diff options
30 files changed, 1835 insertions, 564 deletions
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt index f06f24d405a5..8238a86686be 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt @@ -22,23 +22,7 @@ Required properties: MIPI TX Configuration Module ============================ -The MIPI TX configuration module controls the MIPI D-PHY. - -Required properties: -- compatible: "mediatek,<chip>-mipi-tx" -- the supported chips are mt2701, 7623, mt8173 and mt8183. -- reg: Physical base address and length of the controller's registers -- clocks: PLL reference clock -- clock-output-names: name of the output clock line to the DSI encoder -- #clock-cells: must be <0>; -- #phy-cells: must be <0>. - -Optional properties: -- drive-strength-microamp: adjust driving current, should be 3000 ~ 6000. And - the step is 200. -- nvmem-cells: A phandle to the calibration data provided by a nvmem device. If - unspecified default values shall be used. -- nvmem-cell-names: Should be "calibration-data" +See phy/mediatek,dsi-phy.yaml Example: diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt index 6b1c586403e4..b284ca51b913 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt @@ -53,23 +53,7 @@ Required properties: HDMI PHY ======== - -The HDMI PHY serializes the HDMI encoder's three channel 10-bit parallel -output and drives the HDMI pads. - -Required properties: -- compatible: "mediatek,<chip>-hdmi-phy" -- the supported chips are mt2701, mt7623 and mt8173 -- reg: Physical base address and length of the module's registers -- clocks: PLL reference clock -- clock-names: must contain "pll_ref" -- clock-output-names: must be "hdmitx_dig_cts" on mt8173 -- #phy-cells: must be <0> -- #clock-cells: must be <0> - -Optional properties: -- mediatek,ibias: TX DRV bias current for <1.65Gbps, defaults to 0xa -- mediatek,ibias_up: TX DRV bias current for >1.65Gbps, defaults to 0x1c +See phy/mediatek,hdmi-phy.yaml Example: diff --git a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt deleted file mode 100644 index 698aacbdcfc4..000000000000 --- a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt +++ /dev/null @@ -1,86 +0,0 @@ -Broadcom STB USB PHY - -Required properties: -- compatible: should be one of - "brcm,brcmstb-usb-phy" - "brcm,bcm7216-usb-phy" - "brcm,bcm7211-usb-phy" - -- reg and reg-names properties requirements are specific to the - compatible string. - "brcm,brcmstb-usb-phy": - - reg: 1 or 2 offset and length pairs. One for the base CTRL registers - and an optional pair for systems with USB 3.x support - - reg-names: not specified - "brcm,bcm7216-usb-phy": - - reg: 3 offset and length pairs for CTRL, XHCI_EC and XHCI_GBL - registers - - reg-names: "ctrl", "xhci_ec", "xhci_gbl" - "brcm,bcm7211-usb-phy": - - reg: 5 offset and length pairs for CTRL, XHCI_EC, XHCI_GBL, - USB_PHY and USB_MDIO registers and an optional pair - for the BDC registers - - reg-names: "ctrl", "xhci_ec", "xhci_gbl", "usb_phy", "usb_mdio", "bdc_ec" - -- #phy-cells: Shall be 1 as it expects one argument for setting - the type of the PHY. Possible values are: - - PHY_TYPE_USB2 for USB1.1/2.0 PHY - - PHY_TYPE_USB3 for USB3.x PHY - -Optional Properties: -- clocks : clock phandles. -- clock-names: String, clock name. -- interrupts: wakeup interrupt -- interrupt-names: "wakeup" -- brcm,ipp: Boolean, Invert Port Power. - Possible values are: 0 (Don't invert), 1 (Invert) -- brcm,ioc: Boolean, Invert Over Current detection. - Possible values are: 0 (Don't invert), 1 (Invert) -- dr_mode: String, PHY Device mode. - Possible values are: "host", "peripheral ", "drd" or "typec-pd" - If this property is not defined, the phy will default to "host" mode. -- brcm,syscon-piarbctl: phandle to syscon for handling config registers -NOTE: one or both of the following two properties must be set -- brcm,has-xhci: Boolean indicating the phy has an XHCI phy. -- brcm,has-eohci: Boolean indicating the phy has an EHCI/OHCI phy. - - -Example: - -usbphy_0: usb-phy@f0470200 { - reg = <0xf0470200 0xb8>, - <0xf0471940 0x6c0>; - compatible = "brcm,brcmstb-usb-phy"; - #phy-cells = <1>; - dr_mode = "host" - brcm,ioc = <1>; - brcm,ipp = <1>; - brcm,has-xhci; - brcm,has-eohci; - clocks = <&usb20>, <&usb30>; - clock-names = "sw_usb", "sw_usb3"; -}; - -usb-phy@29f0200 { - reg = <0x29f0200 0x200>, - <0x29c0880 0x30>, - <0x29cc100 0x534>, - <0x2808000 0x24>, - <0x2980080 0x8>; - reg-names = "ctrl", - "xhci_ec", - "xhci_gbl", - "usb_phy", - "usb_mdio"; - brcm,ioc = <0x0>; - brcm,ipp = <0x0>; - compatible = "brcm,bcm7211-usb-phy"; - interrupts = <0x30>; - interrupt-parent = <&vpu_intr1_nosec_intc>; - interrupt-names = "wake"; - #phy-cells = <0x1>; - brcm,has-xhci; - syscon-piarbctl = <&syscon_piarbctl>; - clocks = <&scmi_clk 256>; - clock-names = "sw_usb"; -}; diff --git a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml new file mode 100644 index 000000000000..0497368d1fca --- /dev/null +++ b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml @@ -0,0 +1,196 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/brcm,brcmstb-usb-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom STB USB PHY + +description: Broadcom's PHY that handles EHCI/OHCI and/or XHCI + +maintainers: + - Al Cooper <alcooperx@gmail.com> + - Rafał Miłecki <rafal@milecki.pl> + +properties: + compatible: + enum: + - brcm,bcm4908-usb-phy + - brcm,bcm7211-usb-phy + - brcm,bcm7216-usb-phy + - brcm,brcmstb-usb-phy + + reg: + minItems: 1 + maxItems: 6 + items: + - description: the base CTRL register + - description: XHCI EC register + - description: XHCI GBL register + - description: USB PHY register + - description: USB MDIO register + - description: BDC register + + reg-names: + minItems: 1 + maxItems: 6 + items: + - const: ctrl + - const: xhci_ec + - const: xhci_gbl + - const: usb_phy + - const: usb_mdio + - const: bdc_ec + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + maxItems: 2 + items: + - const: sw_usb + - const: sw_usb3 + + interrupts: + description: wakeup interrupt + + interrupt-names: + const: wake + + brcm,ipp: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Invert Port Power + minimum: 0 + maximum: 1 + + brcm,ioc: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Invert Over Current detection + minimum: 0 + maximum: 1 + + dr_mode: + description: PHY Device mode. If this property is not defined, the PHY will + default to "host" mode. + enum: + - host + - peripheral + - drd + - typec-pd + + brcm,syscon-piarbctl: + description: phandle to syscon for handling config registers + $ref: /schemas/types.yaml#/definitions/phandle + + brcm,has-xhci: + description: Indicates the PHY has an XHCI PHY. + type: boolean + + brcm,has-eohci: + description: Indicates the PHY has an EHCI/OHCI PHY. + type: boolean + + "#phy-cells": + description: | + Cell allows setting the type of the PHY. Possible values are: + - PHY_TYPE_USB2 for USB1.1/2.0 PHY + - PHY_TYPE_USB3 for USB3.x PHY + const: 1 + +required: + - reg + - "#phy-cells" + +anyOf: + - required: + - brcm,has-xhci + - required: + - brcm,has-eohci + +allOf: + - if: + properties: + compatible: + contains: + enum: + - const: brcm,bcm4908-usb-phy + - const: brcm,brcmstb-usb-phy + then: + properties: + reg: + minItems: 1 + maxItems: 2 + - if: + properties: + compatible: + contains: + const: brcm,bcm7211-usb-phy + then: + properties: + reg: + minItems: 5 + maxItems: 6 + reg-names: + minItems: 5 + maxItems: 6 + - if: + properties: + compatible: + contains: + const: brcm,bcm7216-usb-phy + then: + properties: + reg: + minItems: 3 + maxItems: 3 + reg-names: + minItems: 3 + maxItems: 3 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/phy/phy.h> + + usb-phy@f0470200 { + compatible = "brcm,brcmstb-usb-phy"; + reg = <0xf0470200 0xb8>, + <0xf0471940 0x6c0>; + #phy-cells = <1>; + dr_mode = "host"; + brcm,ioc = <1>; + brcm,ipp = <1>; + brcm,has-xhci; + brcm,has-eohci; + clocks = <&usb20>, <&usb30>; + clock-names = "sw_usb", "sw_usb3"; + }; + - | + #include <dt-bindings/phy/phy.h> + + usb-phy@29f0200 { + compatible = "brcm,bcm7211-usb-phy"; + reg = <0x29f0200 0x200>, + <0x29c0880 0x30>, + <0x29cc100 0x534>, + <0x2808000 0x24>, + <0x2980080 0x8>; + reg-names = "ctrl", + "xhci_ec", + "xhci_gbl", + "usb_phy", + "usb_mdio"; + brcm,ioc = <0x0>; + brcm,ipp = <0x0>; + interrupts = <0x30>; + interrupt-parent = <&vpu_intr1_nosec_intc>; + interrupt-names = "wake"; + #phy-cells = <0x1>; + brcm,has-xhci; + brcm,syscon-piarbctl = <&syscon_piarbctl>; + clocks = <&scmi_clk 256>; + clock-names = "sw_usb"; + }; diff --git a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml new file mode 100644 index 000000000000..71d4acea1f66 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2020 MediaTek +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/mediatek,dsi-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MIPI Display Serial Interface (DSI) PHY binding + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@kernel.org> + - Philipp Zabel <p.zabel@pengutronix.de> + - Chunfeng Yun <chunfeng.yun@mediatek.com> + +description: The MIPI DSI PHY supports up to 4-lane output. + +properties: + $nodename: + pattern: "^dsi-phy@[0-9a-f]+$" + + compatible: + enum: + - mediatek,mt2701-mipi-tx + - mediatek,mt7623-mipi-tx + - mediatek,mt8173-mipi-tx + - mediatek,mt8183-mipi-tx + + reg: + maxItems: 1 + + clocks: + items: + - description: PLL reference clock + + clock-output-names: + maxItems: 1 + + "#phy-cells": + const: 0 + + "#clock-cells": + const: 0 + + nvmem-cells: + maxItems: 1 + description: A phandle to the calibration data provided by a nvmem device, + if unspecified, default values shall be used. + + nvmem-cell-names: + items: + - const: calibration-data + + drive-strength-microamp: + description: adjust driving current + multipleOf: 200 + minimum: 2000 + maximum: 6000 + default: 4600 + +required: + - compatible + - reg + - clocks + - clock-output-names + - "#phy-cells" + - "#clock-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8173-clk.h> + dsi-phy@10215000 { + compatible = "mediatek,mt8173-mipi-tx"; + reg = <0x10215000 0x1000>; + clocks = <&clk26m>; + clock-output-names = "mipi_tx0_pll"; + drive-strength-microamp = <4000>; + nvmem-cells= <&mipi_tx_calibration>; + nvmem-cell-names = "calibration-data"; + #clock-cells = <0>; + #phy-cells = <0>; + }; + +... diff --git a/Documentation/devicetree/bindings/phy/mediatek,hdmi-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,hdmi-phy.yaml new file mode 100644 index 000000000000..4752517a1446 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/mediatek,hdmi-phy.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2020 MediaTek +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/mediatek,hdmi-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek High Definition Multimedia Interface (HDMI) PHY binding + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@kernel.org> + - Philipp Zabel <p.zabel@pengutronix.de> + - Chunfeng Yun <chunfeng.yun@mediatek.com> + +description: | + The HDMI PHY serializes the HDMI encoder's three channel 10-bit parallel + output and drives the HDMI pads. + +properties: + $nodename: + pattern: "^hdmi-phy@[0-9a-f]+$" + + compatible: + enum: + - mediatek,mt2701-hdmi-phy + - mediatek,mt7623-hdmi-phy + - mediatek,mt8173-hdmi-phy + + reg: + maxItems: 1 + + clocks: + items: + - description: PLL reference clock + + clock-names: + items: + - const: pll_ref + + clock-output-names: + items: + - const: hdmitx_dig_cts + + "#phy-cells": + const: 0 + + "#clock-cells": + const: 0 + + mediatek,ibias: + description: + TX DRV bias current for < 1.65Gbps + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 63 + default: 0xa + + mediatek,ibias_up: + description: + TX DRV bias current for >= 1.65Gbps + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 63 + default: 0x1c + +required: + - compatible + - reg + - clocks + - clock-names + - clock-output-names + - "#phy-cells" + - "#clock-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8173-clk.h> + hdmi_phy: hdmi-phy@10209100 { + compatible = "mediatek,mt8173-hdmi-phy"; + reg = <0x10209100 0x24>; + clocks = <&apmixedsys CLK_APMIXED_HDMI_REF>; + clock-names = "pll_ref"; + clock-output-names = "hdmitx_dig_cts"; + mediatek,ibias = <0xa>; + mediatek,ibias_up = <0x1c>; + #clock-cells = <0>; + #phy-cells = <0>; + }; + +... diff --git a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml new file mode 100644 index 000000000000..602e6ff45785 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml @@ -0,0 +1,260 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2020 MediaTek +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/mediatek,tphy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek T-PHY Controller Device Tree Bindings + +maintainers: + - Chunfeng Yun <chunfeng.yun@mediatek.com> + +description: | + The T-PHY controller supports physical layer functionality for a number of + controllers on MediaTek SoCs, includes USB2.0, USB3.0, PCIe and SATA. + + Layout differences of banks between T-PHY V1 (mt8173/mt2701) and + T-PHY V2 (mt2712) when works on USB mode: + ----------------------------------- + Version 1: + port offset bank + shared 0x0000 SPLLC + 0x0100 FMREG + u2 port0 0x0800 U2PHY_COM + u3 port0 0x0900 U3PHYD + 0x0a00 U3PHYD_BANK2 + 0x0b00 U3PHYA + 0x0c00 U3PHYA_DA + u2 port1 0x1000 U2PHY_COM + u3 port1 0x1100 U3PHYD + 0x1200 U3PHYD_BANK2 + 0x1300 U3PHYA + 0x1400 U3PHYA_DA + u2 port2 0x1800 U2PHY_COM + ... + + Version 2: + port offset bank + u2 port0 0x0000 MISC + 0x0100 FMREG + 0x0300 U2PHY_COM + u3 port0 0x0700 SPLLC + 0x0800 CHIP + 0x0900 U3PHYD + 0x0a00 U3PHYD_BANK2 + 0x0b00 U3PHYA + 0x0c00 U3PHYA_DA + u2 port1 0x1000 MISC + 0x1100 FMREG + 0x1300 U2PHY_COM + u3 port1 0x1700 SPLLC + 0x1800 CHIP + 0x1900 U3PHYD + 0x1a00 U3PHYD_BANK2 + 0x1b00 U3PHYA + 0x1c00 U3PHYA_DA + u2 port2 0x2000 MISC + ... + + SPLLC shared by u3 ports and FMREG shared by u2 ports on V1 are put back + into each port; a new bank MISC for u2 ports and CHIP for u3 ports are + added on V2. + +properties: + $nodename: + pattern: "^t-phy@[0-9a-f]+$" + + compatible: + oneOf: + - items: + - enum: + - mediatek,mt2701-tphy + - mediatek,mt7623-tphy + - mediatek,mt7622-tphy + - mediatek,mt8516-tphy + - const: mediatek,generic-tphy-v1 + - items: + - enum: + - mediatek,mt2712-tphy + - mediatek,mt7629-tphy + - mediatek,mt8183-tphy + - const: mediatek,generic-tphy-v2 + - const: mediatek,mt2701-u3phy + deprecated: true + - const: mediatek,mt2712-u3phy + deprecated: true + - const: mediatek,mt8173-u3phy + + reg: + description: + Register shared by multiple ports, exclude port's private register. + It is needed for T-PHY V1, such as mt2701 and mt8173, but not for + T-PHY V2, such as mt2712. + maxItems: 1 + + "#address-cells": + enum: [1, 2] + + "#size-cells": + enum: [1, 2] + + # Used with non-empty value if optional 'reg' is not provided. + # The format of the value is an arbitrary number of triplets of + # (child-bus-address, parent-bus-address, length). + ranges: true + + mediatek,src-ref-clk-mhz: + description: + Frequency of reference clock for slew rate calibrate + default: 26 + + mediatek,src-coef: + description: + Coefficient for slew rate calibrate, depends on SoC process + $ref: /schemas/types.yaml#/definitions/uint32 + default: 28 + +# Required child node: +patternProperties: + "^usb-phy@[0-9a-f]+$": + type: object + description: + A sub-node is required for each port the controller provides. + Address range information including the usual 'reg' property + is used inside these nodes to describe the controller's topology. + + properties: + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + items: + - description: Reference clock, (HS is 48Mhz, SS/P is 24~27Mhz) + - description: Reference clock of analog phy + description: + Uses both clocks if the clock of analog and digital phys are + separated, otherwise uses "ref" clock only if needed. + + clock-names: + minItems: 1 + maxItems: 2 + items: + - const: ref + - const: da_ref + + "#phy-cells": + const: 1 + description: | + The cells contain the following arguments. + + - description: The PHY type + enum: + - PHY_TYPE_USB2 + - PHY_TYPE_USB3 + - PHY_TYPE_PCIE + - PHY_TYPE_SATA + + # The following optional vendor properties are only for debug or HQA test + mediatek,eye-src: + description: + The value of slew rate calibrate (U2 phy) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 7 + + mediatek,eye-vrt: + description: + The selection of VRT reference voltage (U2 phy) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 7 + + mediatek,eye-term: + description: + The selection of HS_TX TERM reference voltage (U2 phy) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 7 + + mediatek,intr: + description: + The selection of internal resistor (U2 phy) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 31 + + mediatek,discth: + description: + The selection of disconnect threshold (U2 phy) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 15 + + mediatek,bc12: + description: + Specify the flag to enable BC1.2 if support it + type: boolean + + required: + - reg + - "#phy-cells" + + additionalProperties: false + +required: + - compatible + - "#address-cells" + - "#size-cells" + - ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/phy/phy.h> + usb@11271000 { + compatible = "mediatek,mt8173-mtu3", "mediatek,mtu3"; + reg = <0x11271000 0x3000>, <0x11280700 0x0100>; + reg-names = "mac", "ippc"; + phys = <&u2port0 PHY_TYPE_USB2>, + <&u3port0 PHY_TYPE_USB3>, + <&u2port1 PHY_TYPE_USB2>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_USB30_SEL>; + clock-names = "sys_ck"; + }; + + t-phy@11290000 { + compatible = "mediatek,mt8173-u3phy"; + reg = <0x11290000 0x800>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + u2port0: usb-phy@11290800 { + reg = <0x11290800 0x100>; + clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>, <&clk48m>; + clock-names = "ref", "da_ref"; + #phy-cells = <1>; + }; + + u3port0: usb-phy@11290900 { + reg = <0x11290900 0x700>; + clocks = <&clk26m>; + clock-names = "ref"; + #phy-cells = <1>; + }; + + u2port1: usb-phy@11291000 { + reg = <0x11291000 0x100>; + #phy-cells = <1>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/phy/mediatek,ufs-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,ufs-phy.yaml new file mode 100644 index 000000000000..3a9be82e7f13 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/mediatek,ufs-phy.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2020 MediaTek +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/mediatek,ufs-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Universal Flash Storage (UFS) M-PHY binding + +maintainers: + - Stanley Chu <stanley.chu@mediatek.com> + - Chunfeng Yun <chunfeng.yun@mediatek.com> + +description: | + UFS M-PHY nodes are defined to describe on-chip UFS M-PHY hardware macro. + Each UFS M-PHY node should have its own node. + To bind UFS M-PHY with UFS host controller, the controller node should + contain a phandle reference to UFS M-PHY node. + +properties: + $nodename: + pattern: "^ufs-phy@[0-9a-f]+$" + + compatible: + const: mediatek,mt8183-ufsphy + + reg: + maxItems: 1 + + clocks: + items: + - description: Unipro core control clock. + - description: M-PHY core control clock. + + clock-names: + items: + - const: unipro + - const: mp + + "#phy-cells": + const: 0 + +required: + - compatible + - reg + - "#phy-cells" + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8183-clk.h> + ufsphy: ufs-phy@11fa0000 { + compatible = "mediatek,mt8183-ufsphy"; + reg = <0x11fa0000 0xc000>; + clocks = <&infracfg CLK_INFRA_UNIPRO_SCK>, + <&infracfg CLK_INFRA_UFS_MP_SAP_BCLK>; + clock-names = "unipro", "mp"; + #phy-cells = <0>; + }; + +... diff --git a/Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml new file mode 100644 index 000000000000..598fd2b95c29 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml @@ -0,0 +1,199 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2020 MediaTek +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/mediatek,xsphy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek XS-PHY Controller Device Tree Bindings + +maintainers: + - Chunfeng Yun <chunfeng.yun@mediatek.com> + +descript |