diff options
| -rw-r--r-- | Documentation/devicetree/bindings/net/dsa/qca8k.yaml | 22 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/net/ethernet-controller.yaml | 35 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/net/ethernet-phy.yaml | 43 | ||||
| -rw-r--r-- | Documentation/leds/well-known-leds.txt | 30 | ||||
| -rw-r--r-- | arch/arm/boot/dts/armada-370-rd.dts | 12 | ||||
| -rw-r--r-- | arch/arm/boot/dts/qcom-ipq8064-rb3011.dts | 124 | ||||
| -rw-r--r-- | drivers/net/dsa/qca/Kconfig | 8 | ||||
| -rw-r--r-- | drivers/net/dsa/qca/Makefile | 3 | ||||
| -rw-r--r-- | drivers/net/dsa/qca/qca8k-8xxx.c | 20 | ||||
| -rw-r--r-- | drivers/net/dsa/qca/qca8k-leds.c | 277 | ||||
| -rw-r--r-- | drivers/net/dsa/qca/qca8k.h | 74 | ||||
| -rw-r--r-- | drivers/net/dsa/qca/qca8k_leds.h | 16 | ||||
| -rw-r--r-- | drivers/net/phy/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/net/phy/marvell.c | 81 | ||||
| -rw-r--r-- | drivers/net/phy/phy_device.c | 103 | ||||
| -rw-r--r-- | include/linux/leds.h | 18 | ||||
| -rw-r--r-- | include/linux/phy.h | 41 |
17 files changed, 884 insertions, 24 deletions
diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml index fe9ebe285938..df64eebebe18 100644 --- a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml +++ b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml @@ -18,6 +18,8 @@ description: PHY it is connected to. In this config, an internal mdio-bus is registered and the MDIO master is used for communication. Mixed external and internal mdio-bus configurations are not supported by the hardware. + Each phy has at most 3 LEDs connected and can be declared + using the standard LEDs structure. properties: compatible: @@ -117,6 +119,7 @@ unevaluatedProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/leds/common.h> mdio { #address-cells = <1>; @@ -226,6 +229,25 @@ examples: label = "lan1"; phy-mode = "internal"; phy-handle = <&internal_phy_port1>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_AMBER>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; }; port@2 { diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml index 00be387984ac..ebc2646ab5ff 100644 --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml @@ -222,6 +222,41 @@ properties: required: - speed + leds: + description: + Describes the LEDs associated by Ethernet Controller. + These LEDs are not integrated in the PHY and PHY doesn't have any + control on them. Ethernet Controller regs are used to control + these defined LEDs. + + type: object + + properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + patternProperties: + '^led@[a-f0-9]+$': + $ref: /schemas/leds/common.yaml# + + properties: + reg: + maxItems: 1 + description: + This define the LED index in the PHY or the MAC. It's really + driver dependent and required for ports that define multiple + LED for the same port. + + required: + - reg + + unevaluatedProperties: false + + additionalProperties: false + dependencies: pcs-handle-names: [pcs-handle] diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml index ac04f8efa35c..4f574532ee13 100644 --- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml @@ -197,6 +197,35 @@ properties: PHY's that have configurable TX internal delays. If this property is present then the PHY applies the TX delay. + leds: + type: object + + properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + patternProperties: + '^led@[a-f0-9]+$': + $ref: /schemas/leds/common.yaml# + + properties: + reg: + maxItems: 1 + description: + This define the LED index in the PHY or the MAC. It's really + driver dependent and required for ports that define multiple + LED for the same port. + + required: + - reg + + unevaluatedProperties: false + + additionalProperties: false + required: - reg @@ -204,6 +233,8 @@ additionalProperties: true examples: - | + #include <dt-bindings/leds/common.h> + ethernet { #address-cells = <1>; #size-cells = <0>; @@ -219,5 +250,17 @@ examples: reset-gpios = <&gpio1 4 1>; reset-assert-us = <1000>; reset-deassert-us = <2000>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; }; }; diff --git a/Documentation/leds/well-known-leds.txt b/Documentation/leds/well-known-leds.txt index 2160382c86be..e9c30dc75884 100644 --- a/Documentation/leds/well-known-leds.txt +++ b/Documentation/leds/well-known-leds.txt @@ -70,3 +70,33 @@ Good: "platform:*:charging" (allwinner sun50i) * Screen Good: ":backlight" (Motorola Droid 4) + +* Ethernet LEDs + +Currently two types of Network LEDs are support, those controlled by +the PHY and those by the MAC. In theory both can be present at the +same time for one Linux netdev, hence the names need to differ between +MAC and PHY. + +Do not use the netdev name, such as eth0, enp1s0. These are not stable +and are not unique. They also don't differentiate between MAC and PHY. + +** MAC LEDs + +Good: f1070000.ethernet:white:WAN +Good: mdio_mux-0.1:00:green:left +Good: 0000:02:00.0:yellow:top + +The first part must uniquely name the MAC controller. Then follows the +colour. WAN/LAN should be used for a single LED. If there are +multiple LEDs, use left/right, or top/bottom to indicate their +position on the RJ45 socket. + +** PHY LEDs + +Good: f1072004.mdio-mii:00: white:WAN +Good: !mdio-mux!mdio@2!switch@0!mdio:01:green:right +Good: r8169-0-200:00:yellow:bottom + +The first part must uniquely name the PHY. This often means uniquely +identifying the MDIO bus controller, and the address on the bus. diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts index be005c9f42ef..2586f32a3e21 100644 --- a/arch/arm/boot/dts/armada-370-rd.dts +++ b/arch/arm/boot/dts/armada-370-rd.dts @@ -20,6 +20,7 @@ /dts-v1/; #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/leds/common.h> #include <dt-bindings/gpio/gpio.h> #include "armada-370.dtsi" @@ -135,6 +136,17 @@ pinctrl-names = "default"; phy0: ethernet-phy@0 { reg = <0>; + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_WAN; + default-state = "keep"; + }; + }; }; switch: switch@10 { diff --git a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts index f908889c4f95..4d509876294b 100644 --- a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts +++ b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts @@ -38,8 +38,6 @@ switch0: switch@10 { compatible = "qca,qca8337"; - #address-cells = <1>; - #size-cells = <0>; dsa,member = <0 0>; @@ -67,26 +65,86 @@ port@1 { reg = <1>; label = "sw1"; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; }; port@2 { reg = <2>; label = "sw2"; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; }; port@3 { reg = <3>; label = "sw3"; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; }; port@4 { reg = <4>; label = "sw4"; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; }; port@5 { reg = <5>; label = "sw5"; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; }; }; }; @@ -105,8 +163,6 @@ switch1: switch@14 { compatible = "qca,qca8337"; - #address-cells = <1>; - #size-cells = <0>; dsa,member = <1 0>; @@ -134,26 +190,86 @@ port@1 { reg = <1>; label = "sw6"; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; }; port@2 { reg = <2>; label = "sw7"; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; }; port@3 { reg = <3>; label = "sw8"; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; }; port@4 { reg = <4>; label = "sw9"; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; }; port@5 { reg = <5>; label = "sw10"; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; }; }; }; diff --git a/drivers/net/dsa/qca/Kconfig b/drivers/net/dsa/qca/Kconfig index ba339747362c..7a86d6d6a246 100644 --- a/drivers/net/dsa/qca/Kconfig +++ b/drivers/net/dsa/qca/Kconfig @@ -15,3 +15,11 @@ config NET_DSA_QCA8K help This enables support for the Qualcomm Atheros QCA8K Ethernet switch chips. + +config NET_DSA_QCA8K_LEDS_SUPPORT + bool "Qualcomm Atheros QCA8K Ethernet switch family LEDs support" + depends on NET_DSA_QCA8K + depends on LEDS_CLASS + help + This enabled support for LEDs present on the Qualcomm Atheros + QCA8K Ethernet switch chips. diff --git a/drivers/net/dsa/qca/Makefile b/drivers/net/dsa/qca/Makefile index 701f1d199e93..ce66b1984e5f 100644 --- a/drivers/net/dsa/qca/Makefile +++ b/drivers/net/dsa/qca/Makefile @@ -2,3 +2,6 @@ obj-$(CONFIG_NET_DSA_AR9331) += ar9331.o obj-$(CONFIG_NET_DSA_QCA8K) += qca8k.o qca8k-y += qca8k-common.o qca8k-8xxx.o +ifdef CONFIG_NET_DSA_QCA8K_LEDS_SUPPORT +qca8k-y += qca8k-leds.o +endif diff --git a/drivers/net/dsa/qca/qca8k-8xxx.c b/drivers/net/dsa/qca/qca8k-8xxx.c index 62810903f1b3..6d5ac7588a69 100644 --- a/drivers/net/dsa/qca/qca8k-8xxx.c +++ b/drivers/net/dsa/qca/qca8k-8xxx.c @@ -22,6 +22,7 @@ #include <linux/dsa/tag_qca.h> #include "qca8k.h" +#include "qca8k_leds.h" static void qca8k_split_addr(u32 regaddr, u16 *r1, u16 *r2, u16 *page) @@ -772,21 +773,6 @@ err_clear_skb: return ret; } -static u32 -qca8k_port_to_phy(int port) -{ - /* From Andrew Lunn: - * Port 0 has no internal phy. - * Port 1 has an internal PHY at MDIO address 0. - * Port 2 has an internal PHY at MDIO address 1. - * ... - * Port 5 has an internal PHY at MDIO address 4. - * Port 6 has no internal PHY. - */ - - return port - 1; -} - static int qca8k_mdio_busy_wait(struct mii_bus *bus, u32 reg, u32 mask) { @@ -1797,6 +1783,10 @@ qca8k_setup(struct dsa_switch *ds) if (ret) return ret; + ret = qca8k_setup_led_ctrl(priv); + if (ret) + return ret; + qca8k_setup_pcs(priv, &priv->pcs_port_0, 0); qca8k_setup_pcs(priv, &priv->pcs_port_6, 6); diff --git a/drivers/net/dsa/qca/qca8k-leds.c b/drivers/net/dsa/qca/qca8k-leds.c new file mode 100644 index 000000000000..b883692b7d86 --- /dev/null +++ b/drivers/net/dsa/qca/qca8k-leds.c @@ -0,0 +1,277 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <linux/regmap.h> +#include <net/dsa.h> + +#include "qca8k.h" +#include "qca8k_leds.h" + +static int +qca8k_get_enable_led_reg(int port_num, int led_num, struct qca8k_led_pattern_en *reg_info) +{ + switch (port_num) { + case 0: + reg_info->reg = QCA8K_LED_CTRL_REG(led_num); + reg_info->shift = QCA8K_LED_PHY0123_CONTROL_RULE_SHIFT; + break; + case 1: + case 2: + case 3: + /* Port 123 are controlled on a different reg */ + reg_info->reg = QCA8K_LED_CTRL3_REG; + reg_info->shift = QCA8K_LED_PHY123_PATTERN_EN_SHIFT(port_num, led_num); + break; + case 4: + reg_info->reg = QCA8K_LED_CTRL_REG(led_num); + reg_info->shift = QCA8K_LED_PHY4_CONTROL_RULE_SHIFT; + break; + default: + return -EINVAL; + } + + return 0; +} + +static int +qca8k_led_brightness_set(struct qca8k_led *led, + enum led_brightness brightness) +{ + struct qca8k_led_pattern_en reg_info; + struct qca8k_priv *priv = led->priv; + u32 mask, val; + + qca8k_get_enable_led_reg(led->port_num, led->led_num, ®_info); + + val = QCA8K_LED_ALWAYS_OFF; + if (brightness) + val = QCA8K_LED_ALWAYS_ON; + + /* HW regs to control brightness is special and port 1-2-3 + * are placed in a different reg. + * + * To control port 0 brightness: + * - the 2 bit (15, 14) of: + * - QCA8K_LED_CTRL0_REG for led1 + * - QCA8K_LED_CTRL1_REG for led2 + * - QCA8K_LED_CTRL2_REG for led3 + * + * To control port 4: + * - the 2 bit (31, 30) of: + * - QCA8K_LED_CTRL0_REG for led1 + * - QCA8K_LED_CTRL1_REG for led2 + * - QCA8K_LED_CTRL2_REG for led3 + * + * To control port 1: + * - the 2 bit at (9, 8) of QCA8K_LED_CTRL3_REG are used for led1 + * - the 2 bit at (11, 10) of QCA8K_LED_CTRL3_REG are used for led2 + * - the 2 bit at (13, 12) of QCA8K_LED_CTRL3_REG are used for led3 + * + * To control port 2: + * - the 2 bit at (15, 14) of QCA8K_LED_CTRL3_REG are used for led1 + * - the 2 bit at (17, 16) of QCA8K_LED_CTRL3_REG are used for led2 + * - the 2 bit at (19, 18) of QCA8K_LED_CTRL3_REG are used for led3 + * + * To control port 3: + * - the 2 bit at (21, 20) of QCA8K_LED_CTRL3_REG are used for led1 + * - the 2 bit at (23, 22) of QCA8K_LED_CTRL3_REG are used for led2 + * - the 2 bit at (25, 24) of QCA8K_LED_CTRL3_REG are used for led3 + * + * To abstract this and have less code, we use the port and led numm + * to calculate the shift and the correct reg due to this problem of + * not having a 1:1 map of LED with the regs. + */ + if (led->port_num == 0 || led->port_num == 4) { + mask = QCA8K_LED_PATTERN_EN_MASK; + val <<= QCA8K_LED_PATTERN_EN_SHIFT; + } else { + mask = QCA8K_LED_PHY123_PATTERN_EN_MASK; + } + + return regmap_update_bits(priv->regmap, reg_info.reg, + mask << reg_info.shift, + val << reg_info.shift); +} + +static int +qca8k_cled_brightness_set_blocking(struct led_classdev *ldev, + enum led_brightness brightness) +{ + struct qca8k_led *led = container_of(ldev, struct qca8k_led, cdev); + + return qca8k_led_brightness_set(led, brightness); +} + +static enum led_brightness +qca8k_led_brightness_get(struct qca8k_led *led) +{ + struct qca8k_led_pattern_en reg_info; + struct qca8k_priv *priv = led->priv; + u32 val; + int ret; + + qca8k_get_enable_led_reg(led->port_num, led->led_num, ®_info); + + ret = regmap_read(priv->regmap, reg_info.reg, &val); + if (ret) + return 0; + + val >>= reg_info.shift; + + if (led->port_num == 0 || led->port_num == 4) { + val &= QCA8K_LED_PATTERN_EN_MASK; + val >>= QCA8K_LED_PATTERN_EN_SHIFT; + } else { + val &= QCA8K_LED_PHY123_PATTERN_EN_MASK; + } + + /* Assume brightness ON only when the LED is set to always ON */ + return val == QCA8K_LED_ALWAYS_ON; +} + +static int +qca8k_cled_blink_set(struct led_classdev *ldev, + unsigned long *delay_on, + unsigned long *delay_off) +{ + struct qca8k_led *led = container_of(ldev, struct qca8k_led, cdev); + u32 mask, val = QCA8K_LED_ALWAYS_BLINK_4HZ; + struct qca8k_led_pattern_en reg_info; + struct qca8k_priv *priv = led->priv; + + if (*delay_on == 0 && *delay_off == 0) { + *delay_on = 125; + *delay_off = 125; + } + + if (*delay_on != 125 || *delay_off != 125) { + /* The hardware only supports blinking at 4Hz. Fall back + * to software implementation in other cases. + */ + return -EINVAL; + } + + qca8k_get_enable_led_reg(led->port_num, led->led_num, ®_info); + + if (led->port_num == 0 || led->port_num == 4) { + mask = QCA8K_LED_PATTERN_EN_MASK; + val <<= QCA8K_LED_PATTERN_EN_SHIFT; + } else { + mask = QCA8K_LED_PHY123_PATTERN_EN_MASK; + } + + regmap_update_bits(priv->regmap, reg_info.reg, mask << reg_info.shift, + val << reg_info.shift); + + return 0; +} + +static int +qca8k_parse_port_leds(struct qca8k_priv *priv, struct fwnode_handle *port, int port_num) +{ + struct fwnode_handle *led = NULL, *leds = NULL; + struct led_init_data init_data = { }; + struct dsa_switch *ds = priv->ds; + enum led_default_state state; + struct qca8k_led *port_led; + int led_num, led_index; + int ret; + + leds = fwnode_get_named_child_node(port, "leds"); + if (!leds) { + dev_dbg(priv->dev, "No Leds node specified in device tree for port %d!\n", + port_num); + return 0; + } + + fwnode_for_each_child_node(leds, led) { + /* Reg represent the led number of the port. + * Each port can have at most 3 leds attached + * Commonly: + * 1. is gigabit led + * 2. is mbit led + * 3. additional status led + */ + if (fwnode_property_read_u32(led, "reg", &led_num)) + continue; + + if (led_num >= QCA8K_LED_PORT_COUNT) { + dev_warn(priv->dev, "Invalid LED reg %d defined for port %d", + led_num, port_num); + continue; + } + + led_index = QCA8K_LED_PORT_INDEX(port_num, led_num); + + port_led = &priv->ports_led[led_index]; + port_led->port_num = port_num; + port_led->led_num = led_num; + port_led->priv = priv; + + state = led_init_default_state_get(led); + switch (state) { + case LEDS_DEFSTATE_ON: + port_led->cdev.brightness = 1; + qca8k_led_brightness_set(port_led, 1); + break; + case LEDS_DEFSTATE_KEEP: + port_led->cdev.brightness = + qca8k_led_brightness_get(port_led); + break; + default: + port_led->cdev.brightness = 0; + qca8k_led_brightness_set(port_led, 0); + } + + port_led->cdev.max_brightness = 1; + port_led->cdev.brightness_set_blocking = qca8k_cled_brightness_set_blocking; + port_led->cdev.blink_set = qca8k_cled_blink_set; + init_data.default_label = ":port"; + init_data.fwnode = led; + init_data.devname_mandatory = true; + init_data.devicename = kasprintf(GFP_KERNEL, "%s:0%d", ds->slave_mii_bus->id, + port_num); + if (!init_data.devicename) + return -ENOMEM; + + ret = devm_led_classdev_register_ext(priv->dev, &port_led->cdev, &init_data); + if (ret) + dev_warn(priv->dev, "Failed to init LED %d for port %d", led_num, port_num); + + kfree(init_data.devicename); + } + + return 0; +} + +int +qca8k_setup_led_ctrl(struct qca8k_priv *priv) +{ + struct fwnode_handle *ports, *port; + int port_num; + int ret; + + ports = device_get_named_child_node(priv->dev, "ports"); + if (!ports) { + dev_info(priv->dev, "No ports node specified in device tree!"); + return 0; + } + + fwnode_for_each_child_node(ports, port) { + if (fwnode_property_read_u32(port, "reg", &port_num)) + continue; + + /* Skip checking for CPU port 0 and CPU port 6 as not supported */ + if (port_num == 0 || port_num == 6) + continue; + + /* Each port can have at most 3 different leds attached. + * Switch port starts from 0 to 6, but port 0 and 6 are CPU + * port. The port index needs to be decreased by one to identify + * the correct port for LED setup. + */ + ret = qca8k_parse_port_leds(priv, port, qca8k_port_to_phy(port_num)); + if (ret) + return ret; + } + + return 0; +} diff --git a/drivers/net/dsa/qca/qca8k.h b/drivers/net/dsa/qca/qca8k.h index 7996975d29d3..c5cc8a172d65 100644 --- a/drivers/net/dsa/qca/qca8k.h +++ b/drivers/net/dsa/qca/qca8k.h @@ -11,6 +11,7 @@ #include <linux/delay.h> #include <linux/regmap.h> #include <linux/gpio.h> +#include <linux/leds.h> #include <linux/dsa/tag_qca.h> #define QCA8K_ETHERNET_MDIO_PRIORITY 7 @@ -85,6 +86,51 @@ #define QCA8K_MDIO_MASTER_DATA(x) FIELD_PREP(QCA8K_MDIO_MASTER_DATA_MASK, x) #define QCA8K_MDIO_MASTER_MAX_PORTS 5 #define QCA8K_MDIO_MASTER_MAX_REG 32 + +/* LED control register */ +#define QCA8K_LED_PORT_COUNT 3 +#define QCA8K_LED_COUNT ((QCA8K_NUM_PORTS - QCA8K_NUM_CPU_PORTS) * QCA8K_LED_PORT_COUNT) +#define QCA8K_LED_RULE_COUNT 6 +#define QCA8K_LED_RULE_MAX 11 +#define QCA8K_LED_PORT_INDEX(_phy, _led) (((_phy) * QCA8K_LED_PORT_COUNT) + (_led)) + +#define QCA8K_LED_PHY123_PATTERN_EN_SHIFT(_phy, _led) ((((_phy) - 1) * 6) + 8 + (2 * (_led))) +#define QCA8K_LED_PHY123_PATTERN_EN_MASK GENMASK(1, 0) + +#define QCA8K_LED_PHY0123_CONTROL_RULE_SHIFT 0 +#define QCA8K_LED_PHY4_CONTROL_RULE_SHIFT 16 + +#define QCA8K_LED_CTRL_REG(_i) (0x050 + (_i) * 4) +#define QCA8K_LED_CTRL0_REG 0x50 +#define QCA8K_LED_CTRL1_REG 0x54 +#define QCA8K_LED_CTRL2_REG 0x58 +#define QCA8K_LED_CTRL3_REG 0x5C +#define QCA8K_LED_CTRL_SHIFT(_i) (((_i) % 2) * 16) +#define QCA8K_LED_CTRL_MASK GENMASK(15, 0) +#define QCA8K_LED_RULE_MASK GENMASK(13, 0) +#define QCA8K_LED_BLINK_FREQ_MASK GENMASK(1, 0) +#define QCA8K_LED_BLINK_FREQ_SHITF 0 +#define QCA8K_LED_BLINK_2HZ 0 +#define QCA8K_LED_BLINK_4HZ 1 +#define QCA8K_LED_BLINK_8HZ 2 +#define QCA8K_LED_BLINK_AUTO 3 +#define QCA8K_LED_LINKUP_OVER_MASK BIT(2) +#define QCA8K_LED_TX_BLINK_MASK BIT(4) +#define QCA8K_LED_RX_BLINK_MASK BIT(5) +#define QCA8K_LED_COL_BLINK_MASK BIT(7) +#define QCA8K_LED_LINK_10M_EN_MASK BIT(8) +#define QCA8K_LED_LINK_100M_EN_MASK BIT(9) +#define QCA8K_LED_LINK_1000M_EN_MASK BIT(10) +#define QCA8K_LED_POWER_ON_LIGHT_MASK BIT(11) +#define QCA8K_LED_HALF_DUPLEX_MASK BIT(12) +#define QCA8K_LED_FULL_DUPLEX_MASK BIT(13) +#define QCA8K_LED_PATTERN_EN_MASK GENMASK(15, 14) +#define QCA8K_LED_PATTERN_EN_SHIFT 14 +#define QCA8K_LED_ALWAYS_OFF 0 +#define QCA8K_LED_ALWAYS_BLINK_4HZ 1 +#define QCA8K_LED_ALWAYS_ON 2 +#define QCA8K_LED_RULE_CONTROLLED 3 + #define QCA8K_GOL_MAC_ADDR0 0x60 #define QCA8K_GOL_MAC_ADDR1 0x64 #define QCA8K_MAX_FRAME_SIZE 0x78 @@ -382,6 +428,19 @@ struct qca8k_pcs { int port; }; +struct qca8k_led_pattern_en { + u32 reg; + u8 shift; +}; + +struct qca8k_led { + u8 port_num; + u8 led_num; + u16 old_rule; + struct qca8k_priv *priv; + struct led_classdev cdev; +}; + struct qca8k_priv { u8 switch_id; u8 switch_revision; @@ -406,6 +465,7 @@ struct qca8k_priv { struct qca8k_pcs pcs_port_0; struct qca8k_pcs pcs_port_6; const struct qca8k_match_data *info; + struct qca8k_led ports_led[QCA8K_LED_COUNT]; }; struct qca8k_mib_desc { @@ -421,6 +481,20 @@ struct qca8k_fdb { u8 mac[6]; }; +static inline u32 qca8k_port_to_phy(int port) +{ + /* From Andrew Lunn: + * Port 0 has no internal phy. + * Port 1 has an internal PHY at MDIO address 0. + * Port 2 has an internal PHY at MDIO address 1. + * ... + * Port 5 has an internal PHY at MDIO address 4. + * Port 6 has no internal PHY. + */ + + return port - 1; +} + /* Common setup function */ extern const struct qca8k_mib_desc ar8327_mib[]; extern const struct regmap_access_table qca8k_readable_table; diff --git a/drivers/net/dsa/qca/qca8k_leds.h b/drivers/net/dsa/qca/qca8k_leds.h new file mode 100644 index 000000000000..ab367f05b173 --- /dev/null +++ b/drivers/net/dsa/qca/qca8k_leds.h @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef __QCA8K_LEDS_H +#define __QCA8K_LEDS_H + +/* Leds Support function */ +#ifdef CONFIG_NET_DSA_QCA8K_LEDS_SUPPORT +int qca8k_setup_led_ctrl(struct qca8k_priv *priv); +#else +static inline int qca8k_setup_led_ctrl(struct qca8k_priv *priv) +{ + return 0; +} +#endif + +#endif /* __QCA8K_LEDS_H */ diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 6b9525def973..b8cc49820ced 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -18,6 +18,7 @@ menuconfig PHYLIB depends on NETDEVICES select MDIO_DEVICE select MDIO_DEVRES + depends on LEDS_CLASS || LEDS_CLASS=n help Ethernet controllers are usually attached to PHY devices. This option provides infrastructure for diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index 24853e9a889e..cd5d0ed9c5e5 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -144,11 +144,15 @@ /* WOL Event Interrupt Enable */ #define MII_88E1318S_PHY_CSIER_WOL_EIE BIT(7) -/* LED Timer Control Register */ -#define MII_88E1318S_PHY_LED_TCR 0x12 -#define MII_88E1318S_PHY_LED_TCR_FORCE_INT BIT(15) -#define MII_88E1318S_PHY_LED_TCR_INTn_ENABLE BIT(7) -#define MII_88E1318S_PHY_LED_TCR_INT_ACTIVE_LOW BIT(11) +#define MII_88E1318S_PHY_LED_FUNC 0x10 +#define MII_88E1318S_PHY_LED_FUNC_OFF (0x8) +#define MII_88E1318S_PHY_LED_FUNC_ON (0x9) +#define MII_88E1318S_PHY_LED_FUNC_HI_Z (0xa) +#define MII_88E1318S_PHY_LED_FUNC_BLINK (0xb) +#define MII_88E1318S_PHY_LED_TCR 0x12 +#define MII_88E1318S_PHY_LED_TCR_FORCE_INT BIT(15) +#define MII_88E1318S_PHY_LED_TCR_INTn_ENABLE BIT(7) +#define MII_88E1318S_PHY_LED_TCR_INT_ACTIVE_LOW BIT(11) /* Magic Packet MAC address registers */ #define MII_88E1318S_PHY_MAGIC_PACKET_WORD2 0x17 @@ -2832,6 +2836,63 @@ static int marvell_hwmon_probe(struct phy_device *phydev) } #endif +static int m88e1318_led_brightness_set(struct phy_device *phydev, + u8 index, enum led_brightness value) +{ + int reg; + + reg = phy_read_paged(phydev, MII_MARVELL_LED_PAGE, + MII_88E1318S_PHY_LED_FUNC); + if (reg < 0) + return reg; + + switch (index) { + case 0: + case 1: + case 2: + reg &= ~(0xf << (4 * index)); + if (value == LED_OFF) + reg |= MII_88E1318S_PHY_LED_FUNC_OFF << (4 * index); + else + reg |= MII_88E1318S_PHY_LED_FUNC_ON << (4 * index); + break; + default: + return -EINVAL; + } + + return phy_write_paged(phydev, MII_MARVELL_LED_PAGE, + MII_88E1318S_PHY_LED_FUNC, reg); +} + +static int m88e1318_led_blink_set(struct phy_device *phydev, u8 index, + unsigned long *delay_on, + unsigned long *delay_off) +{ + int reg; + + reg = phy_read_paged(phydev, MII_MARVELL_LED_PAGE, + MII_88E1318S_PHY_LED_FUNC); + if (reg < 0) + return reg; + + switch (index) { + case 0: + case 1: + case 2: + reg &= ~(0xf << (4 * index)); + reg |= MII_88E1318S_PHY_LED_FUNC_BLINK << (4 * index); + /* Reset default is 84ms */ + *delay_on = 84 / 2; + *delay_off = 84 / 2; + break; + default: + return -EINVAL; + } + + return phy_write_paged(phydev, MII_MARVELL_LED_PAGE, + MII_88E1318S_PHY_LED_FUNC, reg); |