diff options
121 files changed, 1064 insertions, 450 deletions
diff --git a/Documentation/devicetree/bindings/net/ethernet.txt b/Documentation/devicetree/bindings/net/ethernet.txt index e1d76812419c..05150957ecfd 100644 --- a/Documentation/devicetree/bindings/net/ethernet.txt +++ b/Documentation/devicetree/bindings/net/ethernet.txt @@ -9,10 +9,26 @@ The following properties are common to the Ethernet controllers: - max-speed: number, specifies maximum speed in Mbit/s supported by the device; - max-frame-size: number, maximum transfer unit (IEEE defined MTU), rather than the maximum frame size (there's contradiction in ePAPR). -- phy-mode: string, operation mode of the PHY interface; supported values are - "mii", "gmii", "sgmii", "qsgmii", "tbi", "rev-mii", "rmii", "rgmii", "rgmii-id", - "rgmii-rxid", "rgmii-txid", "rtbi", "smii", "xgmii", "trgmii"; this is now a - de-facto standard property; +- phy-mode: string, operation mode of the PHY interface. This is now a de-facto + standard property; supported values are: + * "mii" + * "gmii" + * "sgmii" + * "qsgmii" + * "tbi" + * "rev-mii" + * "rmii" + * "rgmii" (RX and TX delays are added by the MAC when required) + * "rgmii-id" (RGMII with internal RX and TX delays provided by the PHY, the + MAC should not add the RX or TX delays in this case) + * "rgmii-rxid" (RGMII with internal RX delay provided by the PHY, the MAC + should not add an RX delay in this case) + * "rgmii-txid" (RGMII with internal TX delay provided by the PHY, the MAC + should not add an TX delay in this case) + * "rtbi" + * "smii" + * "xgmii" + * "trgmii" - phy-connection-type: the same as "phy-mode" property but described in ePAPR; - phy-handle: phandle, specifies a reference to a node representing a PHY device; this property is described in ePAPR and so preferred; diff --git a/Documentation/networking/nf_conntrack-sysctl.txt b/Documentation/networking/nf_conntrack-sysctl.txt index 399e4e866a9c..433b6724797a 100644 --- a/Documentation/networking/nf_conntrack-sysctl.txt +++ b/Documentation/networking/nf_conntrack-sysctl.txt @@ -62,10 +62,13 @@ nf_conntrack_generic_timeout - INTEGER (seconds) protocols. nf_conntrack_helper - BOOLEAN - 0 - disabled - not 0 - enabled (default) + 0 - disabled (default) + not 0 - enabled Enable automatic conntrack helper assignment. + If disabled it is required to set up iptables rules to assign + helpers to connections. See the CT target description in the + iptables-extensions(8) man page for further information. nf_conntrack_icmp_timeout - INTEGER (seconds) default 30 diff --git a/drivers/net/can/usb/peak_usb/pcan_ucan.h b/drivers/net/can/usb/peak_usb/pcan_ucan.h index e8fc4952c6b0..2147678f0225 100644 --- a/drivers/net/can/usb/peak_usb/pcan_ucan.h +++ b/drivers/net/can/usb/peak_usb/pcan_ucan.h @@ -43,11 +43,22 @@ struct __packed pucan_command { u16 args[3]; }; +#define PUCAN_TSLOW_BRP_BITS 10 +#define PUCAN_TSLOW_TSGEG1_BITS 8 +#define PUCAN_TSLOW_TSGEG2_BITS 7 +#define PUCAN_TSLOW_SJW_BITS 7 + +#define PUCAN_TSLOW_BRP_MASK ((1 << PUCAN_TSLOW_BRP_BITS) - 1) +#define PUCAN_TSLOW_TSEG1_MASK ((1 << PUCAN_TSLOW_TSGEG1_BITS) - 1) +#define PUCAN_TSLOW_TSEG2_MASK ((1 << PUCAN_TSLOW_TSGEG2_BITS) - 1) +#define PUCAN_TSLOW_SJW_MASK ((1 << PUCAN_TSLOW_SJW_BITS) - 1) + /* uCAN TIMING_SLOW command fields */ -#define PUCAN_TSLOW_SJW_T(s, t) (((s) & 0xf) | ((!!(t)) << 7)) -#define PUCAN_TSLOW_TSEG2(t) ((t) & 0xf) -#define PUCAN_TSLOW_TSEG1(t) ((t) & 0x3f) -#define PUCAN_TSLOW_BRP(b) ((b) & 0x3ff) +#define PUCAN_TSLOW_SJW_T(s, t) (((s) & PUCAN_TSLOW_SJW_MASK) | \ + ((!!(t)) << 7)) +#define PUCAN_TSLOW_TSEG2(t) ((t) & PUCAN_TSLOW_TSEG2_MASK) +#define PUCAN_TSLOW_TSEG1(t) ((t) & PUCAN_TSLOW_TSEG1_MASK) +#define PUCAN_TSLOW_BRP(b) ((b) & PUCAN_TSLOW_BRP_MASK) struct __packed pucan_timing_slow { __le16 opcode_channel; @@ -60,11 +71,21 @@ struct __packed pucan_timing_slow { __le16 brp; /* BaudRate Prescaler */ }; +#define PUCAN_TFAST_BRP_BITS 10 +#define PUCAN_TFAST_TSGEG1_BITS 5 +#define PUCAN_TFAST_TSGEG2_BITS 4 +#define PUCAN_TFAST_SJW_BITS 4 + +#define PUCAN_TFAST_BRP_MASK ((1 << PUCAN_TFAST_BRP_BITS) - 1) +#define PUCAN_TFAST_TSEG1_MASK ((1 << PUCAN_TFAST_TSGEG1_BITS) - 1) +#define PUCAN_TFAST_TSEG2_MASK ((1 << PUCAN_TFAST_TSGEG2_BITS) - 1) +#define PUCAN_TFAST_SJW_MASK ((1 << PUCAN_TFAST_SJW_BITS) - 1) + /* uCAN TIMING_FAST command fields */ -#define PUCAN_TFAST_SJW(s) ((s) & 0x3) -#define PUCAN_TFAST_TSEG2(t) ((t) & 0x7) -#define PUCAN_TFAST_TSEG1(t) ((t) & 0xf) -#define PUCAN_TFAST_BRP(b) ((b) & 0x3ff) +#define PUCAN_TFAST_SJW(s) ((s) & PUCAN_TFAST_SJW_MASK) +#define PUCAN_TFAST_TSEG2(t) ((t) & PUCAN_TFAST_TSEG2_MASK) +#define PUCAN_TFAST_TSEG1(t) ((t) & PUCAN_TFAST_TSEG1_MASK) +#define PUCAN_TFAST_BRP(b) ((b) & PUCAN_TFAST_BRP_MASK) struct __packed pucan_timing_fast { __le16 opcode_channel; diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_core.c b/drivers/net/can/usb/peak_usb/pcan_usb_core.c index c06382cdfdfe..f3141ca56bc3 100644 --- a/drivers/net/can/usb/peak_usb/pcan_usb_core.c +++ b/ |