diff options
54 files changed, 821 insertions, 143 deletions
diff --git a/Documentation/devicetree/bindings/display/ilitek,ili9341.txt b/Documentation/devicetree/bindings/display/ilitek,ili9341.txt deleted file mode 100644 index 169b32e4ee4e..000000000000 --- a/Documentation/devicetree/bindings/display/ilitek,ili9341.txt +++ /dev/null @@ -1,27 +0,0 @@ -Ilitek ILI9341 display panels - -This binding is for display panels using an Ilitek ILI9341 controller in SPI -mode. - -Required properties: -- compatible: "adafruit,yx240qv29", "ilitek,ili9341" -- dc-gpios: D/C pin -- reset-gpios: Reset pin - -The node for this driver must be a child node of a SPI controller, hence -all mandatory properties described in ../spi/spi-bus.txt must be specified. - -Optional properties: -- rotation: panel rotation in degrees counter clockwise (0,90,180,270) -- backlight: phandle of the backlight device attached to the panel - -Example: - display@0{ - compatible = "adafruit,yx240qv29", "ilitek,ili9341"; - reg = <0>; - spi-max-frequency = <32000000>; - dc-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; - rotation = <270>; - backlight = <&backlight>; - }; diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml index 6058948a9764..99e0cb9440cf 100644 --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml @@ -21,8 +21,10 @@ properties: compatible: items: - enum: + - adafruit,yx240qv29 # ili9341 240*320 Color on stm32f429-disco board - st,sf-tc240t-9370-t + - canaan,kd233-tft - const: ilitek,ili9341 reg: true @@ -47,31 +49,50 @@ properties: vddi-led-supply: description: Voltage supply for the LED driver (1.65 .. 3.3 V) -additionalProperties: false +unevaluatedProperties: false required: - compatible - reg - dc-gpios - - port + +if: + properties: + compatible: + contains: + enum: + - st,sf-tc240t-9370-t +then: + required: + - port examples: - |+ + #include <dt-bindings/gpio/gpio.h> spi { #address-cells = <1>; #size-cells = <0>; panel: display@0 { - compatible = "st,sf-tc240t-9370-t", - "ilitek,ili9341"; - reg = <0>; - spi-3wire; - spi-max-frequency = <10000000>; - dc-gpios = <&gpiod 13 0>; - port { - panel_in: endpoint { - remote-endpoint = <&display_out>; - }; - }; - }; + compatible = "st,sf-tc240t-9370-t", + "ilitek,ili9341"; + reg = <0>; + spi-3wire; + spi-max-frequency = <10000000>; + dc-gpios = <&gpiod 13 0>; + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; + display@1{ + compatible = "adafruit,yx240qv29", "ilitek,ili9341"; + reg = <1>; + spi-max-frequency = <10000000>; + dc-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; + rotation = <270>; + backlight = <&backlight>; }; + }; ... diff --git a/Documentation/devicetree/bindings/gpio/sifive,gpio.yaml b/Documentation/devicetree/bindings/gpio/sifive,gpio.yaml index 939e31c48081..fc095646adea 100644 --- a/Documentation/devicetree/bindings/gpio/sifive,gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/sifive,gpio.yaml @@ -46,6 +46,10 @@ properties: maximum: 32 default: 16 + gpio-line-names: + minItems: 1 + maxItems: 32 + gpio-controller: true required: diff --git a/Documentation/devicetree/bindings/memory-controllers/canaan,k210-sram.yaml b/Documentation/devicetree/bindings/memory-controllers/canaan,k210-sram.yaml new file mode 100644 index 000000000000..f81fb866e319 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/canaan,k210-sram.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/canaan,k210-sram.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Canaan K210 SRAM memory controller + +description: + The Canaan K210 SRAM memory controller is responsible for the system's 8 MiB + of SRAM. The controller is initialised by the bootloader, which configures + its clocks, before OS bringup. + +maintainers: + - Conor Dooley <conor@kernel.org> + +properties: + compatible: + enum: + - canaan,k210-sram + + clocks: + minItems: 1 + items: + - description: sram0 clock + - description: sram1 clock + - description: aisram clock + + clock-names: + minItems: 1 + items: + - const: sram0 + - const: sram1 + - const: aisram + +required: + - compatible + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/k210-clk.h> + memory-controller { + compatible = "canaan,k210-sram"; + clocks = <&sysclk K210_CLK_SRAM0>, + <&sysclk K210_CLK_SRAM1>, + <&sysclk K210_CLK_AI>; + clock-names = "sram0", "sram1", "aisram"; + }; diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml index d632ac76532e..873dd12f6e89 100644 --- a/Documentation/devicetree/bindings/riscv/cpus.yaml +++ b/Documentation/devicetree/bindings/riscv/cpus.yaml @@ -63,6 +63,11 @@ properties: - riscv,sv48 - riscv,none + riscv,cbom-block-size: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The blocksize in bytes for the Zicbom cache operations. + riscv,isa: description: Identifies the specific RISC-V instruction set architecture diff --git a/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml b/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml index e2d330bd4608..69cdab18d629 100644 --- a/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml +++ b/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml @@ -46,7 +46,7 @@ properties: const: 2 cache-sets: - const: 1024 + enum: [1024, 2048] cache-size: const: 2097152 @@ -84,6 +84,8 @@ then: description: | Must contain entries for DirError, DataError and DataFail signals. maxItems: 3 + cache-sets: + const: 1024 else: properties: @@ -91,6 +93,8 @@ else: description: | Must contain entries for DirError, DataError, DataFail, DirFail signals. minItems: 4 + cache-sets: + const: 2048 additionalProperties: false diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig index 5c52a82e83a8..ed66c31e4655 100644 --- a/arch/riscv/Kconfig +++ b/arch/riscv/Kconfig @@ -113,6 +113,7 @@ config RISCV select MODULES_USE_ELF_RELA if MODULES select MODULE_SECTIONS if MODULES select OF + select OF_DMA_DEFAULT_COHERENT select OF_EARLY_FLATTREE select OF_IRQ select PCI_DOMAINS_GENERIC if PCI @@ -218,6 +219,14 @@ config PGTABLE_LEVELS config LOCKDEP_SUPPORT def_bool y +config RISCV_DMA_NONCOHERENT + bool + select ARCH_HAS_DMA_PREP_COHERENT + select ARCH_HAS_SYNC_DMA_FOR_DEVICE + select ARCH_HAS_SYNC_DMA_FOR_CPU + select ARCH_HAS_SETUP_DMA_OPS + select DMA_DIRECT_REMAP + source "arch/riscv/Kconfig.socs" source "arch/riscv/Kconfig.erratas" @@ -392,6 +401,28 @@ config RISCV_ISA_SVPBMT If you don't know what to do here, say Y. +config CC_HAS_ZICBOM + bool + default y if 64BIT && $(cc-option,-mabi=lp64 -march=rv64ima_zicbom) + default y if 32BIT && $(cc-option,-mabi=ilp32 -march=rv32ima_zicbom) + +config RISCV_ISA_ZICBOM + bool "Zicbom extension support for non-coherent DMA operation" + depends on CC_HAS_ZICBOM + depends on !XIP_KERNEL && MMU + select RISCV_DMA_NONCOHERENT + select RISCV_ALTERNATIVE + default y + help + Adds support to dynamically detect the presence of the ZICBOM + extension (Cache Block Management Operations) and enable its + usage. + + The Zicbom extension can be used to handle for example + non-coherent DMA support on devices that need it. + + If you don't know what to do here, say Y. + config FPU bool "FPU support" default y @@ -463,7 +494,6 @@ config KEXEC_FILE config ARCH_HAS_KEXEC_PURGATORY def_bool KEXEC_FILE - select BUILD_BIN2C depends on CRYPTO=y depends on CRYPTO_SHA256=y diff --git a/arch/riscv/Kconfig.erratas b/arch/riscv/Kconfig.erratas index f62b62807e85..6850e9389930 100644 --- a/arch/riscv/Kconfig.erratas +++ b/arch/riscv/Kconfig.erratas @@ -55,4 +55,15 @@ config ERRATA_THEAD_PBMT If you don't know what to do here, say "Y". +config ERRATA_THEAD_CMO + bool "Apply T-Head cache management errata" + depends on ERRATA_THEAD + select RISCV_DMA_NONCOHERENT + default y + help + This will apply the cache management errata to handle the + non-standard handling on non-coherent operations on T-Head SoCs. + + If you don't know what to do here, say "Y". + endmenu # "CPU errata selection" diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile index 81029d40a672..3fa8ef336822 100644 --- a/arch/riscv/Makefile +++ b/arch/riscv/Makefile @@ -56,6 +56,14 @@ riscv-march-$(CONFIG_RISCV_ISA_C) := $(riscv-march-y)c toolchain-need-zicsr-zifencei := $(call cc-option-yn, -march=$(riscv-march-y)_zicsr_zifencei) riscv-march-$(toolchain-need-zicsr-zifencei) := $(riscv-march-y)_zicsr_zifencei +# Check if the toolchain supports Zicbom extension +toolchain-supports-zicbom := $(call cc-option-yn, -march=$(riscv-march-y)_zicbom) +riscv-march-$(toolchain-supports-zicbom) := $(riscv-march-y)_zicbom + +# Check if the toolchain supports Zihintpause extension +toolchain-supports-zihintpause := $(call cc-option-yn, -march=$(riscv-march-y)_zihintpause) +riscv-march-$(toolchain-supports-zihintpause) := $(riscv-march-y)_zihintpause + KBUILD_CFLAGS += -march=$(subst fd,,$(riscv-march-y)) KBUILD_AFLAGS += -march=$(riscv-march-y) diff --git a/arch/riscv/boot/dts/canaan/Makefile b/arch/riscv/boot/dts/canaan/Makefile index c61b08ac8554..befe4eb7527b 100644 --- a/arch/riscv/boot/dts/canaan/Makefile +++ b/arch/riscv/boot/dts/canaan/Makefile @@ -1,3 +1,9 @@ # SPDX-License-Identifier: GPL-2.0 -dtb-$(CONFIG_SOC_CANAAN_K210_DTB_BUILTIN) += $(addsuffix .dtb, $(CONFIG_SOC_CANAAN_K210_DTB_SOURCE)) -obj-$(CONFIG_SOC_CANAAN_K210_DTB_BUILTIN) += $(addsuffix .o, $(dtb-y)) +dtb-$(CONFIG_SOC_CANAAN) += canaan_kd233.dtb +dtb-$(CONFIG_SOC_CANAAN) += k210_generic.dtb +dtb-$(CONFIG_SOC_CANAAN) += sipeed_maix_bit.dtb +dtb-$(CONFIG_SOC_CANAAN) += sipeed_maix_dock.dtb +dtb-$(CONFIG_SOC_CANAAN) += sipeed_maix_go.dtb +dtb-$(CONFIG_SOC_CANAAN) += sipeed_maixduino.dtb + +obj-$(CONFIG_SOC_CANAAN_K210_DTB_BUILTIN) += $(addsuffix .dtb.o, $(CONFIG_SOC_CANAAN_K210_DTB_SOURCE)) diff --git a/arch/riscv/boot/dts/canaan/canaan_kd233.dts b/arch/riscv/boot/dts/canaan/canaan_kd233.dts index f72540bd14a3..8df4cf3656f2 100644 --- a/arch/riscv/boot/dts/canaan/canaan_kd233.dts +++ b/arch/riscv/boot/dts/canaan/canaan_kd233.dts @@ -127,10 +127,10 @@ cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>; panel@0 { - compatible = "ilitek,ili9341"; + compatible = "canaan,kd233-tft", "ilitek,ili9341"; reg = <0>; dc-gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>; - spi-max-frequency = <15000000>; + spi-max-frequency = <10000000>; status = "disabled"; }; }; @@ -142,7 +142,7 @@ cs-gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; status = "okay"; - slot@0 { + mmc@0 { compatible = "mmc-spi-slot"; reg = <0>; voltage-ranges = <3300 3300>; diff --git a/arch/riscv/boot/dts/canaan/k210.dtsi b/arch/riscv/boot/dts/canaan/k210.dtsi index ec944d1537dc..07e2e2649604 100644 --- a/arch/riscv/boot/dts/canaan/k210.dtsi +++ b/arch/riscv/boot/dts/canaan/k210.dtsi @@ -81,11 +81,13 @@ sram: memory@80000000 { device_type = "memory"; + reg = <0x80000000 0x400000>, /* sram0 4 MiB */ + <0x80400000 0x200000>, /* sram1 2 MiB */ + <0x80600000 0x200000>; /* aisram 2 MiB */ + }; + + sram_controller: memory-controller { compatible = "canaan,k210-sram"; - reg = <0x80000000 0x400000>, - <0x80400000 0x200000>, - <0x80600000 0x200000>; - reg-names = "sram0", "sram1", "aisram"; clocks = <&sysclk K210_CLK_SRAM0>, <&sysclk K210_CLK_SRAM1>, <&sysclk K210_CLK_AI>; @@ -173,7 +175,7 @@ #address-cells = <1>; #size-cells = <1>; compatible = "simple-pm-bus"; - ranges; + ranges = <0x50200000 0x50200000 0x200000>; clocks = <&sysclk K210_CLK_APB0>; gpio1: gpio@50200000 { @@ -261,7 +263,7 @@ }; i2s0: i2s@50250000 { - compatible = "snps,designware-i2s"; + compatible = "canaan,k210-i2s", "snps,designware-i2s"; reg = <0x50250000 0x200>; interrupts = <5>; clocks = <&sysclk K210_CLK_I2S0>; @@ -270,7 +272,7 @@ }; i2s1: i2s@50260000 { - compatible = "snps,designware-i2s"; + compatible = "canaan,k210-i2s", "snps,designware-i2s"; reg = <0x50260000 0x200>; interrupts = <6>; clocks = <&sysclk K210_CLK_I2S1>; @@ -279,7 +281,7 @@ }; i2s2: i2s@50270000 { - compatible = "snps,designware-i2s"; + compatible = "canaan,k210-i2s", "snps,designware-i2s"; reg = <0x50270000 0x200>; interrupts = <7>; clocks = <&sysclk K210_CLK_I2S2>; @@ -329,28 +331,58 @@ timer0: timer@502d0000 { compatible = "snps,dw-apb-timer"; - reg = <0x502D0000 0x100>; - interrupts = <14>, <15>; + reg = <0x502D0000 0x14>; + interrupts = <14>; clocks = <&sysclk K210_CLK_TIMER0>, <&sysclk K210_CLK_APB0>; clock-names = "timer", "pclk"; resets = <&sysrst K210_RST_TIMER0>; }; - timer1: timer@502e0000 { + timer1: timer@502d0014 { + compatible = "snps,dw-apb-timer"; + reg = <0x502D0014 0x14>; + interrupts = <15>; + clocks = <&sysclk K210_CLK_TIMER0>, + <&sysclk K210_CLK_APB0>; + clock-names = "timer", "pclk"; + resets = <&sysrst K210_RST_TIMER0>; + }; + + timer2: timer@502e0000 { + compatible = "snps,dw-apb-timer"; + reg = <0x502E0000 0x14>; + interrupts = <16>; + clocks = <&sysclk K210_CLK_TIMER1>, + <&sysclk K210_CLK_APB0>; + clock-names = "timer", "pclk"; + resets = <&sysrst K210_RST_TIMER1>; + }; + + timer3: timer@502e0014 { compatible = "snps,dw-apb-timer"; - reg = <0x502E0000 0x100>; - interrupts = <16>, <17>; + reg = <0x502E0014 0x114>; + interrupts = <17>; clocks = <&sysclk K210_CLK_TIMER1>, <&sysclk K210_CLK_APB0>; clock-names = "timer", "pclk"; resets = <&sysrst K210_RST_TIMER1>; }; - timer2: timer@502f0000 { + timer4: timer@502f0000 { compatible = "snps,dw-apb-timer"; - reg = <0x502F0000 0x100>; - interrupts = <18>, <19>; + reg = <0x502F0000 0x14>; + interrupts = <18>; + clocks = <&sysclk K210_CLK_TIMER2>, + <&sysclk K210_CLK_APB0>; + clock-names = "timer", "pclk"; + resets = <&sysrst K210_RST_TIMER2>; + }; + + timer5: timer@502f0014 { + compatible = "snps,dw-apb-timer"; + reg = <0x502F0014 0x14>; + interrupts = <19>; clocks = <&sysclk K210_CLK_TIMER2>, <&sysclk K210_CLK_APB0>; clock-names = "timer", "pclk"; @@ -362,7 +394,7 @@ #address-cells = <1>; #size-cells = <1>; compatible = "simple-pm-bus"; - ranges; + ranges = <0x50400000 0x50400000 0x40100>; clocks = <&sysclk K210_CLK_APB1>; wdt0: watchdog@50400000 { @@ -417,7 +449,7 @@ #address-cells = <1>; #size-cells = <1>; compatible = "simple-pm-bus"; - ranges; + ranges = <0x52000000 0x52000000 0x2000200>; clocks = <&sysclk K210_CLK_APB2>; spi0: spi@52000000 { @@ -431,7 +463,6 @@ clock-names = "ssi_clk", "pclk"; resets = <&sysrst K210_RST_SPI0>; reset-names = "spi"; - spi-max-frequency = <25000000>; num-cs = <4>; reg-io-width = <4>; }; @@ -447,7 +478,6 @@ clock-names = "ssi_clk", "pclk"; resets = <&sysrst K210_RST_SPI1>; reset-names = "spi"; - spi-max-frequency = <25000000>; num-cs = <4>; reg-io-width = <4>; }; @@ -463,8 +493,7 @@ clock-names = "ssi_clk", "pclk"; resets = <&sysrst K210_RST_SPI3>; reset-names = "spi"; - /* Could possibly go up to 200 MHz */ - spi-max-frequency = <100000000>; + num-cs = <4>; reg-io-width = <4>; }; diff --git a/arch/riscv/boot/dts/canaan/sipeed_maix_bit.dts b/arch/riscv/boot/dts/canaan/sipeed_maix_bit.dts index 8abdbe26a1d0..6d25bf07481a 100644 --- a/arch/riscv/boot/dts/canaan/sipeed_maix_bit.dts +++ b/arch/riscv/boot/dts/canaan/sipeed_maix_bit.dts @@ -189,7 +189,7 @@ cs-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; status = "okay"; - slot@0 { + mmc@0 { compatible = "mmc-spi-slot"; reg = <0>; voltage-ranges = <3300 3300>; diff --git a/arch/riscv/boot/dts/canaan/sipeed_maix_dock.dts b/arch/riscv/boot/dts/canaan/sipeed_maix_dock.dts index 3c6df1ecf76f..f4f4d8d5e8b8 100644 --- a/arch/riscv/boot/dts/canaan/sipeed_maix_dock.dts +++ b/arch/riscv/boot/dts/canaan/sipeed_maix_dock.dts @@ -191,7 +191,7 @@ cs-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; status = "okay"; - slot@0 { + mmc@0 { compatible = "mmc-spi-slot"; reg = <0>; voltage-ranges = <3300 3300>; diff --git a/arch/riscv/boot/dts/canaan/sipeed_maix_go.dts b/arch/riscv/boot/dts/canaan/sipeed_maix_go.dts index 03c9843d503e..0d86df47e1ed 100644 --- a/arch/riscv/boot/dts/canaan/sipeed_maix_go.dts +++ b/arch/riscv/boot/dts/canaan/sipeed_maix_go.dts @@ -199,7 +199,7 @@ cs-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; status = "okay"; - slot@0 { + mmc@0 { compatible = "mmc-spi-slot"; reg = <0>; voltage-ranges = <3300 3300>; diff --git a/arch/riscv/boot/dts/canaan/sipeed_maixduino.dts b/arch/riscv/boot/dts/canaan/sipeed_maixduino.dts index 7164ad063178..5c05c498e2b8 100644 --- a/arch/riscv/boot/dts/canaan/sipeed_maixduino.dts +++ b/arch/riscv/boot/dts/canaan/sipeed_maixduino.dts @@ -164,7 +164,7 @@ cs-gpios = <&gpio1_0 2 GPIO_ACTIVE_LOW>; status = "okay"; - slot@0 { + mmc@0 { compatible = "mmc-spi-slot"; reg = <0>; voltage-ranges = <3300 3300>; diff --git a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts index 1f386b07a832..07387f9c135c 100644 --- a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts +++ b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts @@ -4,6 +4,8 @@ #include "fu740-c000.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pwm/pwm.h> /* Clock frequency (in Hz) of the PCB crystal for rtcclk */ #define RTCCLK_FREQ 1000000 @@ -44,6 +46,46 @@ compatible = "gpio-poweroff"; gpios = <&gpio 2 GPIO_ACTIVE_LOW>; }; + + led-controller-1 { + compatible = "pwm-leds"; |