diff options
27 files changed, 1738 insertions, 419 deletions
diff --git a/Documentation/ABI/stable/sysfs-driver-mlxreg-io b/Documentation/ABI/stable/sysfs-driver-mlxreg-io new file mode 100644 index 000000000000..d9d117d457e1 --- /dev/null +++ b/Documentation/ABI/stable/sysfs-driver-mlxreg-io @@ -0,0 +1,78 @@ +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/ + asic_health + +Date: June 2018 +KernelVersion: 4.19 +Contact: Vadim Pasternak <vadimpmellanox.com> +Description: This file shows ASIC health status. The possible values are: + 0 - health failed, 2 - health OK, 3 - ASIC in booting state. + + The files are read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/ + cpld1_version + cpld2_version + +Date: June 2018 +KernelVersion: 4.19 +Contact: Vadim Pasternak <vadimpmellanox.com> +Description: These files show with which CPLD versions have been burned + on carrier and switch boards. + + The files are read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/select_iio +Date: June 2018 +KernelVersion: 4.19 +Contact: Vadim Pasternak <vadimpmellanox.com> +Description: This file allows iio devices selection. + + Attribute select_iio can be written with 0 or with 1. It + selects which one of iio devices can be accessed. + + The file is read/write. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/psu1_on + /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/psu2_on + /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pwr_cycle + /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pwr_down +Date: June 2018 +KernelVersion: 4.19 +Contact: Vadim Pasternak <vadimpmellanox.com> +Description: These files allow asserting system power cycling, switching + power supply units on and off and system's main power domain + shutdown. + Expected behavior: + When pwr_cycle is written 1: auxiliary power domain will go + down and after short period (about 1 second) up. + When psu1_on or psu2_on is written 1, related unit will be + disconnected from the power source, when written 0 - connected. + If both are written 1 - power supplies main power domain will + go down. + When pwr_down is written 1, system's main power domain will go + down. + + The files are write only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/ + reset_aux_pwr_or_ref + reset_asic_thermal + reset_hotswap_or_halt + reset_hotswap_or_wd + reset_fw_reset + reset_long_pb + reset_main_pwr_fail + reset_short_pb + reset_sw_reset +Date: June 2018 +KernelVersion: 4.19 +Contact: Vadim Pasternak <vadimpmellanox.com> +Description: These files show the system reset cause, as following: power + auxiliary outage or power refresh, ASIC thermal shutdown, halt, + hotswap, watchdog, firmware reset, long press power button, + short press power button, software reset. Value 1 in file means + this is reset cause, 0 - otherwise. Only one of the above + causes could be 1 at the same time, representing only last + reset cause. + + The files are read only. diff --git a/MAINTAINERS b/MAINTAINERS index 24b200d91b30..efb08d70cc28 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -13207,7 +13207,7 @@ L: linux-input@vger.kernel.org L: platform-driver-x86@vger.kernel.org S: Maintained F: drivers/input/touchscreen/silead.c -F: drivers/platform/x86/silead_dmi.c +F: drivers/platform/x86/touchscreen_dmi.c SILICON MOTION SM712 FRAME BUFFER DRIVER M: Sudip Mukherjee <sudipm.mukherjee@gmail.com> diff --git a/drivers/platform/mellanox/Kconfig b/drivers/platform/mellanox/Kconfig index 591bccdeaff9..cd8a90846063 100644 --- a/drivers/platform/mellanox/Kconfig +++ b/drivers/platform/mellanox/Kconfig @@ -23,4 +23,15 @@ config MLXREG_HOTPLUG This driver handles hot-plug events for the power suppliers, power cables and fans on the wide range Mellanox IB and Ethernet systems. +config MLXREG_IO + tristate "Mellanox platform register access driver support" + depends on REGMAP + depends on HWMON + help + This driver allows access to Mellanox programmable device register + space through sysfs interface. The sets of registers for sysfs access + are defined per system type bases and include the registers related + to system resets operation, system reset causes monitoring and some + kinds of mux selection. + endif # MELLANOX_PLATFORM diff --git a/drivers/platform/mellanox/Makefile b/drivers/platform/mellanox/Makefile index 7c8385e497a8..57074d9c722c 100644 --- a/drivers/platform/mellanox/Makefile +++ b/drivers/platform/mellanox/Makefile @@ -4,3 +4,4 @@ # Mellanox Platform-Specific Drivers # obj-$(CONFIG_MLXREG_HOTPLUG) += mlxreg-hotplug.o +obj-$(CONFIG_MLXREG_IO) += mlxreg-io.o diff --git a/drivers/platform/mellanox/mlxreg-hotplug.c b/drivers/platform/mellanox/mlxreg-hotplug.c index ac97aa020db3..b6d44550d98c 100644 --- a/drivers/platform/mellanox/mlxreg-hotplug.c +++ b/drivers/platform/mellanox/mlxreg-hotplug.c @@ -50,9 +50,8 @@ #define MLXREG_HOTPLUG_MASK_OFF 2 #define MLXREG_HOTPLUG_AGGR_MASK_OFF 1 -/* ASIC health parameters. */ -#define MLXREG_HOTPLUG_HEALTH_MASK 0x02 -#define MLXREG_HOTPLUG_RST_CNTR 3 +/* ASIC good health mask. */ +#define MLXREG_HOTPLUG_GOOD_HEALTH_MASK 0x02 #define MLXREG_HOTPLUG_ATTRS_MAX 24 #define MLXREG_HOTPLUG_NOT_ASSERT 3 @@ -103,6 +102,9 @@ static int mlxreg_hotplug_device_create(struct mlxreg_hotplug_priv_data *priv, { struct mlxreg_core_hotplug_platform_data *pdata; + /* Notify user by sending hwmon uevent. */ + kobject_uevent(&priv->hwmon->kobj, KOBJ_CHANGE); + /* * Return if adapter number is negative. It could be in case hotplug * event is not associated with hotplug device. @@ -134,8 +136,13 @@ static int mlxreg_hotplug_device_create(struct mlxreg_hotplug_priv_data *priv, return 0; } -static void mlxreg_hotplug_device_destroy(struct mlxreg_core_data *data) +static void +mlxreg_hotplug_device_destroy(struct mlxreg_hotplug_priv_data *priv, + struct mlxreg_core_data *data) { + /* Notify user by sending hwmon uevent. */ + kobject_uevent(&priv->hwmon->kobj, KOBJ_CHANGE); + if (data->hpdev.client) { i2c_unregister_device(data->hpdev.client); data->hpdev.client = NULL; @@ -278,14 +285,14 @@ mlxreg_hotplug_work_helper(struct mlxreg_hotplug_priv_data *priv, data = item->data + bit; if (regval & BIT(bit)) { if (item->inversed) - mlxreg_hotplug_device_destroy(data); + mlxreg_hotplug_device_destroy(priv, data); else mlxreg_hotplug_device_create(priv, data); } else { if (item->inversed) mlxreg_hotplug_device_create(priv, data); else - mlxreg_hotplug_device_destroy(data); + mlxreg_hotplug_device_destroy(priv, data); } } @@ -325,21 +332,40 @@ mlxreg_hotplug_health_work_helper(struct mlxreg_hotplug_priv_data *priv, goto out; regval &= data->mask; - item->cache = regval; - if (regval == MLXREG_HOTPLUG_HEALTH_MASK) { - if ((data->health_cntr++ == MLXREG_HOTPLUG_RST_CNTR) || - !priv->after_probe) { + + if (item->cache == regval) + goto ack_event; + + /* + * ASIC health indication is provided through two bits. Bits + * value 0x2 indicates that ASIC reached the good health, value + * 0x0 indicates ASIC the bad health or dormant state and value + * 0x3 indicates the booting state. During ASIC reset it should + * pass the following states: dormant -> booting -> good. + */ + if (regval == MLXREG_HOTPLUG_GOOD_HEALTH_MASK) { + if (!data->attached) { + /* + * ASIC is in steady state. Connect associated + * device, if configured. + */ mlxreg_hotplug_device_create(priv, data); data->attached = true; } } else { if (data->attached) { - mlxreg_hotplug_device_destroy(data); + /* + * ASIC health is failed after ASIC has been + * in steady state. Disconnect associated + * device, if it has been connected. + */ + mlxreg_hotplug_device_destroy(priv, data); data->attached = false; data->health_cntr = 0; } } - + item->cache = regval; +ack_event: /* Acknowledge event. */ ret = regmap_write(priv->regmap, data->reg + MLXREG_HOTPLUG_EVENT_OFF, 0); @@ -551,7 +577,7 @@ static void mlxreg_hotplug_unset_irq(struct mlxreg_hotplug_priv_data *priv) /* Remove all the attached devices in group. */ count = item->count; for (j = 0; j < count; j++, data++) - mlxreg_hotplug_device_destroy(data); + mlxreg_hotplug_device_destroy(priv, data); } } @@ -616,10 +642,6 @@ static int mlxreg_hotplug_probe(struct platform_device *pdev) disable_irq(priv->irq); spin_lock_init(&priv->lock); INIT_DELAYED_WORK(&priv->dwork_irq, mlxreg_hotplug_work_handler); - /* Perform initial interrupts setup. */ - mlxreg_hotplug_set_irq(priv); - - priv->after_probe = true; dev_set_drvdata(&pdev->dev, priv); err = mlxreg_hotplug_attr_init(priv); @@ -637,6 +659,10 @@ static int mlxreg_hotplug_probe(struct platform_device *pdev) return PTR_ERR(priv->hwmon); } + /* Perform initial interrupts setup. */ + mlxreg_hotplug_set_irq(priv); + priv->after_probe = true; + return 0; } diff --git a/drivers/platform/mellanox/mlxreg-io.c b/drivers/platform/mellanox/mlxreg-io.c new file mode 100644 index 000000000000..acfaf64ffde6 --- /dev/null +++ b/drivers/platform/mellanox/mlxreg-io.c @@ -0,0 +1,245 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Mellanox register access driver + * + * Copyright (C) 2018 Mellanox Technologies + * Copyright (C) 2018 Vadim Pasternak <vadimp@mellanox.com> + */ + +#include <linux/bitops.h> +#include <linux/device.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/platform_data/mlxreg.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +/* Attribute parameters. */ +#define MLXREG_IO_ATT_SIZE 10 +#define MLXREG_IO_ATT_NUM 48 + +/** + * struct mlxreg_io_priv_data - driver's private data: + * + * @pdev: platform device; + * @pdata: platform data; + * @hwmon: hwmon device; + * @mlxreg_io_attr: sysfs attributes array; + * @mlxreg_io_dev_attr: sysfs sensor device attribute array; + * @group: sysfs attribute group; + * @groups: list of sysfs attribute group for hwmon registration; + */ +struct mlxreg_io_priv_data { + struct platform_device *pdev; + struct mlxreg_core_platform_data *pdata; + struct device *hwmon; + struct attribute *mlxreg_io_attr[MLXREG_IO_ATT_NUM + 1]; + struct sensor_device_attribute mlxreg_io_dev_attr[MLXREG_IO_ATT_NUM]; + struct attribute_group group; + const struct attribute_group *groups[2]; +}; + +static int +mlxreg_io_get_reg(void *regmap, struct mlxreg_core_data *data, u32 in_val, + bool rw_flag, u32 *regval) +{ + int ret; + + ret = regmap_read(regmap, data->reg, regval); + if (ret) + goto access_error; + + /* + * There are three kinds of attributes: single bit, full register's + * bits and bit sequence. For the first kind field mask indicates which + * bits are not related and field bit is set zero. For the second kind + * field mask is set to zero and field bit is set with all bits one. + * No special handling for such kind of attributes - pass value as is. + * For the third kind, field mask indicates which bits are related and + * field bit is set to the first bit number (from 1 to 32) is the bit + * sequence. + */ + if (!data->bit) { + /* Single bit. */ + if (rw_flag) { + /* For show: expose effective bit value as 0 or 1. */ + *regval = !!(*regval & ~data->mask); + } else { + /* For store: set effective bit value. */ + *regval &= data->mask; + if (in_val) + *regval |= ~data->mask; + } + } else if (data->mask) { + /* Bit sequence. */ + if (rw_flag) { + /* For show: mask and shift right. */ + *regval = ror32(*regval & data->mask, (data->bit - 1)); + } else { + /* For store: shift to the position and mask. */ + in_val = rol32(in_val, data->bit - 1) & data->mask; + /* Clear relevant bits and set them to new value. */ + *regval = (*regval & ~data->mask) | in_val; + } + } + +access_error: + return ret; +} + +static ssize_t +mlxreg_io_attr_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct mlxreg_io_priv_data *priv = dev_get_drvdata(dev); + int index = to_sensor_dev_attr(attr)->index; + struct mlxreg_core_data *data = priv->pdata->data + index; + u32 regval = 0; + int ret; + + ret = mlxreg_io_get_reg(priv->pdata->regmap, data, 0, true, ®val); + if (ret) + goto access_error; + + return sprintf(buf, "%u\n", regval); + +access_error: + return ret; +} + +static ssize_t +mlxreg_io_attr_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t len) +{ + struct mlxreg_io_priv_data *priv = dev_get_drvdata(dev); + int index = to_sensor_dev_attr(attr)->index; + struct mlxreg_core_data *data = priv->pdata->data + index; + u32 input_val, regval; + int ret; + + if (len > MLXREG_IO_ATT_SIZE) + return -EINVAL; + + /* Convert buffer to input value. */ + ret = kstrtou32(buf, len, &input_val); + if (ret) + return ret; + + ret = mlxreg_io_get_reg(priv->pdata->regmap, data, input_val, false, + ®val); + if (ret) + goto access_error; + + ret = regmap_write(priv->pdata->regmap, data->reg, regval); + if (ret) + goto access_error; + + return len; + +access_error: + dev_err(&priv->pdev->dev, "Bus access error\n"); + return ret; +} + +static struct device_attribute mlxreg_io_devattr_rw = { + .show = mlxreg_io_attr_show, + .store = mlxreg_io_attr_store, +}; + +static int mlxreg_io_attr_init(struct mlxreg_io_priv_data *priv) +{ + int i; + + priv->group.attrs = devm_kcalloc(&priv->pdev->dev, + priv->pdata->counter, + sizeof(struct attribute *), + GFP_KERNEL); + if (!priv->group.attrs) + return -ENOMEM; + + for (i = 0; i < priv->pdata->counter; i++) { + priv->mlxreg_io_attr[i] = + &priv->mlxreg_io_dev_attr[i].dev_attr.attr; + memcpy(&priv->mlxreg_io_dev_attr[i].dev_attr, + &mlxreg_io_devattr_rw, sizeof(struct device_attribute)); + + /* Set attribute name as a label. */ + priv->mlxreg_io_attr[i]->name = + devm_kasprintf(&priv->pdev->dev, GFP_KERNEL, + priv->pdata->data[i].label); + + if (!priv->mlxreg_io_attr[i]->name) { + dev_err(&priv->pdev->dev, "Memory allocation failed for sysfs attribute %d.\n", + i + 1); + return -ENOMEM; + } + + priv->mlxreg_io_dev_attr[i].dev_attr.attr.mode = + priv->pdata->data[i].mode; + priv->mlxreg_io_dev_attr[i].dev_attr.attr.name = + priv->mlxreg_io_attr[i]->name; + priv->mlxreg_io_dev_attr[i].index = i; + sysfs_attr_init(&priv->mlxreg_io_dev_attr[i].dev_attr.attr); + } + + priv->group.attrs = priv->mlxreg_io_attr; + priv->groups[0] = &priv->group; + priv->groups[1] = NULL; + + return 0; +} + +static int mlxreg_io_probe(struct platform_device *pdev) +{ + struct mlxreg_io_priv_data *priv; + int err; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->pdata = dev_get_platdata(&pdev->dev); + if (!priv->pdata) { + dev_err(&pdev->dev, "Failed to get platform data.\n"); + return -EINVAL; + } + + priv->pdev = pdev; + + err = mlxreg_io_attr_init(priv); + if (err) { + dev_err(&priv->pdev->dev, "Failed to allocate attributes: %d\n", + err); + return err; + } + + priv->hwmon = devm_hwmon_device_register_with_groups(&pdev->dev, + "mlxreg_io", + priv, + priv->groups); + if (IS_ERR(priv->hwmon)) { + dev_err(&pdev->dev, "Failed to register hwmon device %ld\n", + PTR_ERR(priv->hwmon)); + return PTR_ERR(priv->hwmon); + } + + dev_set_drvdata(&pdev->dev, priv); + + return 0; +} + +static struct platform_driver mlxreg_io_driver = { + .driver = { + .name = "mlxreg-io", + }, + .probe = mlxreg_io_probe, +}; + +module_platform_driver(mlxreg_io_driver); + +MODULE_AUTHOR("Vadim Pasternak <vadimp@mellanox.com>"); +MODULE_DESCRIPTION("Mellanox regmap I/O access driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:mlxreg-io"); diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 107d336453b2..0c1aa6c314f5 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -1196,16 +1196,16 @@ config INTEL_TURBO_MAX_3 This driver is only required when the system is not using Hardware P-States (HWP). In HWP mode, priority can be read from ACPI tables. -config SILEAD_DMI - bool "Tablets with Silead touchscreens" +config TOUCHSCREEN_DMI + bool "DMI based touchscreen configuration info" depends on ACPI && DMI && I2C=y && TOUCHSCREEN_SILEAD ---help--- - Certain ACPI based tablets with Silead touchscreens do not have - enough data in ACPI tables for the touchscreen driver to handle - the touchscreen properly, as OEMs expected the data to be baked - into the tablet model specific version of the driver shipped - with the OS-image for the device. This option supplies the missing - information. Enable this for x86 tablets with Silead touchscreens. + Certain ACPI based tablets with e.g. Silead or Chipone touchscreens + do not have enough data in ACPI tables for the touchscreen driver to + handle the touchscreen properly, as OEMs expect the data to be baked + into the tablet model specific version of the driver shipped with the + the OS-image for the device. This option supplies the missing info. + Enable this for x86 tablets with Silead or Chipone touchscreens. config INTEL_CHTDC_TI_PWRBTN tristate "Intel Cherry Trail Dollar Cove TI power button driver" diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile index 50dc8f280914..e6d1becf81ce 100644 --- a/drivers/platform/x86/Makefile +++ b/drivers/platform/x86/Makefile @@ -78,7 +78,7 @@ obj-$(CONFIG_INTEL_SMARTCONNECT) += intel-smartconnect.o obj-$(CONFIG_PVPANIC) += pvpanic.o obj-$(CONFIG_ALIENWARE_WMI) += alienware-wmi.o obj-$(CONFIG_INTEL_PMC_IPC) += intel_pmc_ipc.o -obj-$(CONFIG_SILEAD_DMI) += silead_dmi.o +obj-$(CONFIG_TOUCHSCREEN_DMI) += touchscreen_dmi.o obj-$(CONFIG_SURFACE_PRO3_BUTTON) += surfacepro3_button.o obj-$(CONFIG_SURFACE_3_BUTTON) += surface3_button.o obj-$(CONFIG_INTEL_PUNIT_IPC) += intel_punit_ipc.o diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c index 8952173dd380..fcfeadd1301f 100644 --- a/drivers/platform/x86/acer-wmi.c +++ b/drivers/platform/x86/acer-wmi.c @@ -672,10 +672,7 @@ static void __init find_quirks(void) static bool has_cap(u32 cap) { - if ((interface->capability & cap) != 0) - return 1; - - return 0; + return interface->capability & cap; } /* @@ -2216,7 +2213,7 @@ static int __init acer_wmi_init(void) if (wmi_has_guid(AMW0_GUID1) && !dmi_check_system(amw0_whitelist) && quirks == &quirk_unknown) { - pr_err("Unsupported machine has AMW0_GUID1, unable to load\n"); + pr_debug("Unsupported machine has AMW0_GUID1, unable to load\n"); return -ENODEV; } diff --git a/drivers/platform/x86/asus-nb-wmi.c b/drivers/platform/x86/asus-nb-wmi.c index 136ff2b4cce5..db2af09067db 100644 --- a/drivers/platform/x86/asus-nb-wmi.c +++ b/drivers/platform/x86/asus-nb-wmi.c @@ -496,6 +496,7 @@ static const struct key_entry asus_nb_wmi_keymap[] = { { KE_KEY, 0xC4, { KEY_KBDILLUMUP } }, { KE_KEY, 0xC5, { KEY_KBDILLUMDOWN } }, { KE_IGNORE, 0xC6, }, /* Ambient Light Sensor notification */ + { KE_KEY, 0xFA, { KEY_PROG2 } }, /* Lid flip action */ { KE_END, 0}, }; diff --git a/drivers/platform/x86/asus-wireless.c b/drivers/platform/x86/asus-wireless.c index 6afd011de9e5..7458f7602d5e 100644 --- a/drivers/platform/x86/asus-wireless.c +++ b/drivers/platform/x86/asus-wireless.c @@ -52,13 +52,12 @@ static const struct acpi_device_id device_ids[] = { }; MODULE_DEVICE_TABLE(acpi, device_ids); -static u64 asus_wireless_method(acpi_handle handle, const char *method, - int param) +static acpi_status asus_wireless_method(acpi_handle handle, const char *method, + int param, u64 *ret) { struct acpi_object_list p; union acpi_object obj; acpi_status s; - u64 ret; acpi_handle_debug(handle, "Evaluating method %s, parameter %#x\n", method, param); @@ -67,24 +66,27 @@ static u64 asus_wireless_method(acpi_handle handle, const char *method, p.count = 1; p.pointer = &obj; - s = acpi_evaluate_integer(handle, (acpi_string) method, &p, &ret); + s = acpi_evaluate_integer(handle, (acpi_string) method, &p, ret); if (ACPI_FAILURE(s)) acpi_handle_err(handle, "Failed to eval method %s, param %#x (%d)\n", method, param, s); - acpi_handle_debug(handle, "%s returned %#llx\n", method, ret); - return ret; + else + acpi_handle_debug(handle, "%s returned %#llx\n", method, *ret); + + return s; } static enum led_brightness led_state_get(struct led_classdev *led) { struct asus_wireless_data *data; - int s; + acpi_status s; + u64 ret; data = container_of(led, struct asus_wireless_data, led); s = asus_wireless_method(acpi_device_handle(data->adev), "HSWC", - data->hswc_params->status); - if (s == data->hswc_params->on) + data->hswc_params->status, &ret); + if (ACPI_SUCCESS(s) && ret == data->hswc_params->on) return LED_FULL; return LED_OFF; } @@ -92,10 +94,11 @@ static enum led_brightness led_state_get(struct led_classdev *led) static void led_state_update(struct work_struct *work) { struct asus_wireless_data *data; + u64 ret; data = container_of(work, struct asus_wireless_data, led_work); asus_wireless_method(acpi_device_handle(data->adev), "HSWC", - data->led_state); + data->led_state, &ret); } static void led_state_set(struct led_classdev *led, enum led_brightness value) @@ -167,6 +170,7 @@ static int asus_wireless_add(struct acpi_device *adev) data->led.brightness_get = led_state_get; data->led.flags = LED_CORE_SUSPENDRESUME; data->led.max_brightness = 1; + data->led.default_trigger = "rfkill-none"; err = devm_led_classdev_register(&adev->dev, &data->led); if (err) destroy_workqueue(data->wq); diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c index d67f32a29bb4..2d6e272315a8 100644 --- a/drivers/platform/x86/asus-wmi.c +++ b/drivers/platform/x86/asus-wmi.c @@ -67,6 +67,7 @@ MODULE_LICENSE("GPL"); #define NOTIFY_BRNDOWN_MAX 0x2e #define NOTIFY_KBD_BRTUP 0xc4 #define NOTIFY_KBD_BRTDWN 0xc5 +#define NOTIFY_KBD_BRTTOGGLE 0xc7 /* WMI Methods */ #define ASUS_WMI_METHODID_SPEC 0x43455053 /* BIOS SPECification */ @@ -470,6 +471,7 @@ static void kbd_led_update(struct work_struct *work) ctrl_param = 0x80 | (asus->kbd_led_wk & 0x7F); asus_wmi_set_devstate(ASUS_WMI_DEVID_KBD_BACKLIGHT, ctrl_param, NULL); + led_classdev_notify_brightness_hw_changed(&asus->kbd_led, asus->kbd_led_wk); } static int kbd_led_read(struct asus_wmi *asus, int *level, int *env) @@ -500,15 +502,16 @@ static int kbd_led_read(struct asus_wmi *asus, int *level, int *env) return retval; } -static void kbd_led_set(struct led_classdev *led_cdev, - enum led_brightness value) +static void do_kbd_led_set(struct led_classdev *led_cdev, int value) { struct asus_wmi *asus; + int max_level; asus = container_of(led_cdev, struct asus_wmi, kbd_led); + max_level = asus->kbd_led.max_brightness; - if (value > asus->kbd_led.max_brightness) - value = asus->kbd_led.max_brightness; + if (value > max_level) + value = max_level; else if (value < 0) value = 0; @@ -516,6 +519,12 @@ static void kbd_led_set(struct led_classdev *led_cdev, queue_work(asus->led_workqueue, &asus->kbd_led_work); } +static void kbd_led_set(struct led_classdev *led_cdev, + enum led_brightness value) +{ + do_kbd_led_set(led_cdev, value); +} + static enum led_brightness kbd_led_get(struct led_classdev *led_cdev) { struct asus_wmi *asus; @@ -666,6 +675,7 @@ static int asus_wmi_led_init(struct asus_wmi *asus) asus->kbd_led_wk = led_val; asus->kbd_led.name = "asus::kbd_backlight"; + asus->kbd_led.flags = LED_BRIGHT_HW_CHANGED; asus->kbd_led.brightness_set = kbd_led_set; asus->kbd_led.brightness_get = kbd_led_get; asus->kbd_led.max_brightness = 3; @@ -1754,6 +1764,22 @@ static void asus_wmi_notify(u32 value, void *context) } } + if (code == NOTIFY_KBD_BRTUP) { + do_kbd_led_set(&asus->kbd_led, asus->kbd_led_wk + 1); + goto exit; + } + if (code == NOTIFY_KBD_BRTDWN) { + do_kbd_led_set(&asus->kbd_led, asus->kbd_led_wk - 1); + goto exit; + } + if (code == NOTIFY_KBD_BRTTOGGLE) { + if (asus->kbd_led_wk == asus->kbd_led.max_brightness) + do_kbd_led_set(&asus->kbd_led, 0); + else + do_kbd_led_set(&asus->kbd_led, asus->kbd_led_wk + 1); + goto exit; + } + if (is_display_toggle(code) && asus->driver->quirks->no_display_toggle) goto exit; diff --git a/drivers/platform/x86/dell-smbios-base.c b/drivers/platform/x86/dell-smbios-base.c index 9dc282ed5a9e..0537d44d45a6 100644 --- a/drivers/platform/x86/dell-smbios-base.c +++ b/drivers/platform/x86/dell-smbios-base.c @@ -212,6 +212,12 @@ int dell_smbios_call_filter(struct device *d, if ((buffer->cmd_class == CLASS_TOKEN_READ || buffer->cmd_class == CLASS_TOKEN_WRITE) && buffer->cmd_select < 3) { + /* tokens enabled ? */ + if (!da_tokens) { + dev_dbg(d, "no token support on this system\n"); + return -EINVAL; + } + /* find the matching token ID */ for (i = 0; i < da_num_tokens; i++) { if (da_tokens[i].location != buffer->input[0]) @@ -315,6 +321,9 @@ struct calling_interface_token *dell_smbios_find_token(int tokenid) { int i; + if (!da_tokens) + return NULL; + for (i = 0; i < da_num_tokens; i++) { if (da_tokens[i].tokenID == tokenid) return &da_tokens[i]; @@ -565,11 +574,6 @@ static int __init dell_smbios_init(void) dmi_walk(find_tokens, NULL); - if (!da_tokens) { - pr_info("Unable to find dmi tokens\n"); - return -ENODEV; - } - ret = platform_driver_register(&platform_driver); if (ret) goto fail_platform_driver; @@ -583,13 +587,6 @@ static int __init dell_smbios_init(void) if (ret) goto fail_platform_device_add; - /* duplicate tokens will cause problems building sysfs files */ - zero_duplicates(&platform_device->dev); - - ret = build_tokens_sysfs(platform_device); - if (ret) - goto fail_create_group; - /* register backends */ wmi = init_dell_smbios_wmi(); if (wmi) @@ -600,7 +597,16 @@ static int __init dell_smbios_init(void) if (wmi && smm) { pr_err("No SMBIOS backends available (wmi: %d, smm: %d)\n", wmi, smm); - goto fail_sysfs; + goto fail_create_group; + } + + if (da_tokens) { + /* duplicate tokens will cause problems building sysfs files */ + zero_duplicates(&platform_device->dev); + + ret = build_tokens_sysfs(platform_device); + if (ret) + goto fail_sysfs; } return 0; @@ -628,7 +634,8 @@ static void __exit dell_smbios_exit(void) exit_dell_smbios_smm(); mutex_lock(&smbios_mutex); if (platform_device) { - free_group(platform_device); + if (da_tokens) + free_group(platform_device); platform_device_unregister(platform_device); platform_driver_unregister(&platform_driver); } diff --git a/drivers/platform/x86/dell-smbios-smm.c b/drivers/platform/x86/dell-smbios-smm.c index e9e9da556318..97a90bebc360 100644 --- a/drivers/platform/x86/dell-smbios-smm.c +++ b/drivers/platform/x86/dell-smbios-smm.c @@ -24,7 +24,7 @@ static int da_command_address; static int da_command_code; static struct calling_interfa |