diff options
| -rw-r--r-- | drivers/net/wan/cycx_drv.c | 569 | ||||
| -rw-r--r-- | drivers/net/wan/cycx_main.c | 346 | ||||
| -rw-r--r-- | drivers/net/wan/cycx_x25.c | 1602 | ||||
| -rw-r--r-- | include/linux/cyclomx.h | 77 | ||||
| -rw-r--r-- | include/linux/cycx_drv.h | 64 | ||||
| -rw-r--r-- | include/linux/wanrouter.h | 127 | ||||
| -rw-r--r-- | include/uapi/linux/wanrouter.h | 443 | ||||
| -rw-r--r-- | net/wanrouter/Kconfig | 27 | ||||
| -rw-r--r-- | net/wanrouter/Makefile | 7 | ||||
| -rw-r--r-- | net/wanrouter/patchlevel | 1 | ||||
| -rw-r--r-- | net/wanrouter/wanmain.c | 782 | ||||
| -rw-r--r-- | net/wanrouter/wanproc.c | 380 |
12 files changed, 8 insertions, 4417 deletions
diff --git a/drivers/net/wan/cycx_drv.c b/drivers/net/wan/cycx_drv.c deleted file mode 100644 index 2a3ecae67a90..000000000000 --- a/drivers/net/wan/cycx_drv.c +++ /dev/null @@ -1,569 +0,0 @@ -/* -* cycx_drv.c Cyclom 2X Support Module. -* -* This module is a library of common hardware specific -* functions used by the Cyclades Cyclom 2X sync card. -* -* Author: Arnaldo Carvalho de Melo <acme@conectiva.com.br> -* -* Copyright: (c) 1998-2003 Arnaldo Carvalho de Melo -* -* Based on sdladrv.c by Gene Kozin <genek@compuserve.com> -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License -* as published by the Free Software Foundation; either version -* 2 of the License, or (at your option) any later version. -* ============================================================================ -* 1999/11/11 acme set_current_state(TASK_INTERRUPTIBLE), code -* cleanup -* 1999/11/08 acme init_cyc2x deleted, doing nothing -* 1999/11/06 acme back to read[bw], write[bw] and memcpy_to and -* fromio to use dpmbase ioremaped -* 1999/10/26 acme use isa_read[bw], isa_write[bw] & isa_memcpy_to -* & fromio -* 1999/10/23 acme cleanup to only supports cyclom2x: all the other -* boards are no longer manufactured by cyclades, -* if someone wants to support them... be my guest! -* 1999/05/28 acme cycx_intack & cycx_intde gone for good -* 1999/05/18 acme lots of unlogged work, submitting to Linus... -* 1999/01/03 acme more judicious use of data types -* 1999/01/03 acme judicious use of data types :> -* cycx_inten trying to reset pending interrupts -* from cyclom 2x - I think this isn't the way to -* go, but for now... -* 1999/01/02 acme cycx_intack ok, I think there's nothing to do -* to ack an int in cycx_drv.c, only handle it in -* cyx_isr (or in the other protocols: cyp_isr, -* cyf_isr, when they get implemented. -* Dec 31, 1998 acme cycx_data_boot & cycx_code_boot fixed, crossing -* fingers to see x25_configure in cycx_x25.c -* work... :) -* Dec 26, 1998 acme load implementation fixed, seems to work! :) -* cycx_2x_dpmbase_options with all the possible -* DPM addresses (20). -* cycx_intr implemented (test this!) -* general code cleanup -* Dec 8, 1998 Ivan Passos Cyclom-2X firmware load implementation. -* Aug 8, 1998 acme Initial version. -*/ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/init.h> /* __init */ -#include <linux/module.h> -#include <linux/kernel.h> /* printk(), and other useful stuff */ -#include <linux/stddef.h> /* offsetof(), etc. */ -#include <linux/errno.h> /* return codes */ -#include <linux/cycx_drv.h> /* API definitions */ -#include <linux/cycx_cfm.h> /* CYCX firmware module definitions */ -#include <linux/delay.h> /* udelay, msleep_interruptible */ -#include <asm/io.h> /* read[wl], write[wl], ioremap, iounmap */ - -#define MOD_VERSION 0 -#define MOD_RELEASE 6 - -MODULE_AUTHOR("Arnaldo Carvalho de Melo"); -MODULE_DESCRIPTION("Cyclom 2x Sync Card Driver"); -MODULE_LICENSE("GPL"); - -/* Hardware-specific functions */ -static int load_cyc2x(struct cycx_hw *hw, struct cycx_firmware *cfm, u32 len); -static void cycx_bootcfg(struct cycx_hw *hw); - -static int reset_cyc2x(void __iomem *addr); -static int detect_cyc2x(void __iomem *addr); - -/* Miscellaneous functions */ -static int get_option_index(const long *optlist, long optval); -static u16 checksum(u8 *buf, u32 len); - -#define wait_cyc(addr) cycx_exec(addr + CMD_OFFSET) - -/* Global Data */ - -/* private data */ -static const char fullname[] = "Cyclom 2X Support Module"; -static const char copyright[] = - "(c) 1998-2003 Arnaldo Carvalho de Melo <acme@conectiva.com.br>"; - -/* Hardware configuration options. - * These are arrays of configuration options used by verification routines. - * The first element of each array is its size (i.e. number of options). - */ -static const long cyc2x_dpmbase_options[] = { - 20, - 0xA0000, 0xA4000, 0xA8000, 0xAC000, 0xB0000, 0xB4000, 0xB8000, - 0xBC000, 0xC0000, 0xC4000, 0xC8000, 0xCC000, 0xD0000, 0xD4000, - 0xD8000, 0xDC000, 0xE0000, 0xE4000, 0xE8000, 0xEC000 -}; - -static const long cycx_2x_irq_options[] = { 7, 3, 5, 9, 10, 11, 12, 15 }; - -/* Kernel Loadable Module Entry Points */ -/* Module 'insert' entry point. - * o print announcement - * o initialize static data - * - * Return: 0 Ok - * < 0 error. - * Context: process */ - -static int __init cycx_drv_init(void) -{ - pr_info("%s v%u.%u %s\n", - fullname, MOD_VERSION, MOD_RELEASE, copyright); - - return 0; -} - -/* Module 'remove' entry point. - * o release all remaining system resources */ -static void cycx_drv_cleanup(void) -{ -} - -/* Kernel APIs */ -/* Set up adapter. - * o detect adapter type - * o verify hardware configuration options - * o check for hardware conflicts - * o set up adapter shared memory - * o test adapter memory - * o load firmware - * Return: 0 ok. - * < 0 error */ -EXPORT_SYMBOL(cycx_setup); -int cycx_setup(struct cycx_hw *hw, void *cfm, u32 len, unsigned long dpmbase) -{ - int err; - - /* Verify IRQ configuration options */ - if (!get_option_index(cycx_2x_irq_options, hw->irq)) { - pr_err("IRQ %d is invalid!\n", hw->irq); - return -EINVAL; - } - - /* Setup adapter dual-port memory window and test memory */ - if (!dpmbase) { - pr_err("you must specify the dpm address!\n"); - return -EINVAL; - } else if (!get_option_index(cyc2x_dpmbase_options, dpmbase)) { - pr_err("memory address 0x%lX is invalid!\n", dpmbase); - return -EINVAL; - } - - hw->dpmbase = ioremap(dpmbase, CYCX_WINDOWSIZE); - hw->dpmsize = CYCX_WINDOWSIZE; - - if (!detect_cyc2x(hw->dpmbase)) { - pr_err("adapter Cyclom 2X not found at address 0x%lX!\n", - dpmbase); - return -EINVAL; - } - - pr_info("found Cyclom 2X card at address 0x%lX\n", dpmbase); - - /* Load firmware. If loader fails then shut down adapter */ - err = load_cyc2x(hw, cfm, len); - - if (err) - cycx_down(hw); /* shutdown adapter */ - - return err; -} - -EXPORT_SYMBOL(cycx_down); -int cycx_down(struct cycx_hw *hw) -{ - iounmap(hw->dpmbase); - return 0; -} - -/* Enable interrupt generation. */ -static void cycx_inten(struct cycx_hw *hw) -{ - writeb(0, hw->dpmbase); -} - -/* Generate an interrupt to adapter's CPU. */ -EXPORT_SYMBOL(cycx_intr); -void cycx_intr(struct cycx_hw *hw) -{ - writew(0, hw->dpmbase + GEN_CYCX_INTR); -} - -/* Execute Adapter Command. - * o Set exec flag. - * o Busy-wait until flag is reset. */ -EXPORT_SYMBOL(cycx_exec); -int cycx_exec(void __iomem *addr) -{ - u16 i = 0; - /* wait till addr content is zeroed */ - - while (readw(addr)) { - udelay(1000); - - if (++i > 50) - return -1; - } - - return 0; -} - -/* Read absolute adapter memory. - * Transfer data from adapter's memory to data buffer. */ -EXPORT_SYMBOL(cycx_peek); -int cycx_peek(struct cycx_hw *hw, u32 addr, void *buf, u32 len) -{ - if (len == 1) - *(u8*)buf = readb(hw->dpmbase + addr); - else - memcpy_fromio(buf, hw->dpmbase + addr, len); - - return 0; -} - -/* Write Absolute Adapter Memory. - * Transfer data from data buffer to adapter's memory. */ -EXPORT_SYMBOL(cycx_poke); -int cycx_poke(struct cycx_hw *hw, u32 addr, void *buf, u32 len) -{ - if (len == 1) - writeb(*(u8*)buf, hw->dpmbase + addr); - else - memcpy_toio(hw->dpmbase + addr, buf, len); - - return 0; -} - -/* Hardware-Specific Functions */ - -/* Load Aux Routines */ -/* Reset board hardware. - return 1 if memory exists at addr and 0 if not. */ -static int memory_exists(void __iomem *addr) -{ - int tries = 0; - - for (; tries < 3 ; tries++) { - writew(TEST_PATTERN, addr + 0x10); - - if (readw(addr + 0x10) == TEST_PATTERN) - if (readw(addr + 0x10) == TEST_PATTERN) - return 1; - - msleep_interruptible(1 * 1000); - } - - return 0; -} - -/* Load reset code. */ -static void reset_load(void __iomem *addr, u8 *buffer, u32 cnt) -{ - void __iomem *pt_code = addr + RESET_OFFSET; - u16 i; /*, j; */ - - for (i = 0 ; i < cnt ; i++) { -/* for (j = 0 ; j < 50 ; j++); Delay - FIXME busy waiting... */ - writeb(*buffer++, pt_code++); - } -} - -/* Load buffer using boot interface. - * o copy data from buffer to Cyclom-X memory - * o wait for reset code to copy it to right portion of memory */ -static int buffer_load(void __iomem *addr, u8 *buffer, u32 cnt) -{ - memcpy_toio(addr + DATA_OFFSET, buffer, cnt); - writew(GEN_BOOT_DAT, addr + CMD_OFFSET); - - return wait_cyc(addr); -} - -/* Set up entry point and kick start Cyclom-X CPU. */ -static void cycx_start(void __iomem *addr) -{ - /* put in 0x30 offset the jump instruction to the code entry point */ - writeb(0xea, addr + 0x30); - writeb(0x00, addr + 0x31); - writeb(0xc4, addr + 0x32); - writeb(0x00, addr + 0x33); - writeb(0x00, addr + 0x34); - - /* cmd to start executing code */ - writew(GEN_START, addr + CMD_OFFSET); -} - -/* Load and boot reset code. */ -static void cycx_reset_boot(void __iomem *addr, u8 *code, u32 len) -{ - void __iomem *pt_start = addr + START_OFFSET; - - writeb(0xea, pt_start++); /* jmp to f000:3f00 */ - writeb(0x00, pt_start++); - writeb(0xfc, pt_start++); - writeb(0x00, pt_start++); - writeb(0xf0, pt_start); - reset_load(addr, code, len); - - /* 80186 was in hold, go */ - writeb(0, addr + START_CPU); - msleep_interruptible(1 * 1000); -} - -/* Load data.bin file through boot (reset) interface. */ -static int cycx_data_boot(void __iomem *addr, u8 *code, u32 len) -{ - void __iomem *pt_boot_cmd = addr + CMD_OFFSET; - u32 i; - - /* boot buffer length */ - writew(CFM_LOAD_BUFSZ, pt_boot_cmd + sizeof(u16)); - writew(GEN_DEFPAR, pt_boot_cmd); - - if (wait_cyc(addr) < 0) - return -1; - - writew(0, pt_boot_cmd + sizeof(u16)); - writew(0x4000, pt_boot_cmd + 2 * sizeof(u16)); - writew(GEN_SET_SEG, pt_boot_cmd); - - if (wait_cyc(addr) < 0) - return -1; - - for (i = 0 ; i < len ; i += CFM_LOAD_BUFSZ) - if (buffer_load(addr, code + i, - min_t(u32, CFM_LOAD_BUFSZ, (len - i))) < 0) { - pr_err("Error !!\n"); - return -1; - } - - return 0; -} - - -/* Load code.bin file through boot (reset) interface. */ -static int cycx_code_boot(void __iomem *addr, u8 *code, u32 len) -{ - void __iomem *pt_boot_cmd = addr + CMD_OFFSET; - u32 i; - - /* boot buffer length */ - writew(CFM_LOAD_BUFSZ, pt_boot_cmd + sizeof(u16)); - writew(GEN_DEFPAR, pt_boot_cmd); - - if (wait_cyc(addr) < 0) - return -1; - - writew(0x0000, pt_boot_cmd + sizeof(u16)); - writew(0xc400, pt_boot_cmd + 2 * sizeof(u16)); - writew(GEN_SET_SEG, pt_boot_cmd); - - if (wait_cyc(addr) < 0) - return -1; - - for (i = 0 ; i < len ; i += CFM_LOAD_BUFSZ) - if (buffer_load(addr, code + i, - min_t(u32, CFM_LOAD_BUFSZ, (len - i)))) { - pr_err("Error !!\n"); - return -1; - } - - return 0; -} - -/* Load adapter from the memory image of the CYCX firmware module. - * o verify firmware integrity and compatibility - * o start adapter up */ -static int load_cyc2x(struct cycx_hw *hw, struct cycx_firmware *cfm, u32 len) -{ - int i, j; - struct cycx_fw_header *img_hdr; - u8 *reset_image, - *data_image, - *code_image; - void __iomem *pt_cycld = hw->dpmbase + 0x400; - u16 cksum; - - /* Announce */ - pr_info("firmware signature=\"%s\"\n", cfm->signature); - - /* Verify firmware signature */ - if (strcmp(cfm->signature, CFM_SIGNATURE)) { - pr_err("load_cyc2x: not Cyclom-2X firmware!\n"); - return -EINVAL; - } - - pr_info("firmware version=%u\n", cfm->version); - - /* Verify firmware module format version */ - if (cfm->version != CFM_VERSION) { - pr_err("%s: firmware format %u rejected! Expecting %u.\n", - __func__, cfm->version, CFM_VERSION); - return -EINVAL; - } - - /* Verify firmware module length and checksum */ - cksum = checksum((u8*)&cfm->info, sizeof(struct cycx_fw_info) + - cfm->info.codesize); -/* - FIXME cfm->info.codesize is off by 2 - if (((len - sizeof(struct cycx_firmware) - 1) != cfm->info.codesize) || -*/ - if (cksum != cfm->checksum) { - pr_err("%s: firmware corrupted!\n", __func__); - pr_err(" cdsize = 0x%x (expected 0x%lx)\n", - len - (int)sizeof(struct cycx_firmware) - 1, - cfm->info.codesize); - pr_err(" chksum = 0x%x (expected 0x%x)\n", - cksum, cfm->checksum); - return -EINVAL; - } - - /* If everything is ok, set reset, data and code pointers */ - img_hdr = (struct cycx_fw_header *)&cfm->image; -#ifdef FIRMWARE_DEBUG - pr_info("%s: image sizes\n", __func__); - pr_info(" reset=%lu\n", img_hdr->reset_size); - pr_info(" data=%lu\n", img_hdr->data_size); - pr_info(" code=%lu\n", img_hdr->code_size); -#endif - reset_image = ((u8 *)img_hdr) + sizeof(struct cycx_fw_header); - data_image = reset_image + img_hdr->reset_size; - code_image = data_image + img_hdr->data_size; - - /*---- Start load ----*/ - /* Announce */ - pr_info("loading firmware %s (ID=%u)...\n", - cfm->descr[0] ? cfm->descr : "unknown firmware", - cfm->info.codeid); - - for (i = 0 ; i < 5 ; i++) { - /* Reset Cyclom hardware */ - if (!reset_cyc2x(hw->dpmbase)) { - pr_err("dpm problem or board not found\n"); - return -EINVAL; - } - - /* Load reset.bin */ - cycx_reset_boot(hw->dpmbase, reset_image, img_hdr->reset_size); - /* reset is waiting for boot */ - writew(GEN_POWER_ON, pt_cycld); - msleep_interruptible(1 * 1000); - - for (j = 0 ; j < 3 ; j++) - if (!readw(pt_cycld)) - goto reset_loaded; - else - msleep_interruptible(1 * 1000); - } - - pr_err("reset not started\n"); - return -EINVAL; - -reset_loaded: - /* Load data.bin */ - if (cycx_data_boot(hw->dpmbase, data_image, img_hdr->data_size)) { - pr_err("cannot load data file\n"); - return -EINVAL; - } - - /* Load code.bin */ - if (cycx_code_boot(hw->dpmbase, code_image, img_hdr->code_size)) { - pr_err("cannot load code file\n"); - return -EINVAL; - } - - /* Prepare boot-time configuration data */ - cycx_bootcfg(hw); - - /* kick-off CPU */ - cycx_start(hw->dpmbase); - - /* Arthur Ganzert's tip: wait a while after the firmware loading... - seg abr 26 17:17:12 EST 1999 - acme */ - msleep_interruptible(7 * 1000); - pr_info("firmware loaded!\n"); - - /* enable interrupts */ - cycx_inten(hw); - - return 0; -} - -/* Prepare boot-time firmware configuration data. - * o initialize configuration data area - From async.doc - V_3.4.0 - 07/18/1994 - - As of now, only static buffers are available to the user. - So, the bit VD_RXDIRC must be set in 'valid'. That means that user - wants to use the static transmission and reception buffers. */ -static void cycx_bootcfg(struct cycx_hw *hw) -{ - /* use fixed buffers */ - writeb(FIXED_BUFFERS, hw->dpmbase + CONF_OFFSET); -} - -/* Detect Cyclom 2x adapter. - * Following tests are used to detect Cyclom 2x adapter: - * to be completed based on the tests done below - * Return 1 if detected o.k. or 0 if failed. - * Note: This test is destructive! Adapter will be left in shutdown - * state after the test. */ -static int detect_cyc2x(void __iomem *addr) -{ - reset_cyc2x(addr); - - return memory_exists(addr); -} - -/* Miscellaneous */ -/* Get option's index into the options list. - * Return option's index (1 .. N) or zero if option is invalid. */ -static int get_option_index(const long *optlist, long optval) -{ - int i = 1; - - for (; i <= optlist[0]; ++i) - if (optlist[i] == optval) - return i; - - return 0; -} - -/* Reset adapter's CPU. */ -static int reset_cyc2x(void __iomem *addr) -{ - writeb(0, addr + RST_ENABLE); - msleep_interruptible(2 * 1000); - writeb(0, addr + RST_DISABLE); - msleep_interruptible(2 * 1000); - - return memory_exists(addr); -} - -/* Calculate 16-bit CRC using CCITT polynomial. */ -static u16 checksum(u8 *buf, u32 len) -{ - u16 crc = 0; - u16 mask, flag; - - for (; len; --len, ++buf) - for (mask = 0x80; mask; mask >>= 1) { - flag = (crc & 0x8000); - crc <<= 1; - crc |= ((*buf & mask) ? 1 : 0); - - if (flag) - crc ^= 0x1021; - } - - return crc; -} - -module_init(cycx_drv_init); -module_exit(cycx_drv_cleanup); - -/* End */ diff --git a/drivers/net/wan/cycx_main.c b/drivers/net/wan/cycx_main.c deleted file mode 100644 index 81fbbad406be..000000000000 --- a/drivers/net/wan/cycx_main.c +++ /dev/null @@ -1,346 +0,0 @@ -/* -* cycx_main.c Cyclades Cyclom 2X WAN Link Driver. Main module. -* -* Author: Arnaldo Carvalho de Melo <acme@conectiva.com.br> -* -* Copyright: (c) 1998-2003 Arnaldo Carvalho de Melo -* -* Based on sdlamain.c by Gene Kozin <genek@compuserve.com> & -* Jaspreet Singh <jaspreet@sangoma.com> -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License -* as published by the Free Software Foundation; either version -* 2 of the License, or (at your option) any later version. -* ============================================================================ -* Please look at the bitkeeper changelog (or any other scm tool that ends up -* importing bitkeeper changelog or that replaces bitkeeper in the future as -* main tool for linux development). -* -* 2001/05/09 acme Fix MODULE_DESC for debug, .bss nitpicks, -* some cleanups -* 2000/07/13 acme remove useless #ifdef MODULE and crap -* #if KERNEL_VERSION > blah -* 2000/07/06 acme __exit at cyclomx_cleanup -* 2000/04/02 acme dprintk and cycx_debug -* module_init/module_exit -* 2000/01/21 acme rename cyclomx_open to cyclomx_mod_inc_use_count -* and cyclomx_close to cyclomx_mod_dec_use_count -* 2000/01/08 acme cleanup -* 1999/11/06 acme cycx_down back to life (it needs to be -* called to iounmap the dpmbase) -* 1999/08/09 acme removed references to enable_tx_int -* use spinlocks instead of cli/sti in -* cyclomx_set_state -* 1999/05/19 acme works directly linked into the kernel -* init_waitqueue_head for 2.3.* kernel -* 1999/05/18 acme major cleanup (polling not needed), etc -* 1998/08/28 acme minor cleanup (ioctls for firmware deleted) -* queue_task activated -* 1998/08/08 acme Initial version. -*/ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/stddef.h> /* offsetof(), etc. */ -#include <linux/errno.h> /* return codes */ -#include <linux/string.h> /* inline memset(), etc. */ -#include <linux/slab.h> /* kmalloc(), kfree() */ -#include <linux/kernel.h> /* printk(), and other useful stuff */ -#include <linux/module.h> /* support for loadable modules */ -#include <linux/ioport.h> /* request_region(), release_region() */ -#include <linux/wanrouter.h> /* WAN router definitions */ -#include <linux/cyclomx.h> /* cyclomx common user API definitions */ -#include <linux/init.h> /* __init (when not using as a module) */ -#include <linux/interrupt.h> - -unsigned int cycx_debug; - -MODULE_AUTHOR("Arnaldo Carvalho de Melo"); -MODULE_DESCRIPTION("Cyclom 2X Sync Card Driver."); -MODULE_LICENSE("GPL"); -module_param(cycx_debug, int, 0); -MODULE_PARM_DESC(cycx_debug, "cyclomx debug level"); - -/* Defines & Macros */ - -#define CYCX_DRV_VERSION 0 /* version number */ -#define CYCX_DRV_RELEASE 11 /* release (minor version) number */ -#define CYCX_MAX_CARDS 1 /* max number of adapters */ - -#define CONFIG_CYCX_CARDS 1 - -/* Function Prototypes */ - -/* WAN link driver entry points */ -static int cycx_wan_setup(struct wan_device *wandev, wandev_conf_t *conf); -static int cycx_wan_shutdown(struct wan_device *wandev); - -/* Miscellaneous functions */ -static irqreturn_t cycx_isr(int irq, void *dev_id); - -/* Global Data - * Note: All data must be explicitly initialized!!! - */ - -/* private data */ -static const char cycx_drvname[] = "cyclomx"; -static const char cycx_fullname[] = "CYCLOM 2X(tm) Sync Card Driver"; -static const char cycx_copyright[] = "(c) 1998-2003 Arnaldo Carvalho de Melo " - "<acme@conectiva.com.br>"; -static int cycx_ncards = CONFIG_CYCX_CARDS; -static struct cycx_device *cycx_card_array; /* adapter data space */ - -/* Kernel Loadable Module Entry Points */ - -/* - * Module 'insert' entry point. - * o print announcement - * o allocate adapter data space - * o initialize static data - * o register all cards with WAN router - * o calibrate Cyclom 2X shared memory access delay. - * - * Return: 0 Ok - * < 0 error. - * Context: process - */ -static int __init cycx_init(void) -{ - int cnt, err = -ENOMEM; - - pr_info("%s v%u.%u %s\n", - cycx_fullname, CYCX_DRV_VERSION, CYCX_DRV_RELEASE, - cycx_copyright); - - /* Verify number of cards and allocate adapter data space */ - cycx_ncards = min_t(int, cycx_ncards, CYCX_MAX_CARDS); - cycx_ncards = max_t(int, cycx_ncards, 1); - cycx_card_array = kcalloc(cycx_ncards, sizeof(struct cycx_device), GFP_KERNEL); - if (!cycx_card_array) - goto out; - - - /* Register adapters with WAN router */ - for (cnt = 0; cnt < cycx_ncards; ++cnt) { - struct cycx_device *card = &cycx_card_array[cnt]; - struct wan_device *wandev = &card->wandev; - - sprintf(card->devname, "%s%d", cycx_drvname, cnt + 1); - wandev->magic = ROUTER_MAGIC; - wandev->name = card->devname; - wandev->private = card; - wandev->setup = cycx_wan_setup; - wandev->shutdown = cycx_wan_shutdown; - err = register_wan_device(wandev); - - if (err) { - pr_err("%s registration failed with error %d!\n", - card->devname, err); - break; - } - } - - err = -ENODEV; - if (!cnt) { - kfree(cycx_card_array); - goto out; - } - err = 0; - cycx_ncards = cnt; /* adjust actual number of cards */ -out: return err; -} - -/* - * Module 'remove' entry point. - * o unregister all adapters from the WAN router - * o release all remaining system resources - */ -static void __exit cycx_exit(void) -{ - int i = 0; - - for (; i < cycx_ncards; ++i) { - struct cycx_device *card = &cycx_card_array[i]; - unregister_wan_device(card->devname); - } - - kfree(cycx_card_array); -} - -/* WAN Device Driver Entry Points */ -/* - * Setup/configure WAN link driver. - * o check adapter state - * o make sure firmware is present in configuration - * o allocate interrupt vector - * o setup Cyclom 2X hardware - * o call appropriate routine to perform protocol-specific initialization - * - * This function is called when router handles ROUTER_SETUP IOCTL. The - * configuration structure is in kernel memory (including extended data, if - * any). - */ -static int cycx_wan_setup(struct wan_device *wandev, wandev_conf_t *conf) -{ - int rc = -EFAULT; - struct cycx_device *card; - int irq; - - /* Sanity checks */ - - if (!wandev || !wandev->private || !conf) - goto out; - - card = wandev->private; - rc = -EBUSY; - if (wandev->state != WAN_UNCONFIGURED) - goto out; - - rc = -EINVAL; - if (!conf->data_size || !conf->data) { - pr_err("%s: firmware not found in configuration data!\n", - wandev->name); - goto out; - } - - if (conf->irq <= 0) { - pr_err("%s: can't configure without IRQ!\n", wandev->name); - goto out; - } - - /* Allocate IRQ */ - irq = conf->irq == 2 ? 9 : conf->irq; /* IRQ2 -> IRQ9 */ - - if (request_irq(irq, cycx_isr, 0, wandev->name, card)) { - pr_err("%s: can't reserve IRQ %d!\n", wandev->name, irq); - goto out; - } - - /* Configure hardware, load firmware, etc. */ - memset(&card->hw, 0, sizeof(card->hw)); - card->hw.irq = irq; - card->hw.dpmsize = CYCX_WINDOWSIZE; - card->hw.fwid = CFID_X25_2X; - spin_lock_init(&card->lock); - init_waitqueue_head(&card->wait_stats); - - rc = cycx_setup(&card->hw, conf->data, conf->data_size, conf->maddr); - if (rc) - goto out_irq; - - /* Initialize WAN device data space */ - wandev->irq = irq; - wandev->dma = wandev->ioport = 0; - wandev->maddr = (unsigned long)card->hw.dpmbase; - wandev->msize = card->hw.dpmsize; - wandev->hw_opt[2] = 0; - wandev->hw_opt[3] = card->hw.fwid; - - /* Protocol-specific initialization */ - switch (card->hw.fwid) { -#ifdef CONFIG_CYCLOMX_X25 - case CFID_X25_2X: - rc = cycx_x25_wan_init(card, conf); - break; -#endif - default: - pr_err("%s: this firmware is not supported!\n", wandev->name); - rc = -EINVAL; - } - - if (rc) { - cycx_down(&card->hw); - goto out_irq; - } - - rc = 0; -out: - return rc; -out_irq: - free_irq(irq, card); - goto out; -} - -/* - * Shut down WAN link driver. - * o shut down adapter hardware - * o release system resources. - * - * This function is called by the router when device is being unregistered or - * when it handles ROUTER_DOWN IOCTL. - */ -static int cycx_wan_shutdown(struct wan_device *wandev) -{ - int ret = -EFAULT; - struct cycx_device *card; - - /* sanity checks */ - if (!wandev || !wandev->private) - goto out; - - ret = 0; - if (wandev->state == WAN_UNCONFIGURED) - goto out; - - card = wandev->private; - wandev->state = WAN_UNCONFIGURED; - cycx_down(&card->hw); - pr_info("%s: irq %d being freed!\n", wandev->name, wandev->irq); - free_irq(wandev->irq, card); -out: return ret; -} - -/* Miscellaneous */ -/* - * Cyclom 2X Interrupt Service Routine. - * o acknowledge Cyclom 2X hardware interrupt. - * o call protocol-specific interrupt service routine, if any. - */ -static irqreturn_t cycx_isr(int irq, void *dev_id) -{ - struct cycx_device *card = dev_id; - - if (card->wandev.state == WAN_UNCONFIGURED) - goto out; - - if (card->in_isr) { - pr_warn("%s: interrupt re-entrancy on IRQ %d!\n", - card->devname, card->wandev.irq); - goto out; - } - - if (card->isr) - card->isr(card); - return IRQ_HANDLED; -out: - return IRQ_NONE; -} - -/* Set WAN device state. */ -void cycx_set_state(struct cycx_device *card, int state) -{ - unsigned long flags; - char *string_state = NULL; - - spin_lock_irqsave(&card->lock, flags); - - if (card->wandev.state != state) { - switch (state) { - case WAN_CONNECTED: - string_state = "connected!"; - break; - case WAN_DISCONNECTED: - string_state = "disconnected!"; - break; - } - pr_info("%s: link %s\n", card->devname, string_state); - card->wandev.state = state; - } - - card->state_tick = jiffies; - spin_unlock_irqrestore(&card->lock, flags); -} - -module_init(cycx_init); -module_exit(cycx_exit); diff --git a/drivers/net/wan/cycx_x25.c b/drivers/net/wan/cycx_x25.c deleted file mode 100644 index 06f3f6309e4b..000000000000 --- a/drivers/net/wan/cycx_x25.c +++ /dev/null @@ -1,1602 +0,0 @@ -/* -* cycx_x25.c Cyclom 2X WAN Link Driver. X.25 module. -* -* Author: Arnaldo Carvalho de Melo <acme@conectiva.com.br> -* -* Copyright: (c) 1998-2003 Arnaldo Carvalho de Melo -* -* Based on sdla_x25.c by Gene Kozin <genek@compuserve.com> -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License -* as published by the Free Software Foundation; either version -* 2 of the License, or (at your option) any later version. -* ============================================================================ -* 2001/01/12 acme use dev_kfree_skb_irq on interrupt context -* 2000/04/02 acme dprintk, cycx_debug -* fixed the bug introduced in get_dev_by_lcn and -* get_dev_by_dte_addr by the anonymous hacker -* that converted this driver to softnet -* 2000/01/08 acme cleanup -* 1999/10/27 acme use ARPHRD_HWX25 so that the X.25 stack know -* that we have a X.25 stack implemented in -* firmware onboard -* 1999/10/18 acme support for X.25 sockets in if_send, -* beware: socket(AF_X25...) IS WORK IN PROGRESS, -* TCP/IP over X.25 via wanrouter not affected, -* working. -* 1999/10/09 acme chan_disc renamed to chan_disconnect, -* began adding support for X.25 sockets: -* conf->protocol in new_if -* 1999/10/05 acme fixed return E... to return -E... -* 1999/08/10 acme serialized access to the card thru a spinlock -* in x25_exec -* 1999/08/09 acme removed per channel spinlocks -* removed references to enable_tx_int -* 1999/05/28 acme fixed nibble_to_byte, ackvc now properly treated -* if_send simplified -* 1999/05/25 acme fixed t1, t2, t21 & t23 configuration -* use spinlocks instead of cli/sti in some points -* 1999/05/24 acme finished the x25_get_stat function -* 1999/05/23 acme dev->type = ARPHRD_X25 (tcpdump only works, -* AFAIT, with ARPHRD_ETHER). This seems to be -* needed to use socket(AF_X25)... -* Now the config file must specify a peer media -* address for svc channels over a crossover cable. -* Removed hold_timeout from x25_channel_t, -* not used. -* A little enhancement in the DEBUG processing -* 1999/05/22 acme go to DISCONNECTED in disconnect_confirm_intr, -* instead of chan_disc. -* 1999/05/16 marcelo fixed timer initialization in SVCs -* 1999/01/05 acme x25_configure now get (most of) all -* parameters... -* 1999/01/05 acme pktlen now (correctly) uses log2 (value -* configured) -* 1999/01/03 acme judicious use of data types (u8, u16, u32, etc) -* 1999/01/03 acme cyx_isr: reset dpmbase to acknowledge -* indication (interrupt from cyclom 2x) -* 1999/01/02 acme cyx_isr: first hackings... -* 1999/01/0203 acme when initializing an array don't give less -* elements than declared... -* example: char send_cmd[6] = "?\xFF\x10"; -* you'll gonna lose a couple hours, 'cause your -* brain won't admit that there's an error in the -* above declaration... the side effect is that -* memset is put into the unresolved symbols -* instead of using the inline memset functions... -* 1999/01/02 acme began chan_connect, chan_send, x25_send -* 1998/12/31 acme x25_configure -* this code can be compiled as non module -* 1998/12/27 acme code cleanup -* IPX code wiped out! let's decrease code -* complexity for now, remember: I'm learning! :) -* bps_to_speed_code OK -* 1998/12/26 acme Minimal debug code cleanup -* 1998/08/08 acme Initial version. -*/ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#define CYCLOMX_X25_DEBUG 1 - -#include <linux/ctype.h> /* isdigit() */ -#include <linux/errno.h> /* return codes */ -#include <linux/if_arp.h> /* ARPHRD_HWX25 */ -#include <linux/kernel.h> /* printk(), and other useful stuff */ -#include <linux/module.h> -#include <linux/string.h> /* inline memset(), etc. */ -#include <linux/sched.h> -#include <linux/slab.h> /* kmalloc(), kfree() */ -#include <linux/stddef.h> /* offsetof(), etc. */ -#include <linux/wanrouter.h> /* WAN router definitions */ - -#include <asm/byteorder.h> /* htons(), etc. */ - -#include <linux/cyclomx.h> /* Cyclom 2X common user API definitions */ -#include <linux/cycx_x25.h> /* X.25 firmware API definitions */ - -#include <net/x25device.h> - -/* Defines & Macros */ -#define CYCX_X25_MAX_CMD_RETRY 5 -#define CYCX_X25_CHAN_MTU 2048 /* unfragmented logical channel MTU */ - -/* Data Structures */ -/* This is an extension of the 'struct net_device' we create for each network - interface to keep the rest of X.25 channel-specific data. */ -struct cycx_x25_channel { - /* This member must be first. */ - struct net_device *slave; /* WAN slave */ - - char name[WAN_IFNAME_SZ+1]; /* interface name, ASCIIZ */ - char addr[WAN_ADDRESS_SZ+1]; /* media address, ASCIIZ */ - char *local_addr; /* local media address, ASCIIZ - - svc thru crossover cable */ - s16 lcn; /* logical channel number/conn.req.key*/ - u8 link; - struct timer_list timer; /* timer used for svc channel disc. */ - u16 protocol; /* ethertype, 0 - multiplexed */ |