diff options
70 files changed, 1455 insertions, 1501 deletions
diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index ba2bfb547909..40bc475ee7e1 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -119,6 +119,10 @@ properties: - fsl,mpr121 # Monolithic Power Systems Inc. multi-phase controller mp2888 - mps,mp2888 + # Monolithic Power Systems Inc. multi-phase controller mp2971 + - mps,mp2971 + # Monolithic Power Systems Inc. multi-phase controller mp2973 + - mps,mp2973 # Monolithic Power Systems Inc. multi-phase controller mp2975 - mps,mp2975 # Honeywell Humidicon HIH-6130 humidity/temperature sensor @@ -315,6 +319,8 @@ properties: - plx,pex8648 # Pulsedlight LIDAR range-finding sensor - pulsedlight,lidar-lite-v2 + # Renesas HS3001 Temperature and Relative Humidity Sensors + - renesas,hs3001 # Renesas ISL29501 time-of-flight sensor - renesas,isl29501 # Rohm DH2228FV diff --git a/Documentation/hwmon/hs3001.rst b/Documentation/hwmon/hs3001.rst new file mode 100644 index 000000000000..9f59dfc212d9 --- /dev/null +++ b/Documentation/hwmon/hs3001.rst @@ -0,0 +1,37 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +Kernel driver HS3001 +==================== + +Supported chips: + + * Renesas HS3001, HS3002, HS3003, HS3004 + + Prefix: 'hs3001' + + Addresses scanned: - + + Datasheet: https://www.renesas.com/us/en/document/dst/hs300x-datasheet?r=417401 + +Author: + + - Andre Werner <andre.werner@systec-electronic.com> + +Description +----------- + +This driver implements support for the Renesas HS3001 chips, a humidity +and temperature family. Temperature is measured in degrees celsius, relative +humidity is expressed as a percentage. In the sysfs interface, all values are +scaled by 1000, i.e. the value for 31.5 degrees celsius is 31500. + +The device communicates with the I2C protocol. Sensors have the I2C +address 0x44 by default. + +sysfs-Interface +--------------- + +=================== ================= +temp1_input: temperature input +humidity1_input: humidity input +=================== ================= diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index 042e1cf9501b..88dadea85cfc 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -78,6 +78,7 @@ Hardware Monitoring Kernel Drivers gxp-fan-ctrl hih6130 hp-wmi-sensors + hs3001 ibmaem ibm-cffps ibmpowernv @@ -195,7 +196,6 @@ Hardware Monitoring Kernel Drivers shtc1 sis5595 sl28cpld - smm665 smpro-hwmon smsc47b397 smsc47m192 diff --git a/Documentation/hwmon/nct6775.rst b/Documentation/hwmon/nct6775.rst index 5ba8276aad4b..9d7a10de61a7 100644 --- a/Documentation/hwmon/nct6775.rst +++ b/Documentation/hwmon/nct6775.rst @@ -80,7 +80,13 @@ Supported chips: Datasheet: Available from Nuvoton upon request + * Nuvoton NCT6796D-S/NCT6799D-R + Prefix: 'nct6799' + + Addresses scanned: ISA address retrieved from Super I/O registers + + Datasheet: Available from Nuvoton upon request Authors: @@ -277,4 +283,7 @@ will not reflect a usable value. It often reports unreasonably high temperatures, and in some cases the reported temperature declines if the actual temperature increases (similar to the raw PECI temperature value - see PECI specification for details). CPUTIN should therefore be ignored on ASUS -boards. The CPU temperature on ASUS boards is reported from PECI 0. +boards. The CPU temperature on ASUS boards is reported from PECI 0 or TSI 0. + +NCT6796D-S and NCT6799D-R chips are very similar and their chip_id indicates +they are different versions. This driver treats them the same way. diff --git a/Documentation/hwmon/pmbus.rst b/Documentation/hwmon/pmbus.rst index 7ecfec6ca2db..eb1569bfa676 100644 --- a/Documentation/hwmon/pmbus.rst +++ b/Documentation/hwmon/pmbus.rst @@ -163,7 +163,7 @@ Emerson DS1200 power modules might look as follows:: .driver = { .name = "ds1200", }, - .probe_new = ds1200_probe, + .probe = ds1200_probe, .id_table = ds1200_id, }; diff --git a/Documentation/hwmon/smm665.rst b/Documentation/hwmon/smm665.rst deleted file mode 100644 index 481e69d8bf39..000000000000 --- a/Documentation/hwmon/smm665.rst +++ /dev/null @@ -1,187 +0,0 @@ -Kernel driver smm665 -==================== - -Supported chips: - - * Summit Microelectronics SMM465 - - Prefix: 'smm465' - - Addresses scanned: - - - Datasheet: - - http://www.summitmicro.com/prod_select/summary/SMM465/SMM465DS.pdf - - * Summit Microelectronics SMM665, SMM665B - - Prefix: 'smm665' - - Addresses scanned: - - - Datasheet: - - http://www.summitmicro.com/prod_select/summary/SMM665/SMM665B_2089_20.pdf - - * Summit Microelectronics SMM665C - - Prefix: 'smm665c' - - Addresses scanned: - - - Datasheet: - - http://www.summitmicro.com/prod_select/summary/SMM665C/SMM665C_2125.pdf - - * Summit Microelectronics SMM764 - - Prefix: 'smm764' - - Addresses scanned: - - - Datasheet: - - http://www.summitmicro.com/prod_select/summary/SMM764/SMM764_2098.pdf - - * Summit Microelectronics SMM766, SMM766B - - Prefix: 'smm766' - - Addresses scanned: - - - Datasheets: - - http://www.summitmicro.com/prod_select/summary/SMM766/SMM766_2086.pdf - - http://www.summitmicro.com/prod_select/summary/SMM766B/SMM766B_2122.pdf - -Author: Guenter Roeck <linux@roeck-us.net> - - -Module Parameters ------------------ - -* vref: int - Default: 1250 (mV) - - Reference voltage on VREF_ADC pin in mV. It should not be necessary to set - this parameter unless a non-default reference voltage is used. - - -Description ------------ - -[From datasheet] The SMM665 is an Active DC Output power supply Controller -that monitors, margins and cascade sequences power. The part monitors six -power supply channels as well as VDD, 12V input, two general-purpose analog -inputs and an internal temperature sensor using a 10-bit ADC. - -Each monitored channel has its own high and low limits, plus a critical -limit. - -Support for SMM465, SMM764, and SMM766 has been implemented but is untested. - - -Usage Notes ------------ - -This driver does not probe for devices, since there is no register which -can be safely used to identify the chip. You will have to instantiate -the devices explicitly. When instantiating the device, you have to specify -its configuration register address. - -Example: the following will load the driver for an SMM665 at address 0x57 -on I2C bus #1:: - - $ modprobe smm665 - $ echo smm665 0x57 > /sys/bus/i2c/devices/i2c-1/new_device - - -Sysfs entries -------------- - -This driver uses the values in the datasheet to convert ADC register values -into the values specified in the sysfs-interface document. All attributes are -read only. - -Min, max, lcrit, and crit values are used by the chip to trigger external signals -and/or other activity. Triggered signals can include HEALTHY, RST, Power Off, -or Fault depending on the chip configuration. The driver reports values as lcrit -or crit if exceeding the limits triggers RST, Power Off, or Fault, and as min or -max otherwise. For details please see the SMM665 datasheet. - -For SMM465 and SMM764, values for Channel E and F are reported but undefined. - -======================= ======================================================= -in1_input 12V input voltage (mV) -in2_input 3.3V (VDD) input voltage (mV) -in3_input Channel A voltage (mV) -in4_input Channel B voltage (mV) -in5_input Channel C voltage (mV) -in6_input Channel D voltage (mV) -in7_input Channel E voltage (mV) -in8_input Channel F voltage (mV) -in9_input AIN1 voltage (mV) -in10_input AIN2 voltage (mV) - -in1_min 12v input minimum voltage (mV) -in2_min 3.3V (VDD) input minimum voltage (mV) -in3_min Channel A minimum voltage (mV) -in4_min Channel B minimum voltage (mV) -in5_min Channel C minimum voltage (mV) -in6_min Channel D minimum voltage (mV) -in7_min Channel E minimum voltage (mV) -in8_min Channel F minimum voltage (mV) -in9_min AIN1 minimum voltage (mV) -in10_min AIN2 minimum voltage (mV) - -in1_max 12v input maximum voltage (mV) -in2_max 3.3V (VDD) input maximum voltage (mV) -in3_max Channel A maximum voltage (mV) -in4_max Channel B maximum voltage (mV) -in5_max Channel C maximum voltage (mV) -in6_max Channel D maximum voltage (mV) -in7_max Channel E maximum voltage (mV) -in8_max Channel F maximum voltage (mV) -in9_max AIN1 maximum voltage (mV) -in10_max AIN2 maximum voltage (mV) - -in1_lcrit 12v input critical minimum voltage (mV) -in2_lcrit 3.3V (VDD) input critical minimum voltage (mV) -in3_lcrit Channel A critical minimum voltage (mV) -in4_lcrit Channel B critical minimum voltage (mV) -in5_lcrit Channel C critical minimum voltage (mV) -in6_lcrit Channel D critical minimum voltage (mV) -in7_lcrit Channel E critical minimum voltage (mV) -in8_lcrit Channel F critical minimum voltage (mV) -in9_lcrit AIN1 critical minimum voltage (mV) -in10_lcrit AIN2 critical minimum voltage (mV) - -in1_crit 12v input critical maximum voltage (mV) -in2_crit 3.3V (VDD) input critical maximum voltage (mV) -in3_crit Channel A critical maximum voltage (mV) -in4_crit Channel B critical maximum voltage (mV) -in5_crit Channel C critical maximum voltage (mV) -in6_crit Channel D critical maximum voltage (mV) -in7_crit Channel E critical maximum voltage (mV) -in8_crit Channel F critical maximum voltage (mV) -in9_crit AIN1 critical maximum voltage (mV) -in10_crit AIN2 critical maximum voltage (mV) - -in1_crit_alarm 12v input critical alarm -in2_crit_alarm 3.3V (VDD) input critical alarm -in3_crit_alarm Channel A critical alarm -in4_crit_alarm Channel B critical alarm -in5_crit_alarm Channel C critical alarm -in6_crit_alarm Channel D critical alarm -in7_crit_alarm Channel E critical alarm -in8_crit_alarm Channel F critical alarm -in9_crit_alarm AIN1 critical alarm -in10_crit_alarm AIN2 critical alarm - -temp1_input Chip temperature -temp1_min Minimum chip temperature -temp1_max Maximum chip temperature -temp1_crit Critical chip temperature -temp1_crit_alarm Temperature critical alarm -======================= ======================================================= diff --git a/MAINTAINERS b/MAINTAINERS index abfbd804bb5c..657bd6cad820 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -9509,6 +9509,12 @@ S: Maintained W: http://artax.karlin.mff.cuni.cz/~mikulas/vyplody/hpfs/index-e.cgi F: fs/hpfs/ +HS3001 Hardware Temperature and Humidity Sensor +M: Andre Werner <andre.werner@systec-electronic.com> +L: linux-hwmon@vger.kernel.org +S: Maintained +F: drivers/hwmon/hs3001.c + HSI SUBSYSTEM M: Sebastian Reichel <sre@kernel.org> S: Maintained @@ -19625,13 +19631,6 @@ M: Nicolas Pitre <nico@fluxnic.net> S: Odd Fixes F: drivers/net/ethernet/smsc/smc91x.* -SMM665 HARDWARE MONITOR DRIVER -M: Guenter Roeck <linux@roeck-us.net> -L: linux-hwmon@vger.kernel.org -S: Maintained -F: Documentation/hwmon/smm665.rst -F: drivers/hwmon/smm665.c - SMSC EMC2103 HARDWARE MONITOR DRIVER M: Steve Glendinning <steve.glendinning@shawell.net> L: linux-hwmon@vger.kernel.org diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 307477b8a371..ec38c8892158 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -734,6 +734,16 @@ config SENSORS_HIH6130 This driver can also be built as a module. If so, the module will be called hih6130. +config SENSORS_HS3001 + tristate "Renesas HS3001 humidity and temperature sensors" + depends on I2C + help + If you say yes here you get support for the Renesas HS3001, + to HS3004 humidity and temperature sensors. + + This driver can also be built as a module. If so, the module + will be called hs3001. + config SENSORS_IBMAEM tristate "IBM Active Energy Manager temperature/power sensors and control" select IPMI_SI @@ -1951,20 +1961,6 @@ config SENSORS_SFCTEMP This driver can also be built as a module. If so, the module will be called sfctemp. -config SENSORS_SMM665 - tristate "Summit Microelectronics SMM665" - depends on I2C - help - If you say yes here you get support for the hardware monitoring - features of the Summit Microelectronics SMM665/SMM665B Six-Channel - Active DC Output Controller / Monitor. - - Other supported chips are SMM465, SMM665C, SMM764, and SMM766. - Support for those chips is untested. - - This driver can also be built as a module. If so, the module will - be called smm665. - config SENSORS_ADC128D818 tristate "Texas Instruments ADC128D818" depends on I2C diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 3f4b0fda0998..4ac9452b5430 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -86,6 +86,7 @@ obj-$(CONFIG_SENSORS_GSC) += gsc-hwmon.o obj-$(CONFIG_SENSORS_GPIO_FAN) += gpio-fan.o obj-$(CONFIG_SENSORS_GXP_FAN_CTRL) += gxp-fan-ctrl.o obj-$(CONFIG_SENSORS_HIH6130) += hih6130.o +obj-$(CONFIG_SENSORS_HS3001) += hs3001.o obj-$(CONFIG_SENSORS_ULTRA45) += ultra45_env.o obj-$(CONFIG_SENSORS_I5500) += i5500_temp.o obj-$(CONFIG_SENSORS_I5K_AMB) += i5k_amb.o @@ -191,7 +192,6 @@ obj-$(CONFIG_SENSORS_SHT3x) += sht3x.o obj-$(CONFIG_SENSORS_SHT4x) += sht4x.o obj-$(CONFIG_SENSORS_SHTC1) += shtc1.o obj-$(CONFIG_SENSORS_SIS5595) += sis5595.o -obj-$(CONFIG_SENSORS_SMM665) += smm665.o obj-$(CONFIG_SENSORS_SMPRO) += smpro-hwmon.o obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o obj-$(CONFIG_SENSORS_SMSC47M1) += smsc47m1.o diff --git a/drivers/hwmon/ad7418.c b/drivers/hwmon/ad7418.c index ffe81e445010..4829f83ff52e 100644 --- a/drivers/hwmon/ad7418.c +++ b/drivers/hwmon/ad7418.c @@ -16,7 +16,7 @@ #include <linux/hwmon-sysfs.h> #include <linux/err.h> #include <linux/mutex.h> -#include <linux/of_device.h> +#include <linux/of.h> #include <linux/delay.h> #include <linux/slab.h> @@ -253,7 +253,7 @@ static int ad7418_probe(struct i2c_client *client) mutex_init(&data->lock); data->client = client; if (dev->of_node) - data->type = (enum chips)of_device_get_match_data(dev); + data->type = (uintptr_t)of_device_get_match_data(dev); else data->type = i2c_match_id(ad7418_id, client)->driver_data; diff --git a/drivers/hwmon/ads7828.c b/drivers/hwmon/ads7828.c index 1932613ec095..809e830f52a6 100644 --- a/drivers/hwmon/ads7828.c +++ b/drivers/hwmon/ads7828.c @@ -18,7 +18,7 @@ #include <linux/i2c.h> #include <linux/init.h> #include <linux/module.h> -#include <linux/of_device.h> +#include <linux/of.h> #include <linux/platform_data/ads7828.h> #include <linux/regmap.h> #include <linux/slab.h> @@ -139,8 +139,7 @@ static int ads7828_probe(struct i2c_client *client) } if (client->dev.of_node) - chip = (enum ads7828_chips) - of_device_get_match_data(&client->dev); + chip = (uintptr_t)of_device_get_match_data(&client->dev); else chip = i2c_match_id(ads7828_device_ids, client)->driver_data; diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c index c0ce88324ea6..03acadc3a6cb 100644 --- a/drivers/hwmon/adt7475.c +++ b/drivers/hwmon/adt7475.c @@ -10,7 +10,6 @@ */ #include <linux/module.h> -#include <linux/of_device.h> #include <linux/init.h> #include <linux/slab.h> #include <linux/i2c.h> @@ -1653,7 +1652,7 @@ static int adt7475_probe(struct i2c_client *client) i2c_set_clientdata(client, data); if (client->dev.of_node) - chip = (enum chips)of_device_get_match_data(&client->dev); + chip = (uintptr_t)of_device_get_match_data(&client->dev); else chip = id->driver_data; diff --git a/drivers/hwmon/as370-hwmon.c b/drivers/hwmon/as370-hwmon.c index fffbf385a57f..316454bd983d 100644 --- a/drivers/hwmon/as370-hwmon.c +++ b/drivers/hwmon/as370-hwmon.c @@ -11,7 +11,8 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/module.h> -#include <linux/of_device.h> +#include <linux/mod_devicetable.h> +#include <linux/platform_device.h> #define CTRL 0x0 #define PD BIT(0) diff --git a/drivers/hwmon/aspeed-pwm-tacho.c b/drivers/hwmon/aspeed-pwm-tacho.c index d11f674e3dc3..997df4b40509 100644 --- a/drivers/hwmon/aspeed-pwm-tacho.c +++ b/drivers/hwmon/aspeed-pwm-tacho.c @@ -12,8 +12,7 @@ #include <linux/io.h> #include <linux/kernel.h> #include <linux/module.h> -#include <linux/of_device.h> -#include <linux/of_platform.h> +#include <linux/of.h> #include <linux/platform_device.h> #include <linux/regmap.h> #include <linux/reset.h> diff --git a/drivers/hwmon/asus-ec-sensors.c b/drivers/hwmon/asus-ec-sensors.c index f52a539eb33e..51f9c2db403e 100644 --- a/drivers/hwmon/asus-ec-sensors.c +++ b/drivers/hwmon/asus-ec-sensors.c @@ -340,7 +340,7 @@ static const struct ec_board_info board_info_crosshair_x670e_hero = { .sensors = SENSOR_TEMP_CPU | SENSOR_TEMP_CPU_PACKAGE | SENSOR_TEMP_MB | SENSOR_TEMP_VRM | SENSOR_SET_TEMP_WATER, - .mutex_path = ASUS_HW_ACCESS_MUTEX_RMTW_ASMX, + .mutex_path = ACPI_GLOBAL_LOCK_PSEUDO_PATH, .family = family_amd_600_series, }; |