diff options
52 files changed, 2530 insertions, 253 deletions
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml index c4b7243ddcf2..15ed64d35261 100644 --- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml @@ -34,6 +34,8 @@ properties: - allwinner,sun8i-v3-ccu - allwinner,sun8i-v3s-ccu - allwinner,sun9i-a80-ccu + - allwinner,sun20i-d1-ccu + - allwinner,sun20i-d1-r-ccu - allwinner,sun50i-a64-ccu - allwinner,sun50i-a64-r-ccu - allwinner,sun50i-a100-ccu @@ -79,6 +81,7 @@ if: enum: - allwinner,sun8i-a83t-r-ccu - allwinner,sun8i-h3-r-ccu + - allwinner,sun20i-d1-r-ccu - allwinner,sun50i-a64-r-ccu - allwinner,sun50i-a100-r-ccu - allwinner,sun50i-h6-r-ccu @@ -99,6 +102,7 @@ else: properties: compatible: enum: + - allwinner,sun20i-d1-ccu - allwinner,sun50i-a100-ccu - allwinner,sun50i-h6-ccu - allwinner,sun50i-h616-ccu diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index e42312121e51..6afe36bd2c0a 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -110,7 +110,7 @@ obj-$(CONFIG_PLAT_SPEAR) += spear/ obj-y += sprd/ obj-$(CONFIG_ARCH_STI) += st/ obj-$(CONFIG_ARCH_SUNXI) += sunxi/ -obj-$(CONFIG_SUNXI_CCU) += sunxi-ng/ +obj-y += sunxi-ng/ obj-$(CONFIG_ARCH_TEGRA) += tegra/ obj-y += ti/ obj-$(CONFIG_CLK_UNIPHIER) += uniphier/ diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig index e76e1676f0f0..68a94e5af8ed 100644 --- a/drivers/clk/sunxi-ng/Kconfig +++ b/drivers/clk/sunxi-ng/Kconfig @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0-only config SUNXI_CCU - bool "Clock support for Allwinner SoCs" + tristate "Clock support for Allwinner SoCs" depends on ARCH_SUNXI || COMPILE_TEST select RESET_CONTROLLER default ARCH_SUNXI @@ -8,42 +8,52 @@ config SUNXI_CCU if SUNXI_CCU config SUNIV_F1C100S_CCU - bool "Support for the Allwinner newer F1C100s CCU" + tristate "Support for the Allwinner newer F1C100s CCU" default MACH_SUNIV depends on MACH_SUNIV || COMPILE_TEST +config SUN20I_D1_CCU + tristate "Support for the Allwinner D1 CCU" + default RISCV && ARCH_SUNXI + depends on (RISCV && ARCH_SUNXI) || COMPILE_TEST + +config SUN20I_D1_R_CCU + tristate "Support for the Allwinner D1 PRCM CCU" + default RISCV && ARCH_SUNXI + depends on (RISCV && ARCH_SUNXI) || COMPILE_TEST + config SUN50I_A64_CCU - bool "Support for the Allwinner A64 CCU" + tristate "Support for the Allwinner A64 CCU" default ARM64 && ARCH_SUNXI depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST config SUN50I_A100_CCU - bool "Support for the Allwinner A100 CCU" + tristate "Support for the Allwinner A100 CCU" default ARM64 && ARCH_SUNXI depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST config SUN50I_A100_R_CCU - bool "Support for the Allwinner A100 PRCM CCU" + tristate "Support for the Allwinner A100 PRCM CCU" default ARM64 && ARCH_SUNXI depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST config SUN50I_H6_CCU - bool "Support for the Allwinner H6 CCU" + tristate "Support for the Allwinner H6 CCU" default ARM64 && ARCH_SUNXI depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST config SUN50I_H616_CCU - bool "Support for the Allwinner H616 CCU" + tristate "Support for the Allwinner H616 CCU" default ARM64 && ARCH_SUNXI depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST config SUN50I_H6_R_CCU - bool "Support for the Allwinner H6 and H616 PRCM CCU" + tristate "Support for the Allwinner H6 and H616 PRCM CCU" default ARM64 && ARCH_SUNXI depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST config SUN4I_A10_CCU - bool "Support for the Allwinner A10/A20 CCU" + tristate "Support for the Allwinner A10/A20 CCU" default MACH_SUN4I default MACH_SUN7I depends on MACH_SUN4I || MACH_SUN7I || COMPILE_TEST @@ -52,53 +62,54 @@ config SUN5I_CCU bool "Support for the Allwinner sun5i family CCM" default MACH_SUN5I depends on MACH_SUN5I || COMPILE_TEST + depends on SUNXI_CCU=y config SUN6I_A31_CCU - bool "Support for the Allwinner A31/A31s CCU" + tristate "Support for the Allwinner A31/A31s CCU" default MACH_SUN6I depends on MACH_SUN6I || COMPILE_TEST config SUN8I_A23_CCU - bool "Support for the Allwinner A23 CCU" + tristate "Support for the Allwinner A23 CCU" default MACH_SUN8I depends on MACH_SUN8I || COMPILE_TEST config SUN8I_A33_CCU - bool "Support for the Allwinner A33 CCU" + tristate "Support for the Allwinner A33 CCU" default MACH_SUN8I depends on MACH_SUN8I || COMPILE_TEST config SUN8I_A83T_CCU - bool "Support for the Allwinner A83T CCU" + tristate "Support for the Allwinner A83T CCU" default MACH_SUN8I depends on MACH_SUN8I || COMPILE_TEST config SUN8I_H3_CCU - bool "Support for the Allwinner H3 CCU" + tristate "Support for the Allwinner H3 CCU" default MACH_SUN8I || (ARM64 && ARCH_SUNXI) depends on MACH_SUN8I || (ARM64 && ARCH_SUNXI) || COMPILE_TEST config SUN8I_V3S_CCU - bool "Support for the Allwinner V3s CCU" + tristate "Support for the Allwinner V3s CCU" default MACH_SUN8I depends on MACH_SUN8I || COMPILE_TEST config SUN8I_DE2_CCU - bool "Support for the Allwinner SoCs DE2 CCU" + tristate "Support for the Allwinner SoCs DE2 CCU" default MACH_SUN8I || (ARM64 && ARCH_SUNXI) config SUN8I_R40_CCU - bool "Support for the Allwinner R40 CCU" + tristate "Support for the Allwinner R40 CCU" default MACH_SUN8I depends on MACH_SUN8I || COMPILE_TEST config SUN9I_A80_CCU - bool "Support for the Allwinner A80 CCU" + tristate "Support for the Allwinner A80 CCU" default MACH_SUN9I depends on MACH_SUN9I || COMPILE_TEST config SUN8I_R_CCU - bool "Support for Allwinner SoCs' PRCM CCUs" + tristate "Support for Allwinner SoCs' PRCM CCUs" default MACH_SUN8I || (ARCH_SUNXI && ARM64) endif diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile index 96c324306d97..ec931cb7aa14 100644 --- a/drivers/clk/sunxi-ng/Makefile +++ b/drivers/clk/sunxi-ng/Makefile @@ -1,44 +1,73 @@ # SPDX-License-Identifier: GPL-2.0 + +obj-$(CONFIG_SUNXI_CCU) += sunxi-ccu.o + # Common objects -obj-y += ccu_common.o -obj-y += ccu_mmc_timing.o -obj-y += ccu_reset.o +sunxi-ccu-y += ccu_common.o +sunxi-ccu-y += ccu_mmc_timing.o +sunxi-ccu-y += ccu_reset.o # Base clock types -obj-y += ccu_div.o -obj-y += ccu_frac.o -obj-y += ccu_gate.o -obj-y += ccu_mux.o -obj-y += ccu_mult.o -obj-y += ccu_phase.o -obj-y += ccu_sdm.o +sunxi-ccu-y += ccu_div.o +sunxi-ccu-y += ccu_frac.o +sunxi-ccu-y += ccu_gate.o +sunxi-ccu-y += ccu_mux.o +sunxi-ccu-y += ccu_mult.o +sunxi-ccu-y += ccu_phase.o +sunxi-ccu-y += ccu_sdm.o # Multi-factor clocks -obj-y += ccu_nk.o -obj-y += ccu_nkm.o -obj-y += ccu_nkmp.o -obj-y += ccu_nm.o -obj-y += ccu_mp.o +sunxi-ccu-y += ccu_nk.o +sunxi-ccu-y += ccu_nkm.o +sunxi-ccu-y += ccu_nkmp.o +sunxi-ccu-y += ccu_nm.o +sunxi-ccu-y += ccu_mp.o # SoC support -obj-$(CONFIG_SUNIV_F1C100S_CCU) += ccu-suniv-f1c100s.o -obj-$(CONFIG_SUN50I_A64_CCU) += ccu-sun50i-a64.o -obj-$(CONFIG_SUN50I_A100_CCU) += ccu-sun50i-a100.o -obj-$(CONFIG_SUN50I_A100_R_CCU) += ccu-sun50i-a100-r.o -obj-$(CONFIG_SUN50I_H6_CCU) += ccu-sun50i-h6.o -obj-$(CONFIG_SUN50I_H616_CCU) += ccu-sun50i-h616.o -obj-$(CONFIG_SUN50I_H6_R_CCU) += ccu-sun50i-h6-r.o -obj-$(CONFIG_SUN4I_A10_CCU) += ccu-sun4i-a10.o -obj-$(CONFIG_SUN5I_CCU) += ccu-sun5i.o -obj-$(CONFIG_SUN6I_A31_CCU) += ccu-sun6i-a31.o -obj-$(CONFIG_SUN8I_A23_CCU) += ccu-sun8i-a23.o -obj-$(CONFIG_SUN8I_A33_CCU) += ccu-sun8i-a33.o -obj-$(CONFIG_SUN8I_A83T_CCU) += ccu-sun8i-a83t.o -obj-$(CONFIG_SUN8I_H3_CCU) += ccu-sun8i-h3.o -obj-$(CONFIG_SUN8I_V3S_CCU) += ccu-sun8i-v3s.o -obj-$(CONFIG_SUN8I_DE2_CCU) += ccu-sun8i-de2.o -obj-$(CONFIG_SUN8I_R_CCU) += ccu-sun8i-r.o -obj-$(CONFIG_SUN8I_R40_CCU) += ccu-sun8i-r40.o -obj-$(CONFIG_SUN9I_A80_CCU) += ccu-sun9i-a80.o -obj-$(CONFIG_SUN9I_A80_CCU) += ccu-sun9i-a80-de.o -obj-$(CONFIG_SUN9I_A80_CCU) += ccu-sun9i-a80-usb.o +obj-$(CONFIG_SUNIV_F1C100S_CCU) += suniv-f1c100s-ccu.o +obj-$(CONFIG_SUN20I_D1_CCU) += sun20i-d1-ccu.o +obj-$(CONFIG_SUN20I_D1_R_CCU) += sun20i-d1-r-ccu.o +obj-$(CONFIG_SUN50I_A64_CCU) += sun50i-a64-ccu.o +obj-$(CONFIG_SUN50I_A100_CCU) += sun50i-a100-ccu.o +obj-$(CONFIG_SUN50I_A100_R_CCU) += sun50i-a100-r-ccu.o +obj-$(CONFIG_SUN50I_H6_CCU) += sun50i-h6-ccu.o +obj-$(CONFIG_SUN50I_H6_R_CCU) += sun50i-h6-r-ccu.o +obj-$(CONFIG_SUN50I_H616_CCU) += sun50i-h616-ccu.o +obj-$(CONFIG_SUN4I_A10_CCU) += sun4i-a10-ccu.o +obj-$(CONFIG_SUN5I_CCU) += sun5i-ccu.o +obj-$(CONFIG_SUN6I_A31_CCU) += sun6i-a31-ccu.o +obj-$(CONFIG_SUN8I_A23_CCU) += sun8i-a23-ccu.o +obj-$(CONFIG_SUN8I_A33_CCU) += sun8i-a33-ccu.o +obj-$(CONFIG_SUN8I_A83T_CCU) += sun8i-a83t-ccu.o +obj-$(CONFIG_SUN8I_H3_CCU) += sun8i-h3-ccu.o +obj-$(CONFIG_SUN8I_R40_CCU) += sun8i-r40-ccu.o +obj-$(CONFIG_SUN8I_V3S_CCU) += sun8i-v3s-ccu.o +obj-$(CONFIG_SUN8I_DE2_CCU) += sun8i-de2-ccu.o +obj-$(CONFIG_SUN8I_R_CCU) += sun8i-r-ccu.o +obj-$(CONFIG_SUN9I_A80_CCU) += sun9i-a80-ccu.o +obj-$(CONFIG_SUN9I_A80_CCU) += sun9i-a80-de-ccu.o +obj-$(CONFIG_SUN9I_A80_CCU) += sun9i-a80-usb-ccu.o + +suniv-f1c100s-ccu-y += ccu-suniv-f1c100s.o +sun20i-d1-ccu-y += ccu-sun20i-d1.o +sun20i-d1-r-ccu-y += ccu-sun20i-d1-r.o +sun50i-a64-ccu-y += ccu-sun50i-a64.o +sun50i-a100-ccu-y += ccu-sun50i-a100.o +sun50i-a100-r-ccu-y += ccu-sun50i-a100-r.o +sun50i-h6-ccu-y += ccu-sun50i-h6.o +sun50i-h6-r-ccu-y += ccu-sun50i-h6-r.o +sun50i-h616-ccu-y += ccu-sun50i-h616.o +sun4i-a10-ccu-y += ccu-sun4i-a10.o +sun5i-ccu-y += ccu-sun5i.o +sun6i-a31-ccu-y += ccu-sun6i-a31.o +sun8i-a23-ccu-y += ccu-sun8i-a23.o +sun8i-a33-ccu-y += ccu-sun8i-a33.o +sun8i-a83t-ccu-y += ccu-sun8i-a83t.o +sun8i-h3-ccu-y += ccu-sun8i-h3.o +sun8i-r40-ccu-y += ccu-sun8i-r40.o +sun8i-v3s-ccu-y += ccu-sun8i-v3s.o +sun8i-de2-ccu-y += ccu-sun8i-de2.o +sun8i-r-ccu-y += ccu-sun8i-r.o +sun9i-a80-ccu-y += ccu-sun9i-a80.o +sun9i-a80-de-ccu-y += ccu-sun9i-a80-de.o +sun9i-a80-usb-ccu-y += ccu-sun9i-a80-usb.o diff --git a/drivers/clk/sunxi-ng/ccu-sun20i-d1-r.c b/drivers/clk/sunxi-ng/ccu-sun20i-d1-r.c new file mode 100644 index 000000000000..9d3ffd3fb2c1 --- /dev/null +++ b/drivers/clk/sunxi-ng/ccu-sun20i-d1-r.c @@ -0,0 +1,140 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2020 huangzhenwei@allwinnertech.com + * Copyright (C) 2021 Samuel Holland <samuel@sholland.org> + */ + +#include <linux/clk-provider.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +#include "ccu_common.h" +#include "ccu_reset.h" + +#include "ccu_gate.h" +#include "ccu_mp.h" + +#include "ccu-sun20i-d1-r.h" + +static const struct clk_parent_data r_ahb_apb0_parents[] = { + { .fw_name = "hosc" }, + { .fw_name = "losc" }, + { .fw_name = "iosc" }, + { .fw_name = "pll-periph" }, +}; +static SUNXI_CCU_MP_DATA_WITH_MUX(r_ahb_clk, "r-ahb", + r_ahb_apb0_parents, 0x000, + 0, 5, /* M */ + 8, 2, /* P */ + 24, 3, /* mux */ + 0); +static const struct clk_hw *r_ahb_hw = &r_ahb_clk.common.hw; + +static SUNXI_CCU_MP_DATA_WITH_MUX(r_apb0_clk, "r-apb0", + r_ahb_apb0_parents, 0x00c, + 0, 5, /* M */ + 8, 2, /* P */ + 24, 3, /* mux */ + 0); +static const struct clk_hw *r_apb0_hw = &r_apb0_clk.common.hw; + +static SUNXI_CCU_GATE_HWS(bus_r_timer_clk, "bus-r-timer", &r_apb0_hw, + 0x11c, BIT(0), 0); +static SUNXI_CCU_GATE_HWS(bus_r_twd_clk, "bus-r-twd", &r_apb0_hw, + 0x12c, BIT(0), 0); +static SUNXI_CCU_GATE_HWS(bus_r_ppu_clk, "bus-r-ppu", &r_apb0_hw, + 0x1ac, BIT(0), 0); + +static const struct clk_parent_data r_ir_rx_parents[] = { + { .fw_name = "losc" }, + { .fw_name = "hosc" }, +}; +static SUNXI_CCU_MP_DATA_WITH_MUX_GATE(r_ir_rx_clk, "r-ir-rx", + r_ir_rx_parents, 0x1c0, + 0, 5, /* M */ + 8, 2, /* P */ + 24, 2, /* mux */ + BIT(31), /* gate */ + 0); + +static SUNXI_CCU_GATE_HWS(bus_r_ir_rx_clk, "bus-r-ir-rx", &r_apb0_hw, + 0x1cc, BIT(0), 0); +static SUNXI_CCU_GATE_HWS(bus_r_rtc_clk, "bus-r-rtc", &r_ahb_hw, + 0x20c, BIT(0), 0); +static SUNXI_CCU_GATE_HWS(bus_r_cpucfg_clk, "bus-r-cpucfg", &r_apb0_hw, + 0x22c, BIT(0), 0); + +static struct ccu_common *sun20i_d1_r_ccu_clks[] = { + &r_ahb_clk.common, + &r_apb0_clk.common, + &bus_r_timer_clk.common, + &bus_r_twd_clk.common, + &bus_r_ppu_clk.common, + &r_ir_rx_clk.common, + &bus_r_ir_rx_clk.common, + &bus_r_rtc_clk.common, + &bus_r_cpucfg_clk.common, +}; + +static struct clk_hw_onecell_data sun20i_d1_r_hw_clks = { + .num = CLK_NUMBER, + .hws = { + [CLK_R_AHB] = &r_ahb_clk.common.hw, + [CLK_R_APB0] = &r_apb0_clk.common.hw, + [CLK_BUS_R_TIMER] = &bus_r_timer_clk.common.hw, + [CLK_BUS_R_TWD] = &bus_r_twd_clk.common.hw, + [CLK_BUS_R_PPU] = &bus_r_ppu_clk.common.hw, + [CLK_R_IR_RX] = &r_ir_rx_clk.common.hw, + [CLK_BUS_R_IR_RX] = &bus_r_ir_rx_clk.common.hw, + [CLK_BUS_R_RTC] = &bus_r_rtc_clk.common.hw, + [CLK_BUS_R_CPUCFG] = &bus_r_cpucfg_clk.common.hw, + }, +}; + +static struct ccu_reset_map sun20i_d1_r_ccu_resets[] = { + [RST_BUS_R_TIMER] = { 0x11c, BIT(16) }, + [RST_BUS_R_TWD] = { 0x12c, BIT(16) }, + [RST_BUS_R_PPU] = { 0x1ac, BIT(16) }, + [RST_BUS_R_IR_RX] = { 0x1cc, BIT(16) }, + [RST_BUS_R_RTC] = { 0x20c, BIT(16) }, + [RST_BUS_R_CPUCFG] = { 0x22c, BIT(16) }, +}; + +static const struct sunxi_ccu_desc sun20i_d1_r_ccu_desc = { + .ccu_clks = sun20i_d1_r_ccu_clks, + .num_ccu_clks = ARRAY_SIZE(sun20i_d1_r_ccu_clks), + + .hw_clks = &sun20i_d1_r_hw_clks, + + .resets = sun20i_d1_r_ccu_resets, + .num_resets = ARRAY_SIZE(sun20i_d1_r_ccu_resets), +}; + +static int sun20i_d1_r_ccu_probe(struct platform_device *pdev) +{ + void __iomem *reg; + + reg = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(reg)) + return PTR_ERR(reg); + + return devm_sunxi_ccu_probe(&pdev->dev, reg, &sun20i_d1_r_ccu_desc); +} + +static const struct of_device_id sun20i_d1_r_ccu_ids[] = { + { .compatible = "allwinner,sun20i-d1-r-ccu" }, + { } +}; + +static struct platform_driver sun20i_d1_r_ccu_driver = { + .probe = sun20i_d1_r_ccu_probe, + .driver = { + .name = "sun20i-d1-r-ccu", + .suppress_bind_attrs = true, + .of_match_table = sun20i_d1_r_ccu_ids, + }, +}; +module_platform_driver(sun20i_d1_r_ccu_driver); + +MODULE_IMPORT_NS(SUNXI_CCU); +MODULE_LICENSE("GPL"); diff --git a/drivers/clk/sunxi-ng/ccu-sun20i-d1-r.h b/drivers/clk/sunxi-ng/ccu-sun20i-d1-r.h new file mode 100644 index 000000000000..afd4342209ee --- /dev/null +++ b/drivers/clk/sunxi-ng/ccu-sun20i-d1-r.h @@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2020 frank@allwinnertech.com + * Copyright (C) 2021 Samuel Holland <samuel@sholland.org> + */ + +#ifndef _CCU_SUN20I_D1_R_H +#define _CCU_SUN20I_D1_R_H + +#include <dt-bindings/clock/sun20i-d1-r-ccu.h> +#include <dt-bindings/reset/sun20i-d1-r-ccu.h> + +#define CLK_R_APB0 1 + +#define CLK_NUMBER (CLK_BUS_R_CPUCFG + 1) + +#endif /* _CCU_SUN20I_D1_R_H */ diff --git a/drivers/clk/sunxi-ng/ccu-sun20i-d1.c b/drivers/clk/sunxi-ng/ccu-sun20i-d1.c new file mode 100644 index 000000000000..51058ba4db4d --- /dev/null +++ b/drivers/clk/sunxi-ng/ccu-sun20i-d1.c @@ -0,0 +1,1390 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2020 huangzhenwei@allwinnertech.com + * Copyright (C) 2021 Samuel Holland <samuel@sholland.org> + */ + +#include <linux/clk-provider.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +#include "../clk.h" + +#include "ccu_common.h" +#include "ccu_reset.h" + +#include "ccu_div.h" +#include "ccu_gate.h" +#include "ccu_mp.h" +#include "ccu_mult.h" +#include "ccu_nk.h" +#include "ccu_nkm.h" +#include "ccu_nkmp.h" +#include "ccu_nm.h" + +#include "ccu-sun20i-d1.h" + +static const struct clk_parent_data osc24M[] = { + { .fw_name = "hosc" } +}; + +/* + * For the CPU PLL, the output divider is described as "only for testing" + * in the user manual. So it's not modelled and forced to 0. + */ +#define SUN20I_D1_PLL_CPUX_REG 0x000 +static struct ccu_mult pll_cpux_clk = { + .enable = BIT(27), + .lock = BIT(28), + .mult = _SUNXI_CCU_MULT_MIN(8, 8, 12), + .common = { + .reg = 0x000, + .hw.init = CLK_HW_INIT_PARENTS_DATA("pll-cpux", osc24M, + &ccu_mult_ops, + CLK_SET_RATE_UNGATE), + }, +}; + +/* Some PLLs are input * N / div1 / P. Model them as NKMP with no K */ +#define SUN20I_D1_PLL_DDR0_REG 0x010 +static struct ccu_nkmp pll_ddr0_clk = { + .enable = BIT(27), + .lock = BIT(28), + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12), + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */ + .p = _SUNXI_CCU_DIV(0, 1), /* output divider */ + .common = { + .reg = 0x010, + .hw.init = CLK_HW_INIT_PARENTS_DATA("pll-ddr0", osc24M, + &ccu_nkmp_ops, + CLK_SET_RATE_UNGATE), + }, +}; + +#define SUN20I_D1_PLL_PERIPH0_REG 0x020 +static struct ccu_nm pll_periph0_4x_clk = { + .enable = BIT(27), + .lock = BIT(28), + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12), + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */ + .common = { + .reg = 0x020, + .hw.init = CLK_HW_INIT_PARENTS_DATA("pll-periph0-4x", osc24M, + &ccu_nm_ops, + CLK_SET_RATE_UNGATE), + }, +}; + +static const struct clk_hw *pll_periph0_4x_hws[] = { + &pll_periph0_4x_clk.common.hw +}; +static SUNXI_CCU_M_HWS(pll_periph0_2x_clk, "pll-periph0-2x", + pll_periph0_4x_hws, 0x020, 16, 3, 0); +static SUNXI_CCU_M_HWS(pll_periph0_800M_clk, "pll-periph0-800M", + pll_periph0_4x_hws, 0x020, 20, 3, 0); + +static const struct clk_hw *pll_periph0_2x_hws[] = { + &pll_periph0_2x_clk.common.hw +}; +static CLK_FIXED_FACTOR_HWS(pll_periph0_clk, "pll-periph0", + pll_periph0_2x_hws, 2, 1, 0); + +static const struct clk_hw *pll_periph0_hws[] = { &pll_periph0_clk.hw }; +static CLK_FIXED_FACTOR_HWS(pll_periph0_div3_clk, "pll-periph0-div3", + pll_periph0_2x_hws, 6, 1, 0); + +/* + * For Video PLLs, the output divider is described as "only for testing" + * in the user manual. So it's not modelled and forced to 0. + */ +#define SUN20I_D1_PLL_VIDEO0_REG 0x040 +static struct ccu_nm pll_video0_4x_clk = { + .enable = BIT(27), + .lock = BIT(28), + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12), + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */ + .common = { + .reg = 0x040, + .hw.init = CLK_HW_INIT_PARENTS_DATA("pll-video0-4x", osc24M, + &ccu_nm_ops, + CLK_SET_RATE_UNGATE), + }, +}; + +static const struct clk_hw *pll_video0_4x_hws[] = { + &pll_video0_4x_clk.common.hw +}; +static CLK_FIXED_FACTOR_HWS(pll_video0_2x_clk, "pll-video0-2x", + pll_video0_4x_hws, 2, 1, CLK_SET_RATE_PARENT); +static CLK_FIXED_FACTOR_HWS(pll_video0_clk, "pll-video0", + pll_video0_4x_hws, 4, 1, CLK_SET_RATE_PARENT); + +#define SUN20I_D1_PLL_VIDEO1_REG 0x048 +static struct ccu_nm pll_video1_4x_clk = { + .enable = BIT(27), + .lock = BIT(28), + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12), + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */ + .common = { + .reg = 0x048, + .hw.init = CLK_HW_INIT_PARENTS_DATA("pll-video1-4x", osc24M, + &ccu_nm_ops, + CLK_SET_RATE_UNGATE), + }, +}; + +static const struct clk_hw *pll_video1_4x_hws[] = { + &pll_video1_4x_clk.common.hw +}; +static CLK_FIXED_FACTOR_HWS(pll_video1_2x_clk, "pll-video1-2x", + pll_video1_4x_hws, 2, 1, CLK_SET_RATE_PARENT); +static CLK_FIXED_FACTOR_HWS(pll_video1_clk, "pll-video1", + pll_video1_4x_hws, 4, 1, CLK_SET_RATE_PARENT); + +#define SUN20I_D1_PLL_VE_REG 0x058 +static struct ccu_nkmp pll_ve_clk = { + .enable = BIT(27), + .lock = BIT(28), + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12), + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */ + .p = _SUNXI_CCU_DIV(0, 1), /* output divider */ + .common = { + .reg = 0x058, + .hw.init = CLK_HW_INIT_PARENTS_DATA("pll-ve", osc24M, + &ccu_nkmp_ops, + CLK_SET_RATE_UNGATE), + }, +}; + +/* + * PLL_AUDIO0 has m0, m1 dividers in addition to the usual N, M factors. + * Since we only need one frequency from this PLL (22.5792 x 4 == 90.3168 MHz), + * ignore them for now. Enforce the default for them, which is m1 = 0, m0 = 0. + * The M factor must be an even number to produce a 50% duty cycle output. + */ +#define SUN20I_D1_PLL_AUDIO0_REG 0x078 +static struct ccu_sdm_setting pll_audio0_sdm_table[] = { + { .rate = 90316800, .pattern = 0xc001288d, .m = 6, .n = 22 }, +}; + +static struct ccu_nm pll_audio0_4x_clk = { + .enable = BIT(27), + .lock = BIT(28), + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12), + .m = _SUNXI_CCU_DIV(16, 6), + .sdm = _SUNXI_CCU_SDM(pll_audio0_sdm_table, BIT(24), + 0x178, BIT(31)), + .common = { + .reg = 0x078, + .features = CCU_FEATURE_SIGMA_DELTA_MOD, + .hw.init = CLK_HW_INIT_PARENTS_DATA("pll-audio0-4x", osc24M, + &ccu_nm_ops, + CLK_SET_RATE_UNGATE), + }, +}; + +static const struct clk_hw *pll_audio0_4x_hws[] = { + &pll_audio0_4x_clk.common.hw +}; +static CLK_FIXED_FACTOR_HWS(pll_audio0_2x_clk, "pll-audio0-2x", + pll_audio0_4x_hws, 2, 1, 0); +static CLK_FIXED_FACTOR_HWS(pll_audio0_clk, "pll-audio0", + pll_audio0_4x_hws, 4, 1, 0); + +/* + * PLL_AUDIO1 doesn't need Fractional-N. The output is usually 614.4 MHz for + * audio. The ADC or DAC should divide the PLL output further to 24.576 |