diff options
56 files changed, 1115 insertions, 399 deletions
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index b858c8288196..1f35bd1ef563 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -4838,7 +4838,6 @@ int ath10k_mac_register(struct ath10k *ar) IEEE80211_HW_MFP_CAPABLE | IEEE80211_HW_REPORTS_TX_ACK_STATUS | IEEE80211_HW_HAS_RATE_CONTROL | - IEEE80211_HW_SUPPORTS_STATIC_SMPS | IEEE80211_HW_AP_LINK_PS | IEEE80211_HW_SPECTRUM_MGMT; @@ -4846,8 +4845,10 @@ int ath10k_mac_register(struct ath10k *ar) * bytes is used for padding/alignment if necessary. */ ar->hw->extra_tx_headroom += sizeof(struct htt_data_tx_desc_frag)*2 + 4; + ar->hw->wiphy->features |= NL80211_FEATURE_STATIC_SMPS; + if (ar->ht_cap_info & WMI_HT_CAP_DYNAMIC_SMPS) - ar->hw->flags |= IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS; + ar->hw->wiphy->features |= NL80211_FEATURE_DYNAMIC_SMPS; if (ar->ht_cap_info & WMI_HT_CAP_ENABLED) { ar->hw->flags |= IEEE80211_HW_AMPDU_AGGREGATION; diff --git a/drivers/net/wireless/ath/ath5k/mac80211-ops.c b/drivers/net/wireless/ath/ath5k/mac80211-ops.c index b65c38fdaa4b..ab2709a43768 100644 --- a/drivers/net/wireless/ath/ath5k/mac80211-ops.c +++ b/drivers/net/wireless/ath/ath5k/mac80211-ops.c @@ -704,7 +704,7 @@ ath5k_get_survey(struct ieee80211_hw *hw, int idx, struct survey_info *survey) * reset. */ static void -ath5k_set_coverage_class(struct ieee80211_hw *hw, u8 coverage_class) +ath5k_set_coverage_class(struct ieee80211_hw *hw, s16 coverage_class) { struct ath5k_hw *ah = hw->priv; diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c index 5627917c5ff7..994fff1ff519 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c @@ -1722,7 +1722,7 @@ static int ath9k_htc_set_rts_threshold(struct ieee80211_hw *hw, u32 value) } static void ath9k_htc_set_coverage_class(struct ieee80211_hw *hw, - u8 coverage_class) + s16 coverage_class) { struct ath9k_htc_priv *priv = hw->priv; diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 1bc23697495b..a556c29f888a 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1860,7 +1860,8 @@ static int ath9k_get_survey(struct ieee80211_hw *hw, int idx, return 0; } -static void ath9k_set_coverage_class(struct ieee80211_hw *hw, u8 coverage_class) +static void ath9k_set_coverage_class(struct ieee80211_hw *hw, + s16 coverage_class) { struct ath_softc *sc = hw->priv; struct ath_hw *ah = sc->sc_ah; diff --git a/drivers/net/wireless/iwlegacy/4965-mac.c b/drivers/net/wireless/iwlegacy/4965-mac.c index cf7996f4321c..26fec54dcd03 100644 --- a/drivers/net/wireless/iwlegacy/4965-mac.c +++ b/drivers/net/wireless/iwlegacy/4965-mac.c @@ -5757,9 +5757,8 @@ il4965_mac_setup_register(struct il_priv *il, u32 max_probe_length) IEEE80211_HW_REPORTS_TX_ACK_STATUS | IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_SUPPORTS_DYNAMIC_PS; if (il->cfg->sku & IL_SKU_N) - hw->flags |= - IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS | - IEEE80211_HW_SUPPORTS_STATIC_SMPS; + hw->wiphy->features |= NL80211_FEATURE_DYNAMIC_SMPS | + NL80211_FEATURE_STATIC_SMPS; hw->sta_data_size = sizeof(struct il_station_priv); hw->vif_data_size = sizeof(struct il_vif_priv); diff --git a/drivers/net/wireless/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/iwlwifi/dvm/mac80211.c index afb98f4fdaf3..2364a3c09b9e 100644 --- a/drivers/net/wireless/iwlwifi/dvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/dvm/mac80211.c @@ -125,8 +125,8 @@ int iwlagn_mac_setup_register(struct iwl_priv *priv, */ if (priv->nvm_data->sku_cap_11n_enable) - hw->flags |= IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS | - IEEE80211_HW_SUPPORTS_STATIC_SMPS; + hw->wiphy->features |= NL80211_FEATURE_DYNAMIC_SMPS | + NL80211_FEATURE_STATIC_SMPS; /* * Enable 11w if advertised by firmware and software crypto diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index 2517f87a4453..4c2121094a0b 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -303,9 +303,7 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm) IEEE80211_HW_AMPDU_AGGREGATION | IEEE80211_HW_TIMING_BEACON_ONLY | IEEE80211_HW_CONNECTION_MONITOR | - IEEE80211_HW_CHANCTX_STA_CSA | - IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS | - IEEE80211_HW_SUPPORTS_STATIC_SMPS; + IEEE80211_HW_CHANCTX_STA_CSA; hw->queues = mvm->first_agg_queue; hw->offchannel_tx_hw_queue = IWL_MVM_OFFCHANNEL_QUEUE; @@ -409,7 +407,9 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm) hw->wiphy->features |= NL80211_FEATURE_P2P_GO_CTWIN | NL80211_FEATURE_LOW_PRIORITY_SCAN | - NL80211_FEATURE_P2P_GO_OPPPS; + NL80211_FEATURE_P2P_GO_OPPPS | + NL80211_FEATURE_DYNAMIC_SMPS | + NL80211_FEATURE_STATIC_SMPS; mvm->rts_threshold = IEEE80211_MAX_RTS_THRESHOLD; diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index 1326f6121835..babbdc1ce741 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -2045,8 +2045,6 @@ static int mac80211_hwsim_create_radio(int channels, const char *reg_alpha2, hw->flags = IEEE80211_HW_MFP_CAPABLE | IEEE80211_HW_SIGNAL_DBM | - IEEE80211_HW_SUPPORTS_STATIC_SMPS | - IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS | IEEE80211_HW_AMPDU_AGGREGATION | IEEE80211_HW_WANT_MONITOR_VIF | IEEE80211_HW_QUEUE_CONTROL | @@ -2059,8 +2057,10 @@ static int mac80211_hwsim_create_radio(int channels, const char *reg_alpha2, WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL | WIPHY_FLAG_AP_UAPSD | WIPHY_FLAG_HAS_CHANNEL_SWITCH; - hw->wiphy->features |= NL80211_FEATURE_ACTIVE_MONITOR; - hw->wiphy->features |= NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE; + hw->wiphy->features |= NL80211_FEATURE_ACTIVE_MONITOR | + NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE | + NL80211_FEATURE_STATIC_SMPS | + NL80211_FEATURE_DYNAMIC_SMPS; /* ask mac80211 to reserve space for magic */ hw->vif_data_size = sizeof(struct hwsim_vif_priv); diff --git a/drivers/net/wireless/p54/main.c b/drivers/net/wireless/p54/main.c index 7be3a4839640..97aeff0edb84 100644 --- a/drivers/net/wireless/p54/main.c +++ b/drivers/net/wireless/p54/main.c @@ -696,7 +696,8 @@ static void p54_flush(struct ieee80211_hw *dev, struct ieee80211_vif *vif, WARN(total, "tx flush timeout, unresponsive firmware"); } -static void p54_set_coverage_class(struct ieee80211_hw *dev, u8 coverage_class) +static void p54_set_coverage_class(struct ieee80211_hw *dev, + s16 coverage_class) { struct p54_common *priv = dev->priv; diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 8018c915ee63..b1be39c76931 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -6,6 +6,7 @@ * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi> * Copyright (c) 2005, Devicescape Software, Inc. * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net> + * Copyright (c) 2013 - 2014 Intel Mobile Communications GmbH * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -165,8 +166,12 @@ static inline u16 ieee80211_sn_sub(u16 sn1, u16 sn2) #define IEEE80211_MAX_MESH_ID_LEN 32 +#define IEEE80211_FIRST_TSPEC_TSID 8 #define IEEE80211_NUM_TIDS 16 +/* number of user priorities 802.11 uses */ +#define IEEE80211_NUM_UPS 8 + #define IEEE80211_QOS_CTL_LEN 2 /* 1d tag mask */ #define IEEE80211_QOS_CTL_TAG1D_MASK 0x0007 @@ -1823,7 +1828,8 @@ enum ieee80211_eid { WLAN_EID_DMG_TSPEC = 146, WLAN_EID_DMG_AT = 147, WLAN_EID_DMG_CAP = 148, - /* 149-150 reserved for Cisco */ + /* 149 reserved for Cisco */ + WLAN_EID_CISCO_VENDOR_SPECIFIC = 150, WLAN_EID_DMG_OPERATION = 151, WLAN_EID_DMG_BSS_PARAM_CHANGE = 152, WLAN_EID_DMG_BEAM_REFINEMENT = 153, diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index ab21299c8f4d..a2ddcf2398fd 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -4,6 +4,7 @@ * 802.11 device and configuration interface * * Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net> + * Copyright 2013-2014 Intel Mobile Communications GmbH * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -663,6 +664,7 @@ struct cfg80211_acl_data { * @crypto: crypto settings * @privacy: the BSS uses privacy * @auth_type: Authentication type (algorithm) + * @smps_mode: SMPS mode * @inactivity_timeout: time in seconds to determine station's inactivity. * @p2p_ctwindow: P2P CT Window * @p2p_opp_ps: P2P opportunistic PS @@ -681,6 +683,7 @@ struct cfg80211_ap_settings { struct cfg80211_crypto_settings crypto; bool privacy; enum nl80211_auth_type auth_type; + enum nl80211_smps_mode smps_mode; int inactivity_timeout; u8 p2p_ctwindow; bool p2p_opp_ps; @@ -1607,10 +1610,12 @@ struct cfg80211_auth_request { * * @ASSOC_REQ_DISABLE_HT: Disable HT (802.11n) * @ASSOC_REQ_DISABLE_VHT: Disable VHT + * @ASSOC_REQ_USE_RRM: Declare RRM capability in this association */ enum cfg80211_assoc_req_flags { ASSOC_REQ_DISABLE_HT = BIT(0), ASSOC_REQ_DISABLE_VHT = BIT(1), + ASSOC_REQ_USE_RRM = BIT(2), }; /** @@ -1802,6 +1807,7 @@ struct cfg80211_connect_params { * @WIPHY_PARAM_FRAG_THRESHOLD: wiphy->frag_threshold has changed * @WIPHY_PARAM_RTS_THRESHOLD: wiphy->rts_threshold has changed * @WIPHY_PARAM_COVERAGE_CLASS: coverage class changed + * @WIPHY_PARAM_DYN_ACK: dynack has been enabled */ enum wiphy_params_flags { WIPHY_PARAM_RETRY_SHORT = 1 << 0, @@ -1809,6 +1815,7 @@ enum wiphy_params_flags { WIPHY_PARAM_FRAG_THRESHOLD = 1 << 2, WIPHY_PARAM_RTS_THRESHOLD = 1 << 3, WIPHY_PARAM_COVERAGE_CLASS = 1 << 4, + WIPHY_PARAM_DYN_ACK = 1 << 5, }; /* @@ -1975,14 +1982,12 @@ struct cfg80211_wowlan_wakeup { /** * struct cfg80211_gtk_rekey_data - rekey data - * @kek: key encryption key - * @kck: key confirmation key - * @replay_ctr: replay counter + * @kek: key encryption key (NL80211_KEK_LEN bytes) + * @kck: key confirmation key (NL80211_KCK_LEN bytes) + * @replay_ctr: replay counter (NL80211_REPLAY_CTR_LEN bytes) */ struct cfg80211_gtk_rekey_data { - u8 kek[NL80211_KEK_LEN]; - u8 kck[NL80211_KCK_LEN]; - u8 replay_ctr[NL80211_REPLAY_CTR_LEN]; + const u8 *kek, *kck, *replay_ctr; }; /** @@ -2315,6 +2320,17 @@ struct cfg80211_qos_map { * @set_ap_chanwidth: Set the AP (including P2P GO) mode channel width for the * given interface This is used e.g. for dynamic HT 20/40 MHz channel width * changes during the lifetime of the BSS. + * + * @add_tx_ts: validate (if admitted_time is 0) or add a TX TS to the device + * with the given parameters; action frame exchange has been handled by + * userspace so this just has to modify the TX path to take the TS into + * account. + * If the admitted time is 0 just validate the parameters to make sure + * the session can be created at all; it is valid to just always return + * success for that but that may result in inefficient behaviour (handshake + * with the peer followed by immediate teardown when the addition is later + * rejected) + * @del_tx_ts: remove an existing TX TS */ struct cfg80211_ops { int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow); @@ -2555,6 +2571,12 @@ struct cfg80211_ops { int (*set_ap_chanwidth)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_chan_def *chandef); + + int (*add_tx_ts)(struct wiphy *wiphy, struct net_device *dev, + u8 tsid, const u8 *peer, u8 user_prio, + u16 admitted_time); + int (*del_tx_ts)(struct wiphy *wiphy, struct net_device *dev, + u8 tsid, const u8 *peer); }; /* @@ -2601,9 +2623,13 @@ struct cfg80211_ops { * @WIPHY_FLAG_SUPPORTS_5_10_MHZ: Device supports 5 MHz and 10 MHz channels. * @WIPHY_FLAG_HAS_CHANNEL_SWITCH: Device supports channel switch in * beaconing mode (AP, IBSS, Mesh, ...). + * @WIPHY_FLAG_SUPPORTS_WMM_ADMISSION: the device supports setting up WMM + * TSPEC sessions (TID aka TSID 0-7) with the NL80211_CMD_ADD_TX_TS + * command. Standard IEEE 802.11 TSPEC setup is not yet supported, it + * needs to be able to handle Block-Ack agreements and other things. */ enum wiphy_flags { - /* use hole at 0 */ + WIPHY_FLAG_SUPPORTS_WMM_ADMISSION = BIT(0), /* use hole at 1 */ /* use hole at 2 */ WIPHY_FLAG_NETNS_OK = BIT(3), @@ -3920,6 +3946,7 @@ void cfg80211_auth_timeout(struct net_device *dev, const u8 *addr); * moves to cfg80211 in this call * @buf: authentication frame (header + body) * @len: length of the frame data + * @uapsd_queues: bitmap of ACs configured to uapsd. -1 if n/a. * * After being asked to associate via cfg80211_ops::assoc() the driver must * call either this function or cfg80211_auth_timeout(). @@ -3928,7 +3955,8 @@ void cfg80211_auth_timeout(struct net_device *dev, const u8 *addr); */ void cfg80211_rx_assoc_resp(struct net_device *dev, struct cfg80211_bss *bss, - const u8 *buf, size_t len); + const u8 *buf, size_t len, + int uapsd_queues); /** * cfg80211_assoc_timeout - notification of timed out association diff --git a/include/net/mac80211.h b/include/net/mac80211.h index c9b2bec8db47..0ad1f47d2dc7 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -4,6 +4,7 @@ * Copyright 2002-2005, Devicescape Software, Inc. * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz> * Copyright 2007-2010 Johannes Berg <johannes@sipsolutions.net> + * Copyright 2013-2014 Intel Mobile Communications GmbH * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -1536,16 +1537,6 @@ struct ieee80211_tx_control { * @IEEE80211_HW_MFP_CAPABLE: * Hardware supports management frame protection (MFP, IEEE 802.11w). * - * @IEEE80211_HW_SUPPORTS_STATIC_SMPS: - * Hardware supports static spatial multiplexing powersave, - * ie. can turn off all but one chain even on HT connections - * that should be using more chains. - * - * @IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS: - * Hardware supports dynamic spatial multiplexing powersave, - * ie. can turn off all but one chain and then wake the rest - * up as required after, for example, rts/cts handshake. - * * @IEEE80211_HW_SUPPORTS_UAPSD: * Hardware supports Unscheduled Automatic Power Save Delivery * (U-APSD) in managed mode. The mode is configured with @@ -1631,8 +1622,7 @@ enum ieee80211_hw_flags { IEEE80211_HW_SUPPORTS_DYNAMIC_PS = 1<<12, IEEE80211_HW_MFP_CAPABLE = 1<<13, IEEE80211_HW_WANT_MONITOR_VIF = 1<<14, - IEEE80211_HW_SUPPORTS_STATIC_SMPS = 1<<15, - IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS = 1<<16, + /* free slots */ IEEE80211_HW_SUPPORTS_UAPSD = 1<<17, IEEE80211_HW_REPORTS_TX_ACK_STATUS = 1<<18, IEEE80211_HW_CONNECTION_MONITOR = 1<<19, @@ -2672,7 +2662,9 @@ enum ieee80211_roc_type { * * @set_coverage_class: Set slot time for given coverage class as specified * in IEEE 802.11-2007 section 17.3.8.6 and modify ACK timeout - * accordingly. This callback is not required and may sleep. + * accordingly; coverage class equals to -1 to enable ACK timeout + * estimation algorithm (dynack). To disable dynack set valid value for + * coverage class. This callback is not required and may sleep. * * @testmode_cmd: Implement a cfg80211 test mode command. The passed @vif may * be %NULL. The callback can sleep. @@ -2956,7 +2948,7 @@ struct ieee80211_ops { int (*get_survey)(struct ieee80211_hw *hw, int idx, struct survey_info *survey); void (*rfkill_poll)(struct ieee80211_hw *hw); - void (*set_coverage_class)(struct ieee80211_hw *hw, u8 coverage_class); + void (*set_coverage_class)(struct ieee80211_hw *hw, s16 coverage_class); #ifdef CONFIG_NL80211_TESTMODE int (*testmode_cmd)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, void *data, int len); diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index d097568da690..4b28dc07bcb1 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -722,6 +722,22 @@ * QoS mapping is relevant for IP packets, it is only valid during an * association. This is cleared on disassociation and AP restart. * + * @NL80211_CMD_ADD_TX_TS: Ask the kernel to add a traffic stream for the given + * %NL80211_ATTR_TSID and %NL80211_ATTR_MAC with %NL80211_ATTR_USER_PRIO + * and %NL80211_ATTR_ADMITTED_TIME parameters. + * Note that the action frame handshake with the AP shall be handled by + * userspace via the normal management RX/TX framework, this only sets + * up the TX TS in the driver/device. + * If the admitted time attribute is not added then the request just checks + * if a subsequent setup could be successful, the intent is to use this to + * avoid setting up a session with the AP when local restrictions would + * make that impossible. However, the subsequent "real" setup may still + * fail even if the check was successful. + * @NL80211_CMD_DEL_TX_TS: Remove an existing TS with the %NL80211_ATTR_TSID + * and %NL80211_ATTR_MAC parameters. It isn't necessary to call this + * before removing a station entry entirely, or before disassociating + * or similar, cleanup will happen in the driver/device in this case. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -893,6 +909,9 @@ enum nl80211_commands { NL80211_CMD_SET_QOS_MAP, + NL80211_CMD_ADD_TX_TS, + NL80211_CMD_DEL_TX_TS, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -1594,6 +1613,31 @@ enum nl80211_commands { * @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is * the TDLS link initiator. * + * @NL80211_ATTR_USE_RRM: flag for indicating whether the current connection + * shall support Radio Resource Measurements (11k). This attribute can be + * used with %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests. + * User space applications are expected to use this flag only if the + * underlying device supports these minimal RRM features: + * %NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES, + * %NL80211_FEATURE_QUIET, + * If this flag is used, driver must add the Power Capabilities IE to the + * association request. In addition, it must also set the RRM capability + * flag in the association request's Capability Info field. + * + * @NL80211_ATTR_WIPHY_DYN_ACK: flag attribute used to enable ACK timeout + * estimation algorithm (dynack). In order to activate dynack + * %NL80211_FEATURE_ACKTO_ESTIMATION feature flag must be set by lower + * drivers to indicate dynack capability. Dynack is automatically disabled + * setting valid value for coverage class. + * + * @NL80211_ATTR_TSID: a TSID value (u8 attribute) + * @NL80211_ATTR_USER_PRIO: user priority value (u8 attribute) + * @NL80211_ATTR_ADMITTED_TIME: admitted time in units of 32 microseconds + * (per second) (u16 attribute) + * + * @NL80211_ATTR_SMPS_MODE: SMPS mode to use (ap mode). see + * &enum nl80211_smps_mode. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1936,6 +1980,16 @@ enum nl80211_attrs { NL80211_ATTR_TDLS_INITIATOR, + NL80211_ATTR_USE_RRM, + + NL80211_ATTR_WIPHY_DYN_ACK, + + NL80211_ATTR_TSID, + NL80211_ATTR_USER_PRIO, + NL80211_ATTR_ADMITTED_TIME, + + NL80211_ATTR_SMPS_MODE, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -3968,6 +4022,26 @@ enum nl80211_ap_sme_features { * @NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE: This driver supports dynamic * channel bandwidth change (e.g., HT 20 <-> 40 MHz channel) during the * lifetime of a BSS. + * @NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES: This device adds a DS Parameter + * Set IE to probe requests. + * @NL80211_FEATURE_WFA_TPC_IE_IN_PROBES: This device adds a WFA TPC Report IE + * to probe requests. + * @NL80211_FEATURE_QUIET: This device, in client mode, supports Quiet Period + * requests sent to it by an AP. + * @NL80211_FEATURE_TX_POWER_INSERTION: This device is capable of inserting the + * current tx power value into the TPC Report IE in the spectrum + * management TPC Report action frame, and in the Radio Measurement Link + * Measurement Report action frame. + * @NL80211_FEATURE_ACKTO_ESTIMATION: This driver supports dynamic ACK timeout + * estimation (dynack). %NL80211_ATTR_WIPHY_DYN_ACK flag attribute is used + * to enable dynack. + * @NL80211_FEATURE_STATIC_SMPS: Device supports static spatial + * multiplexing powersave, ie. can turn off all but one chain + * even on HT connections that should be using more chains. + * @NL80211_FEATURE_DYNAMIC_SMPS: Device supports dynamic spatial + * multiplexing powersave, ie. can turn off all but one chain + * and then wake the rest up as required after, for example, + * rts/cts handshake. */ enum nl80211_feature_flags { NL80211_FEATURE_SK_TX_STATUS = 1 << 0, @@ -3989,6 +4063,13 @@ enum nl80211_feature_flags { NL80211_FEATURE_USERSPACE_MPM = 1 << 16, NL80211_FEATURE_ACTIVE_MONITOR = 1 << 17, NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE = 1 << 18, + NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES = 1 << 19, + NL80211_FEATURE_WFA_TPC_IE_IN_PROBES = 1 << 20, + NL80211_FEATURE_QUIET = 1 << 21, + NL80211_FEATURE_TX_POWER_INSERTION = 1 << 22, + NL80211_FEATURE_ACKTO_ESTIMATION = 1 << 23, + NL80211_FEATURE_STATIC_SMPS = 1 << 24, + NL80211_FEATURE_DYNAMIC_SMPS = 1 << 25, }; /** @@ -4063,6 +4144,25 @@ enum nl80211_acl_policy { }; /** + * enum nl80211_smps_mode - SMPS mode + * + * Requested SMPS mode (for AP mode) + * + * @NL80211_SMPS_OFF: SMPS off (use all antennas). + * @NL80211_SMPS_STATIC: static SMPS (use a single antenna) + * @NL80211_SMPS_DYNAMIC: dynamic smps (start with a single antenna and + * turn on other antennas after CTS/RTS). + */ +enum nl80211_smps_mode { + NL80211_SMPS_OFF, + NL80211_SMPS_STATIC, + NL80211_SMPS_DYNAMIC, + + __NL80211_SMPS_AFTER_LAST, |