diff options
47 files changed, 384 insertions, 194 deletions
diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt index 28a4781ab6d7..0ae06491b430 100644 --- a/Documentation/devicetree/bindings/net/cpsw.txt +++ b/Documentation/devicetree/bindings/net/cpsw.txt @@ -45,13 +45,13 @@ Required properties: Optional properties: - dual_emac_res_vlan : Specifies VID to be used to segregate the ports - mac-address : See ethernet.txt file in the same directory -- phy_id : Specifies slave phy id +- phy_id : Specifies slave phy id (deprecated, use phy-handle) - phy-handle : See ethernet.txt file in the same directory Slave sub-nodes: - fixed-link : See fixed-link.txt file in the same directory - Either the property phy_id, or the sub-node - fixed-link can be specified + +Note: Exactly one of phy_id, phy-handle, or fixed-link must be specified. Note: "ti,hwmods" field is used to fetch the base address and irq resources from TI, omap hwmod data base during device registration. diff --git a/Documentation/networking/altera_tse.txt b/Documentation/networking/altera_tse.txt index 3f24df8c6e65..50b8589d12fd 100644 --- a/Documentation/networking/altera_tse.txt +++ b/Documentation/networking/altera_tse.txt @@ -6,7 +6,7 @@ This is the driver for the Altera Triple-Speed Ethernet (TSE) controllers using the SGDMA and MSGDMA soft DMA IP components. The driver uses the platform bus to obtain component resources. The designs used to test this driver were built for a Cyclone(R) V SOC FPGA board, a Cyclone(R) V FPGA board, -and tested with ARM and NIOS processor hosts seperately. The anticipated use +and tested with ARM and NIOS processor hosts separately. The anticipated use cases are simple communications between an embedded system and an external peer for status and simple configuration of the embedded system. @@ -65,14 +65,14 @@ Driver parameters can be also passed in command line by using: 4.1) Transmit process When the driver's transmit routine is called by the kernel, it sets up a transmit descriptor by calling the underlying DMA transmit routine (SGDMA or -MSGDMA), and initites a transmit operation. Once the transmit is complete, an +MSGDMA), and initiates a transmit operation. Once the transmit is complete, an interrupt is driven by the transmit DMA logic. The driver handles the transmit completion in the context of the interrupt handling chain by recycling resource required to send and track the requested transmit operation. 4.2) Receive process The driver will post receive buffers to the receive DMA logic during driver -intialization. Receive buffers may or may not be queued depending upon the +initialization. Receive buffers may or may not be queued depending upon the underlying DMA logic (MSGDMA is able queue receive buffers, SGDMA is not able to queue receive buffers to the SGDMA receive logic). When a packet is received, the DMA logic generates an interrupt. The driver handles a receive diff --git a/Documentation/networking/ipvlan.txt b/Documentation/networking/ipvlan.txt index cf996394e466..14422f8fcdc4 100644 --- a/Documentation/networking/ipvlan.txt +++ b/Documentation/networking/ipvlan.txt @@ -8,7 +8,7 @@ Initial Release: This is conceptually very similar to the macvlan driver with one major exception of using L3 for mux-ing /demux-ing among slaves. This property makes the master device share the L2 with it's slave devices. I have developed this -driver in conjuntion with network namespaces and not sure if there is use case +driver in conjunction with network namespaces and not sure if there is use case outside of it. @@ -42,7 +42,7 @@ out. In this mode the slaves will RX/TX multicast and broadcast (if applicable) as well. 4.2 L3 mode: - In this mode TX processing upto L3 happens on the stack instance attached + In this mode TX processing up to L3 happens on the stack instance attached to the slave device and packets are switched to the stack instance of the master device for the L2 processing and routing from that instance will be used before packets are queued on the outbound device. In this mode the slaves @@ -56,7 +56,7 @@ situations defines your use case then you can choose to use ipvlan - (a) The Linux host that is connected to the external switch / router has policy configured that allows only one mac per port. (b) No of virtual devices created on a master exceed the mac capacity and -puts the NIC in promiscous mode and degraded performance is a concern. +puts the NIC in promiscuous mode and degraded performance is a concern. (c) If the slave device is to be put into the hostile / untrusted network namespace where L2 on the slave could be changed / misused. diff --git a/Documentation/networking/pktgen.txt b/Documentation/networking/pktgen.txt index f4be85e96005..2c4e3354e128 100644 --- a/Documentation/networking/pktgen.txt +++ b/Documentation/networking/pktgen.txt @@ -67,12 +67,12 @@ The two basic thread commands are: * add_device DEVICE@NAME -- adds a single device * rem_device_all -- remove all associated devices -When adding a device to a thread, a corrosponding procfile is created +When adding a device to a thread, a corresponding procfile is created which is used for configuring this device. Thus, device names need to be unique. To support adding the same device to multiple threads, which is useful -with multi queue NICs, a the device naming scheme is extended with "@": +with multi queue NICs, the device naming scheme is extended with "@": device@something The part after "@" can be anything, but it is custom to use the thread @@ -221,7 +221,7 @@ Sample scripts A collection of tutorial scripts and helpers for pktgen is in the samples/pktgen directory. The helper parameters.sh file support easy -and consistant parameter parsing across the sample scripts. +and consistent parameter parsing across the sample scripts. Usage example and help: ./pktgen_sample01_simple.sh -i eth4 -m 00:1B:21:3C:9D:F8 -d 192.168.8.2 diff --git a/Documentation/networking/vrf.txt b/Documentation/networking/vrf.txt index d52aa10cfe91..5da679c573d2 100644 --- a/Documentation/networking/vrf.txt +++ b/Documentation/networking/vrf.txt @@ -41,7 +41,7 @@ using an rx_handler which gives the impression that packets flow through the VRF device. Similarly on egress routing rules are used to send packets to the VRF device driver before getting sent out the actual interface. This allows tcpdump on a VRF device to capture all packets into and out of the -VRF as a whole.[1] Similiarly, netfilter [2] and tc rules can be applied +VRF as a whole.[1] Similarly, netfilter [2] and tc rules can be applied using the VRF device to specify rules that apply to the VRF domain as a whole. [1] Packets in the forwarded state do not flow through the device, so those diff --git a/Documentation/networking/xfrm_sync.txt b/Documentation/networking/xfrm_sync.txt index d7aac9dedeb4..8d88e0f2ec49 100644 --- a/Documentation/networking/xfrm_sync.txt +++ b/Documentation/networking/xfrm_sync.txt @@ -4,7 +4,7 @@ Krisztian <hidden@balabit.hu> and others and additional patches from Jamal <hadi@cyberus.ca>. The end goal for syncing is to be able to insert attributes + generate -events so that the an SA can be safely moved from one machine to another +events so that the SA can be safely moved from one machine to another for HA purposes. The idea is to synchronize the SA so that the takeover machine can do the processing of the SA as accurate as possible if it has access to it. @@ -13,7 +13,7 @@ We already have the ability to generate SA add/del/upd events. These patches add ability to sync and have accurate lifetime byte (to ensure proper decay of SAs) and replay counters to avoid replay attacks with as minimal loss at failover time. -This way a backup stays as closely uptodate as an active member. +This way a backup stays as closely up-to-date as an active member. Because the above items change for every packet the SA receives, it is possible for a lot of the events to be generated. @@ -163,7 +163,7 @@ If you have an SA that is getting hit by traffic in bursts such that there is a period where the timer threshold expires with no packets seen, then an odd behavior is seen as follows: The first packet arrival after a timer expiry will trigger a timeout -aevent; i.e we dont wait for a timeout period or a packet threshold +event; i.e we don't wait for a timeout period or a packet threshold to be reached. This is done for simplicity and efficiency reasons. -JHS diff --git a/MAINTAINERS b/MAINTAINERS index 42e65d128d01..e7fa426434e2 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4903,7 +4903,7 @@ F: net/ipv4/gre_offload.c F: include/net/gre.h GRETH 10/100/1G Ethernet MAC device driver -M: Kristoffer Glembo <kristoffer@gaisler.com> +M: Andreas Larsson <andreas@gaisler.com> L: netdev@vger.kernel.org S: Maintained F: drivers/net/ethernet/aeroflex/ @@ -10014,7 +10014,8 @@ F: drivers/infiniband/hw/ocrdma/ SFC NETWORK DRIVER M: Solarflare linux maintainers <linux-net-drivers@solarflare.com> -M: Shradha Shah <sshah@solarflare.com> +M: Edward Cree <ecree@solarflare.com> +M: Bert Kenward <bkenward@solarflare.com> L: netdev@vger.kernel.org S: Supported F: drivers/net/ethernet/sfc/ diff --git a/drivers/net/dsa/mv88e6xxx.c b/drivers/net/dsa/mv88e6xxx.c index a2904029cccc..5e572b3510b9 100644 --- a/drivers/net/dsa/mv88e6xxx.c +++ b/drivers/net/dsa/mv88e6xxx.c @@ -2181,7 +2181,7 @@ int mv88e6xxx_port_bridge_join(struct dsa_switch *ds, int port, struct net_device *bridge) { struct mv88e6xxx_priv_state *ps = ds_to_priv(ds); - int i, err; + int i, err = 0; mutex_lock(&ps->smi_mutex); diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index 12a009d720cd..72eb29ed0359 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -581,12 +581,30 @@ static inline int bnxt_alloc_rx_page(struct bnxt *bp, struct page *page; dma_addr_t mapping; u16 sw_prod = rxr->rx_sw_agg_prod; + unsigned int offset = 0; - page = alloc_page(gfp); - if (!page) - return -ENOMEM; + if (PAGE_SIZE > BNXT_RX_PAGE_SIZE) { + page = rxr->rx_page; + if (!page) { + page = alloc_page(gfp); + if (!page) + return -ENOMEM; + rxr->rx_page = page; + rxr->rx_page_offset = 0; + } + offset = rxr->rx_page_offset; + rxr->rx_page_offset += BNXT_RX_PAGE_SIZE; + if (rxr->rx_page_offset == PAGE_SIZE) + rxr->rx_page = NULL; + else + get_page(page); + } else { + page = alloc_page(gfp); + if (!page) + return -ENOMEM; + } - mapping = dma_map_page(&pdev->dev, page, 0, PAGE_SIZE, + mapping = dma_map_page(&pdev->dev, page, offset, BNXT_RX_PAGE_SIZE, PCI_DMA_FROMDEVICE); if (dma_mapping_error(&pdev->dev, mapping)) { __free_page(page); @@ -601,6 +619,7 @@ static inline int bnxt_alloc_rx_page(struct bnxt *bp, rxr->rx_sw_agg_prod = NEXT_RX_AGG(sw_prod); rx_agg_buf->page = page; + rx_agg_buf->offset = offset; rx_agg_buf->mapping = mapping; rxbd->rx_bd_haddr = cpu_to_le64(mapping); rxbd->rx_bd_opaque = sw_prod; @@ -642,6 +661,7 @@ static void bnxt_reuse_rx_agg_bufs(struct bnxt_napi *bnapi, u16 cp_cons, page = cons_rx_buf->page; cons_rx_buf->page = NULL; prod_rx_buf->page = page; + prod_rx_buf->offset = cons_rx_buf->offset; prod_rx_buf->mapping = cons_rx_buf->mapping; @@ -709,7 +729,8 @@ static struct sk_buff *bnxt_rx_pages(struct bnxt *bp, struct bnxt_napi *bnapi, RX_AGG_CMP_LEN) >> RX_AGG_CMP_LEN_SHIFT; cons_rx_buf = &rxr->rx_agg_ring[cons]; - skb_fill_page_desc(skb, i, cons_rx_buf->page, 0, frag_len); + skb_fill_page_desc(skb, i, cons_rx_buf->page, + cons_rx_buf->offset, frag_len); __clear_bit(cons, rxr->rx_agg_bmap); /* It is possible for bnxt_alloc_rx_page() to allocate @@ -740,7 +761,7 @@ static struct sk_buff *bnxt_rx_pages(struct bnxt *bp, struct bnxt_napi *bnapi, return NULL; } - dma_unmap_page(&pdev->dev, mapping, PAGE_SIZE, + dma_unmap_page(&pdev->dev, mapping, BNXT_RX_PAGE_SIZE, PCI_DMA_FROMDEVICE); skb->data_len += frag_len; @@ -1584,13 +1605,17 @@ static void bnxt_free_rx_skbs(struct bnxt *bp) dma_unmap_page(&pdev->dev, dma_unmap_addr(rx_agg_buf, mapping), - PAGE_SIZE, PCI_DMA_FROMDEVICE); + BNXT_RX_PAGE_SIZE, PCI_DMA_FROMDEVICE); rx_agg_buf->page = NULL; __clear_bit(j, rxr->rx_agg_bmap); __free_page(page); } + if (rxr->rx_page) { + __free_page(rxr->rx_page); + rxr->rx_page = NULL; + } } } @@ -1973,7 +1998,7 @@ static int bnxt_init_one_rx_ring(struct bnxt *bp, int ring_nr) if (!(bp->flags & BNXT_FLAG_AGG_RINGS)) return 0; - type = ((u32)PAGE_SIZE << RX_BD_LEN_SHIFT) | + type = ((u32)BNXT_RX_PAGE_SIZE << RX_BD_LEN_SHIFT) | RX_BD_TYPE_RX_AGG_BD | RX_BD_FLAGS_SOP; bnxt_init_rxbd_pages(ring, type); @@ -2164,7 +2189,7 @@ void bnxt_set_ring_params(struct bnxt *bp) bp->rx_agg_nr_pages = 0; if (bp->flags & BNXT_FLAG_TPA) - agg_factor = 4; + agg_factor = min_t(u32, 4, 65536 / BNXT_RX_PAGE_SIZE); bp->flags &= ~BNXT_FLAG_JUMBO; if (rx_space > PAGE_SIZE) { @@ -3020,12 +3045,12 @@ static int bnxt_hwrm_vnic_set_tpa(struct bnxt *bp, u16 vnic_id, u32 tpa_flags) /* Number of segs are log2 units, and first packet is not * included as part of this units. */ - if (mss <= PAGE_SIZE) { - n = PAGE_SIZE / mss; + if (mss <= BNXT_RX_PAGE_SIZE) { + n = BNXT_RX_PAGE_SIZE / mss; nsegs = (MAX_SKB_FRAGS - 1) * n; } else { - n = mss / PAGE_SIZE; - if (mss & (PAGE_SIZE - 1)) + n = mss / BNXT_RX_PAGE_SIZE; + if (mss & (BNXT_RX_PAGE_SIZE - 1)) n++; nsegs = (MAX_SKB_FRAGS - n) / n; } @@ -4309,7 +4334,7 @@ static int bnxt_setup_int_mode(struct bnxt *bp) if (bp->flags & BNXT_FLAG_MSIX_CAP) rc = bnxt_setup_msix(bp); - if (!(bp->flags & BNXT_FLAG_USING_MSIX)) { + if (!(bp->flags & BNXT_FLAG_USING_MSIX) && BNXT_PF(bp)) { /* fallback to INTA */ rc = bnxt_setup_inta(bp); } diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h index 709b95b8fcba..8b823ff558ff 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h @@ -407,6 +407,15 @@ struct rx_tpa_end_cmp_ext { #define BNXT_PAGE_SIZE (1 << BNXT_PAGE_SHIFT) +/* The RXBD length is 16-bit so we can only support page sizes < 64K */ +#if (PAGE_SHIFT > 15) +#define BNXT_RX_PAGE_SHIFT 15 +#else +#define BNXT_RX_PAGE_SHIFT PAGE_SHIFT +#endif + +#define BNXT_RX_PAGE_SIZE (1 << BNXT_RX_PAGE_SHIFT) + #define BNXT_MIN_PKT_SIZE 45 #define BNXT_NUM_TESTS(bp) 0 @@ -506,6 +515,7 @@ struct bnxt_sw_rx_bd { struct bnxt_sw_rx_agg_bd { struct page *page; + unsigned int offset; dma_addr_t mapping; }; @@ -586,6 +596,9 @@ struct bnxt_rx_ring_info { unsigned long *rx_agg_bmap; u16 rx_agg_bmap_size; + struct page *rx_page; + unsigned int rx_page_offset; + dma_addr_t rx_desc_mapping[MAX_RX_PAGES]; dma_addr_t rx_agg_desc_mapping[MAX_RX_AGG_PAGES]; diff --git a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c index 60908eab3b3a..43da891fab97 100644 --- a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c +++ b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c @@ -576,7 +576,7 @@ static void setup_rss(struct adapter *adap) unsigned int nq0 = adap2pinfo(adap, 0)->nqsets; unsigned int nq1 = adap->port[1] ? adap2pinfo(adap, 1)->nqsets : 1; u8 cpus[SGE_QSETS + 1]; - u16 rspq_map[RSS_TABLE_SIZE]; + u16 rspq_map[RSS_TABLE_SIZE + 1]; for (i = 0; i < SGE_QSETS; ++i) cpus[i] = i; @@ -586,6 +586,7 @@ static void setup_rss(struct adapter *adap) rspq_map[i] = i % nq0; rspq_map[i + RSS_TABLE_SIZE / 2] = (i % nq1) + nq0; } + rspq_map[RSS_TABLE_SIZE] = 0xffff; /* terminator */ t3_config_rss(adap, F_RQFEEDBACKENABLE | F_TNLLKPEN | F_TNLMAPEN | F_TNLPRTEN | F_TNL2TUPEN | F_TNL4TUPEN | diff --git a/drivers/net/ethernet/myricom/myri10ge/myri10ge.c b/drivers/net/ethernet/myricom/myri10ge/myri10ge.c index 270c9eeb7ab6..6d1a956e3f77 100644 --- a/drivers/net/ethernet/myricom/myri10ge/myri10ge.c +++ b/drivers/net/ethernet/myricom/myri10ge/myri10ge.c @@ -2668,9 +2668,9 @@ static int myri10ge_close(struct net_device *dev) del_timer_sync(&mgp->watchdog_timer); mgp->running = MYRI10GE_ETH_STOPPING; - local_bh_disable(); /* myri10ge_ss_lock_napi needs bh disabled */ for (i = 0; i < mgp->num_slices; i++) { napi_disable(&mgp->ss[i].napi); + local_bh_disable(); /* myri10ge_ss_lock_napi needs this */ /* Lock the slice to prevent the busy_poll handler from * accessing it. Later when we bring the NIC up, myri10ge_open * resets the slice including this lock. @@ -2679,8 +2679,8 @@ static int myri10ge_close(struct net_device *dev) pr_info("Slice %d locked\n", i); mdelay(1); } + local_bh_enable(); } - local_bh_enable(); netif_carrier_off(dev); netif_tx_stop_all_queues(dev); diff --git a/drivers/net/ethernet/sfc/ef10.c b/drivers/net/ethernet/sfc/ef10.c index 98d33d462c6c..1681084cc96f 100644 --- a/drivers/net/ethernet/sfc/ef10.c +++ b/drivers/net/ethernet/sfc/ef10.c @@ -1920,6 +1920,10 @@ static int efx_ef10_alloc_rss_context(struct efx_nic *efx, u32 *context, return 0; } + if (nic_data->datapath_caps & + 1 << MC_CMD_GET_CAPABILITIES_OUT_RX_RSS_LIMITED_LBN) + return -EOPNOTSUPP; + MCDI_SET_DWORD(inbuf, RSS_CONTEXT_ALLOC_IN_UPSTREAM_PORT_ID, nic_data->vport_id); MCDI_SET_DWORD(inbuf, RSS_CONTEXT_ALLOC_IN_TYPE, alloc_type); @@ -2923,9 +2927,16 @@ static void efx_ef10_filter_push_prep(struct efx_nic *efx, bool replacing) { struct efx_ef10_nic_data *nic_data = efx->nic_data; + u32 flags = spec->flags; memset(inbuf, 0, MC_CMD_FILTER_OP_IN_LEN); + /* Remove RSS flag if we don't have an RSS context. */ + if (flags & EFX_FILTER_FLAG_RX_RSS && + spec->rss_context == EFX_FILTER_RSS_CONTEXT_DEFAULT && + nic_data->rx_rss_context == EFX_EF10_RSS_CONTEXT_INVALID) + flags &= ~EFX_FILTER_FLAG_RX_RSS; + if (replacing) { MCDI_SET_DWORD(inbuf, FILTER_OP_IN_OP, MC_CMD_FILTER_OP_IN_OP_REPLACE); @@ -2985,10 +2996,10 @@ static void efx_ef10_filter_push_prep(struct efx_nic *efx, spec->dmaq_id == EFX_FILTER_RX_DMAQ_ID_DROP ? 0 : spec->dmaq_id); MCDI_SET_DWORD(inbuf, FILTER_OP_IN_RX_MODE, - (spec->flags & EFX_FILTER_FLAG_RX_RSS) ? + (flags & EFX_FILTER_FLAG_RX_RSS) ? MC_CMD_FILTER_OP_IN_RX_MODE_RSS : MC_CMD_FILTER_OP_IN_RX_MODE_SIMPLE); - if (spec->flags & EFX_FILTER_FLAG_RX_RSS) + if (flags & EFX_FILTER_FLAG_RX_RSS) MCDI_SET_DWORD(inbuf, FILTER_OP_IN_RX_CONTEXT, spec->rss_context != EFX_FILTER_RSS_CONTEXT_DEFAULT ? diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index bbb77cd8ad67..e2fcdf1eec44 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -367,7 +367,6 @@ struct cpsw_priv { spinlock_t lock; struct platform_device *pdev; struct net_device *ndev; - struct device_node *phy_node; struct napi_struct napi_rx; struct napi_struct napi_tx; struct device *dev; @@ -1148,25 +1147,34 @@ static void cpsw_slave_open(struct cpsw_slave *slave, struct cpsw_priv *priv) cpsw_ale_add_mcast(priv->ale, priv->ndev->broadcast, 1 << slave_port, 0, 0, ALE_MCAST_FWD_2); - if (priv->phy_node) - slave->phy = of_phy_connect(priv->ndev, priv->phy_node, + if (slave->data->phy_node) { + slave->phy = of_phy_connect(priv->ndev, slave->data->phy_node, &cpsw_adjust_link, 0, slave->data->phy_if); - else + if (!slave->phy) { + dev_err(priv->dev, "phy \"%s\" not found on slave %d\n", + slave->data->phy_node->full_name, + slave->slave_num); + return; + } + } else { slave->phy = phy_connect(priv->ndev, slave->data->phy_id, &cpsw_adjust_link, slave->data->phy_if); - if (IS_ERR(slave->phy)) { - dev_err(priv->dev, "phy %s not found on slave %d\n", - slave->data->phy_id, slave->slave_num); - slave->phy = NULL; - } else { - phy_attached_info(slave->phy); + if (IS_ERR(slave->phy)) { + dev_err(priv->dev, + "phy \"%s\" not found on slave %d, err %ld\n", + slave->data->phy_id, slave->slave_num, + PTR_ERR(slave->phy)); + slave->phy = NULL; + return; + } + } - phy_start(slave->phy); + phy_attached_info(slave->phy); - /* Configure GMII_SEL register */ - cpsw_phy_sel(&priv->pdev->dev, slave->phy->interface, - slave->slave_num); - } + phy_start(slave->phy); + + /* Configure GMII_SEL register */ + cpsw_phy_sel(&priv->pdev->dev, slave->phy->interface, slave->slave_num); } static inline void cpsw_add_default_vlan(struct cpsw_priv *priv) @@ -1940,12 +1948,11 @@ static void cpsw_slave_init(struct cpsw_slave *slave, struct cpsw_priv *priv, slave->port_vlan = data->dual_emac_res_vlan; } -static int cpsw_probe_dt(struct cpsw_priv *priv, +static int cpsw_probe_dt(struct cpsw_platform_data *data, struct platform_device *pdev) { struct device_node *node = pdev->dev.of_node; struct device_node *slave_node; - struct cpsw_platform_data *data = &priv->data; int i = 0, ret; u32 prop; @@ -2033,25 +2040,21 @@ static int cpsw_probe_dt(struct cpsw_priv *priv, if (strcmp(slave_node->name, "slave")) continue; - priv->phy_node = of_parse_phandle(slave_node, "phy-handle", 0); + slave_data->phy_node = of_parse_phandle(slave_node, + "phy-handle", 0); parp = of_get_property(slave_node, "phy_id", &lenp); - if (of_phy_is_fixed_link(slave_node)) { - struct device_node *phy_node; - struct phy_device *phy_dev; - + if (slave_data->phy_node) { + dev_dbg(&pdev->dev, + "slave[%d] using phy-handle=\"%s\"\n", + i, slave_data->phy_node->full_name); + } else if (of_phy_is_fixed_link(slave_node)) { /* In the case of a fixed PHY, the DT node associated * to the PHY is the Ethernet MAC DT node. */ ret = of_phy_register_fixed_link(slave_node); if (ret) return ret; - phy_node = of_node_get(slave_node); - phy_dev = of_phy_find_device(phy_node); - if (!phy_dev) - return -ENODEV; - snprintf(slave_data->phy_id, sizeof(slave_data->phy_id), - PHY_ID_FMT, phy_dev->mdio.bus->id, - phy_dev->mdio.addr); + slave_data->phy_node = of_node_get(slave_node); } else if (parp) { u32 phyid; struct device_node *mdio_node; @@ -2072,7 +2075,9 @@ static int cpsw_probe_dt(struct cpsw_priv *priv, snprintf(slave_data->phy_id, sizeof(slave_data->phy_id), PHY_ID_FMT, mdio->name, phyid); } else { - dev_err(&pdev->dev, "No slave[%d] phy_id or fixed-link property\n", i); + dev_err(&pdev->dev, + "No slave[%d] phy_id, phy-handle, or fixed-link property\n", + i); goto no_phy_slave; } slave_data->phy_if = of_get_phy_mode(slave_node); @@ -2275,7 +2280,7 @@ static int cpsw_probe(struct platform_device *pdev) /* Select default pin state */ pinctrl_pm_select_default_state(&pdev->dev); - if (cpsw_probe_dt(priv, pdev)) { + if (cpsw_probe_dt(&priv->data, pdev)) { dev_err(&pdev->dev, "cpsw: platform data missing\n"); ret = -ENODEV; goto clean_runtime_disable_ret; diff --git a/drivers/net/ethernet/ti/cpsw.h b/drivers/net/ethernet/ti/cpsw.h index 442a7038e660..e50afd1b2eda 100644 --- a/drivers/net/ethernet/ti/cpsw.h +++ b/drivers/net/ethernet/ti/cpsw.h @@ - |