diff options
86 files changed, 1725 insertions, 846 deletions
diff --git a/Documentation/devicetree/bindings/mfd/cros-ec.txt b/Documentation/devicetree/bindings/mfd/cros-ec.txt deleted file mode 100644 index 4860eabd0f72..000000000000 --- a/Documentation/devicetree/bindings/mfd/cros-ec.txt +++ /dev/null @@ -1,76 +0,0 @@ -ChromeOS Embedded Controller - -Google's ChromeOS EC is a Cortex-M device which talks to the AP and -implements various function such as keyboard and battery charging. - -The EC can be connect through various means (I2C, SPI, LPC, RPMSG) and the -compatible string used depends on the interface. Each connection method has -its own driver which connects to the top level interface-agnostic EC driver. -Other Linux driver (such as cros-ec-keyb for the matrix keyboard) connect to -the top-level driver. - -Required properties (I2C): -- compatible: "google,cros-ec-i2c" -- reg: I2C slave address - -Required properties (SPI): -- compatible: "google,cros-ec-spi" -- reg: SPI chip select - -Required properties (RPMSG): -- compatible: "google,cros-ec-rpmsg" - -Optional properties (SPI): -- google,cros-ec-spi-pre-delay: Some implementations of the EC need a little - time to wake up from sleep before they can receive SPI transfers at a high - clock rate. This property specifies the delay, in usecs, between the - assertion of the CS to the start of the first clock pulse. -- google,cros-ec-spi-msg-delay: Some implementations of the EC require some - additional processing time in order to accept new transactions. If the delay - between transactions is not long enough the EC may not be able to respond - properly to subsequent transactions and cause them to hang. This property - specifies the delay, in usecs, introduced between transactions to account - for the time required by the EC to get back into a state in which new data - can be accepted. - -Required properties (LPC): -- compatible: "google,cros-ec-lpc" -- reg: List of (IO address, size) pairs defining the interface uses - -Optional properties (all): -- google,has-vbc-nvram: Some implementations of the EC include a small - nvram space used to store verified boot context data. This boolean flag - is used to specify whether this nvram is present or not. - -Example for I2C: - -i2c@12ca0000 { - cros-ec@1e { - reg = <0x1e>; - compatible = "google,cros-ec-i2c"; - interrupts = <14 0>; - interrupt-parent = <&wakeup_eint>; - wakeup-source; - }; - - -Example for SPI: - -spi@131b0000 { - ec@0 { - compatible = "google,cros-ec-spi"; - reg = <0x0>; - interrupts = <14 0>; - interrupt-parent = <&wakeup_eint>; - wakeup-source; - spi-max-frequency = <5000000>; - controller-data { - cs-gpio = <&gpf0 3 4 3 0>; - samsung,spi-cs; - samsung,spi-feedback-delay = <2>; - }; - }; -}; - - -Example for LPC is not supplied as it is not yet implemented. diff --git a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml index 487a8445722e..ceec33f6aba1 100644 --- a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml +++ b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml @@ -79,11 +79,12 @@ properties: description: | conversion mode: 0 - temperature, in C*10 - 1 - pre-scaled voltage value + 1 - pre-scaled 24-bit voltage value 2 - scaled voltage based on an optional resistor divider and optional offset + 3 - pre-scaled 16-bit voltage value $ref: /schemas/types.yaml#/definitions/uint32 - enum: [0, 1, 2] + enum: [0, 1, 2, 3] gw,voltage-divider-ohms: description: Values of resistors for divider on raw ADC input diff --git a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml new file mode 100644 index 000000000000..6a7279a85ec1 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml @@ -0,0 +1,129 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/google,cros-ec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ChromeOS Embedded Controller + +maintainers: + - Benson Leung <bleung@chromium.org> + - Enric Balletbo i Serra <enric.balletbo@collabora.com> + - Guenter Roeck <groeck@chromium.org> + +description: + Google's ChromeOS EC is a microcontroller which talks to the AP and + implements various functions such as keyboard and battery charging. + The EC can be connected through various interfaces (I2C, SPI, and others) + and the compatible string specifies which interface is being used. + +properties: + compatible: + oneOf: + - description: + For implementations of the EC is connected through I2C. + const: google,cros-ec-i2c + - description: + For implementations of the EC is connected through SPI. + const: google,cros-ec-spi + - description: + For implementations of the EC is connected through RPMSG. + const: google,cros-ec-rpmsg + + google,cros-ec-spi-pre-delay: + description: + This property specifies the delay in usecs between the + assertion of the CS and the first clock pulse. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - default: 0 + - minimum: 0 + + google,cros-ec-spi-msg-delay: + description: + This property specifies the delay in usecs between messages. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - default: 0 + - minimum: 0 + + google,has-vbc-nvram: + description: + Some implementations of the EC include a small nvram space used to + store verified boot context data. This boolean flag is used to specify + whether this nvram is present or not. + type: boolean + + spi-max-frequency: + description: Maximum SPI frequency of the device in Hz. + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + +if: + properties: + compatible: + contains: + enum: + - google,cros-ec-i2c + - google,cros-ec-rpmsg +then: + properties: + google,cros-ec-spi-pre-delay: false + google,cros-ec-spi-msg-delay: false + spi-max-frequency: false + +additionalProperties: false + +examples: + # Example for I2C + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + cros-ec@1e { + compatible = "google,cros-ec-i2c"; + reg = <0x1e>; + interrupts = <6 0>; + interrupt-parent = <&gpio0>; + }; + }; + + # Example for SPI + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + cros-ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0x0>; + google,cros-ec-spi-msg-delay = <30>; + google,cros-ec-spi-pre-delay = <10>; + interrupts = <99 0>; + interrupt-parent = <&gpio7>; + spi-max-frequency = <5000000>; + }; + }; + + # Example for RPMSG + - | + scp0 { + cros-ec { + compatible = "google,cros-ec-rpmsg"; + }; + }; +... diff --git a/Documentation/devicetree/bindings/mfd/khadas,mcu.yaml b/Documentation/devicetree/bindings/mfd/khadas,mcu.yaml new file mode 100644 index 000000000000..a3b976f101e8 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/khadas,mcu.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/khadas,mcu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Khadas on-board Microcontroller Device Tree Bindings + +maintainers: + - Neil Armstrong <narmstrong@baylibre.com> + +description: | + Khadas embeds a microcontroller on their VIM and Edge boards adding some + system feature as PWM Fan control (for VIM2 rev14 or VIM3), User memory + storage, IR/Key resume control, system power LED control and more. + +properties: + compatible: + enum: + - khadas,mcu # MCU revision is discoverable + + "#cooling-cells": # Only needed for boards having FAN control feature + const: 2 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + khadas_mcu: system-controller@18 { + compatible = "khadas,mcu"; + reg = <0x18>; + #cooling-cells = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml b/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml index e675611f80d0..8bcea8dd7d90 100644 --- a/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml +++ b/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml @@ -33,6 +33,9 @@ properties: items: - const: mux + interrupts: + maxItems: 1 + "#address-cells": const: 1 @@ -106,11 +109,13 @@ additionalProperties: false examples: - | #include <dt-bindings/clock/stm32mp1-clks.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> timer@40002400 { compatible = "st,stm32-lptimer"; reg = <0x40002400 0x400>; clocks = <&timer_clk>; clock-names = "mux"; + interrupts-extended = <&exti 47 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/mfd/st,stmfx.yaml b/Documentation/devicetree/bindings/mfd/st,stmfx.yaml new file mode 100644 index 000000000000..888ab4b5df45 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/st,stmfx.yaml @@ -0,0 +1,122 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/st,stmfx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectonics Multi-Function eXpander (STMFX) bindings + +description: ST Multi-Function eXpander (STMFX) is a slave controller using I2C for + communication with the main MCU. Its main features are GPIO expansion, + main MCU IDD measurement (IDD is the amount of current that flows + through VDD) and resistive touchscreen controller. + +maintainers: + - Amelie Delaunay <amelie.delaunay@st.com> + +properties: + compatible: + const: st,stmfx-0300 + + reg: + enum: [ 0x42, 0x43 ] + + interrupts: + maxItems: 1 + + drive-open-drain: true + + vdd-supply: + maxItems: 1 + + pinctrl: + type: object + + properties: + compatible: + const: st,stmfx-0300-pinctrl + + "#gpio-cells": + const: 2 + + "#interrupt-cells": + const: 2 + + gpio-controller: true + + interrupt-controller: true + + gpio-ranges: + description: if all STMFX pins[24:0] are available (no other STMFX function in use), + you should use gpio-ranges = <&stmfx_pinctrl 0 0 24>; + if agpio[3:0] are not available (STMFX Touchscreen function in use), + you should use gpio-ranges = <&stmfx_pinctrl 0 0 16>, <&stmfx_pinctrl 20 20 4>; + if agpio[7:4] are not available (STMFX IDD function in use), + you should use gpio-ranges = <&stmfx_pinctrl 0 0 20>; + maxItems: 1 + + patternProperties: + "^[a-zA-Z]*-pins$": + type: object + + allOf: + - $ref: ../pinctrl/pinmux-node.yaml + + properties: + pins: true + bias-disable: true + bias-pull-up: true + bias-pull-pin-default: true + bias-pull-down: true + drive-open-drain: true + drive-push-pull: true + output-high: true + output-low: true + + additionalProperties: false + + required: + - compatible + - "#gpio-cells" + - "#interrupt-cells" + - gpio-controller + - interrupt-controller + - gpio-ranges + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + stmfx@42 { + compatible = "st,stmfx-0300"; + reg = <0x42>; + interrupts = <8 IRQ_TYPE_EDGE_RISING>; + interrupt-parent = <&gpioi>; + vdd-supply = <&v3v3>; + + stmfx_pinctrl: pinctrl { + compatible = "st,stmfx-0300-pinctrl"; + #gpio-cells = <2>; + #interrupt-cells = <2>; + gpio-controller; + interrupt-controller; + gpio-ranges = <&stmfx_pinctrl 0 0 24>; + |