diff options
| -rw-r--r-- | drivers/staging/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/staging/Makefile | 1 | ||||
| -rw-r--r-- | drivers/staging/serqt_usb2/Kconfig | 9 | ||||
| -rw-r--r-- | drivers/staging/serqt_usb2/Makefile | 1 | ||||
| -rw-r--r-- | drivers/staging/serqt_usb2/serqt_usb2.c | 1528 |
5 files changed, 0 insertions, 1541 deletions
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index ba76ab17902b..85dde86e8965 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -64,8 +64,6 @@ source "drivers/staging/octeon/Kconfig" source "drivers/staging/octeon-usb/Kconfig" -source "drivers/staging/serqt_usb2/Kconfig" - source "drivers/staging/vt6655/Kconfig" source "drivers/staging/vt6656/Kconfig" diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile index 22bb98e46d36..59e5e0968a1a 100644 --- a/drivers/staging/Makefile +++ b/drivers/staging/Makefile @@ -23,7 +23,6 @@ obj-$(CONFIG_TRANZPORT) += frontier/ obj-$(CONFIG_IDE_PHISON) += phison/ obj-$(CONFIG_LINE6_USB) += line6/ obj-$(CONFIG_NETLOGIC_XLR_NET) += netlogic/ -obj-$(CONFIG_USB_SERIAL_QUATECH2) += serqt_usb2/ obj-$(CONFIG_OCTEON_ETHERNET) += octeon/ obj-$(CONFIG_OCTEON_USB) += octeon-usb/ obj-$(CONFIG_VT6655) += vt6655/ diff --git a/drivers/staging/serqt_usb2/Kconfig b/drivers/staging/serqt_usb2/Kconfig deleted file mode 100644 index f4fed40e23dd..000000000000 --- a/drivers/staging/serqt_usb2/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -config USB_SERIAL_QUATECH2 - tristate "USB Quatech ESU-100 8 Port Serial Driver" - depends on USB_SERIAL - help - Say Y here if you want to use the Quatech ESU-100 8 port usb to - serial adapter. - - To compile this driver as a module, choose M here: the - module will be called serqt_usb2. diff --git a/drivers/staging/serqt_usb2/Makefile b/drivers/staging/serqt_usb2/Makefile deleted file mode 100644 index 21578617f7e8..000000000000 --- a/drivers/staging/serqt_usb2/Makefile +++ /dev/null @@ -1 +0,0 @@ -obj-$(CONFIG_USB_SERIAL_QUATECH2) += serqt_usb2.o diff --git a/drivers/staging/serqt_usb2/serqt_usb2.c b/drivers/staging/serqt_usb2/serqt_usb2.c deleted file mode 100644 index 999757de8fd5..000000000000 --- a/drivers/staging/serqt_usb2/serqt_usb2.c +++ /dev/null @@ -1,1528 +0,0 @@ -/* - * This code was developed for the Quatech USB line for linux, it used - * much of the code developed by Greg Kroah-Hartman for USB serial devices - * - */ - -#include <linux/errno.h> -#include <linux/slab.h> -#include <linux/tty.h> -#include <linux/tty_driver.h> -#include <linux/tty_flip.h> -#include <linux/module.h> -#include <linux/serial.h> -#include <linux/usb.h> -#include <linux/usb/serial.h> -#include <linux/uaccess.h> - -/* Version Information */ -#define DRIVER_VERSION "v2.14" -#define DRIVER_AUTHOR "Tim Gobeli, Quatech, Inc" -#define DRIVER_DESC "Quatech USB to Serial Driver" - -#define USB_VENDOR_ID_QUATECH 0x061d /* Quatech VID */ -#define QUATECH_SSU200 0xC030 /* SSU200 */ -#define QUATECH_DSU100 0xC040 /* DSU100 */ -#define QUATECH_DSU200 0xC050 /* DSU200 */ -#define QUATECH_QSU100 0xC060 /* QSU100 */ -#define QUATECH_QSU200 0xC070 /* QSU200 */ -#define QUATECH_ESU100A 0xC080 /* ESU100A */ -#define QUATECH_ESU100B 0xC081 /* ESU100B */ -#define QUATECH_ESU200A 0xC0A0 /* ESU200A */ -#define QUATECH_ESU200B 0xC0A1 /* ESU200B */ -#define QUATECH_HSU100A 0xC090 /* HSU100A */ -#define QUATECH_HSU100B 0xC091 /* HSU100B */ -#define QUATECH_HSU100C 0xC092 /* HSU100C */ -#define QUATECH_HSU100D 0xC093 /* HSU100D */ -#define QUATECH_HSU200A 0xC0B0 /* HSU200A */ -#define QUATECH_HSU200B 0xC0B1 /* HSU200B */ -#define QUATECH_HSU200C 0xC0B2 /* HSU200C */ -#define QUATECH_HSU200D 0xC0B3 /* HSU200D */ - -#define QT_SET_GET_DEVICE 0xc2 -#define QT_OPEN_CLOSE_CHANNEL 0xca -#define QT_GET_SET_PREBUF_TRIG_LVL 0xcc -#define QT_SET_ATF 0xcd -#define QT_GET_SET_REGISTER 0xc0 -#define QT_GET_SET_UART 0xc1 -#define QT_HW_FLOW_CONTROL_MASK 0xc5 -#define QT_SW_FLOW_CONTROL_MASK 0xc6 -#define QT_SW_FLOW_CONTROL_DISABLE 0xc7 -#define QT_BREAK_CONTROL 0xc8 - -#define USBD_TRANSFER_DIRECTION_IN 0xc0 -#define USBD_TRANSFER_DIRECTION_OUT 0x40 - -#define MAX_BAUD_RATE 460800 -#define MAX_BAUD_REMAINDER 4608 - -#define DIV_LATCH_LS 0x00 -#define XMT_HOLD_REGISTER 0x00 -#define XVR_BUFFER_REGISTER 0x00 -#define DIV_LATCH_MS 0x01 -#define FIFO_CONTROL_REGISTER 0x02 -#define LINE_CONTROL_REGISTER 0x03 -#define MODEM_CONTROL_REGISTER 0x04 -#define LINE_STATUS_REGISTER 0x05 -#define MODEM_STATUS_REGISTER 0x06 - -#define SERIAL_MCR_DTR 0x01 -#define SERIAL_MCR_RTS 0x02 -#define SERIAL_MCR_LOOP 0x10 - -#define SERIAL_MSR_CTS 0x10 -#define SERIAL_MSR_CD 0x80 -#define SERIAL_MSR_RI 0x40 -#define SERIAL_MSR_DSR 0x20 -#define SERIAL_MSR_MASK 0xf0 - -#define SERIAL_8_DATA 0x03 -#define SERIAL_7_DATA 0x02 -#define SERIAL_6_DATA 0x01 -#define SERIAL_5_DATA 0x00 - -#define SERIAL_ODD_PARITY 0X08 -#define SERIAL_EVEN_PARITY 0X18 -#define SERIAL_TWO_STOPB 0x04 -#define SERIAL_ONE_STOPB 0x00 - -#define DEFAULT_DIVISOR 0x30 /* gives 9600 baud rate */ -#define DEFAULT_LCR SERIAL_8_DATA /* 8, none , 1 */ - -#define FULLPWRBIT 0x00000080 -#define NEXT_BOARD_POWER_BIT 0x00000004 - -#define SERIAL_LSR_OE 0x02 -#define SERIAL_LSR_PE 0x04 -#define SERIAL_LSR_FE 0x08 -#define SERIAL_LSR_BI 0x10 - -#define SERIAL_MSR_CTS 0x10 -#define SERIAL_MSR_CD 0x80 -#define SERIAL_MSR_RI 0x40 -#define SERIAL_MSR_DSR 0x20 -#define SERIAL_MSR_MASK 0xf0 - -#define PREFUFF_LEVEL_CONSERVATIVE 128 -#define ATC_DISABLED 0x0 - -#define RR_BITS 0x03 /* for clearing clock bits */ -#define DUPMODE_BITS 0xc0 -#define CLKS_X4 0x02 - -#define LOOPMODE_BITS 0x41 /* LOOP1 = b6, LOOP0 = b0 (PORT B) */ -#define ALL_LOOPBACK 0x01 -#define MODEM_CTRL 0x40 -#define RS232_MODE 0x00 - -static const struct usb_device_id id_table[] = { - {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_SSU200)}, - {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_DSU100)}, - {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_DSU200)}, - {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_QSU100)}, - {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_QSU200)}, - {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_ESU100A)}, - {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_ESU100B)}, - {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_ESU200A)}, - {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_ESU200B)}, - {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_HSU100A)}, - {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_HSU100B)}, - {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_HSU100C)}, - {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_HSU100D)}, - {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_HSU200A)}, - {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_HSU200B)}, - {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_HSU200C)}, - {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_HSU200D)}, - {} /* Terminating entry */ -}; -MODULE_DEVICE_TABLE(usb, id_table); - -struct qt_get_device_data { - __u8 porta; - __u8 portb; - __u8 portc; -}; - -struct qt_open_channel_data { - __u8 line_status; - __u8 modem_status; -}; - -struct quatech_port { - int port_num; /* number of the port */ - struct urb *write_urb; /* write URB for this port */ - struct urb *read_urb; /* read URB for this port */ - struct urb *int_urb; - - __u8 shadow_lcr; /* last LCR value received */ - __u8 shadow_mcr; /* last MCR value received */ - __u8 shadow_msr; /* last MSR value received */ - __u8 shadow_lsr; /* last LSR value received */ - char open_ports; - - /* Used for TIOCMIWAIT */ - wait_queue_head_t msr_wait; - char prev_status, diff_status; - - wait_queue_head_t wait; - - struct async_icount icount; - - struct usb_serial_port *port; /* owner of this object */ - struct qt_get_device_data device_data; - struct mutex lock; - bool read_urb_busy; - int rx_holding; - int read_bulk_stopped; - char close_pending; -}; - -static int port_paranoia_check(struct usb_serial_port *port, - const char *function) -{ - if (!port) { - pr_debug("%s - port == NULL", function); - return -1; - } - if (!port->serial) { - pr_debug("%s - port->serial == NULL\n", function); - return -1; - } - - return 0; -} - -static int serial_paranoia_check(struct usb_serial *serial, - const char *function) -{ - if (!serial) { - pr_debug("%s - serial == NULL\n", function); - return -1; - } - - if (!serial->type) { - pr_debug("%s - serial->type == NULL!", function); - return -1; - } - - return 0; -} - -static inline struct quatech_port *qt_get_port_private(struct usb_serial_port - *port) -{ - return (struct quatech_port *)usb_get_serial_port_data(port); -} - -static inline void qt_set_port_private(struct usb_serial_port *port, - struct quatech_port *data) -{ - usb_set_serial_port_data(port, (void *)data); -} - -static struct usb_serial *get_usb_serial(struct usb_serial_port *port, - const char *function) -{ - /* if no port was specified, or it fails a paranoia check */ - if (!port || - port_paranoia_check(port, function) || - serial_paranoia_check(port->serial, function)) { - /* - * then say that we dont have a valid usb_serial thing, - * which will end up genrating -ENODEV return values - */ - return NULL; - } - - return port->serial; -} - -static void process_line_status(struct quatech_port *qt_port, - unsigned char line_status) -{ - - qt_port->shadow_lsr = - line_status & (SERIAL_LSR_OE | SERIAL_LSR_PE | SERIAL_LSR_FE | - SERIAL_LSR_BI); -} - -static void process_modem_status(struct quatech_port *qt_port, - unsigned char modem_status) -{ - - qt_port->shadow_msr = modem_status; - wake_up_interruptible(&qt_port->wait); -} - -static void process_rx_char(struct usb_serial_port *port, unsigned char data) -{ - struct urb *urb = port->read_urb; - - if (urb->actual_length) - tty_insert_flip_char(&port->port, data, TTY_NORMAL); -} - -static void qt_write_bulk_callback(struct urb *urb) -{ - int status; - struct quatech_port *quatech_port; - - status = urb->status; - - if (status) { - dev_dbg(&urb->dev->dev, - "nonzero write bulk status received:%d\n", status); - return; - } - - quatech_port = urb->context; - - tty_port_tty_wakeup(&quatech_port->port->port); -} - -static void qt_interrupt_callback(struct urb *urb) -{ - /* FIXME */ -} - -static void qt_status_change_check(struct urb *urb, - struct quatech_port *qt_port, - struct usb_serial_port *port) -{ - int flag, i; - unsigned char *data = urb->transfer_buffer; - unsigned int rx_count = urb->actual_length; - - for (i = 0; i < rx_count; ++i) { - /* Look ahead code here */ - if ((i <= (rx_count - 3)) && (data[i] == 0x1b) - && (data[i + 1] == 0x1b)) { - flag = 0; - switch (data[i + 2]) { - case 0x00: - if (i > (rx_count - 4)) { - dev_dbg(&port->dev, - "Illegal escape seuences in received data\n"); - break; - } - - process_line_status(qt_port, data[i + 3]); - - i += 3; - flag = 1; - break; - - case 0x01: - if (i > (rx_count - 4)) { - dev_dbg(&port->dev, - "Illegal escape seuences in received data\n"); - break; - } - - process_modem_status(qt_port, data[i + 3]); - - i += 3; - flag = 1; - break; - - case 0xff: - dev_dbg(&port->dev, "No status sequence.\n"); - - process_rx_char(port, data[i]); - process_rx_char(port, data[i + 1]); - - i += 2; - break; - } - if (flag == 1) - continue; - } - - if (urb->actual_length) - tty_insert_flip_char(&port->port, data[i], TTY_NORMAL); - - } - tty_flip_buffer_push(&port->port); -} - -static void qt_read_bulk_callback(struct urb *urb) -{ - - struct usb_serial_port *port = urb->context; - struct usb_serial *serial = get_usb_serial(port, __func__); - struct quatech_port *qt_port = qt_get_port_private(port); - int result; - - if (urb->status) { - qt_port->read_bulk_stopped = 1; - dev_dbg(&urb->dev->dev, - "%s - nonzero write bulk status received: %d\n", - __func__, urb->status); - return; - } - - dev_dbg(&port->dev, - "%s - port->rx_holding = %d\n", __func__, qt_port->rx_holding); - - if (port_paranoia_check(port, __func__) != 0) { - qt_port->read_bulk_stopped = 1; - return; - } - - if (!serial) - return; - - if (qt_port->close_pending == 1) { - /* Were closing , stop reading */ - dev_dbg(&port->dev, - "%s - (qt_port->close_pending == 1\n", __func__); - qt_port->read_bulk_stopped = 1; - return; - } - - /* - * rx_holding is asserted by throttle, if we assert it, we're not - * receiving any more characters and let the box handle the flow - * control - */ - if (qt_port->rx_holding == 1) { - qt_port->read_bulk_stopped = 1; - return; - } - - if (urb->status) { - qt_port->read_bulk_stopped = 1; - - dev_dbg(&port->dev, - "%s - nonzero read bulk status received: %d\n", - __func__, urb->status); - return; - } - - if (urb->actual_length) - qt_status_change_check(urb, qt_port, port); - - /* Continue trying to always read */ - usb_fill_bulk_urb(port->read_urb, serial->dev, - usb_rcvbulkpipe(serial->dev, - port->bulk_in_endpointAddress), - port->read_urb->transfer_buffer, - port->read_urb->transfer_buffer_length, - qt_read_bulk_callback, port); - result = usb_submit_urb(port->read_urb, GFP_ATOMIC); - if (result) - dev_dbg(&port->dev, - "%s - failed resubmitting read urb, error %d", - __func__, result); - else { - if (urb->actual_length) { - tty_flip_buffer_push(&port->port); - tty_schedule_flip(&port->port); - } - } - - schedule_work(&port->work); -} - -/* - * qt_get_device - * Issue a GET_DEVICE vendor-specific request on the default control pipe If - * successful, fills in the qt_get_device_data structure pointed to by - * device_data, otherwise return a negative error number of the problem. - */ - -static int qt_get_device(struct usb_serial *serial, - struct qt_get_device_data *device_data) -{ - int result; - unsigned char *transfer_buffer; - - transfer_buffer = - kmalloc(sizeof(struct qt_get_device_data), GFP_KERNEL); - if (!transfer_buffer) - return -ENOMEM; - - result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), - QT_SET_GET_DEVICE, 0xc0, 0, 0, - transfer_buffer, - sizeof(struct qt_get_device_data), 300); - if (result > 0) - memcpy(device_data, transfer_buffer, - sizeof(struct qt_get_device_data)); - kfree(transfer_buffer); - - return result; -} - -/**************************************************************************** - * box_set_prebuffer_level - TELLS BOX WHEN TO ASSERT FLOW CONTROL - ****************************************************************************/ -static int box_set_prebuffer_level(struct usb_serial *serial) -{ - int result; - __u16 buffer_length; - - buffer_length = PREFUFF_LEVEL_CONSERVATIVE; - result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), - QT_GET_SET_PREBUF_TRIG_LVL, 0x40, - buffer_length, 0, NULL, 0, 300); - return result; -} - -/**************************************************************************** - * box_set_atc - TELLS BOX WHEN TO ASSERT automatic transmitter control - ****************************************************************************/ -static int box_set_atc(struct usb_serial *serial, __u16 n_mode) -{ - int result; - __u16 buffer_length; - - buffer_length = PREFUFF_LEVEL_CONSERVATIVE; - - result = - usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), - QT_SET_ATF, 0x40, n_mode, 0, NULL, 0, 300); - - return result; -} - -/** - * qt_set_device - * Issue a SET_DEVICE vendor-specific request on the default control pipe If - * successful returns the number of bytes written, otherwise it returns a - * negative error number of the problem. - */ -static int qt_set_device(struct usb_serial *serial, - struct qt_get_device_data *device_data) -{ - int result; - __u16 length; - __u16 port_settings; - - port_settings = ((__u16) (device_data->portb)); - port_settings = (port_settings << 8); - port_settings += ((__u16) (device_data->porta)); - - length = sizeof(struct qt_get_device_data); - - result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), - QT_SET_GET_DEVICE, 0x40, port_settings, - 0, NULL, 0, 300); - return result; -} - -static int qt_open_channel(struct usb_serial *serial, __u16 uart_num, - struct qt_open_channel_data *pdevice_data) -{ - int result; - - result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), - QT_OPEN_CLOSE_CHANNEL, - USBD_TRANSFER_DIRECTION_IN, 1, uart_num, - pdevice_data, - sizeof(struct qt_open_channel_data), 300); - - return result; - -} - -static int qt_close_channel(struct usb_serial *serial, __u16 uart_num) -{ - int result; - - result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), - QT_OPEN_CLOSE_CHANNEL, - USBD_TRANSFER_DIRECTION_OUT, 0, uart_num, - NULL, 0, 300); - - return result; - -} - -/**************************************************************************** -* box_get_register -* issuse a GET_REGISTER vendor-spcific request on the default control pipe -* If successful, fills in the p_value with the register value asked for -****************************************************************************/ -static int box_get_register(struct usb_serial *serial, unsigned short uart_num, - unsigned short register_num, __u8 *p_value) -{ - int result; - __u16 current_length; - - current_length = sizeof(struct qt_get_device_data); - - result = - usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), - QT_GET_SET_REGISTER, 0xC0, register_num, - uart_num, (void *)p_value, sizeof(*p_value), 300); - - return result; -} - -/**************************************************************************** -* box_set_register -* issuse a GET_REGISTER vendor-spcific request on the default control pipe -* If successful, fills in the p_value with the register value asked for -****************************************************************************/ -static int box_set_register(struct usb_serial *serial, unsigned short uart_num, - unsigned short register_num, unsigned short value) -{ - int result; - unsigned short reg_and_byte; - - reg_and_byte = value; - reg_and_byte = reg_and_byte << 8; - reg_and_byte = reg_and_byte + register_num; - -/* - result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), - QT_GET_SET_REGISTER, 0xC0, register_num, - uart_num, NULL, 0, 300); -*/ - - result = - usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), - QT_GET_SET_REGISTER, 0x40, reg_and_byte, uart_num, - NULL, 0, 300); - - return result; -} - -/* - * qt_setuart - * issues a SET_UART vendor-specific request on the default control pipe - * If successful sets baud rate divisor and LCR value - */ -static int qt_setuart(struct usb_serial *serial, unsigned short uart_num, - unsigned short default_divisor, unsigned char default_lcr) -{ - int result; - unsigned short uart_num_and_lcr; - - uart_num_and_lcr = (default_lcr << 8) + uart_num; - - result = - usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), - QT_GET_SET_UART, 0x40, default_divisor, - uart_num_and_lcr, NULL, 0, 300); - - return result; -} - -static int box_set_hw_flow_ctrl(struct usb_serial *serial, unsigned int index, - int b_set) -{ - __u8 mcr = 0; - __u8 msr = 0, mout_value = 0; - unsigned int status; - - if (b_set == 1) { - /* flow control, box will clear RTS line to prevent remote */ - mcr = SERIAL_MCR_RTS; - } /* device from xmitting more chars */ - else { - /* no flow control to remote device */ - mcr = 0; - - } - mout_value = mcr << 8; - - if (b_set == 1) { - /* flow control, box will inhibit xmit data if CTS line is - * asserted */ - msr = SERIAL_MSR_CTS; - } else { - /* Box will not inhimbe xmit data due to CTS line */ - msr = 0; - } - mout_value |= msr; - - status = - usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), - QT_HW_FLOW_CONTROL_MASK, 0x40, mout_value, - index, NULL, 0, 300); - return status; - -} - -static int box_set_sw_flow_ctrl(struct usb_serial *serial, __u16 index, - unsigned char stop_char, unsigned char start_char) -{ - __u16 n_sw_flow_out; - int result; - - n_sw_flow_out = start_char << 8; - n_sw_flow_out = (unsigned short)stop_char; - - result = - usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), - QT_SW_FLOW_CONTROL_MASK, 0x40, n_sw_flow_out, - index, NULL, 0, 300); - return result; - -} - -static int box_disable_sw_flow_ctrl(struct usb_serial *serial, __u16 index) -{ - int result; - - result = - usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), - QT_SW_FLOW_CONTROL_DISABLE, 0x40, 0, index, - NULL, 0, 300); - return result; - -} - -static int qt_startup(struct usb_serial *serial) -{ - struct device *dev = &serial->dev->dev; - struct usb_serial_port *port; - struct quatech_port *qt_port; - struct qt_get_device_data device_data; - int i; - int status; - - /* Now setup per port private data */ - for (i = 0; i < serial->num_ports; i++) { - port = serial->port[i]; - qt_port = kzalloc(sizeof(*qt_port), GFP_KERNEL); - if (!qt_port) { - for (--i; i >= 0; i--) { - port = serial->port[i]; - kfree(usb_get_serial_port_data(port)); - usb_set_serial_port_data(port, NULL); - } - return -ENOMEM; - } - mutex_init(&qt_port->lock); - - usb_set_serial_port_data(port, qt_port); - - } - - status = qt_get_device(serial, &device_data); - if (status < 0) - goto startup_error; - - dev_dbg(dev, "device_data.portb = 0x%x\n", device_data.portb); - - device_data.portb &= ~FULLPWRBIT; - dev_dbg(dev, "Changing device_data.portb to 0x%x\n", device_data.portb); - - status = qt_set_device(serial, &device_data); - if (status < 0) { - dev_dbg(dev, "qt_set_device failed\n"); - goto startup_error; - } - - status = qt_get_device(serial, &device_data); - if (status < 0) { - dev_dbg(dev, "qt_get_device failed\n"); - goto startup_error; - } - - switch (le16_to_cpu(serial->dev->descriptor.idProduct)) { - case QUATECH_DSU100: - case QUATECH_QSU100: - case QUATECH_ESU100A: - case QUATECH_ESU100B: - case QUATECH_HSU100A: - case QUATECH_HSU100B: - case QUATECH_HSU100C: - case QUATECH_HSU100D: - device_data.porta &= ~(RR_BITS | DUPMODE_BITS); - device_data.porta |= CLKS_X4; - device_data.portb &= ~(LOOPMODE_BITS); - device_data.portb |= RS232_MODE; - break; - - case QUATECH_SSU200: - case QUATECH_DSU200: - case QUATECH_QSU200: - case QUATECH_ESU200A: - case QUATECH_ESU200B: - case QUATECH_HSU200A: - case QUATECH_HSU200B: - case QUATECH_HSU200C: - case QUATECH_HSU200D: - device_data.porta &= ~(RR_BITS | DUPMODE_BITS); - device_data.porta |= CLKS_X4; - device_data.portb &= ~(LOOPMODE_BITS); - device_data.portb |= ALL_LOOPBACK; - break; - default: - device_data.porta &= ~(RR_BITS | DUPMODE_BITS); - device_data.porta |= CLKS_X4; - device_data.portb &= ~(LOOPMODE_BITS); - device_data.portb |= RS232_MODE; - break; - - } - - status = box_set_prebuffer_level(serial); /* sets to - * default value - */ - if (status < 0) { - dev_dbg(dev, "box_set_prebuffer_level failed\n"); - goto startup_error; - } - - status = box_set_atc(serial, ATC_DISABLED); - if (status < 0) { - dev_dbg(dev, "box_set_atc failed\n"); - goto startup_error; - } - - dev_dbg(dev, "device_data.portb = 0x%x\n", device_data.portb); - - device_data.portb |= NEXT_BOARD_POWER_BIT; - dev_dbg(dev, "Changing device_data.portb to 0x%x\n", device_data.portb); - - status = qt_set_device(serial, &device_data); - if (status < 0) { - dev_dbg(dev, "qt_set_device failed\n"); - goto startup_error; - } - - return 0; - -startup_error: - for (i = 0; i < serial->num_ports; i++) { - port = serial->port[i]; - qt_port = qt_get_port_private(port); - kfree(qt_port); - usb_set_serial_port_data(port, NULL); - } - - return -EIO; -} - -static void qt_release(struct usb_serial *serial) -{ - struct usb_serial_port *port; - struct quatech_port *qt_port; - int i; - - for (i = 0; i < serial->num_ports; i++) { - port = serial->port[i]; - if (!port) - continue; - - qt_port = usb_get_serial_port_data(port); - kfree(qt_port); - usb_set_serial_port_data(port, NULL); - } - -} - -static void qt_submit_urb_from_open(struct usb_serial *serial, - struct usb_serial_port *port) -{ - int result; - struct usb_serial_port *port0 = serial->port[0]; - - /* set up interrupt urb */ - usb_fill_int_urb(port0->interrupt_in_urb, - serial->dev, - usb_rcvintpipe(serial->dev, - port0->interrupt_in_endpointAddress), - port0->interrupt_in_buffer, - port0->interrupt_in_urb->transfer_buffer_length, - qt_interrupt_callback, serial, - port0->interrupt_in_urb->interval); - - result = usb_submit_urb(port0->interrupt_in_urb, - GFP_KERNEL); - if (result) { - dev_err(&port->dev, - "%s - Error %d submitting interrupt urb\n", - __func__, result); - } -} - -static int qt_open(struct tty_struct *tty, - struct usb_serial_port *port) -{ - struct usb_serial *serial; - struct quatech_port *quatech_port; - struct quatech_port *port0; - struct qt_open_channel_data channel_data; - - int result; - - if (port_paranoia_check(port, __func__)) - return -ENODEV; - - serial = port->serial; - - if (serial_paranoia_check(serial, __func__)) - return -ENODEV; - - quatech_port = qt_get_port_private(port); - port0 = qt_get_port_private(serial->port[0]); - - if (quatech_port == NULL || port0 == NULL) - return -ENODEV; - - usb_clear_halt(serial->dev, port->write_urb->pipe); - usb_clear_halt(serial->dev, port->read_urb->pipe); - port0->open_ports++; - - result = qt_get_device(serial, &port0->device_data); - - /* Port specific setups */ - result = qt_open_channel(serial, port->port_number, &channel_data); - if (result < 0) { - dev_dbg(&port->dev, "qt_open_channel failed\n"); - return result; - } - dev_dbg(&port->dev, "qt_open_channel completed.\n"); - -/* FIXME: are these needed? Does it even do anything useful? */ - quatech_port->shadow_lsr = channel_data.line_status & - (SERIAL_LSR_OE | SERIAL_LSR_PE | SERIAL_LSR_FE | SERIAL_LSR_BI); - - quatech_port->shadow_msr = channel_data.modem_status & - (SERIAL_MSR_CTS | SERIAL_MSR_DSR | SERIAL_MSR_RI | SERIAL_MSR_CD); - - /* Set Baud rate to default and turn off (default)flow control here */ - result = qt_setuart(serial, port->port_number, DEFAULT_DIVISOR, - DEFAULT_LCR); - if (result < 0) { - dev_dbg(&port->dev, "qt_setuart failed\n"); - return result; - } - dev_dbg(&port->dev, "qt_setuart completed.\n"); - - /* - * Put this here to make it responsive to stty and defaults set by - * the tty layer - */ - - /* Check to see if we've set up our endpoint info yet */ - if (port0->open_ports == 1) { - if (serial->port[0]->interrupt_in_buffer == NULL) - qt_submit_urb_from_open(serial, port); - } - - dev_dbg(&port->dev, "minor number is %d\n", port->minor); - dev_dbg(&port->dev, - "Bulkin endpoint is %d\n", port->bulk_in_endpointAddress); - dev_dbg(&port->dev, - "BulkOut endpoint is %d\n", port->bulk_out_endpointAddress); - dev_dbg(&port->dev, "Interrupt endpoint is %d\n", - port->interrupt_in_endpointAddress); - dev_dbg(&port->dev, "port's number in the device is %d\n", - quatech_port->port_num); - quatech_port->read_urb = port->read_urb; - - /* set up our bulk in urb */ - - usb_fill_bulk_urb(quatech_port->read_urb, - serial->dev, - usb_rcvbulkpipe(serial->dev, - port->bulk_in_endpointAddress), - port->bulk_in_buffer, - quatech_port->read_urb->transfer_buffer_length, - qt_read_bulk_callback, quatech_port); - - dev_dbg(&port->dev, "qt_open: bulkin endpoint is %d\n", - port->bulk_in_endpointAddress); - quatech_port->read_urb_busy = true; - result = usb_submit_urb(quatech_port->read_urb, GFP_KERNEL); - if (result) { - dev_err(&port->dev, - "%s - Error %d submitting control urb\n", - __func__, result); - quatech_port->read_urb_busy = false; - } - - /* initialize our wait queues */ - init_waitqueue_head(&quatech_port->wait); - init_waitqueue_head(&quatech_port->msr_wait); - - /* initialize our icount structure */ - memset(&(quatech_port->icount), 0x00, sizeof(quatech_port->icount)); - - return 0; - -} - -static int qt_chars_in_buffer(struct tty_struct *tty) -{ - struct usb_serial_port *port = tty->driver_data; - struct usb_serial *serial; - int chars = 0; - - serial = get_usb_serial(port, __func__); - - if (serial->num_bulk_out) { - if (port->write_urb->status == -EINPROGRESS) - chars = port->write_urb->transfer_buffer_length; - } - - return chars; -} - -static void qt_block_until_empty(struct tty_struct *tty, - struct quatech_port *qt_port) -{ - int timeout = HZ / 10; - int wait = 30; - - /* returns if we get a signal, an error, or the buffer is empty */ - while (wait_event_interruptible_timeout(qt_port->wait, - qt_chars_in_buffer(tty) <= 0, - timeout) == 0) { - wait--; - if (wait == 0) { - dev_dbg(&qt_port->port->dev, "%s - TIMEOUT", __func__); - return; - } - wait = 30; - } -} - -static void qt_close(struct usb_serial_port *port) -{ - struct usb_serial *serial = port->serial; - struct tty_struct *tty = tty_port_tty_get(&port->port); - unsigned int index = port->port_number; - struct quatech_port *qt_port = qt_get_port_private(port); - struct quatech_port *port0 = qt_get_port_private(serial->port[0]); - - /* shutdown any bulk reads that might be going on */ - if (serial->num_bulk_out) - usb_unlink_urb(port->write_urb); - if (serial->num_bulk_in) - usb_unlink_urb(port->read_urb); - - /* wait up to for transmitter to empty */ - if (serial->dev) - qt_block_until_empty(tty, qt_port); - tty_kref_put(tty); - - /* Close uart channel */ - if (qt_close_channel(serial, index) < 0) - dev_dbg(&port->dev, "%s - qt_close_channel failed.\n", - __func__); - - port0->open_ports--; - - dev_dbg(&port->dev, "qt_num_open_ports in close%d\n", - port0->open_ports); - - if (port0->open_ports == 0) { - if (serial->port[0]->interrupt_in_urb) { - dev_dbg(&port->dev, "Shutdown interrupt_in_urb\n"); - usb_kill_urb(serial->port[0]->interrupt_in_urb); - } - - } - - if (qt_port->write_urb) { - /* if this urb had a transfer buffer already (old tx) free it */ - kfree(qt_port->write_urb->transfer_buffer); - usb_free_urb(qt_port->write_urb); - } - -} - -static int qt_write(struct tty_struct *tty, struct usb_serial_port *port, - const unsigned char *buf, int count) -{ - int result; - struct usb_serial *serial = get_usb_serial(port, __func__); - - if (serial == NULL) - return -ENODEV; - - if (count == 0) { - dev_dbg(&port->dev, - "%s - write request of 0 bytes\n", __func__); - return 0; - } - - /* only do something if we have a bulk out endpoint */ - if (serial->num_bulk_out) { - if (port->write_urb->status == -EINPROGRESS) { - dev_dbg(&port->dev, "%s - already writing\n", __func__); - return 0; - } - - count = - (count > port->bulk_out_size) ? port->bulk_out_size : count; - memcpy(port->write_urb->transfer_buffer, buf, count); - - /* set up our urb */ - - usb_fill_bulk_urb(port->write_urb, serial->dev, - usb_sndbulkpipe(serial->dev, - port-> - bulk_out_endpointAddress), - port->write_urb->transfer_buffer, count, - qt_write_bulk_callback, port); - - /* send the data out the bulk port */ - result = usb_submit_urb(port->write_urb, GFP_ATOMIC); - if (result) - dev_dbg(&port->dev, - "%s - failed submitting write urb, error %d\n", - __func__, result); - else - result = count; - - return result; - } |