diff options
33 files changed, 1531 insertions, 171 deletions
diff --git a/Documentation/devicetree/bindings/input/adc-joystick.yaml b/Documentation/devicetree/bindings/input/adc-joystick.yaml new file mode 100644 index 000000000000..054406bbd22b --- /dev/null +++ b/Documentation/devicetree/bindings/input/adc-joystick.yaml @@ -0,0 +1,121 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019-2020 Artur Rojek +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/input/adc-joystick.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: ADC attached joystick + +maintainers: + - Artur Rojek <contact@artur-rojek.eu> + +description: > + Bindings for joystick devices connected to ADC controllers supporting + the Industrial I/O subsystem. + +properties: + compatible: + const: adc-joystick + + io-channels: + minItems: 1 + maxItems: 1024 + description: > + List of phandle and IIO specifier pairs. + Each pair defines one ADC channel to which a joystick axis is connected. + See Documentation/devicetree/bindings/iio/iio-bindings.txt for details. + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +required: + - compatible + - io-channels + - '#address-cells' + - '#size-cells' + +additionalProperties: false + +patternProperties: + "^axis@[0-9a-f]+$": + type: object + description: > + Represents a joystick axis bound to the given ADC channel. + For each entry in the io-channels list, one axis subnode with a matching + reg property must be specified. + + properties: + reg: + minimum: 0 + maximum: 1023 + description: Index of an io-channels list entry bound to this axis. + + linux,code: + $ref: /schemas/types.yaml#/definitions/uint32 + description: EV_ABS specific event code generated by the axis. + + abs-range: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - items: + - description: minimum value + - description: maximum value + description: > + Minimum and maximum values produced by the axis. + For an ABS_X axis this will be the left-most and right-most + inclination of the joystick. If min > max, it is left to userspace to + treat the axis as inverted. + This property is interpreted as two signed 32 bit values. + + abs-fuzz: + $ref: /schemas/types.yaml#/definitions/uint32 + description: > + Amount of noise in the input value. + Omitting this property indicates the axis is precise. + + abs-flat: + $ref: /schemas/types.yaml#/definitions/uint32 + description: > + Axial "deadzone", or area around the center position, where the axis + is considered to be at rest. + Omitting this property indicates the axis always returns to exactly + the center position. + + required: + - reg + - linux,code + - abs-range + + additionalProperties: false + +examples: + - | + #include <dt-bindings/iio/adc/ingenic,adc.h> + #include <dt-bindings/input/input.h> + + joystick: adc-joystick { + compatible = "adc-joystick"; + io-channels = <&adc INGENIC_ADC_TOUCH_XP>, + <&adc INGENIC_ADC_TOUCH_YP>; + #address-cells = <1>; + #size-cells = <0>; + + axis@0 { + reg = <0>; + linux,code = <ABS_X>; + abs-range = <3300 0>; + abs-fuzz = <4>; + abs-flat = <200>; + }; + axis@1 { + reg = <1>; + linux,code = <ABS_Y>; + abs-range = <0 3300>; + abs-fuzz = <4>; + abs-flat = <200>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/zinitix.txt b/Documentation/devicetree/bindings/input/touchscreen/zinitix.txt new file mode 100644 index 000000000000..446efb9f5f55 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/zinitix.txt @@ -0,0 +1,40 @@ +Device tree bindings for Zinitx BT541 touchscreen controller + +Required properties: + + - compatible : Should be "zinitix,bt541" + - reg : I2C address of the chip. Should be 0x20 + - interrupts : Interrupt to which the chip is connected + +Optional properties: + + - vdd-supply : Analog power supply regulator on VCCA pin + - vddo-supply : Digital power supply regulator on VDD pin + - zinitix,mode : Mode of reporting touch points. Some modes may not work + with a particular ts firmware for unknown reasons. Available + modes are 1 and 2. Mode 2 is the default and preferred. + +The touchscreen-* properties are documented in touchscreen.txt in this +directory. + +Example: + + i2c@00000000 { + /* ... */ + + bt541@20 { + compatible = "zinitix,bt541"; + reg = <0x20>; + interrupt-parent = <&msmgpio>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&tsp_default>; + vdd-supply = <®_vdd_tsp>; + vddo-supply = <&pm8916_l6>; + touchscreen-size-x = <540>; + touchscreen-size-y = <960>; + zinitix,mode = <2>; + }; + + /* ... */ + }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index ad38504f4358..07bdfdd7b31c 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -1222,6 +1222,8 @@ patternProperties: description: Shenzhen Zidoo Technology Co., Ltd. "^zii,.*": description: Zodiac Inflight Innovations + "^zinitix,.*": + description: Zinitix Co., Ltd "^zte,.*": description: ZTE Corp. "^zyxel,.*": diff --git a/MAINTAINERS b/MAINTAINERS index f281f8077de0..9f18a1cb7d4b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -16044,6 +16044,13 @@ F: Documentation/fb/sisfb.rst F: drivers/video/fbdev/sis/ F: include/video/sisfb.h +SIS I2C TOUCHSCREEN DRIVER +M: Mika Penttilä <mika.penttila@nextfour.com> +L: linux-input@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/input/touchscreen/sis_i2c.txt +F: drivers/input/touchscreen/sis_i2c.c + SIS USB2VGA DRIVER M: Thomas Winischhofer <thomas@winischhofer.net> S: Maintained diff --git a/drivers/hid/hid-rmi.c b/drivers/hid/hid-rmi.c index 7f41213d5ae3..311eee599ce9 100644 --- a/drivers/hid/hid-rmi.c +++ b/drivers/hid/hid-rmi.c @@ -720,7 +720,7 @@ static int rmi_probe(struct hid_device *hdev, const struct hid_device_id *id) } if (data->device_flags & RMI_DEVICE_HAS_PHYS_BUTTONS) - rmi_hid_pdata.f30_data.disable = true; + rmi_hid_pdata.gpio_data.disable = true; data->xport.dev = hdev->dev.parent; data->xport.pdata = rmi_hid_pdata; diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c index e494295d1c7b..95f90699d2b1 100644 --- a/drivers/input/evdev.c +++ b/drivers/input/evdev.c @@ -28,7 +28,6 @@ struct evdev { int open; struct input_handle handle; - wait_queue_head_t wait; struct evdev_client __rcu *grab; struct list_head client_list; spinlock_t client_lock; /* protects client_list */ @@ -43,6 +42,7 @@ struct evdev_client { unsigned int tail; unsigned int packet_head; /* [future] position of the first element of next packet */ spinlock_t buffer_lock; /* protects access to buffer, head and tail */ + wait_queue_head_t wait; struct fasync_struct *fasync; struct evdev *evdev; struct list_head node; @@ -245,7 +245,6 @@ static void evdev_pass_values(struct evdev_client *client, const struct input_value *vals, unsigned int count, ktime_t *ev_time) { - struct evdev *evdev = client->evdev; const struct input_value *v; struct input_event event; struct timespec64 ts; @@ -282,7 +281,7 @@ static void evdev_pass_values(struct evdev_client *client, spin_unlock(&client->buffer_lock); if (wakeup) - wake_up_interruptible_poll(&evdev->wait, + wake_up_interruptible_poll(&client->wait, EPOLLIN | EPOLLOUT | EPOLLRDNORM | EPOLLWRNORM); } @@ -426,11 +425,11 @@ static void evdev_hangup(struct evdev *evdev) struct evdev_client *client; spin_lock(&evdev->client_lock); - list_for_each_entry(client, &evdev->client_list, node) + list_for_each_entry(client, &evdev->client_list, node) { kill_fasync(&client->fasync, SIGIO, POLL_HUP); + wake_up_interruptible_poll(&client->wait, EPOLLHUP | EPOLLERR); + } spin_unlock(&evdev->client_lock); - - wake_up_interruptible_poll(&evdev->wait, EPOLLHUP | EPOLLERR); } static int evdev_release(struct inode *inode, struct file *file) @@ -479,6 +478,7 @@ static int evdev_open(struct inode *inode, struct file *file) if (!client) return -ENOMEM; + init_waitqueue_head(&client->wait); client->bufsize = bufsize; spin_lock_init(&client->buffer_lock); client->evdev = evdev; @@ -595,7 +595,7 @@ static ssize_t evdev_read(struct file *file, char __user *buffer, break; if (!(file->f_flags & O_NONBLOCK)) { - error = wait_event_interruptible(evdev->wait, + error = wait_event_interruptible(client->wait, client->packet_head != client->tail || !evdev->exist || client->revoked); if (error) @@ -613,7 +613,7 @@ static __poll_t evdev_poll(struct file *file, poll_table *wait) struct evdev *evdev = client->evdev; __poll_t mask; - poll_wait(file, &evdev->wait, wait); + poll_wait(file, &client->wait, wait); if (evdev->exist && !client->revoked) mask = EPOLLOUT | EPOLLWRNORM; @@ -946,7 +946,7 @@ static int evdev_revoke(struct evdev *evdev, struct evdev_client *client, client->revoked = true; evdev_ungrab(evdev, client); input_flush_device(&evdev->handle, file); - wake_up_interruptible_poll(&evdev->wait, EPOLLHUP | EPOLLERR); + wake_up_interruptible_poll(&client->wait, EPOLLHUP | EPOLLERR); return 0; } @@ -1358,7 +1358,6 @@ static int evdev_connect(struct input_handler *handler, struct input_dev *dev, INIT_LIST_HEAD(&evdev->client_list); spin_lock_init(&evdev->client_lock); mutex_init(&evdev->mutex); - init_waitqueue_head(&evdev->wait); evdev->exist = true; dev_no = minor; diff --git a/drivers/input/input-mt.c b/drivers/input/input-mt.c index f699538bdac4..44fe6f2f063c 100644 --- a/drivers/input/input-mt.c +++ b/drivers/input/input-mt.c @@ -323,11 +323,14 @@ static int adjust_dual(int *begin, int step, int *end, int eq, int mu) p = begin + step; s = p == end ? f + 1 : *p; - for (; p != end; p += step) - if (*p < f) - s = f, f = *p; - else if (*p < s) + for (; p != end; p += step) { + if (*p < f) { + s = f; + f = *p; + } else if (*p < s) { s = *p; + } + } c = (f + s + 1) / 2; if (c == 0 || (c > mu && (!eq || mu > 0))) diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig index eb031b7a4866..b080f0cfb068 100644 --- a/drivers/input/joystick/Kconfig +++ b/drivers/input/joystick/Kconfig @@ -42,6 +42,16 @@ config JOYSTICK_A3D To compile this driver as a module, choose M here: the module will be called a3d. +config JOYSTICK_ADC + tristate "Simple joystick connected over ADC" + depends on IIO + select IIO_BUFFER_CB + help + Say Y here if you have a simple joystick connected over ADC. + + To compile this driver as a module, choose M here: the + module will be called adc-joystick. + config JOYSTICK_ADI tristate "Logitech ADI digital joysticks and gamepads" select GAMEPORT diff --git a/drivers/input/joystick/Makefile b/drivers/input/joystick/Makefile index 8656023f6ef5..58232b3057d3 100644 --- a/drivers/input/joystick/Makefile +++ b/drivers/input/joystick/Makefile @@ -6,6 +6,7 @@ # Each configuration option enables a list of files. obj-$(CONFIG_JOYSTICK_A3D) += a3d.o +obj-$(CONFIG_JOYSTICK_ADC) += adc-joystick.o obj-$(CONFIG_JOYSTICK_ADI) += adi.o obj-$(CONFIG_JOYSTICK_AMIGA) += amijoy.o obj-$(CONFIG_JOYSTICK_AS5011) += as5011.o diff --git a/drivers/input/joystick/adc-joystick.c b/drivers/input/joystick/adc-joystick.c new file mode 100644 index 000000000000..78ebca7d400a --- /dev/null +++ b/drivers/input/joystick/adc-joystick.c @@ -0,0 +1,264 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Input driver for joysticks connected over ADC. + * Copyright (c) 2019-2020 Artur Rojek <contact@artur-rojek.eu> + */ +#include <linux/ctype.h> +#include <linux/input.h> +#include <linux/iio/iio.h> +#include <linux/iio/consumer.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/property.h> + +#include <asm/unaligned.h> + +struct adc_joystick_axis { + u32 code; + s32 range[2]; + s32 fuzz; + s32 flat; +}; + +struct adc_joystick { + struct input_dev *input; + struct iio_cb_buffer *buffer; + struct adc_joystick_axis *axes; + struct iio_channel *chans; + int num_chans; +}; + +static int adc_joystick_handle(const void *data, void *private) +{ + struct adc_joystick *joy = private; + enum iio_endian endianness; + int bytes, msb, val, idx, i; + const u16 *data_u16; + bool sign; + + bytes = joy->chans[0].channel->scan_type.storagebits >> 3; + + for (i = 0; i < joy->num_chans; ++i) { + idx = joy->chans[i].channel->scan_index; + endianness = joy->chans[i].channel->scan_type.endianness; + msb = joy->chans[i].channel->scan_type.realbits - 1; + sign = tolower(joy->chans[i].channel->scan_type.sign) == 's'; + + switch (bytes) { + case 1: + val = ((const u8 *)data)[idx]; + break; + case 2: + data_u16 = (const u16 *)data + idx; + + /* + * Data is aligned to the sample size by IIO core. + * Call `get_unaligned_xe16` to hide type casting. + */ + if (endianness == IIO_BE) + val = get_unaligned_be16(data_u16); + else if (endianness == IIO_LE) + val = get_unaligned_le16(data_u16); + else /* IIO_CPU */ + val = *data_u16; + break; + default: + return -EINVAL; + } + + val >>= joy->chans[i].channel->scan_type.shift; + if (sign) + val = sign_extend32(val, msb); + else + val &= GENMASK(msb, 0); + input_report_abs(joy->input, joy->axes[i].code, val); + } + + input_sync(joy->input); + + return 0; +} + +static int adc_joystick_open(struct input_dev *dev) +{ + struct adc_joystick *joy = input_get_drvdata(dev); + struct device *devp = &dev->dev; + int ret; + + ret = iio_channel_start_all_cb(joy->buffer); + if (ret) + dev_err(devp, "Unable to start callback buffer: %d\n", ret); + + return ret; +} + +static void adc_joystick_close(struct input_dev *dev) +{ + struct adc_joystick *joy = input_get_drvdata(dev); + + iio_channel_stop_all_cb(joy->buffer); +} + +static void adc_joystick_cleanup(void *data) +{ + iio_channel_release_all_cb(data); +} + +static int adc_joystick_set_axes(struct device *dev, struct adc_joystick *joy) +{ + struct adc_joystick_axis *axes; + struct fwnode_handle *child; + int num_axes, error, i; + + num_axes = device_get_child_node_count(dev); + if (!num_axes) { + dev_err(dev, "Unable to find child nodes\n"); + return -EINVAL; + } + + if (num_axes != joy->num_chans) { + dev_err(dev, "Got %d child nodes for %d channels\n", + num_axes, joy->num_chans); + return -EINVAL; + } + + axes = devm_kmalloc_array(dev, num_axes, sizeof(*axes), GFP_KERNEL); + if (!axes) + return -ENOMEM; + + device_for_each_child_node(dev, child) { + error = fwnode_property_read_u32(child, "reg", &i); + if (error) { + dev_err(dev, "reg invalid or missing\n"); + goto err_fwnode_put; + } + + if (i >= num_axes) { + error = -EINVAL; + dev_err(dev, "No matching axis for reg %d\n", i); + goto err_fwnode_put; + } + + error = fwnode_property_read_u32(child, "linux,code", + &axes[i].code); + if (error) { + dev_err(dev, "linux,code invalid or missing\n"); + goto err_fwnode_put; + } + + error = fwnode_property_read_u32_array(child, "abs-range", + axes[i].range, 2); + if (error) { + dev_err(dev, "abs-range invalid or missing\n"); + goto err_fwnode_put; + } + + fwnode_property_read_u32(child, "abs-fuzz", &axes[i].fuzz); + fwnode_property_read_u32(child, "abs-flat", &axes[i].flat); + + input_set_abs_params(joy->input, axes[i].code, + axes[i].range[0], axes[i].range[1], + axes[i].fuzz, axes[i].flat); + input_set_capability(joy->input, EV_ABS, axes[i].code); + } + + joy->axes = axes; + + return 0; + +err_fwnode_put: + fwnode_handle_put(child); + return error; +} + +static int adc_joystick_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct adc_joystick *joy; + struct input_dev *input; + int error; + int bits; + int i; + + joy = devm_kzalloc(dev, sizeof(*joy), GFP_KERNEL); + if (!joy) + return -ENOMEM; + + joy->chans = devm_iio_channel_get_all(dev); + if (IS_ERR(joy->chans)) { + error = PTR_ERR(joy->chans); + if (error != -EPROBE_DEFER) + dev_err(dev, "Unable to get IIO channels"); + return error; + } + + /* Count how many channels we got. NULL terminated. */ + for (i = 0; joy->chans[i].indio_dev; i++) { + bits = joy->chans[i].channel->scan_type.storagebits; + if (!bits || bits > 16) { + dev_err(dev, "Unsupported channel storage size\n"); + return -EINVAL; + } + if (bits != joy->chans[0].channel->scan_type.storagebits) { + dev_err(dev, "Channels must have equal storage size\n"); + return -EINVAL; + } + } + joy->num_chans = i; + + input = devm_input_allocate_device(dev); + if (!input) { + dev_err(dev, "Unable to allocate input device\n"); + return -ENOMEM; + } + + joy->input = input; + input->name = pdev->name; + input->id.bustype = BUS_HOST; + input->open = adc_joystick_open; + input->close = adc_joystick_close; + + error = adc_joystick_set_axes(dev, joy); + if (error) + return error; + + input_set_drvdata(input, joy); + error = input_register_device(input); + if (error) { + dev_err(dev, "Unable to register input device\n"); + return error; + } + + joy->buffer = iio_channel_get_all_cb(dev, adc_joystick_handle, joy); + if (IS_ERR(joy->buffer)) { + dev_err(dev, "Unable to allocate callback buffer\n"); + return PTR_ERR(joy->buffer); + } + + error = devm_add_action_or_reset(dev, adc_joystick_cleanup, joy->buffer); + if (error) { + dev_err(dev, "Unable to add action\n"); + return error; + } + + return 0; +} + +static const struct of_device_id adc_joystick_of_match[] = { + { .compatible = "adc-joystick", }, + { } +}; +MODULE_DEVICE_TABLE(of, adc_joystick_of_match); + +static struct platform_driver adc_joystick_driver = { + .driver = { + .name = "adc-joystick", + .of_match_table = adc_joystick_of_match, + }, + .probe = adc_joystick_probe, +}; +module_platform_driver(adc_joystick_driver); + +MODULE_DESCRIPTION("Input driver for joysticks connected over ADC"); +MODULE_AUTHOR("Artur Rojek <contact@artur-rojek.eu>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/keyboard/ep93xx_keypad.c b/drivers/input/keyboard/ep93xx_keypad.c index 7c70492d9d6b..f831f01501d5 100644 --- a/drivers/input/keyboard/ep93xx_keypad.c +++ b/drivers/input/keyboard/ep93xx_keypad.c @@ -250,8 +250,8 @@ static int ep93xx_keypad_probe(struct platform_device *pdev) } keypad->irq = platform_get_irq(pdev, 0); - if (!keypad->irq) { - err = -ENXIO; + if (keypad->irq < 0) { + err = keypad->irq; goto failed_free; } diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c index 94c94d7f5155..d6c924032aaa 100644 --- a/drivers/input/keyboard/omap4-keypad.c +++ b/drivers/input/keyboard/omap4-keypad.c @@ -240,10 +240,8 @@ static int omap4_keypad_probe(struct platform_device *pdev) } irq = platform_get_irq(pdev, 0); - if (!irq) { - dev_err(&pdev->dev, "no keyboard irq assigned\n"); - return -EINVAL; - } + if (irq < 0) + return irq; keypad_data = kzalloc(sizeof(struct omap4_keypad), GFP_KERNEL); if (!keypad_data) { diff --git a/drivers/input/keyboard/twl4030_keypad.c b/drivers/input/keyboard/twl4030_keypad.c index af3a6824f1a4..77e0743a3cf8 100644 --- a/drivers/input/keyboard/twl4030_keypad.c +++ b/drivers/input/keyboard/twl4030_keypad.c @@ -50,7 +50,7 @@ struct twl4030_keypad { bool autorepeat; unsigned int n_rows; unsigned int n_cols; - unsigned int irq; + int irq; struct device *dbg_dev; struct input_dev *input; @@ -376,10 +376,8 @@ static int twl4030_kp_probe(struct platform_device *pdev) } kp->irq = platform_get_irq(pdev, 0); - if (!kp->irq) { - dev_err(&pdev->dev, "no keyboard irq assigned\n"); - return -EINVAL; - } + if (kp->irq < 0) + return kp->irq; error = matrix_keypad_build_keymap(keymap_data, NULL, TWL4030_MAX_ROWS, diff --git a/drivers/input/misc/soc_button_array.c b/drivers/input/misc/soc_button_array.c index 08520b3a18b8..cae1a3fae83a 100644 --- a/drivers/input/misc/soc_button_array.c +++ b/drivers/input/misc/soc_button_array.c @@ -11,6 +11,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/acpi.h> +#include <linux/dmi.h> #include <linux/gpio/consumer.h> #include <linux/gpio_keys.h> #include <linux/gpio.h> @@ -23,6 +24,7 @@ struct soc_button_info { unsigned int event_code; bool autorepeat; bool wakeup; + bool active_low; }; struct soc_device_data { @@ -42,22 +44,65 @@ struct soc_button_data { }; /* + * Some 2-in-1s which use the soc_button_array driver have this ugly issue in + * their DSDT where the _LID method modifies the irq-type settings of the GPIOs + * used for the power and home buttons. The intend of this AML code is to + * disable these buttons when the lid is closed. + * The AML does this by directly poking the GPIO controllers registers. This is + * problematic because when re-enabling the irq, which happens whenever _LID + * gets called with the lid open (e.g. on boot and on resume), it sets the + * irq-type to IRQ_TYPE_LEVEL_LOW. Where as the gpio-keys driver programs the + * type to, and expects it to be, IRQ_TYPE_EDGE_BOTH. + * To work around this we don't set gpio_keys_button.gpio on these 2-in-1s, + * instead we get the irq for the GPIO ourselves, configure it as + * IRQ_TYPE_LEVEL_LOW (to match how the _LID AML code configures it) and pass + * the irq in gpio_keys_button.irq. Below is a list of affected devices. + */ +static const struct dmi_system_id dmi_use_low_level_irq[] = { + { + /* + * Acer Switch 10 SW5-012. _LID method messes with home- and + * power-button GPIO IRQ settings. When (re-)enabling the irq + * it ors in its own flags without clearing the previous set + * ones, leading to an irq-type of IRQ_TYPE_LEVEL_LOW | + * IRQ_TYPE_LEVEL_HIGH causing a continuous interrupt storm. + */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire SW5-012"), + }, + }, + { + /* + * Acer One S1003. _LID method messes with power-button GPIO + * IRQ settings, leading to a non working power-button. + */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "One S1003"), + }, + }, + {} /* Terminating entry */ +}; + +/* * Get the Nth GPIO number from the ACPI object. */ -static int soc_button_lookup_gpio(struct device *dev, int acpi_index) +static int soc_button_lookup_gpio(struct device *dev, int acpi_index, + int *gpio_ret, int *irq_ret) { struct gpio_desc *desc; - int gpio; desc = gpiod_get_index(dev, NULL, acpi_index, GPIOD_ASIS); if (IS_ERR(desc)) return PTR_ERR(desc); - gpio = desc_to_gpio(desc); + *gpio_ret = desc_to_gpio(desc); + *irq_ret = gpiod_to_irq(desc); gpiod_put(desc); - return gpio; + return 0; } static struct platform_device * @@ -69,9 +114,8 @@ soc_button_device_create(struct platform_device *pdev, struct platform_device *pd; struct gpio_keys_button *gpio_keys; struct gpio_keys_platform_data *gpio_keys_pdata; + int error, gpio, irq; int n_buttons = 0; - int gpio; - int error; for (info = button_info; info->name; info++) if (info->autorepeat == autorepeat) @@ -91,8 +135,8 @@ soc_button_device_create(struct platform_device *pdev, if (info->autorepeat != autorepeat) continue; - gpio = soc_button_lookup_gpio(&pdev->dev, info->acpi_index); - if (!gpio_is_valid(gpio)) { + error = soc_button_lookup_gpio(&pdev->dev, info->acpi_index, &gpio, &irq); + if (error || irq < 0) { /* * Skip GPIO if not present. Note we deliberately * ignore -EPROBE_DEFER errors here. On some devices @@ -107,10 +151,18 @@ soc_button_device_create(struct platform_device *pdev, continue; } + /* See dmi_use_low_level_irq[] comment */ + if (!autorepeat && dmi_check_system(dmi_use_low_level_irq)) { + irq_set_irq_type(irq, IRQ_TYPE_LEVEL_LOW); + gpio_keys[n_buttons].irq = irq; + gpio_keys[n_buttons].gpio = -ENOENT; + } else { + gpio_keys[n_buttons].gpio = gpio; + } + gpio_keys[n_buttons].type = info->event_type; gpio_keys[n_buttons].code = info->event_code; - gpio_keys[n_buttons].gpio = gpio; - gpio_keys[n_buttons].active_low = 1; + gpio_keys[n_buttons].active_low = info->active_low; gpio_keys[n_buttons].desc = info->name; gpio_keys[n_buttons].wakeup = info->wakeup; /* These devices often use cheap buttons, use 50 ms debounce */ @@ -173,6 +225,7 @@ static int soc_button_parse_btn_desc(struct device *dev, } info->event_type = EV_ |