutex_lock(&framer->mutex);
+	if (framer->power_count > framer->init_count)
+		dev_warn(&framer->dev, "framer_power_on was called before framer init\n");
+
+	if (framer->init_count == 0) {
+		if (framer->ops->init) {
+			ret = framer->ops->init(framer);
+			if (ret < 0) {
+				dev_err(&framer->dev, "framer init failed --> %d\n", ret);
+				goto out;
+			}
+		}
+		if (framer->ops->flags & FRAMER_FLAG_POLL_STATUS)
+			start_polling = true;
+	}
+	++framer->init_count;
+
+out:
+	mutex_unlock(&framer->mutex);
+
+	if (!ret && start_polling) {
+		ret = framer_get_status(framer, &framer->prev_status);
+		if (ret < 0) {
+			dev_warn(&framer->dev, "framer get status failed --> %d\n", ret);
+			/* Will be retried on polling_work */
+			ret = 0;
+		}
+		queue_delayed_work(system_power_efficient_wq, &framer->polling_work, 1 * HZ);
+	}
+
+	framer_pm_runtime_put(framer);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(framer_init);
+
+/**
+ * framer_exit - Framer internal un-initialization
+ * @framer: the framer returned by framer_get()
+ *
+ * Must be called after framer_power_off().
+ */
+int framer_exit(struct framer *framer)
+{
+	int ret;
+
+	ret = framer_pm_runtime_get_sync(framer);
+	if (ret < 0 && ret != -EOPNOTSUPP)
+		return ret;
+	ret = 0; /* Override possible ret == -EOPNOTSUPP */
+
+	mutex_lock(&framer->mutex);
+	--framer->init_count;
+	if (framer->init_count == 0) {
+		if (framer->ops->flags & FRAMER_FLAG_POLL_STATUS) {
+			mutex_unlock(&framer->mutex);
+			cancel_delayed_work_sync(&framer->polling_work);
+			mutex_lock(&framer->mutex);
+		}
+
+		if (framer->ops->exit)
+			framer->ops->exit(framer);
+	}
+
+	mutex_unlock(&framer->mutex);
+	framer_pm_runtime_put(framer);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(framer_exit);
+
+/**
+ * framer_power_on - Enable the framer and enter proper operation
+ * @framer: the framer returned by framer_get()
+ *
+ * Must be called after framer_init().
+ *
+ * Return: %0 if successful, a negative error code otherwise
+ */
+int framer_power_on(struct framer *framer)
+{
+	int ret;
+
+	if (framer->pwr) {
+		ret = regulator_enable(framer->pwr);
+		if (ret)
+			return ret;
+	}
+
+	ret = framer_pm_runtime_get_sync(framer);
+	if (ret < 0 && ret != -EOPNOTSUPP)
+		goto err_pm_sync;
+
+	mutex_lock(&framer->mutex);
+	if (framer->power_count == 0 && framer->ops->power_on) {
+		ret = framer->ops->power_on(framer);
+		if (ret < 0) {
+			dev_err(&framer->dev, "framer poweron failed --> %d\n", ret);
+			goto err_pwr_on;
+		}
+	}
+	++framer->power_count;
+	mutex_unlock(&framer->mutex);
+	return 0;
+
+err_pwr_on:
+	mutex_unlock(&framer->mutex);
+	framer_pm_runtime_put_sync(framer);
+err_pm_sync:
+	if (framer->pwr)
+		regulator_disable(framer->pwr);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(framer_power_on);
+
+/**
+ * framer_power_off - Disable the framer.
+ * @framer: the framer returned by framer_get()
+ *
+ * Must be called before framer_exit().
+ *
+ * Return: %0 if successful, a negative error code otherwise
+ */
+int framer_power_off(struct framer *framer)
+{
+	int ret;
+
+	mutex_lock(&framer->mutex);
+	if (framer->power_count == 1 && framer->ops->power_off) {
+		ret = framer->ops->power_off(framer);
+		if (ret < 0) {
+			dev_err(&framer->dev, "framer poweroff failed --> %d\n", ret);
+			mutex_unlock(&framer->mutex);
+			return ret;
+		}
+	}
+	--framer->power_count;
+	mutex_unlock(&framer->mutex);
+	framer_pm_runtime_put(framer);
+
+	if (framer->pwr)
+		regulator_disable(framer->pwr);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(framer_power_off);
+
+/**
+ * framer_get_status() - Gets the framer status
+ * @framer: the framer returned by framer_get()
+ * @status: the status to retrieve
+ *
+ * Used to get the framer status. framer_init() must have been called
+ * on the framer.
+ *
+ * Return: %0 if successful, a negative error code otherwise
+ */
+int framer_get_status(struct framer *framer, struct framer_status *status)
+{
+	int ret;
+
+	if (!framer->ops->get_status)
+		return -EOPNOTSUPP;
+
+	/* Be sure to have known values (struct padding and future extensions) */
+	memset(status, 0, sizeof(*status));
+
+	mutex_lock(&framer->mutex);
+	ret = framer->ops->get_status(framer, status);
+	mutex_unlock(&framer->mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(framer_get_status);
+
+/**
+ * framer_set_config() - Sets the framer configuration
+ * @framer: the framer returned by framer_get()
+ * @config: the configuration to set
+ *
+ * Used to set the framer configuration. framer_init() must have been called
+ * on the framer.
+ *
+ * Return: %0 if successful, a negative error code otherwise
+ */
+int framer_set_config(struct framer *framer, const struct framer_config *config)
+{
+	int ret;
+
+	if (!framer->ops->set_config)
+		return -EOPNOTSUPP;
+
+	mutex_lock(&framer->mutex);
+	ret = framer->ops->set_config(framer, config);
+	mutex_unlock(&framer->mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(framer_set_config);
+
+/**
+ * framer_get_config() - Gets the framer configuration
+ * @framer: the framer returned by framer_get()
+ * @config: the configuration to retrieve
+ *
+ * Used to get the framer configuration. framer_init() must have been called
+ * on the framer.
+ *
+ * Return: %0 if successful, a negative error code otherwise
+ */
+int framer_get_config(struct framer *framer, struct framer_config *config)
+{
+	int ret;
+
+	if (!framer->ops->get_config)
+		return -EOPNOTSUPP;
+
+	mutex_lock(&framer->mutex);
+	ret = framer->ops->get_config(framer, config);
+	mutex_unlock(&framer->mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(framer_get_config);
+
+static void framer_polling_work(struct work_struct *work)
+{
+	struct framer *framer = container_of(work, struct framer, polling_work.work);
+	struct framer_status status;
+	int ret;
+
+	ret = framer_get_status(framer, &status);
+	if (ret) {
+		dev_err(&framer->dev, "polling, get status failed (%d)\n", ret);
+		goto end;
+	}
+	if (memcmp(&framer->prev_status, &status, sizeof(status))) {
+		blocking_notifier_call_chain(&framer->notifier_list,
+					     FRAMER_EVENT_STATUS, NULL);
+		memcpy(&framer->prev_status, &status, sizeof(status));
+	}
+
+end:
+	/* Re-schedule task in 1 sec */
+	queue_delayed_work(system_power_efficient_wq, &framer->polling_work, 1 * HZ);
+}
+
+/**
+ * framer_notifier_register() - Registers a notifier
+ * @framer: the framer returned by framer_get()
+ * @nb: the notifier block to register
+ *
+ * Used to register a notifier block on framer events. framer_init() must have
+ * been called on the framer.
+ * The available framer events are present in enum framer_events.
+ *
+ * Return: %0 if successful, a negative error code otherwise
+ */
+int framer_notifier_register(struct framer *framer, struct notifier_block *nb)
+{
+	return blocking_notifier_chain_register(&framer->notifier_list, nb);
+}
+EXPORT_SYMBOL_GPL(framer_notifier_register);
+
+/**
+ * framer_notifier_unregister() - Unregisters a notifier
+ * @framer: the framer returned by framer_get()
+ * @nb: the notifier block to unregister
+ *
+ * Used to unregister a notifier block. framer_init() must have
+ * been called on the framer.
+ *
+ * Return: %0 if successful, a negative error code otherwise
+ */
+int framer_notifier_unregister(struct framer *framer, struct notifier_block *nb)
+{
+	return blocking_notifier_chain_unregister(&framer->notifier_list, nb);
+}
+EXPORT_SYMBOL_GPL(framer_notifier_unregister);
+
+static struct framer_provider *framer_provider_of_lookup(const struct device_node *node)
+{
+	struct framer_provider *framer_provider;
+
+	list_for_each_entry(framer_provider, &framer_provider_list, list) {
+		if (device_match_of_node(framer_provider->dev, node))
+			return framer_provider;
+	}
+
+	return ERR_PTR(-EPROBE_DEFER);
+}
+
+static struct framer *framer_of_get_from_provider(struct of_phandle_args *args)
+{
+	struct framer_provider *framer_provider;
+	struct framer *framer;
+
+	mutex_lock(&framer_provider_mutex);
+	framer_provider = framer_provider_of_lookup(args->np);
+	if (IS_ERR(framer_provider) || !try_module_get(framer_provider->owner)) {
+		framer = ERR_PTR(-EPROBE_DEFER);
+		goto end;
+	}
+
+	framer = framer_provider->of_xlate(framer_provider->dev, args);
+
+	module_put(framer_provider->owner);
+
+end:
+	mutex_unlock(&framer_provider_mutex);
+
+	return framer;
+}
+
+static struct framer *framer_of_get_byphandle(struct device_node *np, const char *propname,
+					      int index)
+{
+	struct of_phandle_args args;
+	struct framer *framer;
+	int ret;
+
+	ret = of_parse_phandle_with_optional_args(np, propname, "#framer-cells", index, &args);
+	if (ret)
+		return ERR_PTR(-ENODEV);
+
+	if (!of_device_is_available(args.np)) {
+		framer = ERR_PTR(-ENODEV);
+		goto out_node_put;
+	}
+
+	framer = framer_of_get_from_provider(&args);
+
+out_node_put:
+	of_node_put(args.np);
+
+	return framer;
+}
+
+static struct framer *framer_of_get_byparent(struct device_node *np, int index)
+{
+	struct of_phandle_args args;
+	struct framer *framer;
+
+	args.np = of_get_parent(np);
+	args.args_count = 1;
+	args.args[0] = index;
+
+	while (args.np) {
+		framer = framer_of_get_from_provider(&args);
+		if (IS_ERR(framer) && PTR_ERR(framer) != -EPROBE_DEFER) {
+			args.np = of_get_next_parent(args.np);
+			continue;
+		}
+		of_node_put(args.np);
+		return framer;
+	}
+
+	return ERR_PTR(-ENODEV);
+}
+
+/**
+ * framer_get() - lookup and obtain a reference to a framer.
+ * @dev: device that requests the framer
+ * @con_id: name of the framer from device's point of view
+ *
+ * Returns the framer driver, after getting a refcount to it; or
+ * -ENODEV if there is no such framer. The caller is responsible for
+ * calling framer_put() to release that count.
+ */
+struct framer *framer_get(struct device *dev, const char *con_id)
+{
+	struct framer *framer = ERR_PTR(-ENODEV);
+	struct device_link *link;
+	int ret;
+
+	if (dev->of_node) {
+		if (con_id)
+			framer = framer_of_get_byphandle(dev->of_node, con_id, 0);
+		else
+			framer = framer_of_get_byparent(dev->of_node, 0);
+	}
+
+	if (IS_ERR(framer))
+		return framer;
+
+	get_device(&framer->dev);
+
+	if (!try_module_get(framer->ops->owner)) {
+		ret = -EPROBE_DEFER;
+		goto err_put_device;
+	}
+
+	link = device_link_add(dev, &framer->dev, DL_FLAG_STATELESS);
+	if (!link) {
+		dev_err(dev, "failed to create device_link to %s\n", dev_name(&framer->dev));
+		ret = -EPROBE_DEFER;
+		goto err_module_put;
+	}
+
+	return framer;
+
+err_module_put:
+	module_put(framer->ops->owner);
+err_put_device:
+	put_device(&framer->dev);
+	return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(framer_get);
+
+/**
+ * framer_put() - release the framer
+ * @dev: device that wants to release this framer
+ * @framer: the framer returned by framer_get()
+ *
+ * Releases a refcount the caller received from framer_get().
+ */
+void framer_put(struct device *dev, struct framer *framer)
+{
+	device_link_remove(dev, &framer->dev);
+
+	module_put(framer->ops->owner);
+	put_device(&framer->dev);
+}
+EXPORT_SYMBOL_GPL(framer_put);
+
+static void devm_framer_put(struct device *dev, void *res)
+{
+	struct framer *framer = *(struct framer **)res;
+
+	framer_put(dev, framer);
+}
+
+/**
+ * devm_framer_get() - lookup and obtain a reference to a framer.
+ * @dev: device that requests this framer
+ * @con_id: name of the framer from device's point of view
+ *
+ * Gets the framer using framer_get(), and associates a device with it using
+ * devres. On driver detach, framer_put() function is invoked on the devres
+ * data, then, devres data is freed.
+ */
+struct framer *devm_framer_get(struct device *dev, const char *con_id)
+{
+	struct framer **ptr, *framer;
+
+	ptr = devres_alloc(devm_framer_put, sizeof(*ptr), GFP_KERNEL);
+	if (!ptr)
+		return ERR_PTR(-ENOMEM);
+
+	framer = framer_get(dev, con_id);
+	if (!IS_ERR(framer)) {
+		*ptr = framer;
+		devres_add(dev, ptr);
+	} else {
+		devres_free(ptr);
+		return framer;
+	}
+
+	return framer;
+}
+EXPORT_SYMBOL_GPL(devm_framer_get);
+
+/**
+ * devm_framer_optional_get() - lookup and obtain a reference to an optional
+ * framer.
+ * @dev: device that requests this framer
+ * @con_id: name of the framer from device's point of view
+ *
+ * Same as devm_framer_get() except that if the framer does not exist, it is not
+ * considered an error and -ENODEV will not be returned. Instead the NULL framer
+ * is returned.
+ */
+struct framer *devm_framer_optional_get(struct device *dev, const char *con_id)
+{
+	struct framer *framer = devm_framer_get(dev, con_id);
+
+	if (PTR_ERR(framer) == -ENODEV)
+		framer = NULL;
+
+	return framer;
+}
+EXPORT_SYMBOL_GPL(devm_framer_optional_get);
+
+static void framer_notify_status_work(struct work_struct *work)
+{
+	struct framer *framer = container_of(work, struct framer, notify_status_work);
+
+	blocking_notifier_call_chain(&framer->notifier_list, FRAMER_EVENT_STATUS, NULL);
+}
+
+void framer_notify_status_change(struct framer *framer)
+{
+	/* Can be called from atomic context -> just schedule a task to call
+	 * blocking notifiers
+	 */
+	queue_work(system_power_efficient_wq, &framer->notify_status_work);
+}
+EXPORT_SYMBOL_GPL(framer_notify_status_change);
+
+/**
+ * framer_create() - create a new framer
+ * @dev: device that is creating the new framer
+ * @node: device node of the framer. default to dev->of_node.
+ * @ops: function pointers for performing framer operations
+ *
+ * Called to create a framer using framer framework.
+ */
+struct framer *framer_create(struct device *dev, struct device_node *node,
+			     const struct framer_ops *ops)
+{
+	struct framer *framer;
+	int ret;
+	int id;
+
+	/* get_status() is mandatory if the provider ask for polling status */
+	if (WARN_ON((ops->flags & FRAMER_FLAG_POLL_STATUS) && !ops->get_status))
+		return ERR_PTR(-EINVAL);
+
+	framer = kzalloc(sizeof(*framer), GFP_KERNEL);
+	if (!framer)
+		return ERR_PTR(-ENOMEM);
+
+	id = ida_alloc(&framer_ida, GFP_KERNEL);
+	if (id < 0) {
+		dev_err(dev, "unable to get id\n");
+		ret = id;
+		goto free_framer;
+	}
+
+	device_initialize(&framer->dev);
+	mutex_init(&framer->mutex);
+	INIT_WORK(&framer->notify_status_work, framer_notify_status_work);
+	INIT_DELAYED_WORK(&framer->polling_work, framer_polling_work);
+	BLOCKING_INIT_NOTIFIER_HEAD(&framer->notifier_list);
+
+	framer->dev.class = framer_class;
+	framer->dev.parent = dev;
+	framer->dev.of_node = node ? node : dev->of_node;
+	framer->id = id;
+	framer->ops = ops;
+
+	ret = dev_set_name(&framer->dev, "framer-%s.%d", dev_name(dev), id);
+	if (ret)
+		goto put_dev;
+
+	/* framer-supply */
+	framer->pwr = regulator_get_optional(&framer->dev, "framer");
+	if (IS_ERR(framer->pwr)) {
+		ret = PTR_ERR(framer->pwr);
+		if (ret == -EPROBE_DEFER)
+			goto put_dev;
+
+		framer->pwr = NULL;
+	}
+
+	ret = device_add(&framer->dev);
+	if (ret)
+		goto put_dev;
+
+	if (pm_runtime_enabled(dev)) {
+		pm_runtime_enable(&framer->dev);
+		pm_runtime_no_callbacks(&framer->dev);
+	}
+
+	return framer;
+
+put_dev:
+	put_device(&framer->dev);  /* calls framer_release() which frees resources */
+	return ERR_PTR(ret);
+
+free_framer:
+	kfree(framer);
+	return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(framer_create);
+
+/**
+ * framer_destroy() - destroy the framer
+ * @framer: the framer to be destroyed
+ *
+ * Called to destroy the framer.
+ */
+void framer_destroy(struct framer *framer)
+{
+	/* polling_work should already be stopped but if framer_exit() was not
+	 * called (bug), here it's the last time to do that ...
+	 */
+	cancel_delayed_work_sync(&framer->polling_work);
+	cancel_work_sync(&framer->notify_status_work);
+	pm_runtime_disable(&framer->dev);
+	device_unregister(&framer->dev); /* calls framer_release() which frees resources */
+}
+EXPORT_SYMBOL_GPL(framer_destroy);
+
+static void devm_framer_destroy(struct device *dev, void *res)
+{
+	struct framer *framer = *(struct framer **)res;
+
+	framer_destroy(framer);
+}
+
+/**
+ * devm_framer_create() - create a new framer
+ * @dev: device that is creating the new framer
+ *