diff options
26 files changed, 3107 insertions, 372 deletions
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 2c9a030c5595..63d68cf908af 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -275,3 +275,30 @@ static int __init omap1_init_devices(void) } arch_initcall(omap1_init_devices); +#if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE) + +static struct resource wdt_resources[] = { + { + .start = 0xfffeb000, + .end = 0xfffeb07F, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device omap_wdt_device = { + .name = "omap_wdt", + .id = -1, + .num_resources = ARRAY_SIZE(wdt_resources), + .resource = wdt_resources, +}; + +static int __init omap_init_wdt(void) +{ + if (!cpu_is_omap16xx()) + return; + + platform_device_register(&omap_wdt_device); + return 0; +} +subsys_initcall(omap_init_wdt); +#endif diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 1c4b2377862b..91dd215d05f0 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -11,9 +11,8 @@ config ARCH_OMAP2PLUS_TYPICAL select PM_RUNTIME select VFP select NEON if ARCH_OMAP3 || ARCH_OMAP4 - select SERIAL_8250 - select SERIAL_CORE_CONSOLE - select SERIAL_8250_CONSOLE + select SERIAL_OMAP + select SERIAL_OMAP_CONSOLE select I2C select I2C_OMAP select MFD @@ -222,12 +221,18 @@ config MACH_OMAP_ZOOM2 depends on ARCH_OMAP3 default y select OMAP_PACKAGE_CBB + select SERIAL_8250 + select SERIAL_CORE_CONSOLE + select SERIAL_8250_CONSOLE config MACH_OMAP_ZOOM3 bool "OMAP3630 Zoom3 board" depends on ARCH_OMAP3 default y select OMAP_PACKAGE_CBP + select SERIAL_8250 + select SERIAL_CORE_CONSOLE + select SERIAL_8250_CONSOLE config MACH_CM_T35 bool "CompuLab CM-T35 module" diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index 2b2e0efd5570..3ef092f839ca 100644 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -208,7 +208,6 @@ static struct flash_partitions sdp_flash_partitions[] = { static void __init omap_sdp_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBP); - omap_serial_init(); zoom_peripherals_init(); board_smc91x_init(); board_flash_init(sdp_flash_partitions, chip_sel_sdp); diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 073fd9b4c36d..239c1f0eb940 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -285,4 +285,5 @@ void __init zoom_peripherals_init(void) omap_i2c_init(); usb_musb_init(&musb_board_data); enable_board_wakeup_source(); + omap_serial_init(); } diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index c73906d17458..ba01ec0cae45 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -2465,6 +2465,16 @@ static struct clk uart3_fck = { .recalc = &followparent_recalc, }; +static struct clk uart4_fck = { + .name = "uart4_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_48m_fck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3630_EN_UART4_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + static struct clk gpt2_fck = { .name = "gpt2_fck", .ops = &clkops_omap2_dflt_wait, @@ -2715,6 +2725,16 @@ static struct clk uart3_ick = { .recalc = &followparent_recalc, }; +static struct clk uart4_ick = { + .name = "uart4_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3630_EN_UART4_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + static struct clk gpt9_ick = { .name = "gpt9_ick", .ops = &clkops_omap2_dflt_wait, @@ -3349,6 +3369,7 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "per_96m_fck", &per_96m_fck, CK_3XXX), CLK(NULL, "per_48m_fck", &per_48m_fck, CK_3XXX), CLK(NULL, "uart3_fck", &uart3_fck, CK_3XXX), + CLK(NULL, "uart4_fck", &uart4_fck, CK_36XX), CLK(NULL, "gpt2_fck", &gpt2_fck, CK_3XXX), CLK(NULL, "gpt3_fck", &gpt3_fck, CK_3XXX), CLK(NULL, "gpt4_fck", &gpt4_fck, CK_3XXX), @@ -3372,6 +3393,7 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "gpio2_ick", &gpio2_ick, CK_3XXX), CLK(NULL, "wdt3_ick", &wdt3_ick, CK_3XXX), CLK(NULL, "uart3_ick", &uart3_ick, CK_3XXX), + CLK(NULL, "uart4_ick", &uart4_ick, CK_36XX), CLK(NULL, "gpt9_ick", &gpt9_ick, CK_3XXX), CLK(NULL, "gpt8_ick", &gpt8_ick, CK_3XXX), CLK(NULL, "gpt7_ick", &gpt7_ick, CK_3XXX), diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h index fe82b79d5f3b..4f959a7d881c 100644 --- a/arch/arm/mach-omap2/cm-regbits-34xx.h +++ b/arch/arm/mach-omap2/cm-regbits-34xx.h @@ -649,6 +649,8 @@ #define OMAP3430_ST_MCBSP2_MASK (1 << 0) /* CM_AUTOIDLE_PER */ +#define OMAP3630_AUTO_UART4_MASK (1 << 18) +#define OMAP3630_AUTO_UART4_SHIFT 18 #define OMAP3430_AUTO_GPIO6_MASK (1 << 17) #define OMAP3430_AUTO_GPIO6_SHIFT 17 #define OMAP3430_AUTO_GPIO5_MASK (1 << 16) diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 9bd4b3452453..5eb0b58b2e95 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -15,6 +15,7 @@ #include <linux/platform_device.h> #include <linux/io.h> #include <linux/clk.h> +#include <linux/err.h> #include <mach/hardware.h> #include <mach/irqs.h> @@ -28,6 +29,8 @@ #include <mach/gpio.h> #include <plat/mmc.h> #include <plat/dma.h> +#include <plat/omap_hwmod.h> +#include <plat/omap_device.h> #include "mux.h" @@ -930,3 +933,39 @@ static int __init omap2_init_devices(void) return 0; } arch_initcall(omap2_init_devices); + +#if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE) +struct omap_device_pm_latency omap_wdt_latency[] = { + [0] = { + .deactivate_func = omap_device_idle_hwmods, + .activate_func = omap_device_enable_hwmods, + .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, + }, +}; + +static int __init omap_init_wdt(void) +{ + int id = -1; + struct omap_device *od; + struct omap_hwmod *oh; + char *oh_name = "wd_timer2"; + char *dev_name = "omap_wdt"; + + if (!cpu_class_is_omap2()) + return 0; + + oh = omap_hwmod_lookup(oh_name); + if (!oh) { + pr_err("Could not look up wd_timer%d hwmod\n", id); + return -EINVAL; + } + + od = omap_device_build(dev_name, id, oh, NULL, 0, + omap_wdt_latency, + ARRAY_SIZE(omap_wdt_latency), 0); + WARN(IS_ERR(od), "Cant build omap_device for %s:%s.\n", + dev_name, oh->name); + return 0; +} +subsys_initcall(omap_init_wdt); +#endif diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index 3cc768e8bc04..adf6e3632a2b 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -15,10 +15,12 @@ #include <mach/irqs.h> #include <plat/cpu.h> #include <plat/dma.h> +#include <plat/serial.h> #include "omap_hwmod_common_data.h" #include "prm-regbits-24xx.h" +#include "cm-regbits-24xx.h" /* * OMAP2420 hardware module integration data @@ -33,6 +35,7 @@ static struct omap_hwmod omap2420_mpu_hwmod; static struct omap_hwmod omap2420_iva_hwmod; static struct omap_hwmod omap2420_l3_main_hwmod; static struct omap_hwmod omap2420_l4_core_hwmod; +static struct omap_hwmod omap2420_wd_timer2_hwmod; /* L3 -> L4_CORE interface */ static struct omap_hwmod_ocp_if omap2420_l3_main__l4_core = { @@ -71,6 +74,9 @@ static struct omap_hwmod omap2420_l3_main_hwmod = { }; static struct omap_hwmod omap2420_l4_wkup_hwmod; +static struct omap_hwmod omap2420_uart1_hwmod; +static struct omap_hwmod omap2420_uart2_hwmod; +static struct omap_hwmod omap2420_uart3_hwmod; /* L4_CORE -> L4_WKUP interface */ static struct omap_hwmod_ocp_if omap2420_l4_core__l4_wkup = { @@ -79,6 +85,60 @@ static struct omap_hwmod_ocp_if omap2420_l4_core__l4_wkup = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* L4 CORE -> UART1 interface */ +static struct omap_hwmod_addr_space omap2420_uart1_addr_space[] = { + { + .pa_start = OMAP2_UART1_BASE, + .pa_end = OMAP2_UART1_BASE + SZ_8K - 1, + .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, + }, +}; + +static struct omap_hwmod_ocp_if omap2_l4_core__uart1 = { + .master = &omap2420_l4_core_hwmod, + .slave = &omap2420_uart1_hwmod, + .clk = "uart1_ick", + .addr = omap2420_uart1_addr_space, + .addr_cnt = ARRAY_SIZE(omap2420_uart1_addr_space), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* L4 CORE -> UART2 interface */ +static struct omap_hwmod_addr_space omap2420_uart2_addr_space[] = { + { + .pa_start = OMAP2_UART2_BASE, + .pa_end = OMAP2_UART2_BASE + SZ_1K - 1, + .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, + }, +}; + +static struct omap_hwmod_ocp_if omap2_l4_core__uart2 = { + .master = &omap2420_l4_core_hwmod, + .slave = &omap2420_uart2_hwmod, + .clk = "uart2_ick", + .addr = omap2420_uart2_addr_space, + .addr_cnt = ARRAY_SIZE(omap2420_uart2_addr_space), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* L4 PER -> UART3 interface */ +static struct omap_hwmod_addr_space omap2420_uart3_addr_space[] = { + { + .pa_start = OMAP2_UART3_BASE, + .pa_end = OMAP2_UART3_BASE + SZ_1K - 1, + .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, + }, +}; + +static struct omap_hwmod_ocp_if omap2_l4_core__uart3 = { + .master = &omap2420_l4_core_hwmod, + .slave = &omap2420_uart3_hwmod, + .clk = "uart3_ick", + .addr = omap2420_uart3_addr_space, + .addr_cnt = ARRAY_SIZE(omap2420_uart3_addr_space), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + /* Slave interfaces on the L4_CORE interconnect */ static struct omap_hwmod_ocp_if *omap2420_l4_core_slaves[] = { &omap2420_l3_main__l4_core, @@ -87,6 +147,9 @@ static struct omap_hwmod_ocp_if *omap2420_l4_core_slaves[] = { /* Master interfaces on the L4_CORE interconnect */ static struct omap_hwmod_ocp_if *omap2420_l4_core_masters[] = { &omap2420_l4_core__l4_wkup, + &omap2_l4_core__uart1, + &omap2_l4_core__uart2, + &omap2_l4_core__uart3, }; /* L4 CORE */ @@ -165,12 +228,206 @@ static struct omap_hwmod omap2420_iva_hwmod = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420) }; +/* l4_wkup -> wd_timer2 */ +static struct omap_hwmod_addr_space omap2420_wd_timer2_addrs[] = { + { + .pa_start = 0x48022000, + .pa_end = 0x4802207f, + .flags = ADDR_TYPE_RT + }, +}; + +static struct omap_hwmod_ocp_if omap2420_l4_wkup__wd_timer2 = { + .master = &omap2420_l4_wkup_hwmod, + .slave = &omap2420_wd_timer2_hwmod, + .clk = "mpu_wdt_ick", + .addr = omap2420_wd_timer2_addrs, + .addr_cnt = ARRAY_SIZE(omap2420_wd_timer2_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* + * 'wd_timer' class + * 32-bit watchdog upward counter that generates a pulse on the reset pin on + * overflow condition + */ + +static struct omap_hwmod_class_sysconfig omap2420_wd_timer_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap2420_wd_timer_hwmod_class = { + .name = "wd_timer", + .sysc = &omap2420_wd_timer_sysc, +}; + +/* wd_timer2 */ +static struct omap_hwmod_ocp_if *omap2420_wd_timer2_slaves[] = { + &omap2420_l4_wkup__wd_timer2, +}; + +static struct omap_hwmod omap2420_wd_timer2_hwmod = { + .name = "wd_timer2", + .class = &omap2420_wd_timer_hwmod_class, + .main_clk = "mpu_wdt_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_MPU_WDT_SHIFT, + .module_offs = WKUP_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_MPU_WDT_SHIFT, + }, + }, + .slaves = omap2420_wd_timer2_slaves, + .slaves_cnt = ARRAY_SIZE(omap2420_wd_timer2_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), +}; + +/* UART */ + +static struct omap_hwmod_class_sysconfig uart_sysc = { + .rev_offs = 0x50, + .sysc_offs = 0x54, + .syss_offs = 0x58, + .sysc_flags = (SYSC_HAS_SIDLEMODE | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class uart_class = { + .name = "uart", + .sysc = &uart_sysc, +}; + +/* UART1 */ + +static struct omap_hwmod_irq_info uart1_mpu_irqs[] = { + { .irq = INT_24XX_UART1_IRQ, }, +}; + +static struct omap_hwmod_dma_info uart1_sdma_reqs[] = { + { .name = "rx", .dma_req = OMAP24XX_DMA_UART1_RX, }, + { .name = "tx", .dma_req = OMAP24XX_DMA_UART1_TX, }, +}; + +static struct omap_hwmod_ocp_if *omap2420_uart1_slaves[] = { + &omap2_l4_core__uart1, +}; + +static struct omap_hwmod omap2420_uart1_hwmod = { + .name = "uart1", + .mpu_irqs = uart1_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(uart1_mpu_irqs), + .sdma_reqs = uart1_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(uart1_sdma_reqs), + .main_clk = "uart1_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_UART1_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_EN_UART1_SHIFT, + }, + }, + .slaves = omap2420_uart1_slaves, + .slaves_cnt = ARRAY_SIZE(omap2420_uart1_slaves), + .class = &uart_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), +}; + +/* UART2 */ + +static struct omap_hwmod_irq_info uart2_mpu_irqs[] = { + { .irq = INT_24XX_UART2_IRQ, }, +}; + +static struct omap_hwmod_dma_info uart2_sdma_reqs[] = { + { .name = "rx", .dma_req = OMAP24XX_DMA_UART2_RX, }, + { .name = "tx", .dma_req = OMAP24XX_DMA_UART2_TX, }, +}; + +static struct omap_hwmod_ocp_if *omap2420_uart2_slaves[] = { + &omap2_l4_core__uart2, +}; + +static struct omap_hwmod omap2420_uart2_hwmod = { + .name = "uart2", + .mpu_irqs = uart2_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(uart2_mpu_irqs), + .sdma_reqs = uart2_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(uart2_sdma_reqs), + .main_clk = "uart2_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_UART2_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_EN_UART2_SHIFT, + }, + }, + .slaves = omap2420_uart2_slaves, + .slaves_cnt = ARRAY_SIZE(omap2420_uart2_slaves), + .class = &uart_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), +}; + +/* UART3 */ + +static struct omap_hwmod_irq_info uart3_mpu_irqs[] = { + { .irq = INT_24XX_UART3_IRQ, }, +}; + +static struct omap_hwmod_dma_info uart3_sdma_reqs[] = { + { .name = "rx", .dma_req = OMAP24XX_DMA_UART3_RX, }, + { .name = "tx", .dma_req = OMAP24XX_DMA_UART3_TX, }, +}; + +static struct omap_hwmod_ocp_if *omap2420_uart3_slaves[] = { + &omap2_l4_core__uart3, +}; + +static struct omap_hwmod omap2420_uart3_hwmod = { + .name = "uart3", + .mpu_irqs = uart3_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(uart3_mpu_irqs), + .sdma_reqs = uart3_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(uart3_sdma_reqs), + .main_clk = "uart3_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 2, + .module_bit = OMAP24XX_EN_UART3_SHIFT, + .idlest_reg_id = 2, + .idlest_idle_bit = OMAP24XX_EN_UART3_SHIFT, + }, + }, + .slaves = omap2420_uart3_slaves, + .slaves_cnt = ARRAY_SIZE(omap2420_uart3_slaves), + .class = &uart_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), +}; + static __initdata struct omap_hwmod *omap2420_hwmods[] = { &omap2420_l3_main_hwmod, &omap2420_l4_core_hwmod, &omap2420_l4_wkup_hwmod, &omap2420_mpu_hwmod, &omap2420_iva_hwmod, + &omap2420_wd_timer2_hwmod, + &omap2420_uart1_hwmod, + &omap2420_uart2_hwmod, + &omap2420_uart3_hwmod, NULL, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index 4526628ed287..12d939e456cf 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -15,10 +15,12 @@ #include <mach/irqs.h> #include <plat/cpu.h> #include <plat/dma.h> +#include <plat/serial.h> #include "omap_hwmod_common_data.h" #include "prm-regbits-24xx.h" +#include "cm-regbits-24xx.h" /* * OMAP2430 hardware module integration data @@ -33,6 +35,7 @@ static struct omap_hwmod omap2430_mpu_hwmod; static struct omap_hwmod omap2430_iva_hwmod; static struct omap_hwmod omap2430_l3_main_hwmod; static struct omap_hwmod omap2430_l4_core_hwmod; +static struct omap_hwmod omap2430_wd_timer2_hwmod; /* L3 -> L4_CORE interface */ static struct omap_hwmod_ocp_if omap2430_l3_main__l4_core = { @@ -71,6 +74,9 @@ static struct omap_hwmod omap2430_l3_main_hwmod = { }; static struct omap_hwmod omap2430_l4_wkup_hwmod; +static struct omap_hwmod omap2430_uart1_hwmod; +static struct omap_hwmod omap2430_uart2_hwmod; +static struct omap_hwmod omap2430_uart3_hwmod; /* L4_CORE -> L4_WKUP interface */ static struct omap_hwmod_ocp_if omap2430_l4_core__l4_wkup = { @@ -79,6 +85,60 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__l4_wkup = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* L4 CORE -> UART1 interface */ +static struct omap_hwmod_addr_space omap2430_uart1_addr_space[] = { + { + .pa_start = OMAP2_UART1_BASE, + .pa_end = OMAP2_UART1_BASE + SZ_8K - 1, + .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, + }, +}; + +static struct omap_hwmod_ocp_if omap2_l4_core__uart1 = { + .master = &omap2430_l4_core_hwmod, + .slave = &omap2430_uart1_hwmod, + .clk = "uart1_ick", + .addr = omap2430_uart1_addr_space, + .addr_cnt = ARRAY_SIZE(omap2430_uart1_addr_space), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* L4 CORE -> UART2 interface */ +static struct omap_hwmod_addr_space omap2430_uart2_addr_space[] = { + { + .pa_start = OMAP2_UART2_BASE, + .pa_end = OMAP2_UART2_BASE + SZ_1K - 1, + .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, + }, +}; + +static struct omap_hwmod_ocp_if omap2_l4_core__uart2 = { + .master = &omap2430_l4_core_hwmod, + .slave = &omap2430_uart2_hwmod, + .clk = "uart2_ick", + .addr = omap2430_uart2_addr_space, + .addr_cnt = ARRAY_SIZE(omap2430_uart2_addr_space), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* L4 PER -> UART3 interface */ +static struct omap_hwmod_addr_space omap2430_uart3_addr_space[] = { + { + .pa_start = OMAP2_UART3_BASE, + .pa_end = OMAP2_UART3_BASE + SZ_1K - 1, + .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, + }, +}; + +static struct omap_hwmod_ocp_if omap2_l4_core__uart3 = { + .master = &omap2430_l4_core_hwmod, + .slave = &omap2430_uart3_hwmod, + .clk = "uart3_ick", + .addr = omap2430_uart3_addr_space, + .addr_cnt = ARRAY_SIZE(omap2430_uart3_addr_space), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + /* Slave interfaces on the L4_CORE interconnect */ static struct omap_hwmod_ocp_if *omap2430_l4_core_slaves[] = { &omap2430_l3_main__l4_core, @@ -104,6 +164,9 @@ static struct omap_hwmod omap2430_l4_core_hwmod = { /* Slave interfaces on the L4_WKUP interconnect */ static struct omap_hwmod_ocp_if *omap2430_l4_wkup_slaves[] = { &omap2430_l4_core__l4_wkup, + &omap2_l4_core__uart1, + &omap2_l4_core__uart2, + &omap2_l4_core__uart3, }; /* Master interfaces on the L4_WKUP interconnect */ @@ -165,12 +228,206 @@ static struct omap_hwmod omap2430_iva_hwmod = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) }; +/* l4_wkup -> wd_timer2 */ +static struct omap_hwmod_addr_space omap2430_wd_timer2_addrs[] = { + { + .pa_start = 0x49016000, + .pa_end = 0x4901607f, + .flags = ADDR_TYPE_RT + }, +}; + +static struct omap_hwmod_ocp_if omap2430_l4_wkup__wd_timer2 = { + .master = &omap2430_l4_wkup_hwmod, + .slave = &omap2430_wd_timer2_hwmod, + .clk = "mpu_wdt_ick", + .addr = omap2430_wd_timer2_addrs, + .addr_cnt = ARRAY_SIZE(omap2430_wd_timer2_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* + * 'wd_timer' class + * 32-bit watchdog upward counter that generates a pulse on the reset pin on + * overflow condition + */ + +static struct omap_hwmod_class_sysconfig omap2430_wd_timer_sysc = { + .rev_offs = 0x0, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap2430_wd_timer_hwmod_class = { + .name = "wd_timer", + .sysc = &omap2430_wd_timer_sysc, +}; + +/* wd_timer2 */ +static struct omap_hwmod_ocp_if *omap2430_wd_timer2_slaves[] = { + &omap2430_l4_wkup__wd_timer2, +}; + +static struct omap_hwmod omap2430_wd_timer2_hwmod = { + .name = "wd_timer2", + .class = &omap2430_wd_timer_hwmod_class, + .main_clk = "mpu_wdt_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_MPU_WDT_SHIFT, + .module_offs = WKUP_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_MPU_WDT_SHIFT, + }, + }, + .slaves = omap2430_wd_timer2_slaves, + .slaves_cnt = ARRAY_SIZE(omap2430_wd_timer2_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), +}; + +/* UART */ + +static struct omap_hwmod_class_sysconfig uart_sysc = { + .rev_offs = 0x50, + .sysc_offs = 0x54, + .syss_offs = 0x58, + .sysc_flags = (SYSC_HAS_SIDLEMODE | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class uart_class = { + .name = "uart", + .sysc = &uart_sysc, +}; + +/* UART1 */ + +static struct omap_hwmod_irq_info uart1_mpu_irqs[] = { + { .irq = INT_24XX_UART1_IRQ, }, +}; + +static struct omap_hwmod_dma_info uart1_sdma_reqs[] = { + { .name = "rx", .dma_req = OMAP24XX_DMA_UART1_RX, }, + { .name = "tx", .dma_req = OMAP24XX_DMA_UART1_TX, }, +}; + +static struct omap_hwmod_ocp_if *omap2430_uart1_slaves[] = { + &omap2_l4_core__uart1, +}; + +static struct omap_hwmod omap2430_uart1_hwmod = { + .name = "uart1", + .mpu_irqs = uart1_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(uart1_mpu_irqs), + .sdma_reqs = uart1_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(uart1_sdma_reqs), + .main_clk = "uart1_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_UART1_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_EN_UART1_SHIFT, + }, + }, + .slaves = omap2430_uart1_slaves, + .slaves_cnt = ARRAY_SIZE(omap2430_uart1_slaves), + .class = &uart_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), +}; + +/* UART2 */ + +static struct omap_hwmod_irq_info uart2_mpu_irqs[] = { + { .irq = INT_24XX_UART2_IRQ, }, +}; + +static struct omap_hwmod_dma_info uart2_sdma_reqs[] = { + { .name = "rx", .dma_req = OMAP24XX_DMA_UART2_RX, }, + { .name = "tx", .dma_req = OMAP24XX_DMA_UART2_TX, }, +}; + +static struct omap_hwmod_ocp_if *omap2430_uart2_slaves[] = { + &omap2_l4_core__uart2, +}; + +static struct omap_hwmod omap2430_uart2_hwmod = { + .name = "uart2", + .mpu_irqs = uart2_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(uart2_mpu_irqs), + .sdma_reqs = uart2_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(uart2_sdma_reqs), + .main_clk = "uart2_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_UART2_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_EN_UART2_SHIFT, + }, + }, + .slaves = omap2430_uart2_slaves, + .slaves_cnt = ARRAY_SIZE(omap2430_uart2_slaves), + .class = &uart_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), +}; + +/* UART3 */ + +static struct omap_hwmod_irq_info uart3_mpu_irqs[] = { + { .irq = INT_24XX_UART3_IRQ, }, +}; + +static struct omap_hwmod_dma_info uart3_sdma_reqs[] = { + { .name = "rx", .dma_req = OMAP24XX_DMA_UART3_RX, }, + { .name = "tx", .dma_req = OMAP24XX_DMA_UART3_TX, }, +}; + +static struct omap_hwmod_ocp_if *omap2430_uart3_slaves[] = { + &omap2_l4_core__uart3, +}; + +static struct omap_hwmod omap2430_uart3_hwmod = { + .name = "uart3", + .mpu_irqs = uart3_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(uart3_mpu_irqs), + .sdma_reqs = uart3_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(uart3_sdma_reqs), + .main_clk = "uart3_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 2, + .module_bit = OMAP24XX_EN_UART3_SHIFT, + .idlest_reg_id = 2, + .idlest_idle_bit = OMAP24XX_EN_UART3_SHIFT, + }, + }, + .slaves = omap2430_uart3_slaves, + .slaves_cnt = ARRAY_SIZE(omap2430_uart3_slaves), + .class = &uart_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), +}; + static __initdata struct omap_hwmod *omap2430_hwmods[] = { &omap2430_l3_main_hwmod, &omap2430_l4_core_hwmod, &omap2430_l4_wkup_hwmod, &omap2430_mpu_hwmod, &omap2430_iva_hwmod, + &omap2430_wd_timer2_hwmod, + &omap2430_uart1_hwmod, + &omap2430_uart2_hwmod, + &omap2430_uart3_hwmod, NULL, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 5d8eb58ba5e3..cb97ecf0a3f6 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -17,10 +17,12 @@ #include <mach/irqs.h> #include <plat/cpu.h> #include <plat/dma.h> +#include <plat/serial.h> #include "omap_hwmod_common_data.h" #include "prm-regbits-34xx.h" +#include "cm-regbits-34xx.h" /* * OMAP3xxx hardware module integration data @@ -36,6 +38,7 @@ static struct omap_hwmod omap3xxx_iva_hwmod; static struct omap_hwmod omap3xxx_l3_main_hwmod; static struct omap_hwmod omap3xxx_l4_core_hwmod; static struct omap_hwmod omap3xxx_l4_per_hwmod; +static struct omap_hwmod omap3xxx_wd_timer2_hwmod; /* L3 -> L4_CORE interface */ static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_core = { @@ -82,6 +85,10 @@ static struct omap_hwmod omap3xxx_l3_main_hwmod = { }; static struct omap_hwmod omap3xxx_l4_wkup_hwmod; +static struct omap_hwmod omap3xxx_uart1_hwmod; +static struct omap_hwmod omap3xxx_uart2_hwmod; +static struct omap_hwmod omap3xxx_uart3_hwmod; +static struct omap_hwmod omap3xxx_uart4_hwmod; /* L4_CORE -> L4_WKUP interface */ static struct omap_hwmod_ocp_if omap3xxx_l4_core__l4_wkup = { @@ -90,6 +97,78 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__l4_wkup = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* L4 CORE -> UART1 interface */ +static struct omap_hwmod_addr_space omap3xxx_uart1_addr_space[] = { + { + .pa_start = OMAP3_UART1_BASE, + .pa_end = OMAP3_UART1_BASE + SZ_8K - 1, + .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, + }, +}; + +static struct omap_hwmod_ocp_if omap3_l4_core__uart1 = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_uart1_hwmod, + .clk = "uart1_ick", + .addr = omap3xxx_uart1_addr_space, + .addr_cnt = ARRAY_SIZE(omap3xxx_uart1_addr_space), + |