diff options
108 files changed, 3239 insertions, 905 deletions
diff --git a/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt b/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt index 284e2b14cfbe..26649b4c4dd8 100644 --- a/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt +++ b/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt @@ -74,6 +74,12 @@ Required properties for DSI: The 3 clocks output from the DSI analog PHY: dsi[01]_byte, dsi[01]_ddr2, and dsi[01]_ddr +Required properties for the TXP (writeback) block: +- compatible: Should be "brcm,bcm2835-txp" +- reg: Physical base address and length of the TXP block's registers +- interrupts: The interrupt number + See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt + [1] Documentation/devicetree/bindings/media/video-interfaces.txt Example: diff --git a/Documentation/devicetree/bindings/display/panel/boe,hv070wsa-100.txt b/Documentation/devicetree/bindings/display/panel/boe,hv070wsa-100.txt new file mode 100644 index 000000000000..55183d360032 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/boe,hv070wsa-100.txt @@ -0,0 +1,28 @@ +BOE HV070WSA-100 7.01" WSVGA TFT LCD panel + +Required properties: +- compatible: should be "boe,hv070wsa-100" +- power-supply: regulator to provide the VCC supply voltage (3.3 volts) +- enable-gpios: GPIO pin to enable and disable panel (active high) + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. + +The device node can contain one 'port' child node with one child +'endpoint' node, according to the bindings defined in [1]. This +node should describe panel's video bus. + +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt + +Example: + + panel: panel { + compatible = "boe,hv070wsa-100"; + power-supply = <&vcc_3v3_reg>; + enable-gpios = <&gpd1 3 GPIO_ACTIVE_HIGH>; + port { + panel_ep: endpoint { + remote-endpoint = <&bridge_out_ep>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/panel/dataimage,scf0700c48ggu18.txt b/Documentation/devicetree/bindings/display/panel/dataimage,scf0700c48ggu18.txt new file mode 100644 index 000000000000..897085ee3cd4 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/dataimage,scf0700c48ggu18.txt @@ -0,0 +1,8 @@ +DataImage, Inc. 7" WVGA (800x480) TFT LCD panel with 24-bit parallel interface. + +Required properties: +- compatible: should be "dataimage,scf0700c48ggu18" +- power-supply: as specified in the base binding + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/dlc,dlc0700yzg-1.txt b/Documentation/devicetree/bindings/display/panel/dlc,dlc0700yzg-1.txt new file mode 100644 index 000000000000..bf06bb025b08 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/dlc,dlc0700yzg-1.txt @@ -0,0 +1,13 @@ +DLC Display Co. DLC0700YZG-1 7.0" WSVGA TFT LCD panel + +Required properties: +- compatible: should be "dlc,dlc0700yzg-1" +- power-supply: See simple-panel.txt + +Optional properties: +- reset-gpios: See panel-common.txt +- enable-gpios: See simple-panel.txt +- backlight: See simple-panel.txt + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/edt,et-series.txt b/Documentation/devicetree/bindings/display/panel/edt,et-series.txt new file mode 100644 index 000000000000..f56b99ebd9be --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/edt,et-series.txt @@ -0,0 +1,39 @@ +Emerging Display Technology Corp. Displays +========================================== + + +Display bindings for EDT Display Technology Corp. Displays which are +compatible with the simple-panel binding, which is specified in +simple-panel.txt + + +5,7" WVGA TFT Panels +-------------------- + ++-----------------+---------------------+-------------------------------------+ +| Identifier | compatbile | description | ++=================+=====================+=====================================+ +| ET057090DHU | edt,et057090dhu | 5.7" VGA TFT LCD panel | ++-----------------+---------------------+-------------------------------------+ + + +7,0" WVGA TFT Panels +-------------------- + ++-----------------+---------------------+-------------------------------------+ +| Identifier | compatbile | description | ++=================+=====================+=====================================+ +| ETM0700G0DH6 | edt,etm070080dh6 | WVGA TFT Display with capacitive | +| | | Touchscreen | ++-----------------+---------------------+-------------------------------------+ +| ETM0700G0BDH6 | edt,etm070080bdh6 | Same as ETM0700G0DH6 but with | +| | | inverted pixel clock. | ++-----------------+---------------------+-------------------------------------+ +| ETM0700G0EDH6 | edt,etm070080edh6 | Same display as the ETM0700G0BDH6, | +| | | but with changed Hardware for the | +| | | backlight and the touch interface | ++-----------------+---------------------+-------------------------------------+ +| ET070080DH6 | edt,etm070080dh6 | Same timings as the ETM0700G0DH6, | +| | | but with resistive touch. | ++-----------------+---------------------+-------------------------------------+ + diff --git a/Documentation/devicetree/bindings/display/panel/edt,et070080dh6.txt b/Documentation/devicetree/bindings/display/panel/edt,et070080dh6.txt deleted file mode 100644 index 20cb38e836e4..000000000000 --- a/Documentation/devicetree/bindings/display/panel/edt,et070080dh6.txt +++ /dev/null @@ -1,10 +0,0 @@ -Emerging Display Technology Corp. ET070080DH6 7.0" WVGA TFT LCD panel - -Required properties: -- compatible: should be "edt,et070080dh6" - -This panel is the same as ETM0700G0DH6 except for the touchscreen. -ET070080DH6 is the model with resistive touch. - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/edt,etm0700g0dh6.txt b/Documentation/devicetree/bindings/display/panel/edt,etm0700g0dh6.txt deleted file mode 100644 index ee4b18053e40..000000000000 --- a/Documentation/devicetree/bindings/display/panel/edt,etm0700g0dh6.txt +++ /dev/null @@ -1,10 +0,0 @@ -Emerging Display Technology Corp. ETM0700G0DH6 7.0" WVGA TFT LCD panel - -Required properties: -- compatible: should be "edt,etm0700g0dh6" - -This panel is the same as ET070080DH6 except for the touchscreen. -ETM0700G0DH6 is the model with capacitive multitouch. - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/innolux,g070y2-l01.txt b/Documentation/devicetree/bindings/display/panel/innolux,g070y2-l01.txt new file mode 100644 index 000000000000..7c234cf68e11 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/innolux,g070y2-l01.txt @@ -0,0 +1,12 @@ +Innolux G070Y2-L01 7" WVGA (800x480) TFT LCD panel + +Required properties: +- compatible: should be "innolux,g070y2-l01" +- power-supply: as specified in the base binding + +Optional properties: +- backlight: as specified in the base binding +- enable-gpios: as specified in the base binding + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.txt b/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.txt new file mode 100644 index 000000000000..595d9dfeffd3 --- |