diff options
51 files changed, 273 insertions, 363 deletions
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml index 81534d04094b..b71a20af5f70 100644 --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml @@ -85,9 +85,8 @@ properties: CPU power good signal from external PMIC to PMC is enabled. nvidia,suspend-mode: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1, 2] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] description: The suspend mode that the platform should use. Mode 0 is for LP0, CPU + Core voltage off and DRAM in self-refresh diff --git a/Documentation/devicetree/bindings/ata/sata_highbank.yaml b/Documentation/devicetree/bindings/ata/sata_highbank.yaml index b195457006cc..5e2a2394e600 100644 --- a/Documentation/devicetree/bindings/ata/sata_highbank.yaml +++ b/Documentation/devicetree/bindings/ata/sata_highbank.yaml @@ -40,28 +40,25 @@ properties: calxeda,led-order: description: Maps port numbers to offsets within the SGPIO bitstream. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 1 - maxItems: 8 + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 calxeda,port-phys: description: | phandle-combophy and lane assignment, which maps each SATA port to a combophy and a lane within that combophy - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle-array - - minItems: 1 - maxItems: 8 + $ref: /schemas/types.yaml#/definitions/phandle-array + minItems: 1 + maxItems: 8 calxeda,tx-atten: description: | Contains TX attenuation override codes, one per port. The upper 24 bits of each entry are always 0 and thus ignored. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 1 - maxItems: 8 + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 calxeda,sgpio-gpio: description: | diff --git a/Documentation/devicetree/bindings/bus/baikal,bt1-apb.yaml b/Documentation/devicetree/bindings/bus/baikal,bt1-apb.yaml index d6a3b71ea835..68b0131a31d0 100644 --- a/Documentation/devicetree/bindings/bus/baikal,bt1-apb.yaml +++ b/Documentation/devicetree/bindings/bus/baikal,bt1-apb.yaml @@ -71,8 +71,8 @@ examples: bus@1f059000 { compatible = "baikal,bt1-apb", "simple-bus"; - reg = <0 0x1f059000 0 0x1000>, - <0 0x1d000000 0 0x2040000>; + reg = <0x1f059000 0x1000>, + <0x1d000000 0x2040000>; reg-names = "ehb", "nodev"; #address-cells = <1>; #size-cells = <1>; diff --git a/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml b/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml index 203bc0e5346b..29e1aaea132b 100644 --- a/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml +++ b/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml @@ -85,8 +85,8 @@ examples: bus@1f05a000 { compatible = "baikal,bt1-axi", "simple-bus"; - reg = <0 0x1f05a000 0 0x1000>, - <0 0x1f04d110 0 0x8>; + reg = <0x1f05a000 0x1000>, + <0x1f04d110 0x8>; reg-names = "qos", "ehb"; #address-cells = <1>; #size-cells = <1>; diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.yaml b/Documentation/devicetree/bindings/clock/imx6q-clock.yaml index 429e3b62b965..92a8e545e212 100644 --- a/Documentation/devicetree/bindings/clock/imx6q-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx6q-clock.yaml @@ -23,7 +23,6 @@ properties: items: - description: CCM interrupt request 1 - description: CCM interrupt request 2 - maxItems: 2 '#clock-cells': const: 1 diff --git a/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml index 135568c46350..c97bf95b4150 100644 --- a/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml @@ -23,7 +23,6 @@ properties: items: - description: CCM interrupt request 1 - description: CCM interrupt request 2 - maxItems: 2 '#clock-cells': const: 1 diff --git a/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml index fa55f1ce3e57..de48924be191 100644 --- a/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml @@ -23,7 +23,6 @@ properties: items: - description: CCM interrupt request 1 - description: CCM interrupt request 2 - maxItems: 2 '#clock-cells': const: 1 diff --git a/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml index 982d698e8c54..e50cddee43c3 100644 --- a/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml @@ -23,7 +23,6 @@ properties: items: - description: CCM interrupt request 1 - description: CCM interrupt request 2 - maxItems: 2 '#clock-cells': const: 1 diff --git a/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml b/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml index 3c779eea6394..36ce7667c972 100644 --- a/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml @@ -23,7 +23,6 @@ properties: items: - description: CCM interrupt request 1 - description: CCM interrupt request 2 - maxItems: 2 '#clock-cells': const: 1 diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml index 1695e3e4bcec..ed8148e26e24 100644 --- a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml @@ -106,8 +106,8 @@ examples: #include <dt-bindings/power/rk3288-power.h> vopb: vopb@ff930000 { compatible = "rockchip,rk3288-vop"; - reg = <0x0 0xff930000 0x0 0x19c>, - <0x0 0xff931000 0x0 0x1000>; + reg = <0xff930000 0x19c>, + <0xff931000 0x1000>; interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, diff --git a/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml b/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml index 04a3c51e1dc1..1240f6289249 100644 --- a/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml @@ -63,11 +63,10 @@ patternProperties: snps,nr-gpios: description: The number of GPIO pins exported by the port. + $ref: /schemas/types.yaml#/definitions/uint32 default: 32 - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 1 - maximum: 32 + minimum: 1 + maximum: 32 interrupts: description: | diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml index 98baecb4b98a..208faaffa58d 100644 --- a/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml +++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml @@ -67,8 +67,7 @@ properties: 1 - direct_sync 2 - scaled_sync 3 - pulse_sync - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 3 diff --git a/Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml b/Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml index efd2eba5f23c..e201a06d8fdc 100644 --- a/Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml +++ b/Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml @@ -25,9 +25,8 @@ properties: amstaos,cover-comp-gain: description: Multiplier for gain compensation - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [1, 16] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 16] required: - compatible diff --git a/Documentation/devicetree/bindings/input/iqs269a.yaml b/Documentation/devicetree/bindings/input/iqs269a.yaml index f0242bb4be81..9c154e5e1a91 100644 --- a/Documentation/devicetree/bindings/input/iqs269a.yaml +++ b/Documentation/devicetree/bindings/input/iqs269a.yaml @@ -40,10 +40,9 @@ properties: posed on channels 6 and 7 by Hall-effect sensing. azoteq,suspend-mode: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1, 2, 3] - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 description: | Specifies the power mode during suspend as follows: 0: Automatic (same as normal runtime, i.e. suspend/resume disabled) @@ -56,11 +55,10 @@ properties: description: Divides the device's core clock by a factor of 4. azoteq,ulp-update: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 7 - default: 3 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 7 + default: 3 description: Specifies the ultra-low-power mode update rate. azoteq,reseed-offset: @@ -70,34 +68,30 @@ properties: reseed events. azoteq,filt-str-lp-lta: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1, 2, 3] - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 description: Specifies the long-term average filter strength during low-power mode. azoteq,filt-str-lp-cnt: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1, 2, 3] - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 description: Specifies the raw count filter strength during low-power mode. azoteq,filt-str-np-lta: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1, 2, 3] - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 description: Specifies the long-term average filter strength during normal-power mode. azoteq,filt-str-np-cnt: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1, 2, 3] - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 description: Specifies the raw count filter strength during normal-power mode. @@ -156,11 +150,10 @@ properties: description: Disables all raw count filtering. azoteq,gpio3-select: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 7 - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 7 + default: 0 description: Selects the channel for which the GPIO3 pin represents touch state. @@ -172,10 +165,9 @@ properties: in either direction. azoteq,tx-freq: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1, 2, 3] - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 description: | Specifies the inductive sensing excitation frequency as follows (paren- thesized numbers represent the frequency if 'azoteq,clk-div' is present): @@ -189,10 +181,9 @@ properties: description: Increases the global capacitance adder from 0.5 pF to 1.5 pF. azoteq,reseed-select: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1, 2, 3] - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 description: | Specifies the event(s) that prompt the device to reseed (i.e. reset the long-term average) of an associated channel as follows: @@ -208,10 +199,9 @@ properties: channels. azoteq,filt-str-slider: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1, 2, 3] - default: 1 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 1 description: Specifies the slider coordinate filter strength. patternProperties: @@ -246,27 +236,25 @@ patternProperties: description: Specifies that the channel participates in slider 1. azoteq,rx-enable: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 1 - maxItems: 8 - items: - minimum: 0 - maximum: 7 + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 + items: + minimum: 0 + maximum: 7 description: Specifies the CRX pin(s) associated with the channel. By default, only the CRX pin corresponding to the channel's index is enabled (e.g. CRX0 for channel 0). azoteq,tx-enable: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 1 - maxItems: 8 - items: - minimum: 0 - maximum: 7 - default: [0, 1, 2, 3, 4, 5, 6, 7] + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 + items: + minimum: 0 + maximum: 7 + default: [0, 1, 2, 3, 4, 5, 6, 7] description: Specifies the TX pin(s) associated with the channel. azoteq,meas-cap-decrease: @@ -279,10 +267,9 @@ patternProperties: description: Floats any inactive CRX pins instead of grounding them. azoteq,local-cap-size: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1, 2] - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + default: 0 description: | Specifies the capacitance to be added to the channel as follows: 0: None @@ -296,10 +283,9 @@ patternProperties: deep-touch events relative to their respective thresholds. azoteq,proj-bias: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1, 2, 3] - default: 2 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 2 description: | Specifies the bias current applied during projected-capacitance sensing as follows: @@ -309,10 +295,9 @@ patternProperties: 3: 20 uA azoteq,sense-mode: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1, 9, 14, 15] - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 9, 14, 15] + default: 0 description: | Specifies the channel's sensing mode as follows: 0: Self capacitance @@ -322,10 +307,9 @@ patternProperties: 15: Temperature azoteq,sense-freq: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1, 2, 3] - default: 1 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 1 description: | Specifies the channel's sensing frequency as follows (parenthesized numbers represent the frequency if 'azoteq,clk-div' is present): @@ -339,10 +323,9 @@ patternProperties: description: Enables the static front-end for the channel. azoteq,ati-mode: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1, 2, 3] - default: 3 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 3 description: | Specifies the channel's ATI mode as follows: 0: Disabled @@ -351,39 +334,35 @@ patternProperties: 3: Full azoteq,ati-base: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [75, 100, 150, 200] - default: 100 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [75, 100, 150, 200] + default: 100 description: Specifies the channel's ATI base. azoteq,ati-target: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - multipleOf: 32 - minimum: 0 - maximum: 2016 - default: 512 + $ref: /schemas/types.yaml#/definitions/uint32 + multipleOf: 32 + minimum: 0 + maximum: 2016 + default: 512 description: Specifies the channel's ATI target. azoteq,assoc-select: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 1 - maxItems: 8 - items: - minimum: 0 - maximum: 7 + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 + items: + minimum: 0 + maximum: 7 description: Specifies the associated channels for which the channel serves as a reference channel. By default, no channels are selected. azoteq,assoc-weight: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 255 - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + default: 0 description: Specifies the channel's impact weight if it acts as an associated channel (0 = 0% impact, 255 = 200% impact). @@ -411,11 +390,10 @@ patternProperties: properties: azoteq,thresh: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 255 - default: 10 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + default: 10 description: Specifies the threshold for the event. linux,code: @@ -430,19 +408,17 @@ patternProperties: properties: azoteq,thresh: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 255 - default: 8 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + default: 8 description: Specifies the threshold for the event. azoteq,hyst: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 15 - default: 4 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + default: 4 description: Specifies the hysteresis for the event. linux,code: @@ -457,19 +433,17 @@ patternProperties: properties: azoteq,thresh: |