summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/x86/include/asm/apic.h48
-rw-r--r--arch/x86/include/asm/irq_vectors.h4
-rw-r--r--arch/x86/kernel/apic/apic.c81
-rw-r--r--arch/x86/kernel/apic/apic_flat_64.c119
-rw-r--r--arch/x86/kernel/apic/io_apic.c749
-rw-r--r--arch/x86/kernel/mpparse.c13
-rw-r--r--drivers/iommu/intel/irq_remapping.c11
7 files changed, 378 insertions, 647 deletions
diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index 9327eb00e96d..f21ff1932699 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -18,6 +18,11 @@
#define ARCH_APICTIMER_STOPS_ON_C3 1
+/* Macros for apic_extnmi which controls external NMI masking */
+#define APIC_EXTNMI_BSP 0 /* Default */
+#define APIC_EXTNMI_ALL 1
+#define APIC_EXTNMI_NONE 2
+
/*
* Debugging macros
*/
@@ -25,22 +30,22 @@
#define APIC_VERBOSE 1
#define APIC_DEBUG 2
-/* Macros for apic_extnmi which controls external NMI masking */
-#define APIC_EXTNMI_BSP 0 /* Default */
-#define APIC_EXTNMI_ALL 1
-#define APIC_EXTNMI_NONE 2
-
/*
- * Define the default level of output to be very little
- * This can be turned up by using apic=verbose for more
- * information and apic=debug for _lots_ of information.
- * apic_verbosity is defined in apic.c
+ * Define the default level of output to be very little This can be turned
+ * up by using apic=verbose for more information and apic=debug for _lots_
+ * of information. apic_verbosity is defined in apic.c
*/
-#define apic_printk(v, s, a...) do { \
- if ((v) <= apic_verbosity) \
- printk(s, ##a); \
- } while (0)
-
+#define apic_printk(v, s, a...) \
+do { \
+ if ((v) <= apic_verbosity) \
+ printk(s, ##a); \
+} while (0)
+
+#define apic_pr_verbose(s, a...) apic_printk(APIC_VERBOSE, KERN_INFO s, ##a)
+#define apic_pr_debug(s, a...) apic_printk(APIC_DEBUG, KERN_DEBUG s, ##a)
+#define apic_pr_debug_cont(s, a...) apic_printk(APIC_DEBUG, KERN_CONT s, ##a)
+/* Unconditional debug prints for code which is guarded by apic_verbosity already */
+#define apic_dbg(s, a...) printk(KERN_DEBUG s, ##a)
#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_32)
extern void x86_32_probe_apic(void);
@@ -122,8 +127,6 @@ static inline bool apic_is_x2apic_enabled(void)
extern void enable_IR_x2apic(void);
-extern int get_physical_broadcast(void);
-
extern int lapic_get_maxlvt(void);
extern void clear_local_APIC(void);
extern void disconnect_bsp_APIC(int virt_wire_setup);
@@ -345,20 +348,12 @@ extern struct apic *apic;
* APIC drivers are probed based on how they are listed in the .apicdrivers
* section. So the order is important and enforced by the ordering
* of different apic driver files in the Makefile.
- *
- * For the files having two apic drivers, we use apic_drivers()
- * to enforce the order with in them.
*/
#define apic_driver(sym) \
static const struct apic *__apicdrivers_##sym __used \
__aligned(sizeof(struct apic *)) \
__section(".apicdrivers") = { &sym }
-#define apic_drivers(sym1, sym2) \
- static struct apic *__apicdrivers_##sym1##sym2[2] __used \
- __aligned(sizeof(struct apic *)) \
- __section(".apicdrivers") = { &sym1, &sym2 }
-
extern struct apic *__apicdrivers[], *__apicdrivers_end[];
/*
@@ -484,7 +479,6 @@ static inline u64 apic_icr_read(void) { return 0; }
static inline void apic_icr_write(u32 low, u32 high) { }
static inline void apic_wait_icr_idle(void) { }
static inline u32 safe_apic_wait_icr_idle(void) { return 0; }
-static inline void apic_set_eoi_cb(void (*eoi)(void)) {}
static inline void apic_native_eoi(void) { WARN_ON_ONCE(1); }
static inline void apic_setup_apic_calls(void) { }
@@ -512,8 +506,6 @@ static inline bool is_vector_pending(unsigned int vector)
#define TRAMPOLINE_PHYS_LOW 0x467
#define TRAMPOLINE_PHYS_HIGH 0x469
-extern void generic_bigsmp_probe(void);
-
#ifdef CONFIG_X86_LOCAL_APIC
#include <asm/smp.h>
@@ -536,8 +528,6 @@ static inline int default_acpi_madt_oem_check(char *a, char *b) { return 0; }
static inline void x86_64_probe_apic(void) { }
#endif
-extern int default_apic_id_valid(u32 apicid);
-
extern u32 apic_default_calc_apicid(unsigned int cpu);
extern u32 apic_flat_calc_apicid(unsigned int cpu);
diff --git a/arch/x86/include/asm/irq_vectors.h b/arch/x86/include/asm/irq_vectors.h
index 13aea8fc3d45..47051871b436 100644
--- a/arch/x86/include/asm/irq_vectors.h
+++ b/arch/x86/include/asm/irq_vectors.h
@@ -18,8 +18,8 @@
* Vectors 0 ... 31 : system traps and exceptions - hardcoded events
* Vectors 32 ... 127 : device interrupts
* Vector 128 : legacy int80 syscall interface
- * Vectors 129 ... LOCAL_TIMER_VECTOR-1
- * Vectors LOCAL_TIMER_VECTOR ... 255 : special interrupts
+ * Vectors 129 ... FIRST_SYSTEM_VECTOR-1 : device interrupts
+ * Vectors FIRST_SYSTEM_VECTOR ... 255 : special interrupts
*
* 64-bit x86 has per CPU IDT tables, 32-bit has one shared IDT table.
*
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 373638691cd4..6513c53c9459 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -677,7 +677,7 @@ calibrate_by_pmtimer(u32 deltapm, long *delta, long *deltatsc)
return -1;
#endif
- apic_printk(APIC_VERBOSE, "... PM-Timer delta = %u\n", deltapm);
+ apic_pr_verbose("... PM-Timer delta = %u\n", deltapm);
/* Check, if the PM timer is available */
if (!deltapm)
@@ -687,14 +687,14 @@ calibrate_by_pmtimer(u32 deltapm, long *delta, long *deltatsc)
if (deltapm > (pm_100ms - pm_thresh) &&
deltapm < (pm_100ms + pm_thresh)) {
- apic_printk(APIC_VERBOSE, "... PM-Timer result ok\n");
+ apic_pr_verbose("... PM-Timer result ok\n");
return 0;
}
res = (((u64)deltapm) * mult) >> 22;
do_div(res, 1000000);
- pr_warn("APIC calibration not consistent "
- "with PM-Timer: %ldms instead of 100ms\n", (long)res);
+ pr_warn("APIC calibration not consistent with PM-Timer: %ldms instead of 100ms\n",
+ (long)res);
/* Correct the lapic counter value */
res = (((u64)(*delta)) * pm_100ms);
@@ -707,9 +707,8 @@ calibrate_by_pmtimer(u32 deltapm, long *delta, long *deltatsc)
if (boot_cpu_has(X86_FEATURE_TSC)) {
res = (((u64)(*deltatsc)) * pm_100ms);
do_div(res, deltapm);
- apic_printk(APIC_VERBOSE, "TSC delta adjusted to "
- "PM-Timer: %lu (%ld)\n",
- (unsigned long)res, *deltatsc);
+ apic_pr_verbose("TSC delta adjusted to PM-Timer: %lu (%ld)\n",
+ (unsigned long)res, *deltatsc);
*deltatsc = (long)res;
}
@@ -792,8 +791,7 @@ static int __init calibrate_APIC_clock(void)
* in the clockevent structure and return.
*/
if (!lapic_init_clockevent()) {
- apic_printk(APIC_VERBOSE, "lapic timer already calibrated %d\n",
- lapic_timer_period);
+ apic_pr_verbose("lapic timer already calibrated %d\n", lapic_timer_period);
/*
* Direct calibration methods must have an always running
* local APIC timer, no need for broadcast timer.
@@ -802,8 +800,7 @@ static int __init calibrate_APIC_clock(void)
return 0;
}
- apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n"
- "calibrating APIC timer ...\n");
+ apic_pr_verbose("Using local APIC timer interrupts. Calibrating APIC timer ...\n");
/*
* There are platforms w/o global clockevent devices. Instead of
@@ -866,7 +863,7 @@ static int __init calibrate_APIC_clock(void)
/* Build delta t1-t2 as apic timer counts down */
delta = lapic_cal_t1 - lapic_cal_t2;
- apic_printk(APIC_VERBOSE, "... lapic delta = %ld\n", delta);
+ apic_pr_verbose("... lapic delta = %ld\n", delta);
deltatsc = (long)(lapic_cal_tsc2 - lapic_cal_tsc1);
@@ -877,22 +874,19 @@ static int __init calibrate_APIC_clock(void)
lapic_timer_period = (delta * APIC_DIVISOR) / LAPIC_CAL_LOOPS;
lapic_init_clockevent();
- apic_printk(APIC_VERBOSE, "..... delta %ld\n", delta);
- apic_printk(APIC_VERBOSE, "..... mult: %u\n", lapic_clockevent.mult);
- apic_printk(APIC_VERBOSE, "..... calibration result: %u\n",
- lapic_timer_period);
+ apic_pr_verbose("..... delta %ld\n", delta);
+ apic_pr_verbose("..... mult: %u\n", lapic_clockevent.mult);
+ apic_pr_verbose("..... calibration result: %u\n", lapic_timer_period);
if (boot_cpu_has(X86_FEATURE_TSC)) {
- apic_printk(APIC_VERBOSE, "..... CPU clock speed is "
- "%ld.%04ld MHz.\n",
- (deltatsc / LAPIC_CAL_LOOPS) / (1000000 / HZ),
- (deltatsc / LAPIC_CAL_LOOPS) % (1000000 / HZ));
+ apic_pr_verbose("..... CPU clock speed is %ld.%04ld MHz.\n",
+ (deltatsc / LAPIC_CAL_LOOPS) / (1000000 / HZ),
+ (deltatsc / LAPIC_CAL_LOOPS) % (1000000 / HZ));
}
- apic_printk(APIC_VERBOSE, "..... host bus clock speed is "
- "%u.%04u MHz.\n",
- lapic_timer_period / (1000000 / HZ),
- lapic_timer_period % (1000000 / HZ));
+ apic_pr_verbose("..... host bus clock speed is %u.%04u MHz.\n",
+ lapic_timer_period / (1000000 / HZ),
+ lapic_timer_period % (1000000 / HZ));
/*
* Do a sanity check on the APIC calibration result
@@ -911,7 +905,7 @@ static int __init calibrate_APIC_clock(void)
* available.
*/
if (!pm_referenced && global_clock_event) {
- apic_printk(APIC_VERBOSE, "... verify APIC timer\n");
+ apic_pr_verbose("... verify APIC timer\n");
/*
* Setup the apic timer manually
@@ -932,11 +926,11 @@ static int __init calibrate_APIC_clock(void)
/* Jiffies delta */
deltaj = lapic_cal_j2 - lapic_cal_j1;
- apic_printk(APIC_VERBOSE, "... jiffies delta = %lu\n", deltaj);
+ apic_pr_verbose("... jiffies delta = %lu\n", deltaj);
/* Check, if the jiffies result is consistent */
if (deltaj >= LAPIC_CAL_LOOPS-2 && deltaj <= LAPIC_CAL_LOOPS+2)
- apic_printk(APIC_VERBOSE, "... jiffies result ok\n");
+ apic_pr_verbose("... jiffies result ok\n");
else
levt->features |= CLOCK_EVT_FEAT_DUMMY;
}
@@ -1221,9 +1215,8 @@ void __init sync_Arb_IDs(void)
*/
apic_wait_icr_idle();
- apic_printk(APIC_DEBUG, "Synchronizing Arb IDs.\n");
- apic_write(APIC_ICR, APIC_DEST_ALLINC |
- APIC_INT_LEVELTRIG | APIC_DM_INIT);
+ apic_pr_debug("Synchronizing Arb IDs.\n");
+ apic_write(APIC_ICR, APIC_DEST_ALLINC | APIC_INT_LEVELTRIG | APIC_DM_INIT);
}
enum apic_intr_mode_id apic_intr_mode __ro_after_init;
@@ -1409,10 +1402,10 @@ static void lapic_setup_esr(void)
if (maxlvt > 3)
apic_write(APIC_ESR, 0);
value = apic_read(APIC_ESR);
- if (value != oldvalue)
- apic_printk(APIC_VERBOSE, "ESR value before enabling "
- "vector: 0x%08x after: 0x%08x\n",
- oldvalue, value);
+ if (value != oldvalue) {
+ apic_pr_verbose("ESR value before enabling vector: 0x%08x after: 0x%08x\n",
+ oldvalue, value);
+ }
}
#define APIC_IR_REGS APIC_ISR_NR
@@ -1599,10 +1592,10 @@ static void setup_local_APIC(void)
value = apic_read(APIC_LVT0) & APIC_LVT_MASKED;
if (!cpu && (pic_mode || !value || ioapic_is_disabled)) {
value = APIC_DM_EXTINT;
- apic_printk(APIC_VERBOSE, "enabled ExtINT on CPU#%d\n", cpu);
+ apic_pr_verbose("Enabled ExtINT on CPU#%d\n", cpu);
} else {
value = APIC_DM_EXTINT | APIC_LVT_MASKED;
- apic_printk(APIC_VERBOSE, "masked ExtINT on CPU#%d\n", cpu);
+ apic_pr_verbose("Masked ExtINT on CPU#%d\n", cpu);
}
apic_write(APIC_LVT0, value);
@@ -2067,8 +2060,7 @@ static __init void apic_set_fixmap(bool read_apic)
{
set_fixmap_nocache(FIX_APIC_BASE, mp_lapic_addr);
apic_mmio_base = APIC_BASE;
- apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n",
- apic_mmio_base, mp_lapic_addr);
+ apic_pr_verbose("Mapped APIC to %16lx (%16lx)\n", apic_mmio_base, mp_lapic_addr);
if (read_apic)
apic_read_boot_cpu_id(false);
}
@@ -2171,18 +2163,17 @@ DEFINE_IDTENTRY_SYSVEC(sysvec_error_interrupt)
apic_eoi();
atomic_inc(&irq_err_count);
- apic_printk(APIC_DEBUG, KERN_DEBUG "APIC error on CPU%d: %02x",
- smp_processor_id(), v);
+ apic_pr_debug("APIC error on CPU%d: %02x", smp_processor_id(), v);
v &= 0xff;
while (v) {
if (v & 0x1)
- apic_printk(APIC_DEBUG, KERN_CONT " : %s", error_interrupt_reason[i]);
+ apic_pr_debug_cont(" : %s", error_interrupt_reason[i]);
i++;
v >>= 1;
}
- apic_printk(APIC_DEBUG, KERN_CONT "\n");
+ apic_pr_debug_cont("\n");
trace_error_apic_exit(ERROR_APIC_VECTOR);
}
@@ -2202,8 +2193,7 @@ static void __init connect_bsp_APIC(void)
* PIC mode, enable APIC mode in the IMCR, i.e. connect BSP's
* local APIC to INT and NMI lines.
*/
- apic_printk(APIC_VERBOSE, "leaving PIC mode, "
- "enabling APIC mode.\n");
+ apic_pr_verbose("Leaving PIC mode, enabling APIC mode.\n");
imcr_pic_to_apic();
}
#endif
@@ -2228,8 +2218,7 @@ void disconnect_bsp_APIC(int virt_wire_setup)
* IPIs, won't work beyond this point! The only exception are
* INIT IPIs.
*/
- apic_printk(APIC_VERBOSE, "disabling APIC mode, "
- "entering PIC mode.\n");
+ apic_pr_verbose("Disabling APIC mode, entering PIC mode.\n");
imcr_apic_to_pic();
return;
}
diff --git a/arch/x86/kernel/apic/apic_flat_64.c b/arch/x86/kernel/apic/apic_flat_64.c
index f37ad3392fec..e0308d8c4e6c 100644
--- a/arch/x86/kernel/apic/apic_flat_64.c
+++ b/arch/x86/kernel/apic/apic_flat_64.c
@@ -8,129 +8,25 @@
* Martin Bligh, Andi Kleen, James Bottomley, John Stultz, and
* James Cleverdon.
*/
-#include <linux/cpumask.h>
#include <linux/export.h>
-#include <linux/acpi.h>
-#include <asm/jailhouse_para.h>
#include <asm/apic.h>
#include "local.h"
-static struct apic apic_physflat;
-static struct apic apic_flat;
-
-struct apic *apic __ro_after_init = &apic_flat;
-EXPORT_SYMBOL_GPL(apic);
-
-static int flat_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
-{
- return 1;
-}
-
-static void _flat_send_IPI_mask(unsigned long mask, int vector)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- __default_send_IPI_dest_field(mask, vector, APIC_DEST_LOGICAL);
- local_irq_restore(flags);
-}
-
-static void flat_send_IPI_mask(const struct cpumask *cpumask, int vector)
-{
- unsigned long mask = cpumask_bits(cpumask)[0];
-
- _flat_send_IPI_mask(mask, vector);
-}
-
-static void
-flat_send_IPI_mask_allbutself(const struct cpumask *cpumask, int vector)
-{
- unsigned long mask = cpumask_bits(cpumask)[0];
- int cpu = smp_processor_id();
-
- if (cpu < BITS_PER_LONG)
- __clear_bit(cpu, &mask);
-
- _flat_send_IPI_mask(mask, vector);
-}
-
-static u32 flat_get_apic_id(u32 x)
+static u32 physflat_get_apic_id(u32 x)
{
return (x >> 24) & 0xFF;
}
-static int flat_probe(void)
+static int physflat_probe(void)
{
return 1;
}
-static struct apic apic_flat __ro_after_init = {
- .name = "flat",
- .probe = flat_probe,
- .acpi_madt_oem_check = flat_acpi_madt_oem_check,
-
- .dest_mode_logical = true,
-
- .disable_esr = 0,
-
- .init_apic_ldr = default_init_apic_ldr,
- .cpu_present_to_apicid = default_cpu_present_to_apicid,
-
- .max_apic_id = 0xFE,
- .get_apic_id = flat_get_apic_id,
-
- .calc_dest_apicid = apic_flat_calc_apicid,
-
- .send_IPI = default_send_IPI_single,
- .send_IPI_mask = flat_send_IPI_mask,
- .send_IPI_mask_allbutself = flat_send_IPI_mask_allbutself,
- .send_IPI_allbutself = default_send_IPI_allbutself,
- .send_IPI_all = default_send_IPI_all,
- .send_IPI_self = default_send_IPI_self,
- .nmi_to_offline_cpu = true,
-
- .read = native_apic_mem_read,
- .write = native_apic_mem_write,
- .eoi = native_apic_mem_eoi,
- .icr_read = native_apic_icr_read,
- .icr_write = native_apic_icr_write,
- .wait_icr_idle = apic_mem_wait_icr_idle,
- .safe_wait_icr_idle = apic_mem_wait_icr_idle_timeout,
-};
-
-/*
- * Physflat mode is used when there are more than 8 CPUs on a system.
- * We cannot use logical delivery in this case because the mask
- * overflows, so use physical mode.
- */
static int physflat_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
{
-#ifdef CONFIG_ACPI
- /*
- * Quirk: some x86_64 machines can only use physical APIC mode
- * regardless of how many processors are present (x86_64 ES7000
- * is an example).
- */
- if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
- (acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL)) {
- printk(KERN_DEBUG "system APIC only can use physical flat");
- return 1;
- }
-
- if (!strncmp(oem_id, "IBM", 3) && !strncmp(oem_table_id, "EXA", 3)) {
- printk(KERN_DEBUG "IBM Summit detected, will use apic physical");
- return 1;
- }
-#endif
-
- return 0;
-}
-
-static int physflat_probe(void)
-{
- return apic == &apic_physflat || num_possible_cpus() > 8 || jailhouse_paravirt();
+ return 1;
}
static struct apic apic_physflat __ro_after_init = {
@@ -146,7 +42,7 @@ static struct apic apic_physflat __ro_after_init = {
.cpu_present_to_apicid = default_cpu_present_to_apicid,
.max_apic_id = 0xFE,
- .get_apic_id = flat_get_apic_id,
+ .get_apic_id = physflat_get_apic_id,
.calc_dest_apicid = apic_default_calc_apicid,
@@ -166,8 +62,7 @@ static struct apic apic_physflat __ro_after_init = {
.wait_icr_idle = apic_mem_wait_icr_idle,
.safe_wait_icr_idle = apic_mem_wait_icr_idle_timeout,
};
+apic_driver(apic_physflat);
-/*
- * We need to check for physflat first, so this order is important.
- */
-apic_drivers(apic_physflat, apic_flat);
+struct apic *apic __ro_after_init = &apic_physflat;
+EXPORT_SYMBOL_GPL(apic);
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 477b740b2f26..1029ea4ac8ba 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -86,8 +86,8 @@ static unsigned int ioapic_dynirq_base;
static int ioapic_initialized;
struct irq_pin_list {
- struct list_head list;
- int apic, pin;
+ struct list_head list;
+ int apic, pin;
};
struct mp_chip_data {
@@ -96,7 +96,7 @@ struct mp_chip_data {
bool is_level;
bool active_low;
bool isa_irq;
- u32 count;
+ u32 count;
};
struct mp_ioapic_gsi {
@@ -105,21 +105,17 @@ struct mp_ioapic_gsi {
};
static struct ioapic {
- /*
- * # of IRQ routing registers
- */
- int nr_registers;
- /*
- * Saved state during suspend/resume, or while enabling intr-remap.
- */
- struct IO_APIC_route_entry *saved_registers;
+ /* # of IRQ routing registers */
+ int nr_registers;
+ /* Saved state during suspend/resume, or while enabling intr-remap. */
+ struct IO_APIC_route_entry *saved_registers;
/* I/O APIC config */
- struct mpc_ioapic mp_config;
+ struct mpc_ioapic mp_config;
/* IO APIC gsi routing info */
- struct mp_ioapic_gsi gsi_config;
- struct ioapic_domain_cfg irqdomain_cfg;
- struct irq_domain *irqdomain;
- struct resource *iomem_res;
+ struct mp_ioapic_gsi gsi_config;
+ struct ioapic_domain_cfg irqdomain_cfg;
+ struct irq_domain *irqdomain;
+ struct resource *iomem_res;
} ioapics[MAX_IO_APICS];
#define mpc_ioapic_ver(ioapic_idx) ioapics[ioapic_idx].mp_config.apicver
@@ -205,10 +201,9 @@ void mp_save_irq(struct mpc_intsrc *m)
{
int i;
- apic_printk(APIC_VERBOSE, "Int: type %d, pol %d, trig %d, bus %02x,"
- " IRQ %02x, APIC ID %x, APIC INT %02x\n",
- m->irqtype, m->irqflag & 3, (m->irqflag >> 2) & 3, m->srcbus,
- m->srcbusirq, m->dstapic, m->dstirq);
+ apic_pr_verbose("Int: type %d, pol %d, trig %d, bus %02x, IRQ %02x, APIC ID %x, APIC INT %02x\n",
+ m->irqtype, m->irqflag & 3, (m->irqflag >> 2) & 3, m->srcbus,
+ m->srcbusirq, m->dstapic, m->dstirq);
for (i = 0; i < mp_irq_entries; i++) {
if (!memcmp(&mp_irqs[i], m, sizeof(*m)))
@@ -269,12 +264,14 @@ static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx)
static inline void io_apic_eoi(unsigned int apic, unsigned int vector)
{
struct io_apic __iomem *io_apic = io_apic_base(apic);
+
writel(vector, &io_apic->eoi);
}
unsigned int native_io_apic_read(unsigned int apic, unsigned int reg)
{
struct io_apic __iomem *io_apic = io_apic_base(apic);
+
writel(reg, &io_apic->index);
return readl(&io_apic->data);
}
@@ -300,14 +297,8 @@ static struct IO_APIC_route_entry __ioapic_read_entry(int apic, int pin)
static struct IO_APIC_route_entry ioapic_read_entry(int apic, int pin)
{
- struct IO_APIC_route_entry entry;
- unsigned long flags;
-
- raw_spin_lock_irqsave(&ioapic_lock, flags);
- entry = __ioapic_read_entry(apic, pin);
- raw_spin_unlock_irqrestore(&ioapic_lock, flags);
-
- return entry;
+ guard(raw_spinlock_irqsave)(&ioapic_lock);
+ return __ioapic_read_entry(apic, pin);
}
/*
@@ -324,11 +315,8 @@ static void __ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e
static void ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e)
{
- unsigned long flags;
-
- raw_spin_lock_irqsave(&ioapic_lock, flags);
+ guard(raw_spinlock_irqsave)(&ioapic_lock);
__ioapic_write_entry(apic, pin, e);
- raw_spin_unlock_irqrestore(&ioapic_lock, flags);
}
/*
@@ -339,12 +327,10 @@ static void ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e)
static void ioapic_mask_entry(int apic, int pin)
{
struct IO_APIC_route_entry e = { .masked = true };
- unsigned long flags;
- raw_spin_lock_irqsave(&ioapic_lock, flags);
+ guard(raw_spinlock_irqsave)(&ioapic_lock);
io_apic_write(apic, 0x10 + 2*pin, e.w1);
io_apic_write(apic, 0x11 + 2*pin, e.w2);
- raw_spin_unlock_irqrestore(&ioapic_lock, flags);
}
/*
@@ -352,68 +338,39 @@ static void ioapic_mask_entry(int apic, int pin)
* shared ISA-space IRQs, so we have to support them. We are super
* fast in the common case, and fast for shared ISA-space IRQs.
*/
-static int __add_pin_to_irq_node(struct mp_chip_data *data,
- int node, int apic, int pin)
+static bool add_pin_to_irq_node(struct mp_chip_data *data, int node, int apic, int pin)
{
struct irq_pin_list *entry;
- /* don't allow duplicates */
- for_each_irq_pin(entry, data->irq_2_pin)
+ /* Don't allow duplicates */
+ for_each_irq_pin(entry, data->irq_2_pin) {
if (entry->apic == apic && entry->pin == pin)
- return 0;
+ return true;
+ }
entry = kzalloc_node(sizeof(struct irq_pin_list), GFP_ATOMIC, node);
if (!entry) {
- pr_err("can not alloc irq_pin_list (%d,%d,%d)\n",
- node, apic, pin);
- return -ENOMEM;
+ pr_err("Cannot allocate irq_pin_list (%d,%d,%d)\n", node, apic, pin);
+ return false;
}
+
entry->apic = apic;
entry->pin = pin;
list_add_tail(&entry->list, &data->irq_2_pin);
-
- return 0;
+ return true;
}
static void __remove_pin_from_irq(struct mp_chip_data *data, int apic, int pin)
{
struct irq_pin_list *tmp, *entry;
- list_for_each_entry_safe(entry, tmp, &data->irq_2_pin, list)
+ list_for_each_entry_safe(entry, tmp, &data->irq_2_pin, list) {
if (entry->apic == apic && entry->pin == pin) {
list_del(&entry->list);
kfree(entry);
return;
}
-}
-
-static void add_pin_to_irq_node(struct mp_chip_data *data,
- int node, int apic, int pin)
-{
- if (__add_pin_to_irq_node(data, node, apic, pin))
- panic("IO-APIC: failed to add irq-pin. Can not proceed\n");
-}
-
-/*
- * Reroute an IRQ to a different pin.
- */
-static void __init replace_pin_at_irq_node(struct mp_chip_data *data, int node,
- int oldapic, int oldpin,
- int newapic, int newpin)
-{
- struct irq_pin_list *entry;
-
- for_each_irq_pin(entry, data->irq_2_pin) {
- if (entry->apic == oldapic && entry->pin == oldpin) {
- entry->apic = newapic;
- entry->pin = newpin;
- /* every one is different, right? */
- return;
- }
}
-
- /* old apic/pin didn't exist, so just add new ones */
- add_pin_to_irq_node(data, node, newapic, newpin);
}
static void io_apic_modify_irq(struct mp_chip_data *data, bool masked,
@@ -430,12 +387,12 @@ static void io_apic_modify_irq(struct mp_chip_data *data, bool masked,
}
}
+/*
+ * Synchronize the IO-APIC and the CPU by doing a dummy read from the
+ * IO-APIC
+ */
static void io_apic_sync(struct irq_pin_list *entry)
{
- /*
- * Synchronize the IO-APIC and the CPU by doing
- * a dummy read from the IO-APIC
- */
struct io_apic __iomem *io_apic;
io_apic = io_apic_base(entry->apic);
@@ -445,11 +402,9 @@ static void io_apic_sync(struct irq_pin_list *entry)
static void mask_ioapic_irq(struct irq_data *irq_data)
{
struct mp_chip_data *data = irq_data->chip_data;
- unsigned long flags;
- raw_spin_lock_irqsave(&ioapic_lock, flags);
+ guard(raw_spinlock_irqsave)(&ioapic_lock);
io_apic_modify_irq(data, true, &io_apic_sync);
- raw_spin_unlock_irqrestore(&ioapic_lock, flags);
}
static void __unmask_ioapic(struct mp_chip_data *data)
@@ -460,11 +415,9 @@ static void __unmask_ioapic(struct mp_chip_data *data)
static void unmask_ioapic_irq(struct irq_data *irq_data)
{
struct mp_chip_data *data = irq_data->chip_data;
- unsigned long flags;
- raw_spin_lock_irqsave(&ioapic_lock, flags);
+ guard(raw_spinlock_irqsave)(&ioapic_lock);
__unmask_ioapic(data);
- raw_spin_unlock_irqrestore(&ioapic_lock, flags);
}
/*
@@ -492,30 +445,24 @@ static void __eoi_ioapic_pin(int apic, int pin, int vector)
entry = entry1 = __ioapic_read_entry(apic, pin);
- /*
- * Mask the entry and change the trigger mode to edge.
- */
+ /* Mask the entry and change the trigger mode to edge. */
entry1.masked = true;
entry1.is_level = false;
__ioapic_write_entry(apic, pin, entry1);
- /*
- * Restore the previous level triggered entry.
- */
+ /* Restore the previous level triggered entry. */
__ioapic_write_entry(apic, pin, entry);
}
}
static void eoi_ioapic_pin(int vector, struct mp_chip_data *data)
{
- unsigned long flags;
struct irq_pin_list *entry;
- raw_spin_lock_irqsave(&ioapic_lock, flags);
+ guard(raw_spinlock_irqsave)(&ioapic_lock);
for_each_irq_pin(entry, data->irq_2_pin)
__eoi_ioapic_pin(entry->apic, entry->pin, vector);
- raw_spin_unlock_irqrestore(&ioapic_lock, flags);
}
static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin)
@@ -538,8 +485,6 @@ static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin)
}
if (entry.irr) {
- unsigned long flags;
-
/*
* Make sure the trigger mode is set to level. Explicit EOI
* doesn't clear the remote-IRR if the trigger mode is not
@@ -549,9 +494,8 @@ static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin)
entry.is_level = true;
ioapic_write_entry(apic, pin, entry);
}
- raw_spin_lock_irqsave(&ioapic_lock, flags);
+ guard(raw_spinlock_irqsave)(&ioapic_lock);
__eoi_ioapic_pin(apic, pin, entry.vector);
- raw_spin_unlock_irqrestore(&ioapic_lock, flags);
}
/*
@@ -586,28 +530,23 @@ static int pirq_entries[MAX_PIRQS] = {
static int __init ioapic_pirq_setup(char *str)
{
- int i, max;
- int ints[MAX_PIRQS+1];
+ int i, max, ints[MAX_PIRQS+1];
get_options(str, ARRAY_SIZE(ints), ints);
- apic_printk(APIC_VERBOSE, KERN_INFO
- "PIRQ redirection, working around broken MP-BIOS.\n");
+ apic_pr_verbose("PIRQ redirection, working around broken MP-BIOS.\n");
+
max = MAX_PIRQS;
if (ints[0] < MAX_PIRQS)
max = ints[0];
for (i = 0; i < max; i++) {
- apic_printk(APIC_VERBOSE, KERN_DEBUG
- "... PIRQ%d -> IRQ %d\n", i, ints[i+1]);
- /*
- * PIRQs are mapped upside down, usually.
- */
+ apic_pr_verbose("... PIRQ%d -> IRQ %d\n", i, ints[i + 1]);
+ /* PIRQs are mapped upside down, usually */
pirq_entries[MAX_PIRQS-i-1] = ints[i+1];
}
return 1;
}
-
__setup("pirq=", ioapic_pirq_setup);
#endif /* CONFIG_X86_32 */
@@ -626,8 +565,7 @@ int save_ioapic_entries(void)
}
for_each_pin(apic, pin)
- ioapics[apic].saved_registers[pin] =
- ioapic_read_entry(apic, pin);
+ ioapics[apic].saved_registers[pin] = ioapic_read_entry(apic, pin);
}
return err;
@@ -668,8 +606,7 @@ int restore_ioapic_entries(void)
continue;
for_each_pin(apic, pin)
- ioapic_write_entry(apic, pin,
- ioapics[apic].saved_registers[pin]);
+ ioapic_write_entry(apic, pin, ioapics[apic].saved_registers[pin]);
}
return 0;
}
@@ -681,12 +618,13 @@ static int find_irq_entry(int ioapic_idx, int pin, int type)
{
int i;
- for (i = 0; i < mp_irq_entries; i++)
+ for (i = 0; i < mp_irq_entries; i++) {
if (mp_irqs[i].irqtype == type &&
(mp_irqs[i].dstapic == mpc_ioapic_id(ioapic_idx) ||
mp_irqs[i].dstapic == MP_APIC_ALL) &&
mp_irqs[i].dstirq == pin)
return i;
+ }
return -1;
}
@@ -701,10 +639,8 @@ static int __init find_isa_irq_pin(int irq, int type)
for (i = 0; i < mp_irq_entries; i++) {
int lbus = mp_irqs[i].srcbus;
- if (test_bit(lbus, mp_bus_not_pci) &&
- (mp_irqs[i].irqtype == type) &&
+ if (test_bit(lbus, mp_bus_not_pci) && (mp_irqs[i].irqtype == type) &&
(mp_irqs[i].srcbusirq == irq))
-
return mp_irqs[i].dstirq;
}
return -1;
@@ -717,8 +653,7 @@ static int __init find_isa_irq_apic(int irq, int type)
for (i = 0; i < mp_irq_entries; i++) {
int lbus = mp_irqs[i].srcbus;
- if (test_bit(lbus, mp_bus_not_pci) &&
- (mp_irqs[i].irqtype == type) &&
+ if (test_bit(lbus, mp_bus_not_pci) && (mp_irqs[i].irqtype == type) &&
(mp_irqs[i].srcbusirq == irq))
break;
}
@@ -726,9 +661,10 @@ static int __init find_isa_irq_apic(int irq, int type)
if (i < mp_irq_entries) {
int ioapic_idx;
- for_each_ioapic(ioapic_idx)
+ for_each_ioapic(ioapic_idx) {
if (mpc_ioapic_id(ioapic_idx) == mp_irqs[i].dstapic)
return ioapic_idx;
+ }
}
return -1;
@@ -769,8 +705,7 @@ static bool EISA_ELCR(unsigned int irq)
unsigned int port = PIC_ELCR1 + (irq >> 3);
return (inb(port) >> (irq & 7)) & 1;
}
- apic_printk(APIC_VERBOSE, KERN_INFO
- "Broken MPtable reports ISA irq %d\n", irq);
+ apic_pr_verbose("Broken MPtable reports ISA irq %d\n", irq);
return false;
}
@@ -947,9 +882,9 @@ static bool mp_check_pin_attr(int irq, struct irq_alloc_info *info)
static int alloc_irq_from_domain(struct irq_domain *domain, int ioapic, u32 gsi,
struct irq_alloc_info *info)
{
+ int type = ioapics[ioapic].irqdomain_cfg.type;
bool legacy = false;
int irq = -1;
- int type = ioapics[ioapic].irqdomain_cfg.type;
switch (type) {
case IOAPIC_DOMAIN_LEGACY:
@@ -971,8 +906,7 @@ static int alloc_irq_from_domain(struct irq_domain *domain, int ioapic, u32 gsi,
return -1;
}
- return __irq_domain_alloc_irqs(domain, irq, 1,
- ioapic_alloc_attr_node(info),
+ return __irq_domain_alloc_irqs(domain, irq, 1, ioapic_alloc_attr_node(info),
info, legacy, NULL);
}
@@ -986,13 +920,12 @@ static int alloc_irq_from_domain(struct irq_domain *domain, int ioapic, u32 gsi,
* PIRQs instead of reprogramming the interrupt routing logic. Thus there may be
* multiple pins sharing the same legacy IRQ number when ACPI is disabled.
*/
-static int alloc_isa_irq_from_domain(struct irq_domain *domain,
- int irq, int ioapic, int pin,
+static int alloc_isa_irq_from_domain(struct irq_domain *domain, int irq, int ioapic, int pin,
struct irq_alloc_info *info)
{
- struct mp_chip_data *data;
struct irq_data *irq_data = irq_get_irq_data(irq);
int node = ioapic_alloc_attr_node(info);
+ struct mp_chip_data *data;
/*
* Legacy ISA IRQ has already been allocated, just add pin to
@@ -1002,13 +935,11 @@ static int alloc_isa_irq_from_domain(struct irq_domain *domain,
if (irq_data && irq_data->parent_data) {
if (!mp_check_pin_attr(irq, info))
return -EBUSY;
- if (__add_pin_to_irq_node(irq_data->chip_data, node, ioapic,
- info->ioapic.pin))
+ if (!add_pin_to_irq_node(irq_data->chip_data, node, ioapic, info->ioapic.pin))
return -ENOMEM;
} else {
info->flags |= X86_IRQ_ALLOC_LEGACY;
- irq = __irq_domain_alloc_irqs(domain, irq, 1, node, info, true,
- NULL);
+ irq = __irq_domain_alloc_irqs(domain, irq, 1, node, info, true, NULL);
if (irq >= 0) {
irq_data = irq_domain_get_irq_data(domain, irq);
data = irq_data->chip_data;
@@ -1022,11 +953,11 @@ static int alloc_isa_irq_from_domain(struct irq_domain *domain,
static int mp_map_pin_to_irq(u32 gsi, int idx, int ioapic, int pin,
unsigned int flags, struct irq_alloc_info *info)
{
- int irq;
- bool legacy = false;
+ struct irq_domain *domain = mp_ioapic_irqdomain(ioapic);
struct irq_alloc_info tmp;
struct mp_chip_data *data;
- struct irq_domain *domain = mp_ioapic_irqdomain(ioapic);
+ bool legacy = false;
+ int irq;
if (!domain)
return -ENOSYS;
@@ -1046,7 +977,7 @@ static int mp_map_pin_to_irq(u32 gsi, int idx, int ioapic, int pin,
return -EINVAL;
}
- mutex_lock(&ioapic_mutex);
+ guard(mutex)(&ioapic_mutex);
if (!(flags & IOAPIC_MAP_ALLOC)) {
if (!legacy) {
irq = irq_find_mapping(domain, pin);
@@ -1067,8 +998,6 @@ static int mp_map_pin_to_irq(u32 gsi, int idx, int ioapic, int pin,
data->count++;
}
}
- mutex_unlock(&ioapic_mutex);
-
return irq;
}
@@ -1076,26 +1005,20 @@ static int pin_2_irq(int idx, int ioapic, int pin, unsigned int flags)
{
u32 gsi = mp_pin_to_gsi(ioapic, pin);
- /*
- * Debugging check, we are in big trouble if this message pops up!
- */
+ /* Debugging check, we are in big trouble if this message pops up! */
if (mp_irqs[idx].dstirq != pin)
pr_err("broken BIOS or MPTABLE parser, ayiee!!\n");
#ifdef CONFIG_X86_32
- /*
- * PCI IRQ command line redirection. Yes, limits are hardcoded.
- */
+ /* PCI IRQ command line redirection. Yes, limits are hardcoded. */
if ((pin >= 16) && (pin <= 23)) {
- if (pirq_entries[pin-16] != -1) {
- if (!pirq_entries[pin-16]) {
- apic_printk(APIC_VERBOSE, KERN_DEBUG
- "disabling PIRQ%d\n", pin-16);
+ if (pirq_entries[pin - 16] != -1) {
+ if (!pirq_entries[pin - 16]) {