diff options
36 files changed, 1536 insertions, 232 deletions
diff --git a/Documentation/Makefile b/Documentation/Makefile index bc0548201755..1207d7907650 100644 --- a/Documentation/Makefile +++ b/Documentation/Makefile @@ -1,4 +1,4 @@ subdir-y := accounting auxdisplay blackfin connector \ filesystems filesystems ia64 laptops mic misc-devices \ - networking pcmcia prctl ptp spi timers vDSO video4linux \ + networking pcmcia prctl ptp timers vDSO video4linux \ watchdog diff --git a/Documentation/devicetree/bindings/spi/sh-msiof.txt b/Documentation/devicetree/bindings/spi/sh-msiof.txt index 705075da2f10..aa005c1d10d9 100644 --- a/Documentation/devicetree/bindings/spi/sh-msiof.txt +++ b/Documentation/devicetree/bindings/spi/sh-msiof.txt @@ -10,6 +10,7 @@ Required properties: "renesas,msiof-r8a7792" (R-Car V2H) "renesas,msiof-r8a7793" (R-Car M2-N) "renesas,msiof-r8a7794" (R-Car E2) + "renesas,msiof-sh73a0" (SH-Mobile AG5) - reg : A list of offsets and lengths of the register sets for the device. If only one register set is present, it is to be used diff --git a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt index ce363c923f44..e43f4cf4cf35 100644 --- a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt +++ b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt @@ -2,9 +2,10 @@ Binding for MTK SPI controller Required properties: - compatible: should be one of the following. - - mediatek,mt8173-spi: for mt8173 platforms - - mediatek,mt8135-spi: for mt8135 platforms + - mediatek,mt2701-spi: for mt2701 platforms - mediatek,mt6589-spi: for mt6589 platforms + - mediatek,mt8135-spi: for mt8135 platforms + - mediatek,mt8173-spi: for mt8173 platforms - #address-cells: should be 1. @@ -29,10 +30,10 @@ Required properties: muxes clock, and "spi-clk" for the clock gate. Optional properties: --cs-gpios: see spi-bus.txt, only required for MT8173. +-cs-gpios: see spi-bus.txt. - mediatek,pad-select: specify which pins group(ck/mi/mo/cs) spi - controller used. This is a array, the element value should be 0~3, + controller used. This is an array, the element value should be 0~3, only required for MT8173. 0: specify GPIO69,70,71,72 for spi pins. 1: specify GPIO102,103,104,105 for spi pins. diff --git a/Documentation/spi/00-INDEX b/Documentation/spi/00-INDEX index a128fa835512..4644bf0d9832 100644 --- a/Documentation/spi/00-INDEX +++ b/Documentation/spi/00-INDEX @@ -10,13 +10,9 @@ pxa2xx - PXA2xx SPI master controller build by spi_message fifo wq spidev - Intro to the userspace API for spi devices -spidev_fdx.c - - spidev example file spi-lm70llp - Connecting an LM70-LLP sensor to the kernel via the SPI subsys. spi-sc18is602 - NXP SC18IS602/603 I2C-bus to SPI bridge spi-summary - (Linux) SPI overview. If unsure about SPI or SPI in Linux, start here. -spidev_test.c - - SPI testing utility. diff --git a/Documentation/spi/Makefile b/Documentation/spi/Makefile deleted file mode 100644 index efa255813e9d..000000000000 --- a/Documentation/spi/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# List of programs to build -hostprogs-y := spidev_test spidev_fdx - -# Tell kbuild to always build the programs -always := $(hostprogs-y) - -HOSTCFLAGS_spidev_test.o += -I$(objtree)/usr/include -HOSTCFLAGS_spidev_fdx.o += -I$(objtree)/usr/include diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 74ef8891254e..42f6f9cd844c 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -1100,9 +1100,7 @@ struct platform_device s3c_device_wdt = { #ifdef CONFIG_S3C64XX_DEV_SPI0 static struct resource s3c64xx_spi0_resource[] = { [0] = DEFINE_RES_MEM(S3C_PA_SPI0, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_SPI0_TX), - [2] = DEFINE_RES_DMA(DMACH_SPI0_RX), - [3] = DEFINE_RES_IRQ(IRQ_SPI0), + [1] = DEFINE_RES_IRQ(IRQ_SPI0), }; struct platform_device s3c64xx_device_spi0 = { @@ -1130,6 +1128,8 @@ void __init s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, pd.num_cs = num_cs; pd.src_clk_nr = src_clk_nr; pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi0_cfg_gpio; + pd.dma_tx = (void *)DMACH_SPI0_TX; + pd.dma_rx = (void *)DMACH_SPI0_RX; #if defined(CONFIG_PL330_DMA) pd.filter = pl330_filter; #elif defined(CONFIG_S3C64XX_PL080) @@ -1145,9 +1145,7 @@ void __init s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, #ifdef CONFIG_S3C64XX_DEV_SPI1 static struct resource s3c64xx_spi1_resource[] = { [0] = DEFINE_RES_MEM(S3C_PA_SPI1, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_SPI1_TX), - [2] = DEFINE_RES_DMA(DMACH_SPI1_RX), - [3] = DEFINE_RES_IRQ(IRQ_SPI1), + [1] = DEFINE_RES_IRQ(IRQ_SPI1), }; struct platform_device s3c64xx_device_spi1 = { @@ -1175,12 +1173,15 @@ void __init s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, pd.num_cs = num_cs; pd.src_clk_nr = src_clk_nr; pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi1_cfg_gpio; + pd.dma_tx = (void *)DMACH_SPI1_TX; + pd.dma_rx = (void *)DMACH_SPI1_RX; #if defined(CONFIG_PL330_DMA) pd.filter = pl330_filter; #elif defined(CONFIG_S3C64XX_PL080) pd.filter = pl08x_filter_id; #endif + s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi1); } #endif /* CONFIG_S3C64XX_DEV_SPI1 */ @@ -1188,9 +1189,7 @@ void __init s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, #ifdef CONFIG_S3C64XX_DEV_SPI2 static struct resource s3c64xx_spi2_resource[] = { [0] = DEFINE_RES_MEM(S3C_PA_SPI2, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_SPI2_TX), - [2] = DEFINE_RES_DMA(DMACH_SPI2_RX), - [3] = DEFINE_RES_IRQ(IRQ_SPI2), + [1] = DEFINE_RES_IRQ(IRQ_SPI2), }; struct platform_device s3c64xx_device_spi2 = { @@ -1218,6 +1217,8 @@ void __init s3c64xx_spi2_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, pd.num_cs = num_cs; pd.src_clk_nr = src_clk_nr; pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi2_cfg_gpio; + pd.dma_tx = (void *)DMACH_SPI2_TX; + pd.dma_rx = (void *)DMACH_SPI2_RX; #if defined(CONFIG_PL330_DMA) pd.filter = pl330_filter; #elif defined(CONFIG_S3C64XX_PL080) diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 8b9c2a38d1cc..77064160dd76 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -585,7 +585,7 @@ config SPI_TEGRA20_SLINK config SPI_TOPCLIFF_PCH tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) SPI" - depends on PCI && (X86_32 || COMPILE_TEST) + depends on PCI && (X86_32 || MIPS || COMPILE_TEST) help SPI driver for the Topcliff PCH (Platform Controller Hub) SPI bus used in some x86 embedded processors. @@ -689,6 +689,15 @@ config SPI_SPIDEV Note that this application programming interface is EXPERIMENTAL and hence SUBJECT TO CHANGE WITHOUT NOTICE while it stabilizes. +config SPI_LOOPBACK_TEST + tristate "spi loopback test framework support" + depends on m + help + This enables the SPI loopback testing framework driver + + primarily used for development of spi_master drivers + and to detect regressions + config SPI_TLE62X0 tristate "Infineon TLE62X0 (for power switching)" depends on SYSFS diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 31fb7fb2a0b6..8991ffce6e12 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -8,6 +8,7 @@ ccflags-$(CONFIG_SPI_DEBUG) := -DDEBUG # config declarations into driver model code obj-$(CONFIG_SPI_MASTER) += spi.o obj-$(CONFIG_SPI_SPIDEV) += spidev.o +obj-$(CONFIG_SPI_LOOPBACK_TEST) += spi-loopback-test.o # SPI master controller drivers (bus) obj-$(CONFIG_SPI_ALTERA) += spi-altera.o diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c index bf9a610e5b89..fee747030ee6 100644 --- a/drivers/spi/spi-bcm63xx.c +++ b/drivers/spi/spi-bcm63xx.c @@ -207,6 +207,9 @@ static void bcm63xx_spi_setup_transfer(struct spi_device *spi, u8 clk_cfg, reg; int i; + /* Default to lowest clock configuration */ + clk_cfg = SPI_CLK_0_391MHZ; + /* Find the closest clock configuration */ for (i = 0; i < SPI_CLK_MASK; i++) { if (t->speed_hz >= bcm63xx_spi_freq_table[i][0]) { @@ -215,10 +218,6 @@ static void bcm63xx_spi_setup_transfer(struct spi_device *spi, } } - /* No matching configuration found, default to lowest */ - if (i == SPI_CLK_MASK) - clk_cfg = SPI_CLK_0_391MHZ; - /* clear existing clock configuration bits of the register */ reg = bcm_spi_readb(bs, SPI_CLK_CFG); reg &= ~SPI_CLK_MASK; diff --git a/drivers/spi/spi-butterfly.c b/drivers/spi/spi-butterfly.c index 9a95862986c8..22a31e4a1a11 100644 --- a/drivers/spi/spi-butterfly.c +++ b/drivers/spi/spi-butterfly.c @@ -27,7 +27,6 @@ #include <linux/mtd/partitions.h> - /* * This uses SPI to talk with an "AVR Butterfly", which is a $US20 card * with a battery powered AVR microcontroller and lots of goodies. You @@ -37,7 +36,6 @@ * and use this custom parallel port cable. */ - /* DATA output bits (pins 2..9 == D0..D7) */ #define butterfly_nreset (1 << 1) /* pin 3 */ @@ -52,14 +50,11 @@ /* CONTROL output bits */ #define spi_cs_bit PARPORT_CONTROL_SELECT /* pin 17 */ - - static inline struct butterfly *spidev_to_pp(struct spi_device *spi) { return spi->controller_data; } - struct butterfly { /* REVISIT ... for now, this must be first */ struct spi_bitbang bitbang; @@ -140,7 +135,6 @@ static void butterfly_chipselect(struct spi_device *spi, int value) parport_frob_control(pp->port, spi_cs_bit, value ? spi_cs_bit : 0); } - /* we only needed to implement one mode here, and choose SPI_MODE_0 */ #define spidelay(X) do { } while (0) @@ -149,9 +143,8 @@ static void butterfly_chipselect(struct spi_device *spi, int value) #include "spi-bitbang-txrx.h" static u32 -butterfly_txrx_word_mode0(struct spi_device *spi, - unsigned nsecs, - u32 word, u8 bits) +butterfly_txrx_word_mode0(struct spi_device *spi, unsigned nsecs, u32 word, + u8 bits) { return bitbang_txrx_be_cpha0(spi, nsecs, 0, 0, word, bits); } @@ -186,7 +179,6 @@ static struct flash_platform_data flash = { .nr_parts = ARRAY_SIZE(partitions), }; - /* REVISIT remove this ugly global and its "only one" limitation */ static struct butterfly *butterfly; @@ -197,6 +189,7 @@ static void butterfly_attach(struct parport *p) struct butterfly *pp; struct spi_master *master; struct device *dev = p->physport->dev; + struct pardev_cb butterfly_cb; if (butterfly || !dev) return; @@ -229,9 +222,9 @@ static void butterfly_attach(struct parport *p) * parport hookup */ pp->port = p; - pd = parport_register_device(p, "spi_butterfly", - NULL, NULL, NULL, - 0 /* FLAGS */, pp); + memset(&butterfly_cb, 0, sizeof(butterfly_cb)); + butterfly_cb.private = pp; + pd = parport_register_dev_model(p, "spi_butterfly", &butterfly_cb, 0); if (!pd) { status = -ENOMEM; goto clean0; @@ -262,7 +255,6 @@ static void butterfly_attach(struct parport *p) parport_write_data(pp->port, pp->lastbyte); msleep(100); - /* * Start SPI ... for now, hide that we're two physical busses. */ @@ -283,7 +275,7 @@ static void butterfly_attach(struct parport *p) pp->dataflash = spi_new_device(pp->bitbang.master, &pp->info[0]); if (pp->dataflash) pr_debug("%s: dataflash at %s\n", p->name, - dev_name(&pp->dataflash->dev)); + dev_name(&pp->dataflash->dev)); pr_info("%s: AVR Butterfly\n", p->name); butterfly = pp; @@ -297,7 +289,7 @@ clean2: clean1: parport_unregister_device(pd); clean0: - (void) spi_master_put(pp->bitbang.master); + spi_master_put(pp->bitbang.master); done: pr_debug("%s: butterfly probe, fail %d\n", p->name, status); } @@ -325,16 +317,16 @@ static void butterfly_detach(struct parport *p) parport_release(pp->pd); parport_unregister_device(pp->pd); - (void) spi_master_put(pp->bitbang.master); + spi_master_put(pp->bitbang.master); } static struct parport_driver butterfly_driver = { .name = "spi_butterfly", - .attach = butterfly_attach, + .match_port = butterfly_attach, .detach = butterfly_detach, + .devmodel = true, }; - static int __init butterfly_init(void) { return parport_register_driver(&butterfly_driver); diff --git a/drivers/spi/spi-cadence.c b/drivers/spi/spi-cadence.c index 5a6749881ff9..121a4135b540 100644 --- a/drivers/spi/spi-cadence.c +++ b/drivers/spi/spi-cadence.c @@ -617,8 +617,7 @@ static int cdns_spi_remove(struct platform_device *pdev) */ static int __maybe_unused cdns_spi_suspend(struct device *dev) { - struct platform_device *pdev = container_of(dev, - struct platform_device, dev); + struct platform_device *pdev = to_platform_device(dev); struct spi_master *master = platform_get_drvdata(pdev); struct cdns_spi *xspi = spi_master_get_devdata(master); @@ -641,8 +640,7 @@ static int __maybe_unused cdns_spi_suspend(struct device *dev) */ static int __maybe_unused cdns_spi_resume(struct device *dev) { - struct platform_device *pdev = container_of(dev, - struct platform_device, dev); + struct platform_device *pdev = to_platform_device(dev); struct spi_master *master = platform_get_drvdata(pdev); struct cdns_spi *xspi = spi_master_get_devdata(master); int ret = 0; diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c index 7d3af3eacf57..fddb7a3be322 100644 --- a/drivers/spi/spi-davinci.c +++ b/drivers/spi/spi-davinci.c @@ -477,33 +477,33 @@ static int davinci_spi_check_error(struct davinci_spi *dspi, int int_status) struct device *sdev = dspi->bitbang.master->dev.parent; if (int_status & SPIFLG_TIMEOUT_MASK) { - dev_dbg(sdev, "SPI Time-out Error\n"); + dev_err(sdev, "SPI Time-out Error\n"); return -ETIMEDOUT; } if (int_status & SPIFLG_DESYNC_MASK) { - dev_dbg(sdev, "SPI Desynchronization Error\n"); + dev_err(sdev, "SPI Desynchronization Error\n"); return -EIO; } if (int_status & SPIFLG_BITERR_MASK) { - dev_dbg(sdev, "SPI Bit error\n"); + dev_err(sdev, "SPI Bit error\n"); return -EIO; } if (dspi->version == SPI_VERSION_2) { if (int_status & SPIFLG_DLEN_ERR_MASK) { - dev_dbg(sdev, "SPI Data Length Error\n"); + dev_err(sdev, "SPI Data Length Error\n"); return -EIO; } if (int_status & SPIFLG_PARERR_MASK) { - dev_dbg(sdev, "SPI Parity Error\n"); + dev_err(sdev, "SPI Parity Error\n"); return -EIO; } if (int_status & SPIFLG_OVRRUN_MASK) { - dev_dbg(sdev, "SPI Data Overrun error\n"); + dev_err(sdev, "SPI Data Overrun error\n"); return -EIO; } if (int_status & SPIFLG_BUF_INIT_ACTIVE_MASK) { - dev_dbg(sdev, "SPI Buffer Init Active\n"); + dev_err(sdev, "SPI Buffer Init Active\n"); return -EBUSY; } } @@ -703,7 +703,8 @@ static int davinci_spi_bufs(struct spi_device *spi, struct spi_transfer *t) /* Wait for the transfer to complete */ if (spicfg->io_type != SPI_IO_TYPE_POLL) { - wait_for_completion_interruptible(&(dspi->done)); + if (wait_for_completion_timeout(&dspi->done, HZ) == 0) + errors = SPIFLG_TIMEOUT_MASK; } else { while (dspi->rcount > 0 || dspi->wcount > 0) { errors = davinci_spi_process_events(dspi); diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c index bb1052e748f2..9185f6c08459 100644 --- a/drivers/spi/spi-dw-mid.c +++ b/drivers/spi/spi-dw-mid.c @@ -283,7 +283,7 @@ static void mid_spi_dma_stop(struct dw_spi *dws) } } -static struct dw_spi_dma_ops mid_dma_ops = { +static const struct dw_spi_dma_ops mid_dma_ops = { .dma_init = mid_spi_dma_init, .dma_exit = mid_spi_dma_exit, .dma_setup = mid_spi_dma_setup, diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c index 882cd6618cd5..c09bb745693a 100644 --- a/drivers/spi/spi-dw.c +++ b/drivers/spi/spi-dw.c @@ -425,7 +425,7 @@ static int dw_spi_setup(struct spi_device *spi) chip->type = chip_info->type; } - chip->tmode = 0; /* Tx & Rx */ + chip->tmode = SPI_TMOD_TR; if (gpio_is_valid(spi->cs_gpio)) { ret = gpio_direction_output(spi->cs_gpio, diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h index 35589a270468..61bc3cbab38d 100644 --- a/drivers/spi/spi-dw.h +++ b/drivers/spi/spi-dw.h @@ -130,7 +130,7 @@ struct dw_spi { struct dma_chan *rxchan; unsigned long dma_chan_busy; dma_addr_t dma_addr; /* phy address of the Data register */ - struct dw_spi_dma_ops *dma_ops; + const struct dw_spi_dma_ops *dma_ops; void *dma_tx; void *dma_rx; diff --git a/drivers/spi/spi-fsl-espi.c b/drivers/spi/spi-fsl-espi.c index c27124a5ec8e..7fd6a4c009d2 100644 --- a/drivers/spi/spi-fsl-espi.c +++ b/drivers/spi/spi-fsl-espi.c @@ -643,6 +643,11 @@ static int fsl_espi_runtime_resume(struct device *dev) } #endif +static size_t fsl_espi_max_transfer_size(struct spi_device *spi) +{ + return SPCOM_TRANLEN_MAX; +} + static struct spi_master * fsl_espi_probe(struct device *dev, struct resource *mem, unsigned int irq) { @@ -670,6 +675,7 @@ static struct spi_master * fsl_espi_probe(struct device *dev, master->cleanup = fsl_espi_cleanup; master->transfer_one_message = fsl_espi_do_one_msg; master->auto_runtime_pm = true; + master->max_transfer_size = fsl_espi_max_transfer_size; mpc8xxx_spi = spi_master_get_devdata(master); diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index 0e5723ab47f0..d98c33cb64f9 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -104,9 +104,7 @@ struct spi_imx_data { unsigned int dma_is_inited; unsigned int dma_finished; bool usedma; - u32 rx_wml; - u32 tx_wml; - u32 rxt_wml; + u32 wml; struct completion dma_rx_completion; struct completion dma_tx_completion; @@ -124,9 +122,14 @@ static inline int is_imx35_cspi(struct spi_imx_data *d) return d->devtype_data->devtype == IMX35_CSPI; } +static inline int is_imx51_ecspi(struct spi_imx_data *d) +{ + return d->devtype_data->devtype == IMX51_ECSPI; +} + static inline unsigned spi_imx_get_fifosize(struct spi_imx_data *d) { - return (d->devtype_data->devtype == IMX51_ECSPI) ? 64 : 8; + return is_imx51_ecspi(d) ? 64 : 8; } #define MXC_SPI_BUF_RX(type) \ @@ -201,9 +204,8 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi, { struct spi_imx_data *spi_imx = spi_master_get_devdata(master); - if (spi_imx->dma_is_inited - && transfer->len > spi_imx->rx_wml * sizeof(u32) - && transfer->len > spi_imx->tx_wml * sizeof(u32)) + if (spi_imx->dma_is_inited && + transfer->len > spi_imx->wml * sizeof(u32)) return true; return false; } @@ -244,6 +246,9 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi, #define MX51_ECSPI_STAT 0x18 #define MX51_ECSPI_STAT_RR (1 << 3) +#define MX51_ECSPI_TESTREG 0x20 +#define MX51_ECSPI_TESTREG_LBC BIT(31) + /* MX51 eCSPI */ static unsigned int mx51_ecspi_clkdiv(unsigned int fin, unsigned int fspi, unsigned int *fres) @@ -313,7 +318,7 @@ static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx, { u32 ctrl = MX51_ECSPI_CTRL_ENABLE, cfg = 0, dma = 0; u32 tx_wml_cfg, rx_wml_cfg, rxt_wml_cfg; - u32 clk = config->speed_hz, delay; + u32 clk = config->speed_hz, delay, reg; /* * The hardware seems to have a race condition when changing modes. The @@ -351,7 +356,16 @@ static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx, else cfg &= ~MX51_ECSPI_CONFIG_SSBPOL(config->cs); + /* CTRL register always go first to bring out controller from reset */ writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL); + + reg = readl(spi_imx->base + MX51_ECSPI_TESTREG); + if (config->mode & SPI_LOOP) + reg |= MX51_ECSPI_TESTREG_LBC; + else + reg &= ~MX51_ECSPI_TESTREG_LBC; + writel(reg, spi_imx->base + MX51_ECSPI_TESTREG); + writel(cfg, spi_imx->base + MX51_ECSPI_CONFIG); /* @@ -378,10 +392,9 @@ static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx, if (spi_imx->dma_is_inited) { dma = readl(spi_imx->base + MX51_ECSPI_DMA); - spi_imx->rxt_wml = spi_imx_get_fifosize(spi_imx) / 2; - rx_wml_cfg = spi_imx->rx_wml << MX51_ECSPI_DMA_RX_WML_OFFSET; - tx_wml_cfg = spi_imx->tx_wml << MX51_ECSPI_DMA_TX_WML_OFFSET; - rxt_wml_cfg = spi_imx->rxt_wml << MX51_ECSPI_DMA_RXT_WML_OFFSET; + rx_wml_cfg = spi_imx->wml << MX51_ECSPI_DMA_RX_WML_OFFSET; + tx_wml_cfg = spi_imx->wml << MX51_ECSPI_DMA_TX_WML_OFFSET; + rxt_wml_cfg = spi_imx->wml << MX51_ECSPI_DMA_RXT_WML_OFFSET; dma = (dma & ~MX51_ECSPI_DMA_TX_WML_MASK & ~MX51_ECSPI_DMA_RX_WML_MASK & ~MX51_ECSPI_DMA_RXT_WML_MASK) @@ -832,18 +845,21 @@ static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx, if (of_machine_is_compatible("fsl,imx6dl")) return 0; + spi_imx->wml = spi_imx_get_fifosize(spi_imx) / 2; + /* Prepare for TX DMA: */ - master->dma_tx = dma_request_slave_channel(dev, "tx"); - if (!master->dma_tx) { - dev_err(dev, "cannot get the TX DMA channel!\n"); - ret = -EINVAL; + master->dma_tx = dma_request_slave_channel_reason(dev, "tx"); + if (IS_ERR(master->dma_tx)) { + ret = PTR_ERR(master->dma_tx); + dev_dbg(dev, "can't get the TX DMA channel, error %d!\n", ret); + master->dma_tx = NULL; goto err; } slave_config.direction = DMA_MEM_TO_DEV; slave_config.dst_addr = res->start + MXC_CSPITXDATA; slave_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; - slave_config.dst_maxburst = spi_imx_get_fifosize(spi_imx) / 2; + slave_config.dst_maxburst = spi_imx->wml; ret = dmaengine_slave_config(master->dma_tx, &slave_config); if (ret) { dev_err(dev, "error in TX dma configuration.\n"); @@ -851,17 +867,18 @@ static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx, } /* Prepare for RX : */ - master->dma_rx = dma_request_slave_channel(dev, "rx"); - if (!master->dma_rx) { - dev_dbg(dev, "cannot get the DMA channel.\n"); - ret = -EINVAL; + master->dma_rx = dma_request_slave_channel_reason(dev, "rx"); + if (IS_ERR(master->dma_rx)) { + ret = PTR_ERR(master->dma_rx); + dev_dbg(dev, "can't get the RX DMA channel, error %d\n", ret); + master->dma_rx = NULL; goto err; } slave_config.direction = DMA_DEV_TO_MEM; slave_config.src_addr = res->start + MXC_CSPIRXDATA; slave_config.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; - slave_config.src_maxburst = spi_imx_get_fifosize(spi_imx) / 2; + slave_config.src_maxburst = spi_imx->wml; ret = dmaengine_slave_config(master->dma_rx, &slave_config); if (ret) { dev_err(dev, "error in RX dma configuration.\n"); @@ -874,8 +891,6 @@ static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx, master->max_dma_len = MAX_SDMA_BD_BYTES; spi_imx->bitbang.master->flags = SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX; - spi_imx->tx_wml = spi_imx_get_fifosize(spi_imx) / 2; - spi_imx->rx_wml = spi_imx_get_fifosize(spi_imx) / 2; spi_imx->dma_is_inited = 1; return 0; @@ -942,14 +957,22 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx, dma = readl(spi_imx->base + MX51_ECSPI_DMA); dma = dma & (~MX51_ECSPI_DMA_RXT_WML_MASK); /* Change RX_DMA_LENGTH trigger dma fetch tail data */ - left = transfer->len % spi_imx->rxt_wml; + left = transfer->len % spi_imx->wml; if (left) writel(dma | (left << MX51_ECSPI_DMA_RXT_WML_OFFSET), spi_imx->base + MX51_ECSPI_DMA); + /* + * Set these order to avoid potential RX overflow. The overflow may + * happen if we enable SPI HW before starting RX DMA due to rescheduling + * for another task and/or interrupt. + * So RX DMA enabled first to make sure data would be read out from FIFO + * ASAP. TX DMA enabled next to start filling TX FIFO with new data. + * And finaly SPI HW enabled to start actual data transfer. + */ + dma_async_issue_pending(master->dma_rx); + dma_async_issue_pending(master->dma_tx); spi_imx->devtype_data->trigger(spi_imx); - dma_async_issue_pending(master->dma_tx); - dma_async_issue_pending(master->dma_rx); /* Wait SDMA to finish the data transfer.*/ timeout = wait_for_completion_timeout(&spi_imx->dma_tx_completion, IMX_DMA_TIMEOUT); @@ -958,6 +981,7 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx, dev_driver_string(&master->dev), dev_name(&master->dev)); dmaengine_terminate_all(master->dma_tx); + dmaengine_terminate_all(master->dma_rx); } else { timeout = wait_for_completion_timeout( &spi_imx->dma_rx_completion, IMX_DMA_TIMEOUT); @@ -968,8 +992,9 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx, spi_imx->devtype_data->reset(spi_imx); dmaengine_terminate_all(master->dma_rx); } + dma &= ~MX51_ECSPI_DMA_RXT_WML_MASK; writel(dma | - spi_imx->rxt_wml << MX51_ECSPI_DMA_RXT_WML_OFFSET, + spi_imx->wml << MX51_ECSPI_DMA_RXT_WML_OFFSET, spi_imx->base + MX51_ECSPI_DMA); } @@ -1117,6 +1142,9 @@ static int spi_imx_probe(struct platform_device *pdev) spi_imx = spi_master_get_devdata(master); spi_imx->bitbang.master = master; + spi_imx->devtype_data = of_id ? of_id->data : + (struct spi_imx_devtype_data *)pdev->id_entry->driver_data; + for (i = 0; i < master->num_chipselect; i++) { int cs_gpio = of_get_named_gpio(np, "cs-gpios", i); if (!gpio_is_valid(cs_gpio) && mxc_platform_info) @@ -1142,12 +1170,11 @@ static int spi_imx_probe(struct platform_device *pdev) spi_imx->bitbang.master->prepare_message = spi_imx_prepare_message; spi_imx->bitbang.master->unprepare_message = spi_imx_unprepare_message; spi_imx->bitbang.master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; + if (is_imx51_ecspi(spi_imx)) + spi_imx->bitbang.master->mode_bits |= SPI_LOOP; init_completion(&spi_imx->xfer_done); - spi_imx->devtype_data = of_id ? of_id->data : - (struct spi_imx_devtype_data *) pdev->id_entry->driver_data; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); spi_imx->base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(spi_imx->base)) { @@ -1193,9 +1220,15 @@ static int spi_imx_probe(struct platform_device *pdev) * Only validated on i.mx6 now, can remove the constrain if validated on * other chips. */ - if (spi_imx->devtype_data == &imx51_ecspi_devtype_data - && sp |