diff options
64 files changed, 6462 insertions, 1913 deletions
diff --git a/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt b/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt index b6e8bfd024f4..e9f01a963a0a 100644 --- a/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt +++ b/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt @@ -9,13 +9,14 @@ Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt Required properties: + - compatible: "ti,omap2-onenand" - reg: The CS line the peripheral is connected to - - gpmc,device-width Width of the ONENAND device connected to the GPMC + - gpmc,device-width: Width of the ONENAND device connected to the GPMC in bytes. Must be 1 or 2. Optional properties: - - dma-channel: DMA Channel index + - int-gpios: GPIO specifier for the INT pin. For inline partition table parsing (optional): @@ -35,6 +36,7 @@ Example for an OMAP3430 board: #size-cells = <1>; onenand@0 { + compatible = "ti,omap2-onenand"; reg = <0 0 0>; /* CS0, offset 0 */ gpmc,device-width = <2>; diff --git a/Documentation/devicetree/bindings/mtd/marvell-nand.txt b/Documentation/devicetree/bindings/mtd/marvell-nand.txt new file mode 100644 index 000000000000..c08fb477b3c6 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/marvell-nand.txt @@ -0,0 +1,123 @@ +Marvell NAND Flash Controller (NFC) + +Required properties: +- compatible: can be one of the following: + * "marvell,armada-8k-nand-controller" + * "marvell,armada370-nand-controller" + * "marvell,pxa3xx-nand-controller" + * "marvell,armada-8k-nand" (deprecated) + * "marvell,armada370-nand" (deprecated) + * "marvell,pxa3xx-nand" (deprecated) + Compatibles marked deprecated support only the old bindings described + at the bottom. +- reg: NAND flash controller memory area. +- #address-cells: shall be set to 1. Encode the NAND CS. +- #size-cells: shall be set to 0. +- interrupts: shall define the NAND controller interrupt. +- clocks: shall reference the NAND controller clock. +- marvell,system-controller: Set to retrieve the syscon node that handles + NAND controller related registers (only required with the + "marvell,armada-8k-nand[-controller]" compatibles). + +Optional properties: +- label: see partition.txt. New platforms shall omit this property. +- dmas: shall reference DMA channel associated to the NAND controller. + This property is only used with "marvell,pxa3xx-nand[-controller]" + compatible strings. +- dma-names: shall be "rxtx". + This property is only used with "marvell,pxa3xx-nand[-controller]" + compatible strings. + +Optional children nodes: +Children nodes represent the available NAND chips. + +Required properties: +- reg: shall contain the native Chip Select ids (0-3). +- nand-rb: see nand.txt (0-1). + +Optional properties: +- marvell,nand-keep-config: orders the driver not to take the timings + from the core and leaving them completely untouched. Bootloader + timings will then be used. +- label: MTD name. +- nand-on-flash-bbt: see nand.txt. +- nand-ecc-mode: see nand.txt. Will use hardware ECC if not specified. +- nand-ecc-algo: see nand.txt. This property is essentially useful when + not using hardware ECC. Howerver, it may be added when using hardware + ECC for clarification but will be ignored by the driver because ECC + mode is chosen depending on the page size and the strength required by + the NAND chip. This value may be overwritten with nand-ecc-strength + property. +- nand-ecc-strength: see nand.txt. +- nand-ecc-step-size: see nand.txt. Marvell's NAND flash controller does + use fixed strength (1-bit for Hamming, 16-bit for BCH), so the actual + step size will shrink or grow in order to fit the required strength. + Step sizes are not completely random for all and follow certain + patterns described in AN-379, "Marvell SoC NFC ECC". + +See Documentation/devicetree/bindings/mtd/nand.txt for more details on +generic bindings. + + +Example: +nand_controller: nand-controller@d0000 { + compatible = "marvell,armada370-nand-controller"; + reg = <0xd0000 0x54>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&coredivclk 0>; + + nand@0 { + reg = <0>; + label = "main-storage"; + nand-rb = <0>; + nand-ecc-mode = "hw"; + marvell,nand-keep-config; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "Rootfs"; + reg = <0x00000000 0x40000000>; + }; + }; + }; +}; + + +Note on legacy bindings: One can find, in not-updated device trees, +bindings slightly different than described above with other properties +described below as well as the partitions node at the root of a so +called "nand" node (without clear controller/chip separation). + +Legacy properties: +- marvell,nand-enable-arbiter: To enable the arbiter, all boards blindly + used it, this bit was set by the bootloader for many boards and even if + it is marked reserved in several datasheets, it might be needed to set + it (otherwise it is harmless) so whether or not this property is set, + the bit is selected by the driver. +- num-cs: Number of chip-select lines to use, all boards blindly set 1 + to this and for a reason, other values would have failed. The value of + this property is ignored. + +Example: + + nand0: nand@43100000 { + compatible = "marvell,pxa3xx-nand"; + reg = <0x43100000 90>; + interrupts = <45>; + dmas = <&pdma 97 0>; + dma-names = "rxtx"; + #address-cells = <1>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + num-cs = <1>; + /* Partitions (optional) */ + }; diff --git a/Documentation/devicetree/bindings/mtd/mtk-nand.txt b/Documentation/devicetree/bindings/mtd/mtk-nand.txt index dbf9e054c11c..0025bc4c94a0 100644 --- a/Documentation/devicetree/bindings/mtd/mtk-nand.txt +++ b/Documentation/devicetree/bindings/mtd/mtk-nand.txt @@ -12,8 +12,10 @@ tree nodes. The first part of NFC is NAND Controller Interface (NFI) HW. Required NFI properties: -- compatible: Should be one of "mediatek,mt2701-nfc", - "mediatek,mt2712-nfc". +- compatible: Should be one of + "mediatek,mt2701-nfc", + "mediatek,mt2712-nfc", + "mediatek,mt7622-nfc". - reg: Base physical address and size of NFI. - interrupts: Interrupts of NFI. - clocks: NFI required clocks. @@ -142,7 +144,10 @@ Example: ============== Required BCH properties: -- compatible: Should be one of "mediatek,mt2701-ecc", "mediatek,mt2712-ecc". +- compatible: Should be one of + "mediatek,mt2701-ecc", + "mediatek,mt2712-ecc", + "mediatek,mt7622-ecc". - reg: Base physical address and size of ECC. - interrupts: Interrupts of ECC. - clocks: ECC required clocks. diff --git a/Documentation/devicetree/bindings/mtd/nand.txt b/Documentation/devicetree/bindings/mtd/nand.txt index 133f3813719c..8bb11d809429 100644 --- a/Documentation/devicetree/bindings/mtd/nand.txt +++ b/Documentation/devicetree/bindings/mtd/nand.txt @@ -43,6 +43,7 @@ Optional NAND chip properties: This is particularly useful when only the in-band area is used by the upper layers, and you want to make your NAND as reliable as possible. +- nand-rb: shall contain the native Ready/Busy ids. The ECC strength and ECC step size properties define the correction capability of a controller. Together, they say a controller can correct "{strength} bit diff --git a/MAINTAINERS b/MAINTAINERS index 10732ecfc937..48ae3a43ed0f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2382,13 +2382,6 @@ F: Documentation/devicetree/bindings/input/atmel,maxtouch.txt F: drivers/input/touchscreen/atmel_mxt_ts.c F: include/linux/platform_data/atmel_mxt_ts.h -ATMEL NAND DRIVER -M: Wenyou Yang <wenyou.yang@atmel.com> -M: Josh Wu <rainyfeeling@outlook.com> -L: linux-mtd@lists.infradead.org -S: Supported -F: drivers/mtd/nand/atmel/* - ATMEL SAMA5D2 ADC DRIVER M: Ludovic Desroches <ludovic.desroches@microchip.com> L: linux-iio@vger.kernel.org @@ -8409,6 +8402,13 @@ L: linux-wireless@vger.kernel.org S: Odd Fixes F: drivers/net/wireless/marvell/mwl8k.c +MARVELL NAND CONTROLLER DRIVER +M: Miquel Raynal <miquel.raynal@free-electrons.com> +L: linux-mtd@lists.infradead.org +S: Maintained +F: drivers/mtd/nand/marvell_nand.c +F: Documentation/devicetree/bindings/mtd/marvell-nand.txt + MARVELL SOC MMC/SD/SDIO CONTROLLER DRIVER M: Nicolas Pitre <nico@fluxnic.net> S: Odd Fixes @@ -9045,6 +9045,14 @@ F: drivers/media/platform/atmel/atmel-isc.c F: drivers/media/platform/atmel/atmel-isc-regs.h F: devicetree/bindings/media/atmel-isc.txt +MICROCHIP / ATMEL NAND DRIVER +M: Wenyou Yang <wenyou.yang@microchip.com> +M: Josh Wu <rainyfeeling@outlook.com> +L: linux-mtd@lists.infradead.org +S: Supported +F: drivers/mtd/nand/atmel/* +F: Documentation/devicetree/bindings/mtd/atmel-nand.txt + MICROCHIP KSZ SERIES ETHERNET SWITCH DRIVER M: Woojung Huh <Woojung.Huh@microchip.com> M: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com> diff --git a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi index 1df3ace3af92..63b0b4921e4e 100644 --- a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi +++ b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi @@ -52,6 +52,7 @@ onenand@0,0 { #address-cells = <1>; #size-cells = <1>; + compatible = "ti,omap2-onenand"; reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */ gpmc,sync-read; diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index 4ad7d5565906..f33cc80c9dbc 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -147,32 +147,32 @@ gpmc,sync-read; gpmc,sync-write; gpmc,burst-length = <16>; - gpmc,burst-read; gpmc,burst-wrap; + gpmc,burst-read; gpmc,burst-write; gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */ gpmc,mux-add-data = <2>; /* GPMC_MUX_AD */ gpmc,cs-on-ns = <0>; - gpmc,cs-rd-off-ns = <87>; - gpmc,cs-wr-off-ns = <87>; + gpmc,cs-rd-off-ns = <96>; + gpmc,cs-wr-off-ns = <96>; gpmc,adv-on-ns = <0>; - gpmc,adv-rd-off-ns = <10>; - gpmc,adv-wr-off-ns = <10>; - gpmc,oe-on-ns = <15>; - gpmc,oe-off-ns = <87>; + gpmc,adv-rd-off-ns = <12>; + gpmc,adv-wr-off-ns = <12>; + gpmc,oe-on-ns = <18>; + gpmc,oe-off-ns = <96>; gpmc,we-on-ns = <0>; - gpmc,we-off-ns = <87>; - gpmc,rd-cycle-ns = <112>; - gpmc,wr-cycle-ns = <112>; - gpmc,access-ns = <81>; - gpmc,page-burst-access-ns = <15>; + gpmc,we-off-ns = <96>; + gpmc,rd-cycle-ns = <114>; + gpmc,wr-cycle-ns = <114>; + gpmc,access-ns = <90>; + gpmc,page-burst-access-ns = <12>; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,wait-monitoring-ns = <0>; - gpmc,clk-activation-ns = <5>; + gpmc,clk-activation-ns = <6>; gpmc,wr-data-mux-bus-ns = <30>; - gpmc,wr-access-ns = <81>; - gpmc,sync-clk-ps = <15000>; + gpmc,wr-access-ns = <90>; + gpmc,sync-clk-ps = <12000>; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 669c51c00c00..e7c7b8e50703 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -838,6 +838,7 @@ onenand@0,0 { #address-cells = <1>; #size-cells = <1>; + compatible = "ti,omap2-onenand"; reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */ gpmc,sync-read; diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi index 12fbb3da5fce..0d9b85317529 100644 --- a/arch/arm/boot/dts/omap3-n950-n9.dtsi +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi @@ -367,6 +367,7 @@ onenand@0,0 { #address-cells = <1>; #size-cells = <1>; + compatible = "ti,omap2-onenand"; reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */ gpmc,sync-read; diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts index 908951eb5943..d652708f6bef 100644 --- a/arch/arm/boot/dts/omap3430-sdp.dts +++ b/arch/arm/boot/dts/omap3430-sdp.dts @@ -154,6 +154,7 @@ linux,mtd-name= "samsung,kfm2g16q2m-deb8"; #address-cells = <1>; #size-cells = <1>; + compatible = "ti,omap2-onenand"; reg = <2 0 0x20000>; /* CS2, offset 0, IO size 4 */ gpmc,device-width = <2>; diff --git a/arch/arm/configs/mvebu_v7_defconfig b/arch/arm/configs/mvebu_v7_defconfig index 69553704f2dc..4b6e4fd47e5d 100644 --- a/arch/arm/configs/mvebu_v7_defconfig +++ b/arch/arm/configs/mvebu_v7_defconfig @@ -57,7 +57,7 @@ CONFIG_MTD_CFI_STAA=y CONFIG_MTD_PHYSMAP_OF=y CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_PXA3xx=y +CONFIG_MTD_NAND_MARVELL=y CONFIG_MTD_SPI_NOR=y CONFIG_SRAM=y CONFIG_MTD_UBI=y diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 2f722a805948..c15bbcad5f67 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -232,6 +232,3 @@ obj-y += $(omap-hsmmc-m) $(omap-hsmmc-y) obj-y += omap_phy_internal.o obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o - -onenand-$(CONFIG_MTD_ONENAND_OMAP2) := gpmc-onenand.o -obj-y += $(onenand-m) $(onenand-y) diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c deleted file mode 100644 index 2944af820558..000000000000 --- a/arch/arm/mach-omap2/gpmc-onenand.c +++ /dev/null @@ -1,409 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/gpmc-onenand.c - * - * Copyright (C) 2006 - 2009 Nokia Corporation - * Contacts: Juha Yrjola - * Tony Lindgren - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/string.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/mtd/onenand_regs.h> -#include <linux/io.h> -#include <linux/omap-gpmc.h> -#include <linux/platform_data/mtd-onenand-omap2.h> -#include <linux/err.h> - -#include <asm/mach/flash.h> - -#include "soc.h" - -#define ONENAND_IO_SIZE SZ_128K - -#define ONENAND_FLAG_SYNCREAD (1 << 0) -#define ONENAND_FLAG_SYNCWRITE (1 << 1) -#define ONENAND_FLAG_HF (1 << 2) -#define ONENAND_FLAG_VHF (1 << 3) - -static unsigned onenand_flags; -static unsigned latency; - -static struct omap_onenand_platform_data *gpmc_onenand_data; - -static struct resource gpmc_onenand_resource = { - .flags = IORESOURCE_MEM, -}; - -static struct platform_device gpmc_onenand_device = { - .name = "omap2-onenand", - .id = -1, - .num_resources = 1, - .resource = &gpmc_onenand_resource, -}; - -static struct gpmc_settings onenand_async = { - .device_width = GPMC_DEVWIDTH_16BIT, - .mux_add_data = GPMC_MUX_AD, -}; - -static struct gpmc_settings onenand_sync = { - .burst_read = true, - .burst_wrap = true, - .burst_len = GPMC_BURST_16, - .device_width = GPMC_DEVWIDTH_16BIT, - .mux_add_data = GPMC_MUX_AD, - .wait_pin = 0, -}; - -static void omap2_onenand_calc_async_timings(struct gpmc_timings *t) -{ - struct gpmc_device_timings dev_t; - const int t_cer = 15; - const int t_avdp = 12; - const int t_aavdh = 7; - const int t_ce = 76; - const int t_aa = 76; - const int t_oe = 20; - const int t_cez = 20; /* max of t_cez, t_oez */ - const int t_wpl = 40; - const int t_wph = 30; - - memset(&dev_t, 0, sizeof(dev_t)); - - dev_t.t_avdp_r = max_t(int, t_avdp, t_cer) * 1000; - dev_t.t_avdp_w = dev_t.t_avdp_r; - dev_t.t_aavdh = t_aavdh * 1000; - dev_t.t_aa = t_aa * 1000; - dev_t.t_ce = t_ce * 1000; - dev_t.t_oe = t_oe * 1000; - dev_t.t_cez_r = t_cez * 1000; - dev_t.t_cez_w = dev_t.t_cez_r; - dev_t.t_wpl = t_wpl * 1000; - dev_t.t_wph = t_wph * 1000; - - gpmc_calc_timings(t, &onenand_async, &dev_t); -} - -static void omap2_onenand_set_async_mode(void __iomem *onenand_base) -{ - u32 reg; - - /* Ensure sync read and sync write are disabled */ - reg = readw(onenand_base + ONENAND_REG_SYS_CFG1); - reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE; - writew(reg, onenand_base + ONENAND_REG_SYS_CFG1); -} - -static void set_onenand_cfg(void __iomem *onenand_base) -{ - u32 reg = ONENAND_SYS_CFG1_RDY | ONENAND_SYS_CFG1_INT; - - reg |= (latency << ONENAND_SYS_CFG1_BRL_SHIFT) | - ONENAND_SYS_CFG1_BL_16; - if (onenand_flags & ONENAND_FLAG_SYNCREAD) - reg |= ONENAND_SYS_CFG1_SYNC_READ; - else - reg &= ~ONENAND_SYS_CFG1_SYNC_READ; - if (onenand_flags & ONENAND_FLAG_SYNCWRITE) - reg |= ONENAND_SYS_CFG1_SYNC_WRITE; - else - reg &= ~ONENAND_SYS_CFG1_SYNC_WRITE; - if (onenand_flags & ONENAND_FLAG_HF) - reg |= ONENAND_SYS_CFG1_HF; - else - reg &= ~ONENAND_SYS_CFG1_HF; - if (onenand_flags & ONENAND_FLAG_VHF) - reg |= ONENAND_SYS_CFG1_VHF; - else - reg &= ~ONENAND_SYS_CFG1_VHF; - - writew(reg, onenand_base + ONENAND_REG_SYS_CFG1); -} - -static int omap2_onenand_get_freq(struct omap_onenand_platform_data *cfg, - void __iomem *onenand_base) -{ - u16 ver = readw(onenand_base + ONENAND_REG_VERSION_ID); - int freq; - - switch ((ver >> 4) & 0xf) { - case 0: - freq = 40; - break; - case 1: - freq = 54; - break; - case 2: - freq = 66; - break; - case 3: - freq = 83; - break; - case 4: - freq = 104; - break; - default: - pr_err("onenand rate not detected, bad GPMC async timings?\n"); - freq = 0; - } - - return freq; -} - -static void omap2_onenand_calc_sync_timings(struct gpmc_timings *t, - unsigned int flags, - int freq) -{ - struct gpmc_device_timings dev_t; - const int t_cer = 15; - const int t_avdp = 12; - const int t_cez = 20; /* max of t_cez, t_oez */ - const int t_wpl = 40; - const int t_wph = 30; - int min_gpmc_clk_period, t_ces, t_avds, t_avdh, t_ach, t_aavdh, t_rdyo; - int div, gpmc_clk_ns; - - if (flags & ONENAND_SYNC_READ) - onenand_flags = ONENAND_FLAG_SYNCREAD; - else if (flags & ONENAND_SYNC_READWRITE) - onenand_flags = ONENAND_FLAG_SYNCREAD | ONENAND_FLAG_SYNCWRITE; - - switch (freq) { - case 104: - min_gpmc_clk_period = 9600; /* 104 MHz */ - t_ces = 3; - t_avds = 4; - t_avdh = 2; - t_ach |